Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Cambridge University Press eBooks

Nonlinear dynamics in Fabry–Perot cavities

Luigi Lugiato, Franco Prati, Massimo Brambilla

Published Feb 28, 2015• 0 citations
Publisher

Abstract

In Chapters 8–13 we always assumed that the nonlinear medium is contained in a unidirectional ring cavity. The case of a Fabry–Perot cavity (Fig. 8.1) is substantially more complex because the interference of the two counterpropagating fields gives rise to a standing-wave pattern that modulates the population difference and the atomic polarization to form gratings with a spatial frequency equal to the inverse of the half-wavelength and its harmonics. Therefore the atomic variables exhibit, in addition to the slow spatial variation which characterizes the envelopes, also a fast spatial variation on the wavelength scale, and the coexistence of these two spatial scales poses a highly nontrivial problem that must be treated with care.

DOI
10.1017/cbo9781107477254.016

Related papers

Traveling wave formalism for the dynamics of optical systems in nonlinear Fabry–Perot cavities

Luigi A. Lugiato, Franco Prati

Abstract We formulate the dynamics of nonlinear optical Fabry–Perot (FB) cavities in terms of a model in which only one of the two counter-propagating electric field envelopes appear. Thus, the model is simpler than the standard ones but still exact. The field envelope which propagates in the opposite direction is expressed in a very simple way in terms of the envelope that appears in the model. Thus we generalize in the simplest way to the FB case the set of Maxwell–Bloch equations for the ring cavity. The boundary condition for the field envelope that appears in the model is a simple periodicity condition. This feature allows for expanding the variables of the model in terms of traveling waves instead of standing waves as it is customary, which implies noteworthy simplifications in the calculations. On the basis of the modal equations which arise from the model, we discuss the adiabatic elimination of the atomic variables and of the atomic polarization only.

Physica Scripta•Sep 4, 2018•10 citations

Optical resonators. The planar ring cavity. Empty cavity. Linear cavity

Luigi Lugiato, Franco Prati, Massimo Brambilla

With the exception of Chapter 1, up to this point we have considered cavityless optical systems. With this chapter, instead, we start focussing on the case that the atomic medium is located in an optical cavity. We describe in detail the case of a unidirectional ring resonator, the boundary condition which characterizes it and the relations between its output fields and the intracavity field (Sections 8.1–8.3). We discuss the transmission of an empty cavity (Section 8.4) and of a cavity that contains a linear medium (Section 8.5). Optical cavities An optical cavity or optical resonator is formed by at least two mirrors, appropriately arranged in such a way that the radiation beam follows a closed path. The beam splitters allow the radiation to escape from the cavity (output) and allow one to inject radiation into the cavity (input). In order to confine the radiation transversally with respect to the direction of propagation, the mirrors are usually spherical (see Fig. 1.2). The case of cavities with spherical mirrors will be described in Part III of this volume. On the other hand, an analytical treatment of the problems is possible only within the plane-wave approximation which we will use in the remainder of Part I and in Part II. In accord with this, we assume here that the mirrors are planar. The two most common types of optical resonator are the Fabry–Perot cavity and the ring cavity . The planar Fabry–Perot cavity consists in two beam splitters in a parallel configuration as shown in Fig. 8.1. Within the cavity there are two counterpropagating fields, E F propagating in the forward direction and E B propagating in the backward direction with respect to the input field E I . Because we have derived the Maxwell–Bloch equations for the unidirectional configuration, in this and the following chapters we focus on the case of a ring cavity, which allows unidirectionality. The Fabry–Perot case will be considered in Chapter 14.

Cambridge University Press eBooks•Feb 28, 2015•0 citations

Scaling laws and response-time effects in nonlinear Fabry-Perot resonators

W. J. Firth, A. G. Fitzgerald

We examine nonlinear Fabry-Perot resonators where the medium response time τ is, respectively, much less than, comparable to, and much greater than the cavity round-trip time tR. As in previous work1 we assume the cavity is filled with a Kerrlike medium in which diffusion washes out all phase gratings.

Journal of the Optical Society of America B•Jan 1, 1986•0 citations

Single- and two-mode models

Luigi A. Lugiato, Franco Prati, Massimo Brambilla

In the first section we discuss the stationary solutions for a laser with an injected signal, the active counterpart of the optical bistability analyzed in Chapter 11. Next, in Section 13.2 we consider another very interesting system, namely a laser with a saturable absorber, a free-running laser in which the optical cavity contains a passive medium in addition to the active medium. The single-mode model for this system can be constructed by combining the single-mode models for the free-running laser and for optical bistability. The discussion is then focussed on its stationary states. In Section 13.3 we return to the single-mode model for optical bistability and, by introducing an appropriate “cubic limit” on the parameters in play, we derive a cubic model for dispersive optical bistability with two-level atoms. The stationary equation for such a model formally coincides with that derived and discussed for a Kerr medium in Section 11.2. In the last section we start from the equations for a quadratic nonlinear medium in the degenerate configuration derived in Chapter 6 and combine them with the appropriate boundary conditions for the two field envelopes in play, assuming that the quadratic medium is contained in a ring cavity as happens in an optical parametric oscillator or in second-harmonic generation in a cavity. Next, by introducing the low-transmission limit and the single-mode limit we derive a two-mode model that describes the dynamics of a degenerate optical parametric oscillator or of second-harmonic generation in a cavity. Finally, for the case of a parametric oscillator we illustrate extensively the stationary solutions of the equations. A laser with an injected signal From a technical point of view, this system is interesting because of the possibility of stabilizing the frequency and the phase of separate lasers by taking advantage of the known affinity of nonlinear oscillators to lock onto a periodic forcing element. In 1972 Spencer and Lamb [125] predicted the possibility of bistable behavior in a laser with an injected signal before the surge of interest in optical bistability in the passive configuration.

Cambridge University Press eBooks•Feb 28, 2015•0 citations

The behavior of a system with one atom confined in a Fabry-Perot optical cavity with a nonlinear mirror

Babak Parvin, Rasoul Malekfar

The European Physical Journal D•May 1, 2012•6 citations

Nonlinear dynamics in a Fabry-Perot resonator (A)

Luigi Lugiato, Ellen Dougherty, Lorenzo M. Narducci +1 more

Journal of the Optical Society of America B•Feb 1, 1987•0 citations
In Chapters 8–13 we always assumed that the nonlinear medium is contained in a unidirectional ring cavity. The case of a Fabry–Perot cavity (Fig. 8.1) is substantially more complex because the interference of the two counterpropagating fields gives rise to a standing-wave pattern that modulates the population difference and the atomic polarization to form gratings with a spatial frequency equal to the inverse of the half-wavelength and its harmonics. Therefore the atomic variables exhibit, in addition to the slow spatial variation which characterizes the envelopes, also a fast spatial variation on the wavelength scale, and the coexistence of these two spatial scales poses a highly nontrivial problem that must be treated with care.
Abstract We formulate the dynamics of nonlinear optical Fabry–Perot (FB) cavities in terms of a model in which only one of the two counter-propagating electric field envelopes appear. Thus, the model is simpler than the standard ones but still exact. The field envelope which propagates in the opposite direction is expressed in a very simple way in terms of the envelope that appears in the model. Thus we generalize in the simplest way to the FB case the set of Maxwell–Bloch equations for the ring cavity. The boundary condition for the field envelope that appears in the model is a simple periodicity condition. This feature allows for expanding the variables of the model in terms of traveling waves instead of standing waves as it is customary, which implies noteworthy simplifications in the calculations. On the basis of the modal equations which arise from the model, we discuss the adiabatic elimination of the atomic variables and of the atomic polarization only.
With the exception of Chapter 1, up to this point we have considered cavityless optical systems. With this chapter, instead, we start focussing on the case that the atomic medium is located in an optical cavity. We describe in detail the case of a unidirectional ring resonator, the boundary condition which characterizes it and the relations between its output fields and the intracavity field (Sections 8.1–8.3). We discuss the transmission of an empty cavity (Section 8.4) and of a cavity that contains a linear medium (Section 8.5). Optical cavities An optical cavity or optical resonator is formed by at least two mirrors, appropriately arranged in such a way that the radiation beam follows a closed path. The beam splitters allow the radiation to escape from the cavity (output) and allow one to inject radiation into the cavity (input). In order to confine the radiation transversally with respect to the direction of propagation, the mirrors are usually spherical (see Fig. 1.2). The case of cavities with spherical mirrors will be described in Part III of this volume. On the other hand, an analytical treatment of the problems is possible only within the plane-wave approximation which we will use in the remainder of Part I and in Part II. In accord with this, we assume here that the mirrors are planar. The two most common types of optical resonator are the Fabry–Perot cavity and the ring cavity . The planar Fabry–Perot cavity consists in two beam splitters in a parallel configuration as shown in Fig. 8.1. Within the cavity there are two counterpropagating fields, E F propagating in the forward direction and E B propagating in the backward direction with respect to the input field E I . Because we have derived the Maxwell–Bloch equations for the unidirectional configuration, in this and the following chapters we focus on the case of a ring cavity, which allows unidirectionality. The Fabry–Perot case will be considered in Chapter 14.
In the first section we discuss the stationary solutions for a laser with an injected signal, the active counterpart of the optical bistability analyzed in Chapter 11. Next, in Section 13.2 we consider another very interesting system, namely a laser with a saturable absorber, a free-running laser in which the optical cavity contains a passive medium in addition to the active medium. The single-mode model for this system can be constructed by combining the single-mode models for the free-running laser and for optical bistability. The discussion is then focussed on its stationary states. In Section 13.3 we return to the single-mode model for optical bistability and, by introducing an appropriate “cubic limit” on the parameters in play, we derive a cubic model for dispersive optical bistability with two-level atoms. The stationary equation for such a model formally coincides with that derived and discussed for a Kerr medium in Section 11.2. In the last section we start from the equations for a quadratic nonlinear medium in the degenerate configuration derived in Chapter 6 and combine them with the appropriate boundary conditions for the two field envelopes in play, assuming that the quadratic medium is contained in a ring cavity as happens in an optical parametric oscillator or in second-harmonic generation in a cavity. Next, by introducing the low-transmission limit and the single-mode limit we derive a two-mode model that describes the dynamics of a degenerate optical parametric oscillator or of second-harmonic generation in a cavity. Finally, for the case of a parametric oscillator we illustrate extensively the stationary solutions of the equations. A laser with an injected signal From a technical point of view, this system is interesting because of the possibility of stabilizing the frequency and the phase of separate lasers by taking advantage of the known affinity of nonlinear oscillators to lock onto a periodic forcing element. In 1972 Spencer and Lamb [125] predicted the possibility of bistable behavior in a laser with an injected signal before the surge of interest in optical bistability in the passive configuration.