Abstract Actual computations of fixed points and eigenvalues usually involve approximations, often crude ones, except for a very limited number of simple cases such as the one-dimensional Ising model of the previous chapter. In real- and momentum-space renormalization group theory, there are no general prescriptions to systematically improve the degree of the approximation with a modest amount of effort. There are established methods to systematically improve precision, but they usually need a large amount of numerical calculations. The scope of the present chapter is modest as we limit ourselves to basic examples, including the epsilon expansion about the Gaussian fixed-point of the Landau-Ginzburg-Wilson model. Finally, the last section illustrates the extension of the renormalization group framework to study quantum phase transitions.
Abstract Actual computations of fixed points and eigenvalues usually involve approximations, often crude ones, except for a very limited number of simple cases such as the one-dimensional Ising model of the previous chapter. In real- and momentum-space renormalization group theory, there are no general prescriptions to systematically improve the degree of the approximation with a modest amount of effort. There are established methods to systematically improve precision, but they usually need a large amount of numerical calculations. The scope of the present chapter is modest as we limit ourselves to basic examples, including the epsilon expansion about the Gaussian fixed-point of the Landau-Ginzburg-Wilson model. Finally, the last section illustrates the extension of the renormalization group framework to study quantum phase transitions.
Abstract In Chapter 8 we gave an introduction to the formalism of the renormalization group. A renormalization transformation changes the scale of a system by a factor b. Systems at criticality flow to fixed points under the transformation and their critical exponents and scaling behaviour are determined by linearizing the recursion equations about the fixed point. The aim of this chapter is two-fold: firstly to illustrate these ideas by giving several examples of renormalization group transformations and secondly to demonstrate the ways in which they can be used to calculate critical properties. Our examples are divided into three classes. In Section 9.1, we shall consider a one-dimensional model where the recursion relations can be written down exactly. The drawback of this as a canonical example is that any critical behaviour is at zero temperature. The decimation transformation presented in one dimension is an example of a real-space transformation and the second task, in Section 9.2, is to show how these may be used approximately to treat models in higher dimensions. Thirdly, in Section 9.5, we shall mention the E-expansion where the renormalization takes place in momentum space. This enables an understanding of the crossover to mean-field behaviour. However, the formalism is somewhat involved and the details are beyond the scope of this book.
Abstract Chapter 5 first recalls the importance of the concept of scale decoupling in physics. It then emphasizes that quantum field theory and the theory of critical phenomena have provided two examples where this concepts fails. To deal with such a situation, a new tool has been invented: the renormalization group. In the framework of effective quantum field theory, a perturbative renormalization group has been formulated. Its implementation has led to the discovery of fixed points as zeros of beta functions, and calculations of critical exponents of a class of macroscopic phase transitions in the form of Wilson–Fisher epsilon or fixed dimension expansions. These expansions being divergent, they could summed by methods based on the Borel transformation and the determination of the large order behaviour of perturbation theory.
A new field opened when modern computers offered the possibility of performing extensive simulations of large systems. This allows known behaviours to be checked and provides an exploratory guide in circumstances where theoretical tools are absent. Measurements of observables can be compared both to existing theoretical expectations – providing a crucial test for their validity – and to experiments – checking the modelling of a physical system –. This chapter presents the background material needed to design simulations on a (relatively) large scale. Some numerical examples have already been presented in previous chapters, and we only give a few further illustrations, pertaining mainly to lattice gauge theory, the usefulness of which relies extensively on this method. We also describe a practical implementation of real space renormalization, known as the Monte Carlo Renormalization Group method (Ma, Swendsen, Wilson). Finally, we discuss specific issues relevant to the extension of the simulations to fermionic systems. Algorithms Generalities Systems with up to 10 6 to 10 7 variables can be handled by computers, and these numbers may soon be significantly increased. The measurements can be sufficiently numerous to allow statistical accuracy. Although simulated systems still have a modest size as compared to macroscopic systems, collective effects already clearly appear and accurate results about critical phenomena emerge from the numerical simulations. It turns out, when investigating more closely the available numerical methods, that one gets a better insight into the foundations of equilibrium statistical physics, the ergodicity problems, the meaning of probabilities and, last but not least, ways to approach equilibrium.
In this chapter we introduce the renormalization group approach to critical phenomena. In contrast to Chapter 5, we do not proceed historically, but begin in Section 6.1 with a renormalization treatment of a simple exactly solvable model, the familiar Ising chain (Section 3.6). We proceed in Section 6.2 to discuss properties of fixed points, the relation to scaling, and the notion of universality. Section 6.3 continues with the cumulant approximation in the context of the position space renormalization group, and the critical exponents are calculated approximately, but in a nontrivial fashion, for a two-dimensional model. In Section 6.4 we describe the application of other position space renormalization methods to phase transitions . The “phenomenological renormalization group”, based on the finite-size scaling ideas introduced in Section 5.4, is the subject of Section 6.5. We conclude this chapter with Section 6.6 in which the momentum space approach and the ɛ expansion are developed.
The real space renormalisation group has a wide application in the study of classical critical phenomena. For quantum systems, several versions of the real space renormalisation group have been proposed (Jullien, 1981; Pfeuty et al., 1982; dos Santos, 1982). The real space RG is the most direct way of implementing the scaling ideas presented in Chapter 1. The operation of elimination of degrees of freedom as the system is reduced to blocks of smaller sizes under a change of length scale is directly and intuitively represented as mathematical equations. In particular, the block method has been used to study different problems of strongly correlated systems (Pfeuty et al., 1982) and spin chains (White, 1992, 1993) with different degrees of sophistication. We show here in detail a simple form of this technique applied to the case of the one-dimensional Ising model in a transverse field. The purpose is to illustrate the ideas introduced earlier in Chapter 1 with a concrete example where a quantum critical point is associated with an unstable fixed point. Also, we show how the stable attractors or fixed points can characterise the different phases and how the critical exponents can be obtained. Although the actual values for the quantum critical point and critical exponents that we obtain using a small block are not exact, a procedure is outlined which can be used to improve these results. In this sense, the block method presented here represents a controlled approximation, which can be systematically improved to yield in the limit of very large blocks essentially the correct results. When compared to the k-space version of the RG (to be presented in the next two chapters), the real space version turns out to be in general more difficult to control, in the sense of producing a systematic improvement of the results. On the other hand, this method yields without much effort the attractive fixed points of the different phases, allowing for their characterisation. This turns out to be useful since the nature of the phase transition, whether first or second order, can be determined by exponents calculated in the attractor of this phase (Nienhuis and Naunberg, 1975).
The renormalization-group (RG) method discussed in this chapter has assumed a pivotal role in the modern theory of critical phenomena. It attempts to relate the partition function of a given system to that of a “similar system” with decreased degrees of freedom through a process referred to as renormalization. Exactly how these degrees of freedom are removed from the system, what we mean by a “similar” system, and how successive systems are coupled to one another are essentially the questions we take up in the introductory treatment given in this chapter. The RG method is a topic with large scope and found widely disseminated in an extensive physics literature on the topic; however, it is seldom found in engineering journals. Our purpose here is to try and make sense of some basic ideas with the RG approach so that it is more accessible to this wider community. For this we often rely upon some prior exposes of the subject in more specialized settings [1, 2, 3, 5]. In its complete sense, the RG method has only been made to work, at least analytically, for a few simple statistical-mechanical models. But aside from these numerical results, many important and quite general insights about critical phenomena can be developed from studying this approach to the problem, especially the central role played by length scale as a factor in describing the phenomenology. These ideas have significantly enhanced our understanding of ideas like scale invariance, universality classes, relevant scaling fields (as opposed to irrelevant ones), Hamiltonian renormalization, and so on; these and related concepts lie at the center of modern discourse on the subject. The essential concepts of the approach can be well illustrated using the Ising system since, with this model, lattice spins are fixed in space, which makes the analytical work quite transparent. This approach, called real space renormalization, is the RG method studied in this chapter.