The design of a hi-Q resonant RF cavity with coupled detection scheme and associated instrumentation is reported for studying quantum vacuum within the framework of Quantum Electrodynamics (QED), the quantum theory of interaction of matter with radiation. Although this system could possibly serve in any general QED, cavity QED and RF applications in the range of a few GHz, the design was specifically devised for an experiment in studying intrinsic noise in quantum vacuum owing to vacuum fluctuations, which we call “Eavesdropping on Vacuum”. The center frequency of the cavity is 2.75GHz (which may be modified slightly to around 2.5GHz band for use in contemporary WiLAN and WiFi RF applications), with a high Q value. Initial design is made using copper but in the next stage it will be replaced with Niobium for use in low-temperature (around 0.1-0.3K) studies, making it an SRF (Superconducting Radio Frequency) cavity. A carefully devised scheme of sensitive RF detectors and ultra-low-noise cryogenic Low-Noise Amplifiers (cLNA) is an integral part of the cavity system. Detection element is an array of cavity-backed Au or Au-NbN spiral antennas in association with GaAs Schottky Barrier Diodes (SBD's), in conjunction with GaAs/InP HEMT's working in the GHz to THz regime. External fields are achieved with the help of time-dependent RF fields delivered to the cavity with the help of an antenna coupled with a GaAs Resonant Tunneling Diode (RTD). In addition to the cavity design, this report presents an overview of the detection scheme as well as necessary instrumentation, including RF detection, amplification, and the DAQ (Data Acquisition) required for digital read-out.
The design of a hi-Q resonant RF cavity with coupled detection scheme and associated instrumentation is reported for studying quantum vacuum within the framework of Quantum Electrodynamics (QED), the quantum theory of interaction of matter with radiation. Although this system could possibly serve in any general QED, cavity QED and RF applications in the range of a few GHz, the design was specifically devised for an experiment in studying intrinsic noise in quantum vacuum owing to vacuum fluctuations, which we call “Eavesdropping on Vacuum”. The center frequency of the cavity is 2.75GHz (which may be modified slightly to around 2.5GHz band for use in contemporary WiLAN and WiFi RF applications), with a high Q value. Initial design is made using copper but in the next stage it will be replaced with Niobium for use in low-temperature (around 0.1-0.3K) studies, making it an SRF (Superconducting Radio Frequency) cavity. A carefully devised scheme of sensitive RF detectors and ultra-low-noise cryogenic Low-Noise Amplifiers (cLNA) is an integral part of the cavity system. Detection element is an array of cavity-backed Au or Au-NbN spiral antennas in association with GaAs Schottky Barrier Diodes (SBD's), in conjunction with GaAs/InP HEMT's working in the GHz to THz regime. External fields are achieved with the help of time-dependent RF fields delivered to the cavity with the help of an antenna coupled with a GaAs Resonant Tunneling Diode (RTD). In addition to the cavity design, this report presents an overview of the detection scheme as well as necessary instrumentation, including RF detection, amplification, and the DAQ (Data Acquisition) required for digital read-out.
The design and development of a cryogenic Ultra-Low-Noise Signal Amplification (ULNA) and detection system for spectroscopy of ultra-cold systems are reported here for the operation in the 0.5 - 4 GHz spectrum of frequencies (the “L” and “S” microwave bands). The design is suitable for weak RF signal detection and spectroscopy from ultra-cold systems confined in cryogenic RF cavities, as entailed in a number of physics, physical chemistry and analytical chemistry applications, such as NMR/NQR/EPR and microwave spectroscopy, Paul traps, Bose-Einstein Condensates (BEC’s) and cavity Quantum Electrodynamics (cQED). Using a generic Low-Noise Amplifier (LNA) architecture for a GaAs enhancement mode High-Electron Mobility FET device, our design has especially been devised for scientific applications where ultra-low-noise amplification systems are sought to amplify and detect weak RF signals under various conditions and environments, including cryogenic temperatures, with the least possible noise susceptibility. The amplifier offers a 16 dB gain and a 0.8 dB noise figure at 2.5 GHz, while operating at room temperature, which can improve significantly at low temperatures. Both dc and RF outputs are provided by the amplifier to integrate it in a closed-loop or continuous-wave spectroscopy system or connect it to a variety of instruments, a factor which is lacking in commercial LNA devices. Following the amplification stage, the RF signal detection is carried out with the help of a post-amplifier and detection system based upon a set of Zero-Bias Schottky Barrier Diodes (ZBD’s) and a high-precision ultra-low noise jFET operational amplifier. The scheme offers unique benefits of sensitive detection and very-low noise amplification for measuring extremely weak on-resonance signals with substantial low- noise response and excellent stability while eliminating complicated and expensive heterodyne schemes. The LNA stage is fully capable to be a part of low-temperature experiments while being operated in cryogenic conditions down to about 500 mK.
Three-dimensional radio frequency cavities demonstrate excellent frequency selectivity and, as such, are known for their use in RF filters. These cavities have potential applications in quantum information science, precision displacement metrology, and quantum electrodynamics. Additionally, coupled cavities that form a spectral doublet allow for parametric gain when incorporating mechanical elements. Here, we investigate normal-mode splitting in a pair of quarter-wave stub microwave cavities at room temperature and cryogenic environments in order to identify coupling mechanics for normal and superconducting systems. Superconducting quarter-wave stub cavities with a resonant frequency of 10 GHz are made from reactor-grade niobium and exhibit Q ranging from 105 to 109. We varied cavity-to-cavity coupling to observe several normal-mode splittings of increasing peak separation until we observed a mode crossing. The minimum observed peak separation was 7 MHz for room temperature tests and 200 kHz for cryogenic tests. We also report on values of an intrinsic quality factor for the tuning cavity as a dielectric rod is translated along its symmetry axis. The realization of coupled superconducting radio frequency (SRF) cavities of this type is a necessary step toward implementation of parametric SRF-mechanical gain.
Radio frequency (RF) signals are frequently used in emerging quantum applications due to their spin state manipulation capability. Efficient coupling of RF signals into a particular quantum system requires the utilization of carefully designed and fabricated antennas. Nitrogen vacancy (NV) defects in diamond are commonly utilized platforms in quantum sensing experiments with the optically detected magnetic resonance (ODMR) method, where an RF antenna is an essential element. We report on the design and fabrication of high efficiency coplanar RF antennas for quantum sensing applications. Single and double ring coplanar RF antennas were designed with -37 dB experimental return loss at 2.87 GHz, the zero-field splitting frequency of the negatively charged NV defect in diamond. The efficiency of both antennas was demonstrated in magnetic field sensing experiments with NV color centers in diamond. An RF amplifier was not needed, and the 0 dB output of a standard RF signal generator was adequate to run the ODMR experiments due to the high efficiency of the RF antennas.
The terahertz regime, as a last radio window, remains to be fully explored, and astronomical and atmospheric observations in this regime are scientifically important. Like other frequency regimes, developing high-sensitivity detectors (coherent and incoherent) is of particular significance for both ground-based and space-borne facilities. As the coherent detector of choice below 1.4 THz, superconductor-insulator-superconductor (SIS) heterodyne mixers have achieved as high a sensitivity as five times the quantum limit around 1.4 THz. It is, however, still a challenge to developing SIS mixers at frequencies beyond 1.4 THz with considerable transmission loss in superconducting circuits due to the Cooper-pair breaking by energetic photons and increased many difficulties in designing and fabricating. So far, superconducting hot electron bolometer (HEB) mixers have been the most sensitive heterodyne detectors at frequencies above 1.5 THz, and successfully used to detect molecular spectral lines up to 2.5 THz from ground-based and space telescopes. Although spiral-antenna coupled NbN HEB mixers show a good sensitivity in the whole THz frequency range, the directly measured spectral response with Fourier transform spectrometer falls quickly as frequency increases, especially above 3 THz. The terahertz band is also of particular importance to observe astronomical objects such as cosmic microwave background, early distant objects, cold objects and dusty objects. Aiming at such objects, we develop a terahertz imaging array system by combining advanced superconducting detectors such as transition edge sensor (TES) and microwave kinetic inductance detectors (MKIDs), thus the system has a frequency band centred at 350 m, an operational temperature of 0.3 K, and a sensitivity reaching background limit performance for ground-based applications. In addition, it is expected to have some breakthroughs in ultra-sensitive superconducting TES and MKID, low noise multi-channel readout and multiplexing, efficient terahertz-wave coupling technology, and large-scale array system integration. The developed terahertz imaging array system will serve as the next-generation instrument of Dome A 5 m terahertz telescope, conducting a 350 m-band legacy survey for studying the planets, stars, galaxies and cosmology. Besides the application in astronomy, the developed terahertz imaging array system can also be applied to some areas requiring rapid detection such as security, deep space exploration, and biomedical imaging. In this paper, we mainly introduce the superconducting detectors developed at Purple Mountain Observatory and those for international collaborative projects.
Abstract Here we consider a tunable superconducting cavity that can be used either as a tunable coupler to a qubit inside the cavity or as a tunable low noise, low temperature, RF filter. Our design consists of an array of radio-frequency superconducting quantum interference devices (rf SQUIDs) inside a superconducting cavity. This forms a tunable metamaterial structure which couples to the cavity through its magnetic plasma frequency. By tuning the resonant frequency of the metamaterial through an applied magnetic flux, one can tune the cavity mode profile. This allows us to detune the cavity initially centered at 5.593 GHz by over 200 MHz. The maximum quality factor approaches that of the empty cavity, which is 4.5 × 106. The metamaterial electromagnetic response is controlled via a low-frequency or dc magnetic flux bias, and we present a control line architecture that is capable of applying sufficient magnetic flux bias with minimal parasitic coupling. Together this design allows for an in-situ tunable cavity which enables low-temperature quantum control applications.
Cavity quantum electrodynamics explores the dynamics and manipulation of quantized electromagnetic fields and atomic systems coherently coupled inside an electromagnetic resonator or cavity. High-quality, small-volume cavities have been exploited as the critical component in numerous promising schemes for developing quantum technology in this era of quantum revolution.\n \n Within this context, this thesis investigates various prospective quantum technology based on atom-cavity systems, from new optical-cavity designs, through to cavity-enhanced single-photon sources in diamond for secure communication, quantum controls for photon pulse-shaping, qubit preparation and implementing faster quantum gates, and finally novel metamaterials built of cavity-arrays.\n \n The discussion begins with a proposal of novel slot-waveguide cavity designs for visible wavelength operations. Optimization to minimize cavity mode volumes in these structures is conducted, showing that they are capable of generating stronger atom-photon couplings than state-of-the-art cubic-wavelength cavities. The use of the diamond colour centres are then reviewed with original work carried out to show that spectral bandwidth/purity, emission rate, quantum efficiency and reliability can be improved by the use of cavities. These results improve the prospects of the centres for practical applications in long-distance, high-speed quantum communication.\n \n Next, a dynamic control for modifying effective cavity properties in a coupled-cavity arrangement is introduced. The scheme can be applied to perform reversible switching of single photons into and out of cavities, and temporal shaping and time-encoding of single photons. The reversible photon-switching control is applied to implement a two-qubit quantum gate, which by breaking the time-bandwidth limitation, outperforms comparable passive devices.\n \n Finally, we present a novel metamaterial design based on cavity-arrays and coupled atom-cavity systems, which can be used to engineer anomalous light response and complex waveguiding properties. In particular, as an introductory application, demonstrations of superlensing effects, which are pertinent for subwavelength imaging, are presented.