Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Novel quantum technology based on atom-cavity physics

Chun‐Hsu Su

Published Jan 1, 2010• 5 citations
OpenAlex

Abstract

Cavity quantum electrodynamics explores the dynamics and manipulation of quantized electromagnetic fields and atomic systems coherently coupled inside an electromagnetic resonator or cavity. High-quality, small-volume cavities have been exploited as the critical component in numerous promising schemes for developing quantum technology in this era of quantum revolution.\n \n Within this context, this thesis investigates various prospective quantum technology based on atom-cavity systems, from new optical-cavity designs, through to cavity-enhanced single-photon sources in diamond for secure communication, quantum controls for photon pulse-shaping, qubit preparation and implementing faster quantum gates, and finally novel metamaterials built of cavity-arrays.\n \n The discussion begins with a proposal of novel slot-waveguide cavity designs for visible wavelength operations. Optimization to minimize cavity mode volumes in these structures is conducted, showing that they are capable of generating stronger atom-photon couplings than state-of-the-art cubic-wavelength cavities. The use of the diamond colour centres are then reviewed with original work carried out to show that spectral bandwidth/purity, emission rate, quantum efficiency and reliability can be improved by the use of cavities. These results improve the prospects of the centres for practical applications in long-distance, high-speed quantum communication.\n \n Next, a dynamic control for modifying effective cavity properties in a coupled-cavity arrangement is introduced. The scheme can be applied to perform reversible switching of single photons into and out of cavities, and temporal shaping and time-encoding of single photons. The reversible photon-switching control is applied to implement a two-qubit quantum gate, which by breaking the time-bandwidth limitation, outperforms comparable passive devices.\n \n Finally, we present a novel metamaterial design based on cavity-arrays and coupled atom-cavity systems, which can be used to engineer anomalous light response and complex waveguiding properties. In particular, as an introductory application, demonstrations of superlensing effects, which are pertinent for subwavelength imaging, are presented.

Related papers

Pulse shaping by coupled cavities: Single photons and qudits

Chun‐Hsu Su, Andrew D. Greentree, William J. Munro +2 more

Dynamic coupling of cavities to a quantum network is of major interest to distributed quantum information processing schemes based on cavity quantum electrodynamics. This can be achieved by actively tuning a mediating atom-cavity system. In particular, we consider the dynamic coupling between two coupled cavities, each interacting with a two-level atom, realized by tuning one of the atoms. One atom-field system can be controlled to become maximally and minimally coupled with its counterpart, allowing high fidelity excitation confinement, $Q$ switching, and reversible state transport. As an application, we first show that simple tuning can lead to emission of near-Gaussian single-photon pulses that is significantly different from the usual exponential decay in a passive cavity-based system. The influences of cavity loss and atomic spontaneous emission are studied in detailed numerical simulations, showing the practicality of these schemes within the reach of current experimental solid-state technology. We then show that when the technique is employed to an extended coupled-cavity scheme involving a multilevel atom, arbitrary temporal superposition of single photons can be engineered in a deterministic way.

arXiv:0906.2690•Physical Review A•Sep 9, 2009•15 citations

Focus section on Cavity QED

Wolfgang Lange, Jean‐Michel Gérard

A single two-level emitter coupled to a single mode of an electromagnetic resonator constitutes the most fundamental instance of light--matter interaction. Realizations of this type of system are investigated in the field of cavity quantum electrodynamics (cavity QED). Particularly important are schemes in which the coupling is strong enough to exceed the spontaneous emission rate as well as cavity damping. In this case, the coherent exchange of excitation between source and photon is the dominating process, providing the unique possibility to deterministically control the quantum evolution of the system. Great progress has recently been accomplished, technologically as well as conceptually, and the focus section in this issue of Journal of Optics B: Quantum and Semiclassical Optics features five articles highlighting important recent developments in the field. Strong coupling between single atoms and the electromagnetic cavity field have been achieved in two distinct regimes, the optical and the microwave region. The latter is represented by the micromaser, a high-Q microwave cavity pumped by a beam of highly excited Rydberg atoms. It has proved to be an almost ideal system for the generation of non-classical field states. A constraint in these experiments is the fact that the field inside the cavity can only be examined indirectly, by analysing the occupation of atoms leaving the cavity. While only two atomic states were previously identified for this purpose, V A Reshetov shows in his article (pages 119--126) that more information on the field may be extracted by taking advantage of the Zeeman substructure of the atomic levels. In the optical domain of cavity QED, by contrast, the state of the resonator field may be probed directly by measuring the light leaking from the cavity using photodetectors. In order to minimize damping, high-quality cavities must be employed. In most optical experiments these are Fabry--Perot resonators with ultra-high reflectivity mirrors, with losses as low as a few parts per million being state of the art. At the same time, the coupling of atoms and photons is enhanced by reducing the length of the cavity, so that strong coupling conditions are reached. A very attractive application of this type of cavity QED setup is the possibility of exerting control over the quantum dynamics of the system. An impressive example is the implementation of quantum feedback, reported in the paper by W P Smith and L A Orozco (pages 127--134). Using information gained from detecting a single photon escaping from the cavity, active feedback is applied to halt the dynamical evolution of the system. This is the first time active feedback has been used to modify the quantum evolution of a system at the single-photon level. The authors discuss how detunings between the subsystems affect the quantum feedback, an issue particularly relevant for ensembles of atoms with a spread in detuning. Perfect quantum feedback in this case requires the use of additional parameters to control the system. The majority of optical cavity QED experiments performed so far have used as a medium atoms traversing the cavity on random trajectories, such as, for example, thermal atomic beams. In this case, the observation of quantum effects is degraded in two ways. The Doppler effect and the finite transit time lead to line broadening, while the spatial structure of the cavity mode results in atoms in different locations experiencing different coupling with the photonic field. J E Reiner et al (pages 135--142) investigate the impact of these effects on quantum fluctuations in their cavity QED system. In order to overcome line broadening, they have developed a continuous cold atomic beam, extracted from a magneto-optical trap. An even better control of broadening effects and fluctuating coupling strength is provided by trapping the atoms inside the cavity and cooling them to temperatures at which their position spread is smaller than the optical wavelength. Much recent activity has been devoted to developing such an ultimate cavity QED system. A Vukics et al (pages 143--153) present a theoretical proposal for dynamically trapping and cooling atoms inside a cavity. By driving the atoms with a standing wave injected from the side of the cavity and by weakly exciting the cavity field itself, they predict three-dimensional trapping of the atom for periods around 1 second, an extremely long time on the typical scale of cavity QED dynamics. The essential component of their scheme is the interference between the two driving fields, determining the temperature of the particle and the stable trapping positions. In the quest for better confinement of radiation, lately, an appealing alternative to the Fabry--Perot cavity has been investigated -- the optical microsphere resonator. A sphere with a diameter of a few tens of microns, it supports so-called whispering gallery modes near its circumference, for which quality factors up to 10 10 have been measured. In order to exploit the correspondingly low field damping rates for cavity QED, a method must be found to couple atomic or solid state emitters to these modes. S Göotzinger et al (pages 154--158) report the coupling of single nanocrystals on the surface of a microsphere through the evanescent field of the mode. Selective excitation of a single nano-emitter was accomplished with a scanning confocal microscope. The system is a promising candidate for cavity QED with single-quantum emitters. The ability to fully control the quantum dynamics of atoms and light is beginning to spawn early applications. The most notable example is quantum information processing. This requires the coherent manipulation of single-quantum systems, which is ideally provided by cavity QED interaction in the strong-coupling limit. The development of practical devices will be among the principal future tasks for research in the field. This will include physical systems, which have not been covered in this issue, such as semiconductors, quantum dots as emitters, or photonic crystals as resonator structures. Cavity QED is therefore guaranteed to remain a vigorous field in the years to come.

Journal of Optics B Quantum and Semiclassical Optics•Feb 1, 2004•0 citations

Atom-light couplers with one, two and ten billion atoms

Daniel B. Higginbottom

Devices that harness the surprising properties of quantum systems at scale hold the possibility of revolutionary advances in information technology. Algorithms for quantum computers can take advantage of quantum parallelism to solve problems that are intractable with classical hardware, including prime factorization and simulating chemical processes. A quantum communication network that carries qubits instead of bits can leverage the irreversibility of projective measurement to guarantee secure communication. Because quantum states are fragile, building such devices requires exquisite control over many isolated quantum systems. One of the most critical capabilities is the interaction of stationary and flying qubits. In this thesis we consider how to engineer atom-light interactions as an interface for networked quantum systems. Quantum atom-light couplers require the efficient and reversible interaction of atomic and optical qubits, but the natural interaction of atoms and photons is weak. It is this very lack of interaction between light and its environment that makes light such an excellent carrier of quantum information. There are three promising strategies for stronger coherent atom-light interactions. First, the light field may be confined to a cavity so that it interacts with the atom over a longer time. Second, the light field may be focussed to a small spot with high aperture optics and matched to the natural atomic radiation pattern. Third, we may pass the light field through an ensemble of many atoms and store the qubit in a distributed state. In practice, atom-light couplers employ some combination of all three strategies. We will focus our research on the second two approaches: first by coupling one and two trapped ions with high aperture optics, and then operating a quantum optical memory with an ensemble of approximately 10 billion neutral atoms. Atoms that have been ionized and trapped in a common electromagnetic potential are an advanced few-qubit computation platform. Qubit states are associated with an electronic excitation at each atom, controlled coherently with lasers, and made to interact in two (or many) qubit gates by mutual Coulomb repulsion. One path to quantum advantage with ion-trap quantum processors is to scale small qubit registers by distributing entanglement with photonic interconnects. We consider the feasible efficiency of free-space atom-light couplers for atomic dipole transitions, and derive the atomic image by common free-space couplers. We couple a trapped-ion register with high-aperture lenses and operate a single trapped ion as a photon source. We model the dynamic character of the source and show spin-orbit coupling in the single-photon spatial mode. Although the total collection efficiency is only approximately 0.01, the source has exceptional photon-number purity A = (1.9 +/- 0:2) * 10^-3 such that the higher-order quantum nature of the field persists even after most of the field has been discarded. We derive an efficient quantum non-Gaussian witness and surpass it, the first such demonstration for a trapped-atom single-photon source. We entangle two trapped atoms by single-photon detection, and observe an interference pattern in the spatial mode of the bipartite state. Constructive interference between the entangled components enhances the emission probability by up to 29%, an example of collective enhancement by a two-atom ensemble. The efficiency of free-space atom-light couplers is limited by our capability to engineer high-precision, high-aperture optics. We fabricate ultra-precise hemispheric mirrors with numerical aperture 0.996 by single point diamond turning. The mirrors are amongst the smoothest hemispheric surfaces ever manufactured with root-mean-square (RMS) errors consistently below 25 nm. The smoothest of our mirrors has a RMS error of 14 nm and peak-to-valley error of 88 nm. A mirror with this surface is capable of suppressing or enhancing the spontaneous emission of an atom into free space by 96% in a proposed quantum electrodynamics experiment. We show how these mirrors, with a simple modification, can shape the spatial mode of a trapped atom by similar vacuum-mode engineering. We derive a near-hemispheric mirror coupling scheme that should be 72% efficient with mirrors as precise as ours. We design an ion trap for use with such high-aperture optics. With careful conditioning and control, ensembles of many atoms can be made to store and release photonic qubits on demand. Such optical quantum memories leverage the collective interaction of a light field with many billions of atoms to achieve storage and recall efficiencies approaching unity. We show how stationary light fields for photonic phase gates can be generated in optically deep ensembles, an effect which has since been observed. We implement the gradient echo memory (GEM) scheme in an ultra-high optical depth cold-atom ensemble. The performance of a practical quantum memory is contingent on the chosen qubit encoding. We extend the GEM protocol to allow the simultaneous storage of frequency separated signals and demonstrate that this `dual-rail' memory is suitable for high-fidelity frequency qubits. Dual-rail signals are recalled with 35% efficiency, 82% interference fringe visibility and 6 degrees of phase stability. We describe how the fidelity of the scheme is limited by frequency-dependent polarization rotation and how this may be addressed in an improved configuration. Finally, we demonstrate single-rail storage by GEM with 87% efficiency and 1 ms memory lifetime. Our memory surpasses the no-cloning limit for up to 600 us of storage, out-performing an optical fibre delay line by a factor of six. This is the first quantum memory to beat this important benchmark.

•Jan 1, 2018•1 citation

Controlling quantum systems at the pulse level: cavity QED and beyond

Jan Ole Ernst

This thesis addresses challenges in the experimental realisation of optical quantum computing with atom-cavity platforms and develops techniques for experimental quantum control that generalise across a range of quantum modalities. Within the framework of cavity quantum electrodynamics (cQED), methods are developed and numerically validated for fast and precise control of single atoms to generate photonic states of interest. In particular, we consider the generation of high-repetition-rate n-photon bursts and time-bin entangled states. These photonic resources are essential for applications such as boson sampling, multi-photon interference, optical quantum computing, and quantum-enhanced metrology. Experimental improvements in coherent population transfer are demonstrated using adaptive pulse shaping with acousto-optic modulators. Beyond photon generation, the thesis introduces general-purpose pulse-level techniques, including pulse distortion correction, memory-efficient pulse compression, and machine learning-based optimisation. These methods are shown to be transferable to other platforms, such as neutral atom arrays and superconducting qubits. A particular contribution is the implementation of scalable pulse generation using fixed-point compressed pulse representations on FPGA hardware, achieving substantial memory savings while maintaining high fidelity in simulations of quantum operations. Additionally, reinforcement learning is presented as a powerful tool for optimising complex quantum dynamics, with state-of-the-art results demonstrated across various simulated systems. Throughout the thesis, theoretical developments are supported by numerical simulations and partial experimental validation, providing important insights for the development of future quantum technologies.

•Jan 1, 2025•0 citations

Self-assembled quantum dots in a fully tunable microcavity

Lukas Greuter

The interaction of light with matter is at the heart of quantum optics, which itself enables insight into the fundamental aspects of quantum mechanics. First experimental access to this research field has been realized by coupling atoms to light. Here, the transition between discrete energy states of the atom is associated with the absorption and emission of a photon, a single quantum of the electromagnetic field. As a central aspect of quantum optics, the light-emitter interaction can be significantly enhanced by placing the emitter in optical cavity that is on resonance with the emitter. In recent years, this has led to a rapidly evolving research field known as cavity quantum electrodynamics (CQED). In CQED two different regimes are distinguished: the strong and the weak coupling regimes. In the strong coupling regime, the emitted photon is reflected from the cavity mirrors and eventually reabsorbed by the emitter. In contrast, the weak coupling regime describes the irreversible emission, where the photon leaks out of the cavity before it can be reabsorbed. Both the weak and strong coupling regimes enabled fundamental experiments for a better understanding of quantum optical phenomena. \n \n \n \nCQED grants access to the quantum world and hence offers potentially revolutionizing applications, particularly in the field of quantum information processing. A central aspect for the successful implementation of quantum applications is the system's scalability. Unfortunately, placing atoms deterministically inside a cavity remains technologically elaborate and hence minimizes the prospect of scaling a atom-CQED system. \n \nA possibility to address this issue is to implement CQED in the solid state, where sophisticated fabrication strategies allow miniaturization and scalability of the system. Particularly the development of self-assembled quantum dots (QD) in semiconductors represent a promising route. QDs can be considered as artificial atoms that mimic the atomic two-level system. These structures interact strongly with light and therefore have the potential for replacing atoms in CQED. As a central advantage, QDs are naturally trapped, which greatly simplifies the deterministic incorporation into the cavity. \n \nIn recent years, many efforts have been made to couple self-assembled QDs to microcavities. Generally, the successful implementation of CQED requires a cavity with a high quality factor Q and a low mode volume. In a majority of the approaches, the high Q/small mode volume cavities were monolithically defined around the QD, embedding the QD at a fixed position inside the cavity. Both the weak and strong coupling regimes have been reached with these systems. However, for future applications they suffer from several disadvantages. The fixed position of the QD inside the cavity minimizes the prospects for spectral tunability and spatial positioning the QD inside the cavity. Furthermore, prospects for further increasing of the cavity Q-factor and minimization of the mode volume remain limited in these systems. \n \nIn this thesis the mentioned disadvantages are addressed by developing a fully tunable miniaturized Fabry-Pérot microcavity with low mode volume. The design enables both spatial positioning of the emitter inside the cavity and spectral tunability. Successful coupling of a single QD to the microcavity is demonstrated including the strong coupling regime. Further a new approach to decrease the cavity mode volume is presented, where we demonstrate weak coupling is achieved

•Jan 1, 2015•0 citations

A Cavity-Coupled Rydberg Atom Array for Quantum Science and Quantum Computing

Beili Hu

Neutral atom arrays have rapidly emerged as a leading platform for quantum computing, boasting scalable, configurable arrays of single atoms trapped in optical tweezers, fast, high-fidelity entangling gates through Rydberg interactions, and programmable, parallelized control of qubit operations. Coupling an atom array to an optical cavity opens a new frontier. Leveraging enhanced light-atom interactions in cavity quantum electrodynamics, cavity- coupled atom arrays acquire capabilities that can further expand the neutral atom toolbox, including cavity-enhanced atom readouts, atom-photon entanglement, and photon-mediated interactions between distant atoms. This thesis presents a quantum hardware platform that integrates an array of neutral atoms with a high-finesse optical cavity. After describing the design and development of the experimental apparatus, I demonstrate high-fidelity atom state readout through the cavity, achieving improved speed and atom survival compared to conventional free-space imaging methods. I then introduce a new technique for selectively controlling atom-cavity coupling on arbitrary subsets of the array, using local AC Stark shifts on the excited states of the atoms. Building on these tools, I demonstrate fast, non-destructive cavity-based readout of atom arrays, a crucial bottleneck of atom array platforms. I also showcase real-time measurement and feedback capabilities with a demonstration of classical error correction, using a register of atomic bits. Finally, I describe progress toward implementing single- and two-qubit gates within the cavity-coupled system. By combining coherent control, tunable interactions, and high-fidelity, non-destructive readout integrated and real-time feedback, the cavity-coupled Rydberg atom array offers a promising path toward fault-tolerant quantum computing.

•May 1, 2025•0 citations
Cavity quantum electrodynamics explores the dynamics and manipulation of quantized electromagnetic fields and atomic systems coherently coupled inside an electromagnetic resonator or cavity. High-quality, small-volume cavities have been exploited as the critical component in numerous promising schemes for developing quantum technology in this era of quantum revolution.\n \n Within this context, this thesis investigates various prospective quantum technology based on atom-cavity systems, from new optical-cavity designs, through to cavity-enhanced single-photon sources in diamond for secure communication, quantum controls for photon pulse-shaping, qubit preparation and implementing faster quantum gates, and finally novel metamaterials built of cavity-arrays.\n \n The discussion begins with a proposal of novel slot-waveguide cavity designs for visible wavelength operations. Optimization to minimize cavity mode volumes in these structures is conducted, showing that they are capable of generating stronger atom-photon couplings than state-of-the-art cubic-wavelength cavities. The use of the diamond colour centres are then reviewed with original work carried out to show that spectral bandwidth/purity, emission rate, quantum efficiency and reliability can be improved by the use of cavities. These results improve the prospects of the centres for practical applications in long-distance, high-speed quantum communication.\n \n Next, a dynamic control for modifying effective cavity properties in a coupled-cavity arrangement is introduced. The scheme can be applied to perform reversible switching of single photons into and out of cavities, and temporal shaping and time-encoding of single photons. The reversible photon-switching control is applied to implement a two-qubit quantum gate, which by breaking the time-bandwidth limitation, outperforms comparable passive devices.\n \n Finally, we present a novel metamaterial design based on cavity-arrays and coupled atom-cavity systems, which can be used to engineer anomalous light response and complex waveguiding properties. In particular, as an introductory application, demonstrations of superlensing effects, which are pertinent for subwavelength imaging, are presented.
Dynamic coupling of cavities to a quantum network is of major interest to distributed quantum information processing schemes based on cavity quantum electrodynamics. This can be achieved by actively tuning a mediating atom-cavity system. In particular, we consider the dynamic coupling between two coupled cavities, each interacting with a two-level atom, realized by tuning one of the atoms. One atom-field system can be controlled to become maximally and minimally coupled with its counterpart, allowing high fidelity excitation confinement, QQQ switching, and reversible state transport. As an application, we first show that simple tuning can lead to emission of near-Gaussian single-photon pulses that is significantly different from the usual exponential decay in a passive cavity-based system. The influences of cavity loss and atomic spontaneous emission are studied in detailed numerical simulations, showing the practicality of these schemes within the reach of current experimental solid-state technology. We then show that when the technique is employed to an extended coupled-cavity scheme involving a multilevel atom, arbitrary temporal superposition of single photons can be engineered in a deterministic way.
A single two-level emitter coupled to a single mode of an electromagnetic resonator constitutes the most fundamental instance of light--matter interaction. Realizations of this type of system are investigated in the field of cavity quantum electrodynamics (cavity QED). Particularly important are schemes in which the coupling is strong enough to exceed the spontaneous emission rate as well as cavity damping. In this case, the coherent exchange of excitation between source and photon is the dominating process, providing the unique possibility to deterministically control the quantum evolution of the system. Great progress has recently been accomplished, technologically as well as conceptually, and the focus section in this issue of Journal of Optics B: Quantum and Semiclassical Optics features five articles highlighting important recent developments in the field. Strong coupling between single atoms and the electromagnetic cavity field have been achieved in two distinct regimes, the optical and the microwave region. The latter is represented by the micromaser, a high-Q microwave cavity pumped by a beam of highly excited Rydberg atoms. It has proved to be an almost ideal system for the generation of non-classical field states. A constraint in these experiments is the fact that the field inside the cavity can only be examined indirectly, by analysing the occupation of atoms leaving the cavity. While only two atomic states were previously identified for this purpose, V A Reshetov shows in his article (pages 119--126) that more information on the field may be extracted by taking advantage of the Zeeman substructure of the atomic levels. In the optical domain of cavity QED, by contrast, the state of the resonator field may be probed directly by measuring the light leaking from the cavity using photodetectors. In order to minimize damping, high-quality cavities must be employed. In most optical experiments these are Fabry--Perot resonators with ultra-high reflectivity mirrors, with losses as low as a few parts per million being state of the art. At the same time, the coupling of atoms and photons is enhanced by reducing the length of the cavity, so that strong coupling conditions are reached. A very attractive application of this type of cavity QED setup is the possibility of exerting control over the quantum dynamics of the system. An impressive example is the implementation of quantum feedback, reported in the paper by W P Smith and L A Orozco (pages 127--134). Using information gained from detecting a single photon escaping from the cavity, active feedback is applied to halt the dynamical evolution of the system. This is the first time active feedback has been used to modify the quantum evolution of a system at the single-photon level. The authors discuss how detunings between the subsystems affect the quantum feedback, an issue particularly relevant for ensembles of atoms with a spread in detuning. Perfect quantum feedback in this case requires the use of additional parameters to control the system. The majority of optical cavity QED experiments performed so far have used as a medium atoms traversing the cavity on random trajectories, such as, for example, thermal atomic beams. In this case, the observation of quantum effects is degraded in two ways. The Doppler effect and the finite transit time lead to line broadening, while the spatial structure of the cavity mode results in atoms in different locations experiencing different coupling with the photonic field. J E Reiner et al (pages 135--142) investigate the impact of these effects on quantum fluctuations in their cavity QED system. In order to overcome line broadening, they have developed a continuous cold atomic beam, extracted from a magneto-optical trap. An even better control of broadening effects and fluctuating coupling strength is provided by trapping the atoms inside the cavity and cooling them to temperatures at which their position spread is smaller than the optical wavelength. Much recent activity has been devoted to developing such an ultimate cavity QED system. A Vukics et al (pages 143--153) present a theoretical proposal for dynamically trapping and cooling atoms inside a cavity. By driving the atoms with a standing wave injected from the side of the cavity and by weakly exciting the cavity field itself, they predict three-dimensional trapping of the atom for periods around 1 second, an extremely long time on the typical scale of cavity QED dynamics. The essential component of their scheme is the interference between the two driving fields, determining the temperature of the particle and the stable trapping positions. In the quest for better confinement of radiation, lately, an appealing alternative to the Fabry--Perot cavity has been investigated -- the optical microsphere resonator. A sphere with a diameter of a few tens of microns, it supports so-called whispering gallery modes near its circumference, for which quality factors up to 10 10 have been measured. In order to exploit the correspondingly low field damping rates for cavity QED, a method must be found to couple atomic or solid state emitters to these modes. S Göotzinger et al (pages 154--158) report the coupling of single nanocrystals on the surface of a microsphere through the evanescent field of the mode. Selective excitation of a single nano-emitter was accomplished with a scanning confocal microscope. The system is a promising candidate for cavity QED with single-quantum emitters. The ability to fully control the quantum dynamics of atoms and light is beginning to spawn early applications. The most notable example is quantum information processing. This requires the coherent manipulation of single-quantum systems, which is ideally provided by cavity QED interaction in the strong-coupling limit. The development of practical devices will be among the principal future tasks for research in the field. This will include physical systems, which have not been covered in this issue, such as semiconductors, quantum dots as emitters, or photonic crystals as resonator structures. Cavity QED is therefore guaranteed to remain a vigorous field in the years to come.
Devices that harness the surprising properties of quantum systems at scale hold the possibility of revolutionary advances in information technology. Algorithms for quantum computers can take advantage of quantum parallelism to solve problems that are intractable with classical hardware, including prime factorization and simulating chemical processes. A quantum communication network that carries qubits instead of bits can leverage the irreversibility of projective measurement to guarantee secure communication. Because quantum states are fragile, building such devices requires exquisite control over many isolated quantum systems. One of the most critical capabilities is the interaction of stationary and flying qubits. In this thesis we consider how to engineer atom-light interactions as an interface for networked quantum systems. Quantum atom-light couplers require the efficient and reversible interaction of atomic and optical qubits, but the natural interaction of atoms and photons is weak. It is this very lack of interaction between light and its environment that makes light such an excellent carrier of quantum information. There are three promising strategies for stronger coherent atom-light interactions. First, the light field may be confined to a cavity so that it interacts with the atom over a longer time. Second, the light field may be focussed to a small spot with high aperture optics and matched to the natural atomic radiation pattern. Third, we may pass the light field through an ensemble of many atoms and store the qubit in a distributed state. In practice, atom-light couplers employ some combination of all three strategies. We will focus our research on the second two approaches: first by coupling one and two trapped ions with high aperture optics, and then operating a quantum optical memory with an ensemble of approximately 10 billion neutral atoms. Atoms that have been ionized and trapped in a common electromagnetic potential are an advanced few-qubit computation platform. Qubit states are associated with an electronic excitation at each atom, controlled coherently with lasers, and made to interact in two (or many) qubit gates by mutual Coulomb repulsion. One path to quantum advantage with ion-trap quantum processors is to scale small qubit registers by distributing entanglement with photonic interconnects. We consider the feasible efficiency of free-space atom-light couplers for atomic dipole transitions, and derive the atomic image by common free-space couplers. We couple a trapped-ion register with high-aperture lenses and operate a single trapped ion as a photon source. We model the dynamic character of the source and show spin-orbit coupling in the single-photon spatial mode. Although the total collection efficiency is only approximately 0.01, the source has exceptional photon-number purity A = (1.9 +/- 0:2) * 10^-3 such that the higher-order quantum nature of the field persists even after most of the field has been discarded. We derive an efficient quantum non-Gaussian witness and surpass it, the first such demonstration for a trapped-atom single-photon source. We entangle two trapped atoms by single-photon detection, and observe an interference pattern in the spatial mode of the bipartite state. Constructive interference between the entangled components enhances the emission probability by up to 29%, an example of collective enhancement by a two-atom ensemble. The efficiency of free-space atom-light couplers is limited by our capability to engineer high-precision, high-aperture optics. We fabricate ultra-precise hemispheric mirrors with numerical aperture 0.996 by single point diamond turning. The mirrors are amongst the smoothest hemispheric surfaces ever manufactured with root-mean-square (RMS) errors consistently below 25 nm. The smoothest of our mirrors has a RMS error of 14 nm and peak-to-valley error of 88 nm. A mirror with this surface is capable of suppressing or enhancing the spontaneous emission of an atom into free space by 96% in a proposed quantum electrodynamics experiment. We show how these mirrors, with a simple modification, can shape the spatial mode of a trapped atom by similar vacuum-mode engineering. We derive a near-hemispheric mirror coupling scheme that should be 72% efficient with mirrors as precise as ours. We design an ion trap for use with such high-aperture optics. With careful conditioning and control, ensembles of many atoms can be made to store and release photonic qubits on demand. Such optical quantum memories leverage the collective interaction of a light field with many billions of atoms to achieve storage and recall efficiencies approaching unity. We show how stationary light fields for photonic phase gates can be generated in optically deep ensembles, an effect which has since been observed. We implement the gradient echo memory (GEM) scheme in an ultra-high optical depth cold-atom ensemble. The performance of a practical quantum memory is contingent on the chosen qubit encoding. We extend the GEM protocol to allow the simultaneous storage of frequency separated signals and demonstrate that this `dual-rail' memory is suitable for high-fidelity frequency qubits. Dual-rail signals are recalled with 35% efficiency, 82% interference fringe visibility and 6 degrees of phase stability. We describe how the fidelity of the scheme is limited by frequency-dependent polarization rotation and how this may be addressed in an improved configuration. Finally, we demonstrate single-rail storage by GEM with 87% efficiency and 1 ms memory lifetime. Our memory surpasses the no-cloning limit for up to 600 us of storage, out-performing an optical fibre delay line by a factor of six. This is the first quantum memory to beat this important benchmark.
This thesis addresses challenges in the experimental realisation of optical quantum computing with atom-cavity platforms and develops techniques for experimental quantum control that generalise across a range of quantum modalities. Within the framework of cavity quantum electrodynamics (cQED), methods are developed and numerically validated for fast and precise control of single atoms to generate photonic states of interest. In particular, we consider the generation of high-repetition-rate n-photon bursts and time-bin entangled states. These photonic resources are essential for applications such as boson sampling, multi-photon interference, optical quantum computing, and quantum-enhanced metrology. Experimental improvements in coherent population transfer are demonstrated using adaptive pulse shaping with acousto-optic modulators. Beyond photon generation, the thesis introduces general-purpose pulse-level techniques, including pulse distortion correction, memory-efficient pulse compression, and machine learning-based optimisation. These methods are shown to be transferable to other platforms, such as neutral atom arrays and superconducting qubits. A particular contribution is the implementation of scalable pulse generation using fixed-point compressed pulse representations on FPGA hardware, achieving substantial memory savings while maintaining high fidelity in simulations of quantum operations. Additionally, reinforcement learning is presented as a powerful tool for optimising complex quantum dynamics, with state-of-the-art results demonstrated across various simulated systems. Throughout the thesis, theoretical developments are supported by numerical simulations and partial experimental validation, providing important insights for the development of future quantum technologies.
The interaction of light with matter is at the heart of quantum optics, which itself enables insight into the fundamental aspects of quantum mechanics. First experimental access to this research field has been realized by coupling atoms to light. Here, the transition between discrete energy states of the atom is associated with the absorption and emission of a photon, a single quantum of the electromagnetic field. As a central aspect of quantum optics, the light-emitter interaction can be significantly enhanced by placing the emitter in optical cavity that is on resonance with the emitter. In recent years, this has led to a rapidly evolving research field known as cavity quantum electrodynamics (CQED). In CQED two different regimes are distinguished: the strong and the weak coupling regimes. In the strong coupling regime, the emitted photon is reflected from the cavity mirrors and eventually reabsorbed by the emitter. In contrast, the weak coupling regime describes the irreversible emission, where the photon leaks out of the cavity before it can be reabsorbed. Both the weak and strong coupling regimes enabled fundamental experiments for a better understanding of quantum optical phenomena. \n \n \n \nCQED grants access to the quantum world and hence offers potentially revolutionizing applications, particularly in the field of quantum information processing. A central aspect for the successful implementation of quantum applications is the system's scalability. Unfortunately, placing atoms deterministically inside a cavity remains technologically elaborate and hence minimizes the prospect of scaling a atom-CQED system. \n \nA possibility to address this issue is to implement CQED in the solid state, where sophisticated fabrication strategies allow miniaturization and scalability of the system. Particularly the development of self-assembled quantum dots (QD) in semiconductors represent a promising route. QDs can be considered as artificial atoms that mimic the atomic two-level system. These structures interact strongly with light and therefore have the potential for replacing atoms in CQED. As a central advantage, QDs are naturally trapped, which greatly simplifies the deterministic incorporation into the cavity. \n \nIn recent years, many efforts have been made to couple self-assembled QDs to microcavities. Generally, the successful implementation of CQED requires a cavity with a high quality factor Q and a low mode volume. In a majority of the approaches, the high Q/small mode volume cavities were monolithically defined around the QD, embedding the QD at a fixed position inside the cavity. Both the weak and strong coupling regimes have been reached with these systems. However, for future applications they suffer from several disadvantages. The fixed position of the QD inside the cavity minimizes the prospects for spectral tunability and spatial positioning the QD inside the cavity. Furthermore, prospects for further increasing of the cavity Q-factor and minimization of the mode volume remain limited in these systems. \n \nIn this thesis the mentioned disadvantages are addressed by developing a fully tunable miniaturized Fabry-Pérot microcavity with low mode volume. The design enables both spatial positioning of the emitter inside the cavity and spectral tunability. Successful coupling of a single QD to the microcavity is demonstrated including the strong coupling regime. Further a new approach to decrease the cavity mode volume is presented, where we demonstrate weak coupling is achieved
Neutral atom arrays have rapidly emerged as a leading platform for quantum computing, boasting scalable, configurable arrays of single atoms trapped in optical tweezers, fast, high-fidelity entangling gates through Rydberg interactions, and programmable, parallelized control of qubit operations. Coupling an atom array to an optical cavity opens a new frontier. Leveraging enhanced light-atom interactions in cavity quantum electrodynamics, cavity- coupled atom arrays acquire capabilities that can further expand the neutral atom toolbox, including cavity-enhanced atom readouts, atom-photon entanglement, and photon-mediated interactions between distant atoms. This thesis presents a quantum hardware platform that integrates an array of neutral atoms with a high-finesse optical cavity. After describing the design and development of the experimental apparatus, I demonstrate high-fidelity atom state readout through the cavity, achieving improved speed and atom survival compared to conventional free-space imaging methods. I then introduce a new technique for selectively controlling atom-cavity coupling on arbitrary subsets of the array, using local AC Stark shifts on the excited states of the atoms. Building on these tools, I demonstrate fast, non-destructive cavity-based readout of atom arrays, a crucial bottleneck of atom array platforms. I also showcase real-time measurement and feedback capabilities with a demonstration of classical error correction, using a register of atomic bits. Finally, I describe progress toward implementing single- and two-qubit gates within the cavity-coupled system. By combining coherent control, tunable interactions, and high-fidelity, non-destructive readout integrated and real-time feedback, the cavity-coupled Rydberg atom array offers a promising path toward fault-tolerant quantum computing.