Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Solid-State Circuits Magazine

Algorithms and VLSI Architectures for Low-Density Parity-Check Codes: Part 1-Low-Complexity Iterative Decoding

Kiran Gunnam, Joan Marc Català Pérez, Francisco García-Herrero

Published Jan 1, 2016• 4 citations
Publisher

Abstract

This article is the first of a two-part tutorial about low-density parity-check (LDPC) codes. These codes have been firmly established as error-correction coding techniques for communication and storage channels.
DOI
10.1109/mssc.2016.2573938

Related papers

Low-density Parity-Check decoding Algorithms

Florent Pirou

Recently, low-density parity-check (LDPC) codes have attracted much attention because of their excellent error correcting performance and highly parallelizable decoding scheme. However, the effective VLSI implementation of and LDPC decoder remains a big challenge and is a crucial issue in determining how well we can exploit the benefits of the LDPC codes in the real applications. In this master thesis report, following a error coding background, we describe Low-Density Parity-Check codes and their decoding algorithm, and also requirements and architectures of LPDC decoder implementations.

•Jan 1, 2004•0 citations

A comprehensive Study of Decoding Algorithms for Low Density Parity-Check(LDPC)

C S Anil Kumar, M Vedhashri, L Vanditha +2 more

The near-capacity performance and effective decoding algorithms of Low-Density Parity-Check (LDPC) codes have made them a mainstay of contemporary error correction. With an emphasis on iterative techniques like the Belief Propagation (BP) algorithm, the Min-Sum algorithm, and their variations, this paper offers a thorough analysis of decoding algorithms for LDPC codes. We investigate the trade-offs between various algorithmic techniques’ computational complexity, decoding latency, and error correction performance. Particular focus is placed on new methods and hardware-friendly algorithms that are tailored for next-generation communication systems, such 5 G and beyond.

International Conference on Knowledge Engineering and Communication Systems (ICKECS)•Apr 28, 2025•0 citations

Iterative Decoding of Low-Density Parity Check Codes

Venkatesan Guruswami

Much progress has been made on decoding algorithms for error-correcting codes in the last decade. In this article, we give an introduction to some fundamental results on iterative, message-passing algorithms for low-density parity check codes. For certain important stochastic channels, this line of work has enabled getting very close to Shannon capacity with algorithms that are extremely ecient (both in theory and practice).

Bulletin of the European Association for Theoretical Computer Science•Jan 1, 2006•12 citations

Iterative Decoding of Low-Density Parity Check Codes (A Survey)

Venkatesan Guruswami

Much progress has been made on decoding algorithms for error-correcting codes in the last decade. In this article, we give an introduction to some fundamental results on iterative, message-passing algorithms for low-density parity check codes. For certain important stochastic channels, this line of work has enabled getting very close to Shannon capacity with algorithms that are extremely efficient (both in theory and practice).

arXiv:cs/0610022•Oct 5, 2006•19 citations

An Introduction to LDPC Codes

Irene Márquez-Corbella, Edgar Martínez-Moro

The focus of this chapter is on low-density parity-check (LDPC) codes and iterative decoding methods. Low density parity check codes were originally introduced by Gallager in his doctoral thesis in 1963 [19]. Gallager discussed several iterative decoding algorithms for these codes that in general have very good error-correcting capabilities. Later, Tanner [32] in 1981 gave a graphical interpretation to these codes as a bi-partite graph whose incidence matrix is the parity check matrix of the LDPC code, and showed how to view the iterative decoding algorithms as message-passing algorithms on these graphs.

Series on coding theory and cryptology•Feb 1, 2013•4 citations

Resource efficient flexible architectures for low-density parity-check decoders

Vikram Arkalgud Chandrasetty

Digital communication has become part of most applications we use today.It could be for internet access using WLAN/WiMAX technology or satellite based Digital Video Broadcasting (DVB) or even mobile applications.It may be possible to achieve very high communication bandwidth for these applications.But the problem is with the reliability of information received over the communication channel that is often subjected to noise.The obvious solution to this problem is incorporating error correction techniques in the communication system to correct the errors introduced during transit.One of the best performing error correction codes are Low-Density Parity-Check (LDPC) codes discovered by Gallager in 1962, but these codes only gained popularity over the last decade or so.LDPC codes can achieve excellent bit error rate (BER) performance and are very suitable for next-generation communication systems.Studies have shown that large LDPC codes can achieve BER performance very close to the Shannon Limit.Hence these codes are of paramount interest among the research community.However, practical implementation of high performance LDPC decoders with large code lengths is a challenge faced by designers today due to the huge complexity and hardware resources required.This research aims to reduce the complexity of LDPC decoding algorithms and explore resource efficient architectures for hardware implementation.LDPC decoders are primarily based on iterative algorithms and typically consist of large number of computational nodes, with complex interconnections among the nodes.A fully-parallel implementation of LDPC decoder with large code length can provide high throughput, but is costly in terms of hardware resources required.Even today's high-end FPGAs

•Jan 1, 2012•0 citations
Recently, low-density parity-check (LDPC) codes have attracted much attention because of their excellent error correcting performance and highly parallelizable decoding scheme. However, the effective VLSI implementation of and LDPC decoder remains a big challenge and is a crucial issue in determining how well we can exploit the benefits of the LDPC codes in the real applications. In this master thesis report, following a error coding background, we describe Low-Density Parity-Check codes and their decoding algorithm, and also requirements and architectures of LPDC decoder implementations.
The near-capacity performance and effective decoding algorithms of Low-Density Parity-Check (LDPC) codes have made them a mainstay of contemporary error correction. With an emphasis on iterative techniques like the Belief Propagation (BP) algorithm, the Min-Sum algorithm, and their variations, this paper offers a thorough analysis of decoding algorithms for LDPC codes. We investigate the trade-offs between various algorithmic techniques’ computational complexity, decoding latency, and error correction performance. Particular focus is placed on new methods and hardware-friendly algorithms that are tailored for next-generation communication systems, such 5 G and beyond.
The focus of this chapter is on low-density parity-check (LDPC) codes and iterative decoding methods. Low density parity check codes were originally introduced by Gallager in his doctoral thesis in 1963 [19]. Gallager discussed several iterative decoding algorithms for these codes that in general have very good error-correcting capabilities. Later, Tanner [32] in 1981 gave a graphical interpretation to these codes as a bi-partite graph whose incidence matrix is the parity check matrix of the LDPC code, and showed how to view the iterative decoding algorithms as message-passing algorithms on these graphs.
Digital communication has become part of most applications we use today.It could be for internet access using WLAN/WiMAX technology or satellite based Digital Video Broadcasting (DVB) or even mobile applications.It may be possible to achieve very high communication bandwidth for these applications.But the problem is with the reliability of information received over the communication channel that is often subjected to noise.The obvious solution to this problem is incorporating error correction techniques in the communication system to correct the errors introduced during transit.One of the best performing error correction codes are Low-Density Parity-Check (LDPC) codes discovered by Gallager in 1962, but these codes only gained popularity over the last decade or so.LDPC codes can achieve excellent bit error rate (BER) performance and are very suitable for next-generation communication systems.Studies have shown that large LDPC codes can achieve BER performance very close to the Shannon Limit.Hence these codes are of paramount interest among the research community.However, practical implementation of high performance LDPC decoders with large code lengths is a challenge faced by designers today due to the huge complexity and hardware resources required.This research aims to reduce the complexity of LDPC decoding algorithms and explore resource efficient architectures for hardware implementation.LDPC decoders are primarily based on iterative algorithms and typically consist of large number of computational nodes, with complex interconnections among the nodes.A fully-parallel implementation of LDPC decoder with large code length can provide high throughput, but is costly in terms of hardware resources required.Even today's high-end FPGAs