Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Flux Qubits in Three-Dimensional Circuit-QED Architecture

Michael Stern, Yuimaru Kubo, Cécile Grèzes, Audrey Bienfait, D. Vion, D. Estève, Patrice Bertet

Published Mar 16, 2014• 1 citation
OpenAlex

Abstract

We present measurements of superconducting flux qubits embedded in a three dimensional copper cavity. The qubits are fabricated on a sapphire substrate and are measured by coupling them inductively to an on-chip superconducting resonator located in the middle of the cavity. At their flux-insensitive point, all measured qubits reach an intrinsic energy relaxation time in the 6-20 microseconds range and a pure dephasing time comprised between 3 and 10 microseconds. This significant improvement over previous works opens the way to the coherent coupling of a flux-qubit to individual spins.

Related papers

Flux Qubits with Long Coherence Times for Hybrid Quantum Circuits

Michael Stern, Gianluigi Catelani, Yuimaru Kubo +5 more

We present measurements of superconducting flux qubits embedded in a three dimensional copper cavity. The qubits are fabricated on a sapphire substrate and are measured by coupling them inductively to an on-chip superconducting resonator located in the middle of the cavity. At their flux-insensitive point, all measured qubits reach an intrinsic energy relaxation time in the 6-20 μs range and a pure dephasing time comprised between 3 and 10 μs. This significant improvement over previous works opens the way to the coherent coupling of a flux qubit to individual spins.

arXiv:1403.3871•Physical Review Letters•Sep 19, 2014•157 citations

Flux qubits in a planar circuit quantum electrodynamics architecture: Quantum control and decoherence

Jean-Luc Orgiazzi, C. Deng, David Layden +6 more

We report experiments on superconducting flux qubits in a circuit quantum electrodynamics (cQED) setup. Two qubits, independently biased and controlled, are coupled to a coplanar waveguide resonator. Dispersive qubit state readout reaches a maximum contrast of 72%. We measure energy relaxation times at the symmetry point of 5 and $10\ensuremath{\mu}\mathrm{s}$, corresponding to 7 and $20\ensuremath{\mu}\mathrm{s}$ when relaxation through the resonator due to Purcell effect is subtracted out, and levels of flux noise of 2.6 and $2.7\phantom{\rule{0.222222em}{0ex}}\ensuremath{\mu}{\mathrm{\ensuremath{\Phi}}}_{0}/\sqrt{\text{Hz}}$ at 1 Hz for the two qubits. We discuss the origin of decoherence in the measured devices. The strong coupling between the qubits and the cavity leads to a large, cavity-mediated, qubit-qubit coupling. This coupling, which is characterized spectroscopically, reaches 38 MHz. These results demonstrate the potential of cQED as a platform for fundamental investigations of decoherence and quantum dynamics of flux qubits.

arXiv:1407.1346•Physical review. B./Physical review. B•Mar 15, 2016•60 citations

Tunable Superconducting Flux Qubits with Long Coherence Times

Tikai Chang, Tamar Jehuda Cohen, Itamar Holzman +2 more

In this work, we study a series of tunable flux qubits inductively coupled to a coplanar waveguide resonator fabricated on a sapphire substrate. Each qubit includes an asymmetric superconducting quantum interference device, which is controlled by the application of an external magnetic field and acts as a tunable Josephson junction. The tunability of the qubits is typically $\ifmmode\pm\else\textpm\fi{}3.5\phantom{\rule{0.2em}{0ex}}\mathrm{GHz}$ around their central gap frequency. The measured relaxation times are limited by dielectric losses in the substrate and can attain ${T}_{1}\ensuremath{\sim}8\phantom{\rule{0.2em}{0ex}}\text{\ensuremath{\mu}}\mathrm{s}$. The echo dephasing times are limited by flux noise even at optimal points and reach ${T}_{2E}\ensuremath{\sim}4\phantom{\rule{0.2em}{0ex}}\text{\ensuremath{\mu}}\mathrm{s}$, almost an order of magnitude longer than state of the art.

arXiv:2207.01460•Physical Review Applied•Feb 24, 2023•17 citations

A long-lived capacitively shunted flux qubit embedded in a 3D cavity

Leonid V. Abdurakhimov, Imran Mahboob, Hiraku Toida +2 more

We report the experimental realization of a 3D capacitively shunt superconducting flux qubit with long coherence times. At the optimal flux bias point, the qubit demonstrates energy relaxation times in the range of 60–90 μs and a Hahn-echo coherence time of about 80 μs, which can be further improved by dynamical decoupling. Qubit energy relaxation can be attributed to quasiparticle tunneling and unwanted two-level-system defects, while qubit dephasing is caused by flux noise away from the optimal point. Our results show that 3D c-shunt flux qubits demonstrate improved performance over other types of flux qubits, which is advantageous for applications such as quantum magnetometry and spin sensing.

arXiv:1911.04635•Applied Physics Letters•Dec 23, 2019•44 citations

Superconducting flux qubit for quantum thermodynamics experiments

Upadhyay, Rishabh

Advancements in the field of cavity quantum electrodynamics (c-QED) have deepened understanding of quantum phenomena, enabled reliable Josephson junction-based devices, and facilitated their integration with other quantum technologies to explore new physics and applications. Motivated by these developments, this thesis aims to construct a testbed for studying quantum thermodynamics using a superconducting flux qubit. The flux qubit is particularly suited for thermodynamic experiments due to its strong anharmonicity and its galvanic coupling architectures that facilitate efficient energy transport. In this thesis, the on-chip components include harmonic oscillators realized as superconducting resonators, a strongly nonlinear superconducting flux qubit, two copper thermal reservoirs modelled as Johnson–Nyquist noise sources and NIS thermometers, integrated on a highly resistive silicon platform that acts as a phonon bath. These components enable the study and optimization of heat transport between the metallic reservoirs, mediated by the quantum circuit, with the flux qubit as the central, flux-tunable working substance. Heat transport through the qubit occurs via sequential excitation and relaxation cycles between its ground and excited states, where excitation extracts heat equal to the qubit’s energy gap from the hot reservoir, while relaxation releases the same energy into the cold reservoir. Enhancing the thermal device’s performance critically depends on the coupling strength between on-chip components, particularly between the qubit and resonator. This thesis commences with the investigation and demonstration of a robust qubit–resonator coupling design that achieves the ultrastrong regime experimentally. Building on this result, the developed architecture is extended to connect the qubit with two identical resonators, symmetrically positioned on the two sides. These resonators are, in turn, coupled to metallic reservoirs, enabling the first ever demonstration of flux qubit-controlled heat transport between the two reservoirs with excellent device performance. Added geometric asymmetry in the coupler, combined with the flux qubit’s strong anharmonicity, enables the successful demonstration--presented in this thesis--of a non-reciprocal device such as the Microwave Quantum Diode, which, together with the reservoirs, could potentially form an efficient thermal diode. Finally, the thesis concludes with a brief outlook on future directions and ongoing experiments that build on the flux qubit–based testbed developed here for exploring quantum thermodynamic phenomena and device applications.

•Jan 1, 2025•0 citations

Magnetic flux measurement of superconducting qubits with Josephson inductors

Janice C. Lee

Recent research in quantum computation with superconducting qubits relies on SQUID magnetometers to distinguish the supercurrent states of the qubits.This poses a new challenge of demanding the measurement SQUID to introduce the least decoherence on the qubits during the measurement process.The SQUID is desired to operate in an unconventional way and be biased at currents significantly below the critical current level.This thesis lays the fundamental work of achieving the above by using the SQUID as a flux-sensitive inductor.The read-out relies on incorporating the SQUID inductor in a resonant circuit, and the state of the qubit is detected from the resonant frequency of the peak.A series of prototype resonant circuits were made from printed circuit boards and tested at room temperature.On-chip high-Q resonant circuits were designed to optimize the signals in the inductance measurements to about ten microvolts.Calculations of the decoherence times based on the spin-boson model were performed and the relaxation time falls in the microsecond regime.

•Jan 1, 2002•1 citation
We present measurements of superconducting flux qubits embedded in a three dimensional copper cavity. The qubits are fabricated on a sapphire substrate and are measured by coupling them inductively to an on-chip superconducting resonator located in the middle of the cavity. At their flux-insensitive point, all measured qubits reach an intrinsic energy relaxation time in the 6-20 microseconds range and a pure dephasing time comprised between 3 and 10 microseconds. This significant improvement over previous works opens the way to the coherent coupling of a flux-qubit to individual spins.
We present measurements of superconducting flux qubits embedded in a three dimensional copper cavity. The qubits are fabricated on a sapphire substrate and are measured by coupling them inductively to an on-chip superconducting resonator located in the middle of the cavity. At their flux-insensitive point, all measured qubits reach an intrinsic energy relaxation time in the 6-20 μs range and a pure dephasing time comprised between 3 and 10 μs. This significant improvement over previous works opens the way to the coherent coupling of a flux qubit to individual spins.
We report experiments on superconducting flux qubits in a circuit quantum electrodynamics (cQED) setup. Two qubits, independently biased and controlled, are coupled to a coplanar waveguide resonator. Dispersive qubit state readout reaches a maximum contrast of 72%. We measure energy relaxation times at the symmetry point of 5 and $10\ensuremath{\mu}\mathrm{s}$, corresponding to 7 and $20\ensuremath{\mu}\mathrm{s}$ when relaxation through the resonator due to Purcell effect is subtracted out, and levels of flux noise of 2.6 and $2.7\phantom{\rule{0.222222em}{0ex}}\ensuremath{\mu}{\mathrm{\ensuremath{\Phi}}}_{0}/\sqrt{\text{Hz}}$ at 1 Hz for the two qubits. We discuss the origin of decoherence in the measured devices. The strong coupling between the qubits and the cavity leads to a large, cavity-mediated, qubit-qubit coupling. This coupling, which is characterized spectroscopically, reaches 38 MHz. These results demonstrate the potential of cQED as a platform for fundamental investigations of decoherence and quantum dynamics of flux qubits.
In this work, we study a series of tunable flux qubits inductively coupled to a coplanar waveguide resonator fabricated on a sapphire substrate. Each qubit includes an asymmetric superconducting quantum interference device, which is controlled by the application of an external magnetic field and acts as a tunable Josephson junction. The tunability of the qubits is typically $\ifmmode\pm\else\textpm\fi{}3.5\phantom{\rule{0.2em}{0ex}}\mathrm{GHz}$ around their central gap frequency. The measured relaxation times are limited by dielectric losses in the substrate and can attain ${T}_{1}\ensuremath{\sim}8\phantom{\rule{0.2em}{0ex}}\text{\ensuremath{\mu}}\mathrm{s}$. The echo dephasing times are limited by flux noise even at optimal points and reach ${T}_{2E}\ensuremath{\sim}4\phantom{\rule{0.2em}{0ex}}\text{\ensuremath{\mu}}\mathrm{s}$, almost an order of magnitude longer than state of the art.
We report the experimental realization of a 3D capacitively shunt superconducting flux qubit with long coherence times. At the optimal flux bias point, the qubit demonstrates energy relaxation times in the range of 60–90 μs and a Hahn-echo coherence time of about 80 μs, which can be further improved by dynamical decoupling. Qubit energy relaxation can be attributed to quasiparticle tunneling and unwanted two-level-system defects, while qubit dephasing is caused by flux noise away from the optimal point. Our results show that 3D c-shunt flux qubits demonstrate improved performance over other types of flux qubits, which is advantageous for applications such as quantum magnetometry and spin sensing.
Advancements in the field of cavity quantum electrodynamics (c-QED) have deepened understanding of quantum phenomena, enabled reliable Josephson junction-based devices, and facilitated their integration with other quantum technologies to explore new physics and applications. Motivated by these developments, this thesis aims to construct a testbed for studying quantum thermodynamics using a superconducting flux qubit. The flux qubit is particularly suited for thermodynamic experiments due to its strong anharmonicity and its galvanic coupling architectures that facilitate efficient energy transport. In this thesis, the on-chip components include harmonic oscillators realized as superconducting resonators, a strongly nonlinear superconducting flux qubit, two copper thermal reservoirs modelled as Johnson–Nyquist noise sources and NIS thermometers, integrated on a highly resistive silicon platform that acts as a phonon bath. These components enable the study and optimization of heat transport between the metallic reservoirs, mediated by the quantum circuit, with the flux qubit as the central, flux-tunable working substance. Heat transport through the qubit occurs via sequential excitation and relaxation cycles between its ground and excited states, where excitation extracts heat equal to the qubit’s energy gap from the hot reservoir, while relaxation releases the same energy into the cold reservoir. Enhancing the thermal device’s performance critically depends on the coupling strength between on-chip components, particularly between the qubit and resonator. This thesis commences with the investigation and demonstration of a robust qubit–resonator coupling design that achieves the ultrastrong regime experimentally. Building on this result, the developed architecture is extended to connect the qubit with two identical resonators, symmetrically positioned on the two sides. These resonators are, in turn, coupled to metallic reservoirs, enabling the first ever demonstration of flux qubit-controlled heat transport between the two reservoirs with excellent device performance. Added geometric asymmetry in the coupler, combined with the flux qubit’s strong anharmonicity, enables the successful demonstration--presented in this thesis--of a non-reciprocal device such as the Microwave Quantum Diode, which, together with the reservoirs, could potentially form an efficient thermal diode. Finally, the thesis concludes with a brief outlook on future directions and ongoing experiments that build on the flux qubit–based testbed developed here for exploring quantum thermodynamic phenomena and device applications.
Recent research in quantum computation with superconducting qubits relies on SQUID magnetometers to distinguish the supercurrent states of the qubits.This poses a new challenge of demanding the measurement SQUID to introduce the least decoherence on the qubits during the measurement process.The SQUID is desired to operate in an unconventional way and be biased at currents significantly below the critical current level.This thesis lays the fundamental work of achieving the above by using the SQUID as a flux-sensitive inductor.The read-out relies on incorporating the SQUID inductor in a resonant circuit, and the state of the qubit is detected from the resonant frequency of the peak.A series of prototype resonant circuits were made from printed circuit boards and tested at room temperature.On-chip high-Q resonant circuits were designed to optimize the signals in the inductance measurements to about ten microvolts.Calculations of the decoherence times based on the spin-boson model were performed and the relaxation time falls in the microsecond regime.