Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

AIP conference proceedings

Heat control in opto-mechanical system using quantum non-classicality

Sushamana Sharma, Subash Senwar

Published Jan 1, 2016• 0 citations
Publisher

Abstract

Cooling of matter to the quantum ground state is a primary directive of quantum control. In other words, to extract entropy from a quantum system, efficient indirect quantum measurements may be implemented. The main objective is the cooling of the oscillator either to its motional ground state or to non-classical states, such as low-number Fock states, squeezed states or entangled states. It is shown that the use of quantum control procedure is better choice for even experimental realizations because it leads to a squeezed steady state with less than one phonon on average. The steady state of system corresponds to cooling of the system.

DOI
10.1063/1.4946670

Related papers

Quantum cooling and squeezing of a levitating nanosphere via time-continuous measurements

Marco G. Genoni, Jinglei Zhang, James Millen +2 more

With the purpose of controlling the steady state of a dielectric nanosphere levitated within an optical cavity, we study its conditional dynamics under simultaneous sideband cooling and additional time-continuous measurement of either the output cavity mode or the nanosphere's position. We find that the average phonon number, purity and quantum squeezing of the steady-states can all be made more non-classical through the addition of time-continuous measurement. We predict that the continuous monitoring of the system, together with Markovian feedback, allows one to stabilize the dynamics for any value of the laser frequency driving the cavity. By considering state of the art values of the experimental parameters, we prove that one can in principle obtain a non-classical (squeezed) steady-state with an average phonon number .

arXiv:1503.05603•New Journal of Physics•Jul 14, 2015•46 citations

Dynamics of ground-state cooling and quantum entanglement in a modulated optomechanical system

Guoyao Li, Wenjie Nie, Xiyun Li +1 more

We theoretically study the dynamics of the ground-state cooling and the quantum entanglement in a modulated optomechanical system, where the frequency of the mechanical oscillator and the optical field or the strength of the driving laser is time dependent. In this paper, we focus mainly on the fact that the system works in the regime of blue detuning. It is found that in the long-time limit the steady-state phonon number can be decreased significantly so that the mechanical oscillator is cooled to the ground state by appropriately selecting the frequency and the amplitude of the modulation. Further, with the help of the dynamical modulation in the system, the time evolution of the entanglement preevaluation value displays the death and rebirth of quantum entanglement between the mechanical oscillator and the optical field, which correspond, respectively, to the increase and decrease of the effective phonon number of the mechanical oscillator. In particular, when the steady-state dynamics of the system is quasiperiodic, the dynamics of the entanglement preevaluation value exhibits a quasiperiodic behavior, which means that the quantum phenomena can be represented in nonlinear classical dynamics.

Physical Review A•Dec 2, 2019•23 citations

Laser cooling of quantum systems

Javier Cerrillo Moreno

In this thesis novel methods for the laser cooling of quantum systems are presented. The use of quantum interference allows for the tailored cancelation of heating processes, so that an approximation to a cooling operator is possible that does not rely on the rotating wave approximation. This makes these schemes considerably faster and more efficient than existing ground state cooling methods, and allow for a significant relaxation of current experimental constraints. Several approaches are investigated in different systems. On the one hand, a special laser configuration, applicable to trapped ions, atoms or cantilevers, generates a double dark state that eliminates both the blue sideband and the carrier transition. As a consequence, vanishing phonon occupation up to first order in the perturbative expansion is achieved. Underlying this scheme is a combined action of two cooling schemes which makes the proposal very stable under parameter fluctuations. Its suitability as a cooling scheme for several ions in a trap or for a cloud of atoms in a dipole trap is shown. On the other hand, a pulsed cooling scheme for optomechanical systems is presented. It can be implemented for both strongly and weakly coupled optomechanical systems in both weakly and highly dissipative cavities. Its underlying mechanism is based on interferometric control of optomechanical interactions, and its efficiency is demonstrated with pulse sequences that are obtained by using methods from optimal control. Finally, it is shown how this pulsed method can be combined with continuous measurement to drive mechanical oscillators to highly squeezed steady states. Its mechanism relies on the modification of the dissipation and measurement terms, which drive the system towards a specific quadrature eigenstate. The scheme is robust to measurement inefficiencies and works also with highly dissipative cavities, which makes it accessible to implementation with state of the art technology.

•Jan 1, 2012•0 citations

Quantum measurement and control in single-photon opto-mechanics

Sahar Basiri-Esfahani

Quantum opto-mechanics is a fast moving, broad research field which aims to investigate and control the interaction of light and the quantized motion of mechanical objects and the coupling between them. This allows one to engineer the mechanical quantum state by controlling and measuring the electromagnetic field, and conversely, to control the dynamical evolution of the optical field via its interaction with a mechanical system. Mechanical resonators are accessible in many different shapes and sizes, from kilogram scales in experiments that test gravitational theories to micro- and nano-scales in resolved sideband regime, where the frequency of the mechanical resonator is larger than the bandwidth of the optical cavity. In this regime, it is possible to cool the mechanical object to the ground state which allows a high degree of control and the ability to prepare interesting non-classical states, states that could aid in investigating the quantum dynamics of macroscopic objects. The field of quantum opto-mechanics is a promising testbed for quantum control technologies, such as fundamental tests of quantum mechanics, ultra-sensitive quantum sensors for precise measurements, phonon lasing, mechanical memories with long lifetime and quantum information processing. Furthermore, experiments are progressing toward strong opto-mechanical coupling regimes with single photons. This creates a platform that can take advantage of the nonlinear optical interactions to generate highly non-classical states in such light-matter interfaces. Photonic systems working in the single photon regime will be promising for low power applications and also for implementations of quantum information and computation. Motivated by these applications, this thesis consists of theoretical studies in the context of single photonics. This includes investigating non-classical mechanical state generation and mechanically controlling the dynamical evolution of optical fields in the strong coupling regime single photon opto-mechanics and furthermore, proposing a quantum sensor using single photonics. In this regard, we employ three important formalisms to treat and measure open quantum systems with non-Gaussian input fields: the conditional and unconditional cascaded master equations, Fock-state master equations and input-output Langevin equations. In the context of opto-mechanics, the system to be investigated is composed of two optical cavities with a coupling modulated via a mechanical resonator. In one case, a sequence of single photons are irreversibly sent to one of the optical cavities. After photons go through the opto-mechanical interaction, photon counting measurements are performed on the cavity output, conditionally steering the mechanical state to a highly non-classical Fock state. Numerical calculations are performed to predict the experimental parameters needed to generate a mechanical Fock state before the mechanical object is thermalized. In another case, the same opto-mechanical scheme is employed to conversely modify the state of the optical mode by engineering the state of the mechanical degree of freedom. In this case, it is shown that the opto-mechanical system operates as an effective beam splitter for the input single photons, with a transmission that can be controlled by tuning the number of excitations in the bulk mechanical resonator. When the mechanical resonator has a small coherent amplitude it acts as a quantum control, entangling the optical and mechanical degrees of freedom. As the coherent amplitude of the resonator increases, it acts as a classical control for the input photons. Finally, we propose a novel multi-purpose sensor architecture that can be used for force, refractive index and possibly local temperature detection. In this scheme, two coupled cavities behave as an effective beam splitter. This sensor is based on fourth order interference (the Hong-Ou-Mandel effect) and requires a sequence of single photon pulses and consequently has low pulse power. Changes in the parameter to be measured induce variations in the effective beam splitter reflectivity and result in changes to the visibility of interference. We propose that this generic scheme could be implemented with coupled L3 photonic crystal cavities and find that this system, which only relies on photon coincidence detection and does not need any spectral resolution, can estimate forces as small as 10-7 Newtons and can measure one part per million change in refractive index using a very low input power of 10-10 W.

•Sep 28, 2015•0 citations

Quantum enhanced feedback cooling of a mechanical oscillator using nonclassical light

Clemens Schäfermeier, Hugo Kerdoncuff, Ulrich B. Hoff +7 more

Laser cooling is a fundamental technique used in primary atomic frequency standards, quantum computers, quantum condensed matter physics and tests of fundamental physics, among other areas. It has been known since the early 1990s that laser cooling can, in principle, be improved by using squeezed light as an electromagnetic reservoir; while quantum feedback control using a squeezed light probe is also predicted to allow improved cooling. Here we show the implementation of quantum feedback control of a micro-mechanical oscillator using squeezed probe light. This allows quantum-enhanced feedback cooling with a measurement rate greater than it is possible with classical light, and a consequent reduction in the final oscillator temperature. Our results have significance for future applications in areas ranging from quantum information networks, to quantum-enhanced force and displacement measurements and fundamental tests of macroscopic quantum mechanics.

arXiv:1605.05949•Nature Communications•Nov 29, 2016•65 citations

Hybrid Atomic-Optomechanical Systems -- Observing Quantum Effects in Macroscopic Oscillators

Swati Singh

This thesis concentrates on generating and measuring non-classical states of mechanical oscillators by coupling them to atomic and molecular quantum systems. We start with a discussion of what novel physics can be explored by mechanical systems operating in the quantum regime. We then discuss one technique making it a possibility- cavity optomechanics, particularly optomechanical cooling. We investigate the limits of optomechanical cooling and review how the coupling of mechanical oscillators to external heat baths limits the minimum attainable phonon occupation number. As a possible alternative for circumventing clamping losses, we consider an all-optical approach where the mechanical element (in this case, a Bragg mirror) is suspended via optical forces, and discuss some limitations of this approach. We explore several schemes aimed at the generation of quantum states in mechanical oscillators. We consider specifically two examples: one in which the mechanical oscillator is coupled to polar molecules via dipole-dipole interaction, and another where it is magnetically coupled to a Bose condensate. The first example emphasizes that such an interaction can generate parametric squeezing and entanglement. The second scheme demonstrates that the back action of BEC spin measurements can be used to generate quantum states of motion of a mechanical oscillator. We then discuss possible methods for measuring the entire density matrix of a mechanical oscillator. The first method achieves the tomographic reconstruction of the mechanical Wigner function by coupling it simultaneously to a classical optical oscillator and a qubit. The second approach involves a state transfer scheme between momentum excitations of a bose-condensate in a cavity and a moving mirror of the cavity that is entirely mediated by the light field. We conclude with a discussion of the broader implications of this work, and some future research directions.

•Jan 1, 2012•0 citations
Cooling of matter to the quantum ground state is a primary directive of quantum control. In other words, to extract entropy from a quantum system, efficient indirect quantum measurements may be implemented. The main objective is the cooling of the oscillator either to its motional ground state or to non-classical states, such as low-number Fock states, squeezed states or entangled states. It is shown that the use of quantum control procedure is better choice for even experimental realizations because it leads to a squeezed steady state with less than one phonon on average. The steady state of system corresponds to cooling of the system.
With the purpose of controlling the steady state of a dielectric nanosphere levitated within an optical cavity, we study its conditional dynamics under simultaneous sideband cooling and additional time-continuous measurement of either the output cavity mode or the nanosphere's position. We find that the average phonon number, purity and quantum squeezing of the steady-states can all be made more non-classical through the addition of time-continuous measurement. We predict that the continuous monitoring of the system, together with Markovian feedback, allows one to stabilize the dynamics for any value of the laser frequency driving the cavity. By considering state of the art values of the experimental parameters, we prove that one can in principle obtain a non-classical (squeezed) steady-state with an average phonon number .
We theoretically study the dynamics of the ground-state cooling and the quantum entanglement in a modulated optomechanical system, where the frequency of the mechanical oscillator and the optical field or the strength of the driving laser is time dependent. In this paper, we focus mainly on the fact that the system works in the regime of blue detuning. It is found that in the long-time limit the steady-state phonon number can be decreased significantly so that the mechanical oscillator is cooled to the ground state by appropriately selecting the frequency and the amplitude of the modulation. Further, with the help of the dynamical modulation in the system, the time evolution of the entanglement preevaluation value displays the death and rebirth of quantum entanglement between the mechanical oscillator and the optical field, which correspond, respectively, to the increase and decrease of the effective phonon number of the mechanical oscillator. In particular, when the steady-state dynamics of the system is quasiperiodic, the dynamics of the entanglement preevaluation value exhibits a quasiperiodic behavior, which means that the quantum phenomena can be represented in nonlinear classical dynamics.
In this thesis novel methods for the laser cooling of quantum systems are presented. The use of quantum interference allows for the tailored cancelation of heating processes, so that an approximation to a cooling operator is possible that does not rely on the rotating wave approximation. This makes these schemes considerably faster and more efficient than existing ground state cooling methods, and allow for a significant relaxation of current experimental constraints. Several approaches are investigated in different systems. On the one hand, a special laser configuration, applicable to trapped ions, atoms or cantilevers, generates a double dark state that eliminates both the blue sideband and the carrier transition. As a consequence, vanishing phonon occupation up to first order in the perturbative expansion is achieved. Underlying this scheme is a combined action of two cooling schemes which makes the proposal very stable under parameter fluctuations. Its suitability as a cooling scheme for several ions in a trap or for a cloud of atoms in a dipole trap is shown. On the other hand, a pulsed cooling scheme for optomechanical systems is presented. It can be implemented for both strongly and weakly coupled optomechanical systems in both weakly and highly dissipative cavities. Its underlying mechanism is based on interferometric control of optomechanical interactions, and its efficiency is demonstrated with pulse sequences that are obtained by using methods from optimal control. Finally, it is shown how this pulsed method can be combined with continuous measurement to drive mechanical oscillators to highly squeezed steady states. Its mechanism relies on the modification of the dissipation and measurement terms, which drive the system towards a specific quadrature eigenstate. The scheme is robust to measurement inefficiencies and works also with highly dissipative cavities, which makes it accessible to implementation with state of the art technology.
Quantum opto-mechanics is a fast moving, broad research field which aims to investigate and control the interaction of light and the quantized motion of mechanical objects and the coupling between them. This allows one to engineer the mechanical quantum state by controlling and measuring the electromagnetic field, and conversely, to control the dynamical evolution of the optical field via its interaction with a mechanical system. Mechanical resonators are accessible in many different shapes and sizes, from kilogram scales in experiments that test gravitational theories to micro- and nano-scales in resolved sideband regime, where the frequency of the mechanical resonator is larger than the bandwidth of the optical cavity. In this regime, it is possible to cool the mechanical object to the ground state which allows a high degree of control and the ability to prepare interesting non-classical states, states that could aid in investigating the quantum dynamics of macroscopic objects. The field of quantum opto-mechanics is a promising testbed for quantum control technologies, such as fundamental tests of quantum mechanics, ultra-sensitive quantum sensors for precise measurements, phonon lasing, mechanical memories with long lifetime and quantum information processing. Furthermore, experiments are progressing toward strong opto-mechanical coupling regimes with single photons. This creates a platform that can take advantage of the nonlinear optical interactions to generate highly non-classical states in such light-matter interfaces. Photonic systems working in the single photon regime will be promising for low power applications and also for implementations of quantum information and computation. Motivated by these applications, this thesis consists of theoretical studies in the context of single photonics. This includes investigating non-classical mechanical state generation and mechanically controlling the dynamical evolution of optical fields in the strong coupling regime single photon opto-mechanics and furthermore, proposing a quantum sensor using single photonics. In this regard, we employ three important formalisms to treat and measure open quantum systems with non-Gaussian input fields: the conditional and unconditional cascaded master equations, Fock-state master equations and input-output Langevin equations. In the context of opto-mechanics, the system to be investigated is composed of two optical cavities with a coupling modulated via a mechanical resonator. In one case, a sequence of single photons are irreversibly sent to one of the optical cavities. After photons go through the opto-mechanical interaction, photon counting measurements are performed on the cavity output, conditionally steering the mechanical state to a highly non-classical Fock state. Numerical calculations are performed to predict the experimental parameters needed to generate a mechanical Fock state before the mechanical object is thermalized. In another case, the same opto-mechanical scheme is employed to conversely modify the state of the optical mode by engineering the state of the mechanical degree of freedom. In this case, it is shown that the opto-mechanical system operates as an effective beam splitter for the input single photons, with a transmission that can be controlled by tuning the number of excitations in the bulk mechanical resonator. When the mechanical resonator has a small coherent amplitude it acts as a quantum control, entangling the optical and mechanical degrees of freedom. As the coherent amplitude of the resonator increases, it acts as a classical control for the input photons. Finally, we propose a novel multi-purpose sensor architecture that can be used for force, refractive index and possibly local temperature detection. In this scheme, two coupled cavities behave as an effective beam splitter. This sensor is based on fourth order interference (the Hong-Ou-Mandel effect) and requires a sequence of single photon pulses and consequently has low pulse power. Changes in the parameter to be measured induce variations in the effective beam splitter reflectivity and result in changes to the visibility of interference. We propose that this generic scheme could be implemented with coupled L3 photonic crystal cavities and find that this system, which only relies on photon coincidence detection and does not need any spectral resolution, can estimate forces as small as 10-7 Newtons and can measure one part per million change in refractive index using a very low input power of 10-10 W.
Laser cooling is a fundamental technique used in primary atomic frequency standards, quantum computers, quantum condensed matter physics and tests of fundamental physics, among other areas. It has been known since the early 1990s that laser cooling can, in principle, be improved by using squeezed light as an electromagnetic reservoir; while quantum feedback control using a squeezed light probe is also predicted to allow improved cooling. Here we show the implementation of quantum feedback control of a micro-mechanical oscillator using squeezed probe light. This allows quantum-enhanced feedback cooling with a measurement rate greater than it is possible with classical light, and a consequent reduction in the final oscillator temperature. Our results have significance for future applications in areas ranging from quantum information networks, to quantum-enhanced force and displacement measurements and fundamental tests of macroscopic quantum mechanics.
This thesis concentrates on generating and measuring non-classical states of mechanical oscillators by coupling them to atomic and molecular quantum systems. We start with a discussion of what novel physics can be explored by mechanical systems operating in the quantum regime. We then discuss one technique making it a possibility- cavity optomechanics, particularly optomechanical cooling. We investigate the limits of optomechanical cooling and review how the coupling of mechanical oscillators to external heat baths limits the minimum attainable phonon occupation number. As a possible alternative for circumventing clamping losses, we consider an all-optical approach where the mechanical element (in this case, a Bragg mirror) is suspended via optical forces, and discuss some limitations of this approach. We explore several schemes aimed at the generation of quantum states in mechanical oscillators. We consider specifically two examples: one in which the mechanical oscillator is coupled to polar molecules via dipole-dipole interaction, and another where it is magnetically coupled to a Bose condensate. The first example emphasizes that such an interaction can generate parametric squeezing and entanglement. The second scheme demonstrates that the back action of BEC spin measurements can be used to generate quantum states of motion of a mechanical oscillator. We then discuss possible methods for measuring the entire density matrix of a mechanical oscillator. The first method achieves the tomographic reconstruction of the mechanical Wigner function by coupling it simultaneously to a classical optical oscillator and a qubit. The second approach involves a state transfer scheme between momentum excitations of a bose-condensate in a cavity and a moving mirror of the cavity that is entirely mediated by the light field. We conclude with a discussion of the broader implications of this work, and some future research directions.