In the first section we discuss the stationary solutions for a laser with an injected signal, the active counterpart of the optical bistability analyzed in Chapter 11. Next, in Section 13.2 we consider another very interesting system, namely a laser with a saturable absorber, a free-running laser in which the optical cavity contains a passive medium in addition to the active medium. The single-mode model for this system can be constructed by combining the single-mode models for the free-running laser and for optical bistability. The discussion is then focussed on its stationary states. In Section 13.3 we return to the single-mode model for optical bistability and, by introducing an appropriate “cubic limit” on the parameters in play, we derive a cubic model for dispersive optical bistability with two-level atoms. The stationary equation for such a model formally coincides with that derived and discussed for a Kerr medium in Section 11.2. In the last section we start from the equations for a quadratic nonlinear medium in the degenerate configuration derived in Chapter 6 and combine them with the appropriate boundary conditions for the two field envelopes in play, assuming that the quadratic medium is contained in a ring cavity as happens in an optical parametric oscillator or in second-harmonic generation in a cavity. Next, by introducing the low-transmission limit and the single-mode limit we derive a two-mode model that describes the dynamics of a degenerate optical parametric oscillator or of second-harmonic generation in a cavity. Finally, for the case of a parametric oscillator we illustrate extensively the stationary solutions of the equations. A laser with an injected signal From a technical point of view, this system is interesting because of the possibility of stabilizing the frequency and the phase of separate lasers by taking advantage of the known affinity of nonlinear oscillators to lock onto a periodic forcing element. In 1972 Spencer and Lamb [125] predicted the possibility of bistable behavior in a laser with an injected signal before the surge of interest in optical bistability in the passive configuration.
In the first section we discuss the stationary solutions for a laser with an injected signal, the active counterpart of the optical bistability analyzed in Chapter 11. Next, in Section 13.2 we consider another very interesting system, namely a laser with a saturable absorber, a free-running laser in which the optical cavity contains a passive medium in addition to the active medium. The single-mode model for this system can be constructed by combining the single-mode models for the free-running laser and for optical bistability. The discussion is then focussed on its stationary states. In Section 13.3 we return to the single-mode model for optical bistability and, by introducing an appropriate “cubic limit” on the parameters in play, we derive a cubic model for dispersive optical bistability with two-level atoms. The stationary equation for such a model formally coincides with that derived and discussed for a Kerr medium in Section 11.2. In the last section we start from the equations for a quadratic nonlinear medium in the degenerate configuration derived in Chapter 6 and combine them with the appropriate boundary conditions for the two field envelopes in play, assuming that the quadratic medium is contained in a ring cavity as happens in an optical parametric oscillator or in second-harmonic generation in a cavity. Next, by introducing the low-transmission limit and the single-mode limit we derive a two-mode model that describes the dynamics of a degenerate optical parametric oscillator or of second-harmonic generation in a cavity. Finally, for the case of a parametric oscillator we illustrate extensively the stationary solutions of the equations. A laser with an injected signal From a technical point of view, this system is interesting because of the possibility of stabilizing the frequency and the phase of separate lasers by taking advantage of the known affinity of nonlinear oscillators to lock onto a periodic forcing element. In 1972 Spencer and Lamb [125] predicted the possibility of bistable behavior in a laser with an injected signal before the surge of interest in optical bistability in the passive configuration.
Modeling lasers may be realized with different levels of sophistication. Rigorously it requires a full quantum treatment but many laser dynamical properties may be captured by semiclassical or even purely classical approaches. In this book we deliberately chose the simplest point of view, i.e. purely classical equations, and try to extract analytically as much information as possible. The basic framework of our approach is provided by the rate equations . In their simplest version, they apply to an idealized active system consisting of only two energy levels coupled to a reservoir. They were introduced as soon as the laser was discovered to explain (regular or irregular, damped or undamped) intensity spikes commonly seen with solid state lasers (for a historical review, see the introduction in). These rate equations are discussed and sometimes derived from a semiclassical theory in textbooks on lasers. They capture the essential features of the response of a single-mode laser and they may be modified to account for specific effects such as the modulation of a parameter or optical feedback. The most basic processes involved in laser operation are schematically represented in Figure 1.1. N 1 and N 2 denote the number of atoms in the ground and excited levels, respectively. The process of light–matter interaction is restricted to stimulated emission and absorption.
In Chapter 9 we discussed the case of a nonlinear cavity containing an active medium. In this framework, the outstanding phenomenon which arises is laser emission, and we calculated the stationary solutions for the ring laser. In this chapter, instead, we turn our attention to the passive nonlinear cavity and in this framework the outstanding phenomenon is optical bistability , i.e. the existence of two distinct stable stationary states that coexist for the same fixed values of the parameters in play. This phenomenon can arise also in the case of an active system contained in a cavity, as we have already noted in Section 9.1 and as we will discuss further in connection with the laser with injected signal, but it became popular from the studies of nonlinear passive optical cavities in the 1970s and 1980s. In contrast to the laser case, in the passive configuration we use an input coherent field, which is injected into the cavity. We discussed this case in Chapter 8 and derived a general equation for the transmission of the cavity (Eq. (8.23)), which we used for an empty cavity and for a linear cavity in Sections 8.4 and 8.5, respectively. In this chapter we will discuss the full nonlinear configuration. It is customary to identify two extreme cases of optical bistability called absorptive optical bistability and dispersive or refractive optical bistability . In both cases an essential ingredient to obtain the bistable behavior is the feedback action exerted by the mirrors of the cavity. In the purely absorptive configuration, in which there is exact resonance among the frequencies of the input field, of the atoms and of the cavity, the other essential ingredient is the saturable nonlinearity of the absorption. In the dispersive case, instead, the main feature is the nonlinearity of the refractive index. These two cases will be illustrated in Sections 11.1 and 11.2, respectively, both “exactly” and in the low-transmission limit.
In this paper we analyze the steady-state and stability properties of bistable optical systems, lasers with an injected signal, and ordinary free-running lasers. The starting point of our study is a unified model of a ring cavity containing a finite-size cylindrical sample of homogeneously broadened two-level atoms, and capable of supporting a single field mode with a Gaussian transverse profile. After solving the equations of motion in the steady state, we carry out a linear stability analysis of the stationary solutions, identify the domains of unstable operation of each of the three systems, and compare in detail the results of this work with those of earlier plane-wave uniform-field calculations. In the case of the laser with an injected signal, we find a significant enhancement of the instability domain relative to the plane-wave limit. A similar conclusion holds for mixed absorptive and dispersive optical bistability, although the enhancement of the domain of instability is less pronounced. Unstable behavior is predicted to occur for experimentally accessible values of the bistability parameter, and to be favored by the absence of bistability and by the selection of atomic and cavity detunings having opposite signs. This configuration ensures that the instability will be responsible for the emergence of undamped output pulsations of the type that will make the bistable system behave as an optical clock.
The relaxation rates κ , γ ⊥ and γ ∥ which appear in the single-mode model are irrelevant for the stationary state. Instead, their values become critical when we consider dynamical, i.e. time-dependent, phenomena. In particular, they control the possibility of eliminating adiabatically some of the variables in play, thus reducing the complexity of the problem. In this chapter we first illustrate, in Section 19.1, the useful laser classification introduced by Arecchi. Next, in Section 19.2, we discuss the dynamical behavior of the solutions of a model obtained from the single-mode model (derived in Chapter 12) by performing the adiabatic elimination of the atomic variables, which procedure is called the good-cavity limit in the literature. Section 19.2.1 is devoted to the case of the free-running laser ( class-A laser ) and discusses in particular, at the end, the cubic single-mode laser model which is the simplest model capable of describing a laser. On the other hand, in Section 19.2.2 we discuss the case of optical bistability in the good-cavity limit. If we eliminate adiabatically the atomic polarization only, we obtain, instead, the single- mode rate equations which are discussed in Section 19.3. In particular, Section 19.3.1 concerns the case of class-B lasers and focusses especially on the phenomenon of relaxation oscillations. Special attention is paid to demonstrating the equivalence of the model which describes class-B lasers to the rate-equation laser model derived in Chapter 1 and the semiconductor laser model obtained in Chapter 16. In Section 19.3.2 we describe the generation of a giant pulse in class-B lasers, a phenomenon which is called active Q- switching . The final section, Section 19.4, deals with the model obtained by adiabatically eliminating the field variable in the so-called bad-cavity limit . Classification of lasers Arecchi [243] identifies three especially important kinds of laser, which he calls class-A, class-B and class-C lasers, respectively. (1) Class-A lasers are characterized by the condition κ ≪ γ ⊥ , γ ∥ . In this case the atomic variables can be adiabatically eliminated. The He–Ne laser, argon laser and quantum-cascade laser belong to this class.