Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Cambridge University Press eBooks

Constrained-likelihood quantum measurement theory

B. Roy Frieden

Published Dec 10, 1998• 1 citation
Publisher

Abstract

In preceding chapters, EPI has been used as a computational procedure for establishing the physical laws governing various measurement scenarios. We showed, by means of the optical measurement model of Sec. 3.8, that EPI is, as well, a physical process that is initiated by a measurement. Specifically, it arises out of the interaction of the measuring instrument's probe particle with the object under measurement. This perturbs the system probability amplitudes, which perturbs the informations I and J, etc., as indicated in Figs. 3.3 and 3.4. The result is that EPI derives the phenomenon's physics as it exists at the input space to the measuring device.

DOI
10.1017/cbo9780511622670.011

Related papers

Constrained-likelihood quantum measurement theory

B. Roy Frieden

In preceding chapters, EPI has been used as a computational procedure for establishing the physical laws governing various measurement scenarios. We showed, by means of the optical measurement model of Sec. 3.8, that EPI is, as well, a physical process that is initiated by a measurement. Specifically, it arises out of the interaction of the measuring instrument's probe particle with the object under measurement. This perturbs the system probability amplitudes, which perturbs the informations I and J, etc., as indicated in Figs. 3.3 and 3.4. The result is that EPI derives the phenomenon's physics as it exists at the input space to the measuring device.

Cambridge University Press eBooks•Jun 10, 2004•0 citations

Introduction

B. Roy Frieden

Aims of the book The primary aim of this book is to develop a theory of measurement that incorporates the observer into the phenomenon under measurement. By this theory, the observer becomes both a collector of data and an activator of the phenomenon that gives rise to the data. These ideas have probably been best stated by J. A. Wheeler (1990; 1994): All things physical are information-theoretic in origin and this is a participatory universe … Observer participancy gives rise to information; and information gives rise to physics. The measurement theory that will be presented is largely, in fact, a quantification of these ideas. However, the reader might be surprised to find that the “information” that is used is not the usual Shannon or Boltzmann entropy measures, but one that is relatively unknown to physicists, that of R. A. Fisher. The measurement theory is simply a description of how Fisher information flows from a physical source effect to a data space. It therefore applies to all scenarios where quantitative data from repeatable experiments may be collected. This describes measurement scenarios of physics but, also, of science in general. The theory of measurement is found to define an analytical procedure for deriving all laws of science. The approach is called EPI, for “extreme physical information.” The secondary aim of the book is to show, by example, that most existing laws of science fit within the EPI framework. That is, they can be derived by its use. (Many can of course be derived by other approaches, but, apparently, no other single approach can derive all of them.) In this way the EPI approach unifies science under an umbrella of measurement and information.

Cambridge University Press eBooks•Jun 10, 2004•0 citations

Foundation for Fisher-information-based derivations of physical laws

B. Roy Frieden, W. J. Cocke

The principle of extreme physical information (EPI) places physics on an information-theoretic footing. It yields many of the fundamental wave equations of physics (of Klein-Gordon, Dirac, etc.). EPI is based upon the measurement of particle four-vectors ${\mathbf{\ensuremath{\theta}}}_{\mathit{n}}$ with random errors ${\mathbf{x}}_{\mathit{n}}$, n=1,...,N. This leads to an additive Fisher information form whose extremization provides the derivations. However, the model measurement procedure was, in the past, overly restrictive: the real and imaginary parts ${\mathit{q}}_{\mathit{n}}$(x), n=1,...,N of the probability amplitude functions for the fluctuations were required to have nonoverlapping support regions. Here we rederive the requisite information form without this restriction. Our model measurement procedure is simply the efficient collection of four-data, that is, N independent measurements of four-coordinates of particles of the field. In effect, each measurement defines a different degree of freedom ${\mathit{q}}_{\mathit{n}}$(x) of the scenario. \textcopyright{} 1996 The American Physical Society.

Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics•Jul 1, 1996•26 citations

EPI and entangled realities: the EPR–Bohm experiment

B. Roy Frieden

Electron spin was derived by the use of EPI in Chapter 4, in the context of the Dirac equation. This was for the scenario of a single particle. Here, by comparison, we treat spin for a two-particle scenario, that of the well-known EPR–Bohm experiment. A general two-particle PDF can exhibit correlation. We show that the well-known probabilities of spin-pair combinations in the EPR–Bohm experiment follow simply from EPI; and that these do obey certain well-known correlation effects. See also a related derivation by S. Luo (2002). Information J was previously regarded as the “bound” information (Chapter 3), in the sense of the amount of information that is bound to the unobserved source phenomenon. Here we find that it can also represent a degree of information entanglement between two particles : At the EPI solution, the information J for the observed particle equals the information I for the un observed one. Or, the source of information for the observed particle is the unobserved one. A final point of interest will be the use, in Sec. 12.4, of the game corollary | I | = min . (Eq. (3.21)) to determine a vital free parameter of the problem. This approach is also used in Chapter 4 to establish the appropriate number N of amplitude functions to describe various quantum particles, and in Chapter 15 to determine the unknown exponent of a power law for cancer growth. All parameters in the preceding are unitless, as is required for the use of Eq. (3.21). See further discussion in Sec. 12.10.

Cambridge University Press eBooks•Jun 10, 2004•0 citations

The Formal Theory of Quantum Mechanics

In classical mechanics, the state of a physical object is determined by quantities such as mass, momentum, and angular momentum. According to Newton’s laws, for a given initial state, the evolution of the system is deterministic—that is, the state of the object (i.e., its parameters) can be precisely predicted at any future time. In quantum mechanics, however, based on the theory of matter waves, the state of a system is described by a probability wave function. Given an initial state, the time evolution of the system is governed by the Schrödinger equation, which determines the probability distribution of the particle’s position (or other observables) in space over time. The probabilistic nature of the quantum state implies that prior to measurement, the system may exist in a superposition of possible states, each associated with a certain probability amplitude. In physics, measurement refers to the experimental determination of mechanical quantities such as position, momentum, energy, and angular momentum. In classical mechanics, the act of measurement does not influence the physical state of the object; the system remains unaffected by the observation. In contrast, quantum measurement fundamentally alters the state: once a definite value of an observable is measured, the wave function collapses to the corresponding eigenstate. This signifies that the probabilistic description of the system with respect to that observable becomes a definite state—the system’s wave function is projected accordingly. Thus, the state of a quantum system is inherently measurement-dependent, and by measuring a mechanical quantity, one effectively determines the corresponding probability distribution, or wave function, associated with that observable. Therefore, the relationship between observables (mechanical quantities) and state wave functions, as well as the mathematical structure connecting them, constitutes one of the central concerns of quantum theory. As previously discussed, the Schrödinger equation involves expressions for energy and momentum that act on wave functions in the form of operators. Accordingly, we now proceed to explore the formalism of quantum mechanics based on the concept of operators.

WORLD SCIENTIFIC eBooks•Sep 16, 2026•0 citations

Quantum state reconstruction and optimal manipulations with quantum information (1996 IOC Prize Winner)

Vladimír Bužek

The concept of a quantum state represents one of the most fundamental pillars of the paradigm of quantum theory.'3 Contrary to its mathematical elegance and convenience in calculations, the physical interpretation of a quantum state is not so transparent. The problem is that the quantum state (described either by a state vector, or density operator or a phase-space probability density distribution) does not have a well defined objective status, i.e. a state vector is not an objective property of a particle. According to Peres (see,1 p. 374): "There is no physical evidence whatsoever that every physical system has at every instant a well defined state. .. In strict interpretation of quantum theory these mathematical symbols [i.e., state vectorsi represent statistical information enabling us to compute the probabilities of occurrence of specific events." Once this point of view is adopted then it becomes clear that any "measurement" or a reconstruction of a density operator (or its mathematical equivalent) can be understood exclusively as an expression of our knowledge about the quantum mechanical state based on a certain set of measured data. To be more specific, any quantum-mechanical reconstruction scheme is nothing more than an a posteriori estimation of the density operator of a quantum-mechanical (microscopic) system based on data obtained with the help of a macroscopic measurement apparatus.3 The quality of the reconstruction depends on the "quality" of the measured data and the efficiency of the reconstruction procedure with the help of which the data analysis is performed. In particular, we can specify three different situations. Firstly, when all system observables are precisely measured. In this case the complete reconstruction of an initially unknown state can be performed (we will call this the reconstruction on the complete observation level) . Secondly, when just part of the system observables is precisely measured then one cannot perform a complete reconstruction of the measured state. Nevertheless, the reconstructed density operator still uniquely determines mean values of the measured observables (we will denote this scheme as reconstruction on incomplete observation levels) . Finally, when measurement does not provide us with sufficient information to specify the exact mean values (or probability distributions) but only the frequencies of appearances of eigenstates of the measured observables, then one can perform an estimation (e.g. reconstruction based on quantum Bayesian inference) which is the "best" with respect to the given measured data and the a priori knowledge about the state of the measured system.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Jul 19, 1999•0 citations
In preceding chapters, EPI has been used as a computational procedure for establishing the physical laws governing various measurement scenarios. We showed, by means of the optical measurement model of Sec. 3.8, that EPI is, as well, a physical process that is initiated by a measurement. Specifically, it arises out of the interaction of the measuring instrument's probe particle with the object under measurement. This perturbs the system probability amplitudes, which perturbs the informations I and J, etc., as indicated in Figs. 3.3 and 3.4. The result is that EPI derives the phenomenon's physics as it exists at the input space to the measuring device.
In preceding chapters, EPI has been used as a computational procedure for establishing the physical laws governing various measurement scenarios. We showed, by means of the optical measurement model of Sec. 3.8, that EPI is, as well, a physical process that is initiated by a measurement. Specifically, it arises out of the interaction of the measuring instrument's probe particle with the object under measurement. This perturbs the system probability amplitudes, which perturbs the informations I and J, etc., as indicated in Figs. 3.3 and 3.4. The result is that EPI derives the phenomenon's physics as it exists at the input space to the measuring device.
Aims of the book The primary aim of this book is to develop a theory of measurement that incorporates the observer into the phenomenon under measurement. By this theory, the observer becomes both a collector of data and an activator of the phenomenon that gives rise to the data. These ideas have probably been best stated by J. A. Wheeler (1990; 1994): All things physical are information-theoretic in origin and this is a participatory universe … Observer participancy gives rise to information; and information gives rise to physics. The measurement theory that will be presented is largely, in fact, a quantification of these ideas. However, the reader might be surprised to find that the “information” that is used is not the usual Shannon or Boltzmann entropy measures, but one that is relatively unknown to physicists, that of R. A. Fisher. The measurement theory is simply a description of how Fisher information flows from a physical source effect to a data space. It therefore applies to all scenarios where quantitative data from repeatable experiments may be collected. This describes measurement scenarios of physics but, also, of science in general. The theory of measurement is found to define an analytical procedure for deriving all laws of science. The approach is called EPI, for “extreme physical information.” The secondary aim of the book is to show, by example, that most existing laws of science fit within the EPI framework. That is, they can be derived by its use. (Many can of course be derived by other approaches, but, apparently, no other single approach can derive all of them.) In this way the EPI approach unifies science under an umbrella of measurement and information.
The principle of extreme physical information (EPI) places physics on an information-theoretic footing. It yields many of the fundamental wave equations of physics (of Klein-Gordon, Dirac, etc.). EPI is based upon the measurement of particle four-vectors ${\mathbf{\ensuremath{\theta}}}_{\mathit{n}}$ with random errors xn{\mathbf{x}}_{\mathit{n}}xn​, n=1,...,N. This leads to an additive Fisher information form whose extremization provides the derivations. However, the model measurement procedure was, in the past, overly restrictive: the real and imaginary parts qn{\mathit{q}}_{\mathit{n}}qn​(x), n=1,...,N of the probability amplitude functions for the fluctuations were required to have nonoverlapping support regions. Here we rederive the requisite information form without this restriction. Our model measurement procedure is simply the efficient collection of four-data, that is, N independent measurements of four-coordinates of particles of the field. In effect, each measurement defines a different degree of freedom qn{\mathit{q}}_{\mathit{n}}qn​(x) of the scenario. \textcopyright{} 1996 The American Physical Society.
Electron spin was derived by the use of EPI in Chapter 4, in the context of the Dirac equation. This was for the scenario of a single particle. Here, by comparison, we treat spin for a two-particle scenario, that of the well-known EPR–Bohm experiment. A general two-particle PDF can exhibit correlation. We show that the well-known probabilities of spin-pair combinations in the EPR–Bohm experiment follow simply from EPI; and that these do obey certain well-known correlation effects. See also a related derivation by S. Luo (2002). Information J was previously regarded as the “bound” information (Chapter 3), in the sense of the amount of information that is bound to the unobserved source phenomenon. Here we find that it can also represent a degree of information entanglement between two particles : At the EPI solution, the information J for the observed particle equals the information I for the un observed one. Or, the source of information for the observed particle is the unobserved one. A final point of interest will be the use, in Sec. 12.4, of the game corollary | I | = min . (Eq. (3.21)) to determine a vital free parameter of the problem. This approach is also used in Chapter 4 to establish the appropriate number N of amplitude functions to describe various quantum particles, and in Chapter 15 to determine the unknown exponent of a power law for cancer growth. All parameters in the preceding are unitless, as is required for the use of Eq. (3.21). See further discussion in Sec. 12.10.
In classical mechanics, the state of a physical object is determined by quantities such as mass, momentum, and angular momentum. According to Newton’s laws, for a given initial state, the evolution of the system is deterministic—that is, the state of the object (i.e., its parameters) can be precisely predicted at any future time. In quantum mechanics, however, based on the theory of matter waves, the state of a system is described by a probability wave function. Given an initial state, the time evolution of the system is governed by the Schrödinger equation, which determines the probability distribution of the particle’s position (or other observables) in space over time. The probabilistic nature of the quantum state implies that prior to measurement, the system may exist in a superposition of possible states, each associated with a certain probability amplitude. In physics, measurement refers to the experimental determination of mechanical quantities such as position, momentum, energy, and angular momentum. In classical mechanics, the act of measurement does not influence the physical state of the object; the system remains unaffected by the observation. In contrast, quantum measurement fundamentally alters the state: once a definite value of an observable is measured, the wave function collapses to the corresponding eigenstate. This signifies that the probabilistic description of the system with respect to that observable becomes a definite state—the system’s wave function is projected accordingly. Thus, the state of a quantum system is inherently measurement-dependent, and by measuring a mechanical quantity, one effectively determines the corresponding probability distribution, or wave function, associated with that observable. Therefore, the relationship between observables (mechanical quantities) and state wave functions, as well as the mathematical structure connecting them, constitutes one of the central concerns of quantum theory. As previously discussed, the Schrödinger equation involves expressions for energy and momentum that act on wave functions in the form of operators. Accordingly, we now proceed to explore the formalism of quantum mechanics based on the concept of operators.
The concept of a quantum state represents one of the most fundamental pillars of the paradigm of quantum theory.'3 Contrary to its mathematical elegance and convenience in calculations, the physical interpretation of a quantum state is not so transparent. The problem is that the quantum state (described either by a state vector, or density operator or a phase-space probability density distribution) does not have a well defined objective status, i.e. a state vector is not an objective property of a particle. According to Peres (see,1 p. 374): "There is no physical evidence whatsoever that every physical system has at every instant a well defined state. .. In strict interpretation of quantum theory these mathematical symbols [i.e., state vectorsi represent statistical information enabling us to compute the probabilities of occurrence of specific events." Once this point of view is adopted then it becomes clear that any "measurement" or a reconstruction of a density operator (or its mathematical equivalent) can be understood exclusively as an expression of our knowledge about the quantum mechanical state based on a certain set of measured data. To be more specific, any quantum-mechanical reconstruction scheme is nothing more than an a posteriori estimation of the density operator of a quantum-mechanical (microscopic) system based on data obtained with the help of a macroscopic measurement apparatus.3 The quality of the reconstruction depends on the "quality" of the measured data and the efficiency of the reconstruction procedure with the help of which the data analysis is performed. In particular, we can specify three different situations. Firstly, when all system observables are precisely measured. In this case the complete reconstruction of an initially unknown state can be performed (we will call this the reconstruction on the complete observation level) . Secondly, when just part of the system observables is precisely measured then one cannot perform a complete reconstruction of the measured state. Nevertheless, the reconstructed density operator still uniquely determines mean values of the measured observables (we will denote this scheme as reconstruction on incomplete observation levels) . Finally, when measurement does not provide us with sufficient information to specify the exact mean values (or probability distributions) but only the frequencies of appearances of eigenstates of the measured observables, then one can perform an estimation (e.g. reconstruction based on quantum Bayesian inference) which is the "best" with respect to the given measured data and the a priori knowledge about the state of the measured system.