Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Series on coding theory and cryptology

An Introduction to LDPC Codes

Irene Márquez-Corbella, Edgar Martínez-Moro

Published Feb 1, 2013• 4 citations
Publisher

Abstract

The focus of this chapter is on low-density parity-check (LDPC) codes and iterative decoding methods. Low density parity check codes were originally introduced by Gallager in his doctoral thesis in 1963 [19]. Gallager discussed several iterative decoding algorithms for these codes that in general have very good error-correcting capabilities. Later, Tanner [32] in 1981 gave a graphical interpretation to these codes as a bi-partite graph whose incidence matrix is the parity check matrix of the LDPC code, and showed how to view the iterative decoding algorithms as message-passing algorithms on these graphs.

DOI
10.1142/9789814335768_0004

Related papers

Low-density parity-check codes

Sarah J. Johnson

Introduction In this chapter we introduce low-density parity-check (LDPC) codes, a class of error correction codes proposed by Gallager in his 1962 PhD thesis 12 years after error correction codes were first introduced by Hamming (published in 1950). Both Hamming codes and LDPC codes are block codes: the messages are broken up into blocks to be encoded at the transmitter and similarly decoded as separate blocks at the receiver. While Hamming codes are short and very structured with a known, fixed, error correction ability, LDPC codes are the opposite, usually long and often constructed pseudo-randomly with only a probabilistic notion of their expected error correction performance. The chapter begins by presenting parity bits as a means to detect and, when more than one is employed, to correct errors in digital data. Block error correction codes are described as a linear combination of parity-check equations and thus defined by their parity-check matrix representation. The graphical representation of codes by Tanner graphs is presented and the necessary graph theoretic concepts introduced. In Section 2.4 iterative decoding algorithms are introduced using a hard decision algorithm (bit flipping), so that the topic is developed first without reference to probability theory. Subsequently the sum–product decoding algorithm is presented. This chapter serves as a self-contained introduction to LDPC codes and their decoding. It is intended that the material presented here will enable the reader to implement LDPC encoders and iterative decoders.

Cambridge University Press eBooks•Nov 19, 2009•6 citations

Low-Density Parity-Check Codes

W.E. Ryan, Shu Lin

Low-density parity-check (LDPC) codes are a class of linear block codes with implementable decoders, which provide near-capacity performance on a large set of data-transmission and data-storage channels. LDPC codes were invented by Gallager in his 1960 doctoral dissertation and were mostly ignored during the 35 years that followed. One notable exception is the important work of Tanner in 1981, in which Tanner generalized LDPC codes and introduced a graphical representation of LDPC codes, now called a Tanner graph. The study of LDPC codes was resurrected in the mid 1990s with the work of MacKay, Luby, and others [3–6], who noticed, apparently independently of Gallager's work, the advantages of linear block codes with sparse (low-density) parity-check matrices.

Cambridge University Press eBooks•Sep 17, 2009•6 citations

Decoding algorithms for LDPC codes transmitted over channels with ISI

T. Friedlander, David Burshtein

Summary form only given. LDPC (low density parity check) codes (Gallager (1963)) are linear parity check codes with a sparse parity check matrix. In our work Gallager's original decoding algorithm is extended to alleviate the problem of channel with finite memory. Two decoding algorithms are derived. The basic algorithm tracks the original derivation of Gallager with the necessary adaptations. This results in a single usage of the BCJR algorithm, whereas the iterative part remains intact.. The second algorithm is a generalization of the first. While the basic algorithm only utilizes the correlation among adjacent digits to achieve an improved estimation of the prior probabilities, the generalized algorithm also exploits the information lying in the parity checks in which the adjacent digits participate. This results in modified rightbound messages. The generalized algorithm is asymptotically optimal in the sense of achieved bit error rate based on the information extracted from a given number of adjacent digits.

IEEE Convention of Electrical and Electronics Engineers in Israel•Jun 26, 2003•2 citations

Low-density parity-check codes: asymptotic behavior and zeta functions

Wen-Ching Winnie Li, Min Lü

A LDPC code is binary linear code equipped with a sparse parity-check matrix. A bipartite graph, called Tanner graph, can be associated to a parity-check matrix. Then message passing iterative decoding (MPID) algorithms can be applied on the Tanner graph to do fast efficient decoding. Richardson and Urbanke proposed a scheme, called density evolution, to analyze the performance of MPID algorithms. Using density evolution we shall report new approaches to designing asymptotically good LDPC code ensembles over binary erasure channel (BEC). We then answer an open question raised by Shokrollahi and Oswald during their study on capacity-achieving sequences over BEC. Next, in order to understand MPID algorithms better we bring up the discussion of pseudo-codewords, which are regarded as the cause of decoding errors. We shall present two rational functions whose monomials in the Taylor expansion enumerate all the pseudo-codewords of a general binary parity-check code.

•Jan 1, 2009•1 citation

Low‐Density Parity‐Check Codes

Christian B. Schlegel, Lance C. Pérez

Low-density parity-check (LDPC) codes can rightfully take their stand next to turbo codes as the most powerful and most popular error control codes known. They offer a performance spectacularly close to theoretical limits when decoded using iterative soft decision algorithms. This chapter explores the properties and structure of low-density parity-check codes. It begins with the fundamental construction of regular LDPC codes and their representation as bipartite graphs. The graphical representation of LDPC codes then leads to the notion of irregular LDPC codes, which have been used to improve performance, and to the density evolution analysis technique, which predicts the performance of these codes.

Wiley eBooks•Aug 29, 2015•6 citations

Capacity-Approaching Low-Density Parity-Check Codes

Pierre J. Garrigues

The class of low-density parity-check (LDPC) codes was introduced by Gallager in his thesis in 1961 [2]. Until the invention of turbo codes, they were largely neglected, but received a lot of interest lately, due to the possibility of designing LDPC codes within 0.0045 dB of the Shannon limit. We review in this project techniques used to analyze the performance of LDPC codes under a message-passing decoding algorithm, namely belief propagation (BP) [4][5]. This analysis gives us the tools to design good LDPC codes. We will first take the simpler example of transmission over the class of binary erasure channels (BEC). We will then see how it is possible to extend the results for the BEC to the much more general class of symmetric channels.

•Jan 1, 2005•0 citations
The focus of this chapter is on low-density parity-check (LDPC) codes and iterative decoding methods. Low density parity check codes were originally introduced by Gallager in his doctoral thesis in 1963 [19]. Gallager discussed several iterative decoding algorithms for these codes that in general have very good error-correcting capabilities. Later, Tanner [32] in 1981 gave a graphical interpretation to these codes as a bi-partite graph whose incidence matrix is the parity check matrix of the LDPC code, and showed how to view the iterative decoding algorithms as message-passing algorithms on these graphs.
Introduction In this chapter we introduce low-density parity-check (LDPC) codes, a class of error correction codes proposed by Gallager in his 1962 PhD thesis 12 years after error correction codes were first introduced by Hamming (published in 1950). Both Hamming codes and LDPC codes are block codes: the messages are broken up into blocks to be encoded at the transmitter and similarly decoded as separate blocks at the receiver. While Hamming codes are short and very structured with a known, fixed, error correction ability, LDPC codes are the opposite, usually long and often constructed pseudo-randomly with only a probabilistic notion of their expected error correction performance. The chapter begins by presenting parity bits as a means to detect and, when more than one is employed, to correct errors in digital data. Block error correction codes are described as a linear combination of parity-check equations and thus defined by their parity-check matrix representation. The graphical representation of codes by Tanner graphs is presented and the necessary graph theoretic concepts introduced. In Section 2.4 iterative decoding algorithms are introduced using a hard decision algorithm (bit flipping), so that the topic is developed first without reference to probability theory. Subsequently the sum–product decoding algorithm is presented. This chapter serves as a self-contained introduction to LDPC codes and their decoding. It is intended that the material presented here will enable the reader to implement LDPC encoders and iterative decoders.
Low-density parity-check (LDPC) codes are a class of linear block codes with implementable decoders, which provide near-capacity performance on a large set of data-transmission and data-storage channels. LDPC codes were invented by Gallager in his 1960 doctoral dissertation and were mostly ignored during the 35 years that followed. One notable exception is the important work of Tanner in 1981, in which Tanner generalized LDPC codes and introduced a graphical representation of LDPC codes, now called a Tanner graph. The study of LDPC codes was resurrected in the mid 1990s with the work of MacKay, Luby, and others [3–6], who noticed, apparently independently of Gallager's work, the advantages of linear block codes with sparse (low-density) parity-check matrices.
Summary form only given. LDPC (low density parity check) codes (Gallager (1963)) are linear parity check codes with a sparse parity check matrix. In our work Gallager's original decoding algorithm is extended to alleviate the problem of channel with finite memory. Two decoding algorithms are derived. The basic algorithm tracks the original derivation of Gallager with the necessary adaptations. This results in a single usage of the BCJR algorithm, whereas the iterative part remains intact.. The second algorithm is a generalization of the first. While the basic algorithm only utilizes the correlation among adjacent digits to achieve an improved estimation of the prior probabilities, the generalized algorithm also exploits the information lying in the parity checks in which the adjacent digits participate. This results in modified rightbound messages. The generalized algorithm is asymptotically optimal in the sense of achieved bit error rate based on the information extracted from a given number of adjacent digits.
A LDPC code is binary linear code equipped with a sparse parity-check matrix. A bipartite graph, called Tanner graph, can be associated to a parity-check matrix. Then message passing iterative decoding (MPID) algorithms can be applied on the Tanner graph to do fast efficient decoding. Richardson and Urbanke proposed a scheme, called density evolution, to analyze the performance of MPID algorithms. Using density evolution we shall report new approaches to designing asymptotically good LDPC code ensembles over binary erasure channel (BEC). We then answer an open question raised by Shokrollahi and Oswald during their study on capacity-achieving sequences over BEC. Next, in order to understand MPID algorithms better we bring up the discussion of pseudo-codewords, which are regarded as the cause of decoding errors. We shall present two rational functions whose monomials in the Taylor expansion enumerate all the pseudo-codewords of a general binary parity-check code.
Low-density parity-check (LDPC) codes can rightfully take their stand next to turbo codes as the most powerful and most popular error control codes known. They offer a performance spectacularly close to theoretical limits when decoded using iterative soft decision algorithms. This chapter explores the properties and structure of low-density parity-check codes. It begins with the fundamental construction of regular LDPC codes and their representation as bipartite graphs. The graphical representation of LDPC codes then leads to the notion of irregular LDPC codes, which have been used to improve performance, and to the density evolution analysis technique, which predicts the performance of these codes.
The class of low-density parity-check (LDPC) codes was introduced by Gallager in his thesis in 1961 [2]. Until the invention of turbo codes, they were largely neglected, but received a lot of interest lately, due to the possibility of designing LDPC codes within 0.0045 dB of the Shannon limit. We review in this project techniques used to analyze the performance of LDPC codes under a message-passing decoding algorithm, namely belief propagation (BP) [4][5]. This analysis gives us the tools to design good LDPC codes. We will first take the simpler example of transmission over the class of binary erasure channels (BEC). We will then see how it is possible to extend the results for the BEC to the much more general class of symmetric channels.