Quantum opto-mechanics is a fast moving, broad research field which aims to investigate and control the interaction of light and the quantized motion of mechanical objects and the coupling between them. This allows one to engineer the mechanical quantum state by controlling and measuring the electromagnetic field, and conversely, to control the dynamical evolution of the optical field via its interaction with a mechanical system. Mechanical resonators are accessible in many different shapes and sizes, from kilogram scales in experiments that test gravitational theories to micro- and nano-scales in resolved sideband regime, where the frequency of the mechanical resonator is larger than the bandwidth of the optical cavity. In this regime, it is possible to cool the mechanical object to the ground state which allows a high degree of control and the ability to prepare interesting non-classical states, states that could aid in investigating the quantum dynamics of macroscopic objects. The field of quantum opto-mechanics is a promising testbed for quantum control technologies, such as fundamental tests of quantum mechanics, ultra-sensitive quantum sensors for precise measurements, phonon lasing, mechanical memories with long lifetime and quantum information processing. Furthermore, experiments are progressing toward strong opto-mechanical coupling regimes with single photons. This creates a platform that can take advantage of the nonlinear optical interactions to generate highly non-classical states in such light-matter interfaces. Photonic systems working in the single photon regime will be promising for low power applications and also for implementations of quantum information and computation. Motivated by these applications, this thesis consists of theoretical studies in the context of single photonics. This includes investigating non-classical mechanical state generation and mechanically controlling the dynamical evolution of optical fields in the strong coupling regime single photon opto-mechanics and furthermore, proposing a quantum sensor using single photonics. In this regard, we employ three important formalisms to treat and measure open quantum systems with non-Gaussian input fields: the conditional and unconditional cascaded master equations, Fock-state master equations and input-output Langevin equations. In the context of opto-mechanics, the system to be investigated is composed of two optical cavities with a coupling modulated via a mechanical resonator. In one case, a sequence of single photons are irreversibly sent to one of the optical cavities. After photons go through the opto-mechanical interaction, photon counting measurements are performed on the cavity output, conditionally steering the mechanical state to a highly non-classical Fock state. Numerical calculations are performed to predict the experimental parameters needed to generate a mechanical Fock state before the mechanical object is thermalized. In another case, the same opto-mechanical scheme is employed to conversely modify the state of the optical mode by engineering the state of the mechanical degree of freedom. In this case, it is shown that the opto-mechanical system operates as an effective beam splitter for the input single photons, with a transmission that can be controlled by tuning the number of excitations in the bulk mechanical resonator. When the mechanical resonator has a small coherent amplitude it acts as a quantum control, entangling the optical and mechanical degrees of freedom. As the coherent amplitude of the resonator increases, it acts as a classical control for the input photons. Finally, we propose a novel multi-purpose sensor architecture that can be used for force, refractive index and possibly local temperature detection. In this scheme, two coupled cavities behave as an effective beam splitter. This sensor is based on fourth order interference (the Hong-Ou-Mandel effect) and requires a sequence of single photon pulses and consequently has low pulse power. Changes in the parameter to be measured induce variations in the effective beam splitter reflectivity and result in changes to the visibility of interference. We propose that this generic scheme could be implemented with coupled L3 photonic crystal cavities and find that this system, which only relies on photon coincidence detection and does not need any spectral resolution, can estimate forces as small as 10-7 Newtons and can measure one part per million change in refractive index using a very low input power of 10-10 W.
Quantum opto-mechanics is a fast moving, broad research field which aims to investigate and control the interaction of light and the quantized motion of mechanical objects and the coupling between them. This allows one to engineer the mechanical quantum state by controlling and measuring the electromagnetic field, and conversely, to control the dynamical evolution of the optical field via its interaction with a mechanical system. Mechanical resonators are accessible in many different shapes and sizes, from kilogram scales in experiments that test gravitational theories to micro- and nano-scales in resolved sideband regime, where the frequency of the mechanical resonator is larger than the bandwidth of the optical cavity. In this regime, it is possible to cool the mechanical object to the ground state which allows a high degree of control and the ability to prepare interesting non-classical states, states that could aid in investigating the quantum dynamics of macroscopic objects. The field of quantum opto-mechanics is a promising testbed for quantum control technologies, such as fundamental tests of quantum mechanics, ultra-sensitive quantum sensors for precise measurements, phonon lasing, mechanical memories with long lifetime and quantum information processing. Furthermore, experiments are progressing toward strong opto-mechanical coupling regimes with single photons. This creates a platform that can take advantage of the nonlinear optical interactions to generate highly non-classical states in such light-matter interfaces. Photonic systems working in the single photon regime will be promising for low power applications and also for implementations of quantum information and computation. Motivated by these applications, this thesis consists of theoretical studies in the context of single photonics. This includes investigating non-classical mechanical state generation and mechanically controlling the dynamical evolution of optical fields in the strong coupling regime single photon opto-mechanics and furthermore, proposing a quantum sensor using single photonics. In this regard, we employ three important formalisms to treat and measure open quantum systems with non-Gaussian input fields: the conditional and unconditional cascaded master equations, Fock-state master equations and input-output Langevin equations. In the context of opto-mechanics, the system to be investigated is composed of two optical cavities with a coupling modulated via a mechanical resonator. In one case, a sequence of single photons are irreversibly sent to one of the optical cavities. After photons go through the opto-mechanical interaction, photon counting measurements are performed on the cavity output, conditionally steering the mechanical state to a highly non-classical Fock state. Numerical calculations are performed to predict the experimental parameters needed to generate a mechanical Fock state before the mechanical object is thermalized. In another case, the same opto-mechanical scheme is employed to conversely modify the state of the optical mode by engineering the state of the mechanical degree of freedom. In this case, it is shown that the opto-mechanical system operates as an effective beam splitter for the input single photons, with a transmission that can be controlled by tuning the number of excitations in the bulk mechanical resonator. When the mechanical resonator has a small coherent amplitude it acts as a quantum control, entangling the optical and mechanical degrees of freedom. As the coherent amplitude of the resonator increases, it acts as a classical control for the input photons. Finally, we propose a novel multi-purpose sensor architecture that can be used for force, refractive index and possibly local temperature detection. In this scheme, two coupled cavities behave as an effective beam splitter. This sensor is based on fourth order interference (the Hong-Ou-Mandel effect) and requires a sequence of single photon pulses and consequently has low pulse power. Changes in the parameter to be measured induce variations in the effective beam splitter reflectivity and result in changes to the visibility of interference. We propose that this generic scheme could be implemented with coupled L3 photonic crystal cavities and find that this system, which only relies on photon coincidence detection and does not need any spectral resolution, can estimate forces as small as 10-7 Newtons and can measure one part per million change in refractive index using a very low input power of 10-10 W.
The toolbox of quantum optics allows to achieve coherent quantum control over massive mechanical resonators by using radiation pressure of light inside optical cavities. Only recently, cavity-assisted ground state cooling of mechanical motion has been achieved both in the micro- and in the nanomechanical domain [1, 2]. Together with the strong coupling regime [3], this opens up a new parameter regime for macroscopic quantum physics with respect to size and mass of the objects under investigation. I will discuss the prospects of generating macroscopic quantum superposition states [4] and quantum entanglement [5], both for micromechanical interfaces for quantum information processing and for new tests of the foundations of quantum physics.
The toolbox of quantum optics allows to achieve coherent quantum control over massive mechanical resonators by using radiation pressure of light inside optical cavities. Only recently, cavity-assisted ground state cooling of mechanical motion has been achieved both in the micro- and in the nanomechanical domain [1, 2]. Together with the strong coupling regime [3], this opens up a new parameter regime for macroscopic quantum physics with respect to size and mass of the objects under investigation. I will discuss the prospects of generating macroscopic quantum superposition states [4] and quantum entanglement [5], both for micromechanical interfaces for quantum information processing and for new tests of the foundations of quantum physics.
Non-relativistic quantum mechanics have proven to be a significant framework to understand the non-classical behaviour of light and the microcosmos. Perhaps, one of the first technological revolutions within quantum theory came with the invention of the transistor, whereby a purely quantum mechanical description was required. Currently, another outstanding revolution is taking place in a crossroad where information science meets quantum mechanics (this being the quantum information field). Such an area of work contemplates both the fascinating theoretical aspect of quantum correlations, as well as implementations towards quantum tasks performed by a universal quantum computer; tasks that cannot be realised (or they are hard to implement) within the classical domain. This Thesis is devoted to study the dynamics of quantum entanglement in spin-optomechanics systems. In particular, we explore the quantum stabilization of quantum entanglement, a quantum concentration scheme in opto-mechanics and an interfacing of matter and light towards quantum networking applications. Additionally, we also investigate theoretical aspects of quantum correlations within thermal environments, as well as the topical area of quantum sudden transitions. In Chapter 1, we provide a brief summary of quantum information and of the quantum optics framework to cover elementary concepts and techniques used subsequently in this work. Subsequently, in Chapter 2 we present the stabilization of quantum entanglement in a non-linear qubit-oscillator system. The inclusion of a modest nonlinearity gives three results, i) the loss of periodicity of the system, ii) the occurrence of quadrature squeezing appearing for a short time, and iii) the quantum entanglement reaches higher values in contrast to the case without non-linearity. In Chapter 3, a technique to concentrate/distill a two-mode vacuum state in optomechanics via unsharp measurements is presented. Here, one of the optical modes is injected into a cavity at first, and thereafter, it is nonlinearly coupled to a mechanical oscillator. Afterwards, the position of the oscillator is measured using pulsed optomechanics and homodyne detection. The results show that this measurement can conditionally increase the initial entanglement. Next, in Chapter 4, stimulated by optomechanical transducers and quantum networking, a light-matter system is constructed where a qubit is coupled to a cavity mode mediated through a mechanical oscillator. The qubit-oscillator conditionally displaced Hamiltonian and the oscillator-cavity radiation-pressure interaction generate a maximal qubit-cavity entanglement. Additionally, we consider the case in which the cavity mode is coupled to a waveguide, numerical calculations show a promising qubit-fibre entanglement under a weak matter-light coupling. For the quantum network case, we coupled a generic qubit in the first node to a second qubit-cavity distant Jaynes-Cummings system coupled through an optical fibre, where qubit-qubit correlations can be achieved in the quantum open systems scenario. In Chapter 5, we study the evolution of an open quantum system within the Born-Markov microscopic master equation (MME). Essentially, two distant two-level atoms are trapped in fibre-coupled cavities. Under the approximation of one-excitation allowed in the atom-cavity-fibre basis, we can obtain quantum correlations induced by thermal fluctuations from the environments. Lastly, in Chapter 6, we bring together previously elements explored in this Thesis. The system is a hybrid atomic-mechanical system formed from two remote qubits interacting with individual harmonic oscillators. This system, as in Chapter 4, explores interesting applications in quantum networking schemes. The two qubits are initially prepared in a Bell-diagonal state, and consequently the two-qubit correlations exhibit few interesting effects such as freezing, sudden changes and revivals in the evolution of the quantum entropic discord. To conclude, I summarize my findings in Chapter 7.
In a nutshell, a cavity optomechanical system consists of a mechanical oscillator inside an optical cavity. Cavity optomechanics studies the interplay between the light-matter radiation-pressure interaction and the change in the cavity frequency induced by mechanical motion. By leveraging the tools of quantum optics and quantum measurement, cavity quantum optomechanics enables the engineering of nonclassical quantum states of bulk matter. In this thesis, I present protocols for engineering such nonclassical quantum states in Part II. First, I introduce a scheme to ‘grow’ a quantum kitten state of a mechanical oscillator into a macroscopic Schrödinger cat state using a series of nonlinear pulsed optomechanical interactions. Next, I detail our proposed schemes to generate and verify entanglement between two mechanical oscillators. Moving on from pulsed optomechanics, I describe the theory behind an experiment that achieved multi-phonon subtraction from a mechanical oscillator in a continuously driven Brillouin optomechanical system. In the final chapter of Part II, I provide a theoretical preview of an experiment that investigates the behaviour of the mechanical oscillator when no light is detected at the output. In Part III, I introduce a new framework for nonlinear cavity quantum optomechanics that incorporates the intrinsic nonlinearity of the radiation-pressure interaction, the nonlinearity from the cavity enhancement, and higher-order mechanical position terms in the expansion of the cavity frequency. I then propose a scheme for measuring mechanical position using general-dyne detection, applicable to pulsed and continuous measurements. This predicts a new regime of operation, the “stochastic Gaussian” regime. Finally, I discuss a protocol for deterministic mechanical squeezing that utilizes the cavity response.
The coupling of nanomechanical resonators to controllable quantum systems represents a growing and promising area of research. Recent advances in this field have brought to astonishing results, such as the initialization of a mechanical resonator into its quantum ground state and even the preparation of non-classical coherent states of motion. These achievements open up appealing scenarios to quantum information technologies and to the exploration of the quantum-classical boundary. From an application perspective, such quantum-mechanical hybrid systems provide a versatile and attractive tool for a variety of precision measurements, like ultra-sensitive detection of force, mass, and displacement. \n \nQuantum control over a mechanical resonator, or, conversely, the prospect of using resonator's motion for probing quantum states, both involve some tight requirements. First of all, the interaction between the mechanics and its quantum partner has to be large on the scale of the decoherence rates of the coupled systems. In most cases, the coupling mechanism has to be activated by engineering the resonator with electrodes, magnets, or mirrors, or by using tailored laser fields. For this reason, the search for a strong coupling typically competes with the requirement of overcoming decoherence effects. In addition, for quantum effects to be observable, strong coupling has to be accompanied by the preparation of zero entropy initial states, for instance by cooling the resonator into its ground state of motion. \n \nThe motivation pursued by this thesis is to contribute to the inspiring field of hybrid systems by walking through each of the aforementioned directions. We in fact demonstrate a promising system in which optically active quantum dots, embedded in fully self-assembled core-shell nanowires, are coupled to the nanowire motion. Mechanical vibrations of the nanowire modulate the quantum dot emission energy over a broad range exceeding 14 meV, by means of deformation potential coupling. In our system, therefore, both the coupling mechanism and the quantum states themselves are intrinsic to the resonator's structure. Besides revealing unusually strong, such a built-in opto-mechanical interaction produces a hybrid system whose inherent coherence is unspoiled by any functionalization or external field and whose fabrication is simpler than top-down techniques. \n \nWe further demonstrate the use of a quantum point contact as a displacement transducer to measure and control the low-temperature thermal motion of a nearby micromechanical cantilever. We show that by including the QPC in a suitable feedback loop, we are able to cool the cantilever's fundamental mechanical mode down to the level of the measurement noise, achieving a squashing of the QPC noise at high gain. Due to its off-board design, our system is particularly versatile and suitable to force-sensing applications. Since the QPC transducer is sensitive to local modifications of the nearby electric field, our approach is in principle compatible with any nanoscale resonator, without requiring any functionalization to activate the coupling. By improving the performance of the QPC as a one-dimensional conductor and the cantilever-QPC capacitive coupling, our system has the potential to achieve quantum-limited displacement resolution and ground state cooling. We then report on some ongoing attempts to overcome the current limitations of our system and couple mechanical motion to different mesoscopic transport devices. \n \nWe remark that our demonstration of an as-grown quantum-dot-in-nanowire hybrid system opens up bright prospects on future experiments, as also testified by the very recent ferment of the scientific community around this topic. We find that the opto-mechanical coupling rate is not far from the nanowire mechanical frequency. This fact makes our system particularly promising for the quantum non-demolition readout of a quantum dot state through a measurement of the nanowire position. On the other hand, we show that the coupling can be further optimized, and the nanowire mechanical heating rate reduced, thus disclosing the captivating perspective of using quantum dots to probe and control the mechanical state of a nanowire. In this context, it would be important to investigate a possible spin-oscillator coupling in our system, given the long coherence time offered by a spin state in a quantum dot. The wide range of control over the quantum dots emission energy and the ability to tune two neighboring dots into resonance pave the way to mechanically induced emitter-emitter coupling. In addition, our monolithic opto-mechanical system constitutes a good candidate for recent proposals of a tripartite hybrid system, which would integrate an optical cavity, a quantum two-level system and a mechanical resonator. The intrinsically strong coupling between the quantum dots and the nanowire motion would enhance the interaction between the mechanics and the cavity field, leading for instance to efficient cooling of the resonator to the ground state. Finally, the quantum dot sensitivity to the nanowire resonant vibration could also support the use of our system as an integrated force probe or as a nanomechanical mass sensor. In other words, the results reported in this dissertation constitute not only a relevant proof-of-principle, moreover they open up intriguing challenges for future research.
The interaction of a single atom with the light field inside a Fabry-Pérot microcavity in the strong-coupling regime is now an experimentally realizable example of a continuously measured open quantum system. This thesis investigates the motion of an atom due to the interaction with the cavity light field, the possibility of determining the state of the such a system given a series of measurement results and schemes for feedback control of the dynamics which make use of the resulting state estimates. A semiclassical model of atomic motion in an optical cavity is derived and the dependence of the forces on the different parameters is described. A major obstacle to trapping atoms inside the cavity field is that the fluctuations of these forces are typically very much larger than in free space. A quantum mechanical treatment of the atomic motion is also given and it is shown that the motional state of the atom can be highly non-classical. Detection of the phase shift of the light caused by the atom constitutes a high precision measurement of the atomic position and this motivates an investigation of the quantum limits to state estimation under continuous position measurement that accounts for uncertainty about the initial state and the presence of environmental noise or detection inefficiency. Quantum trajectory theory is used to show that after a sufficient period of observation the state of the system is uniquely determined by the measurement results. It is proposed that this state estimate be used to manipulate the system as in techniques of classical control such as dynamic programming. This significantly broadens the range of available quantum mechanical feedback strategies. Finally, a major reason for interest in strong-coupling cavity quantum electrodynamics is the possible application to the developing field of quantum information processing. The limitations imposed by atomic motion on the realization of several quantum computing and communication schemes are investigated. It is shown that schemes which are not critically dependent on the length of the interaction, for example those which employ adiabatic passage, are more robust when atomic motion is considered.