Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Kalte Ionenkristalle in einer segmentierten Paul-Falle

T. Deuschle

Published Jan 1, 2007• 0 citations
Publisher

Abstract

Laser-cooled ions in linear Paul Traps are one of the most promising candidates for a quantum computer. This thesis reports on the construction and operation of a segmented Paul trap. The trap was fabricated in UHV-compatible printed-circuit-board (PCB) technology and consists of 15 segments with a minimum segment width of 0,5 mm. With the large number of segments it is unique in Europe. Although a PCB-trap may not be suitable for large-scale quantum computers, the advantage of such a trap is fast and reliable fabrication with low fabrication costs. Therefore this technology is ideal for rapid testing of new trap geometries and ion shuttling methods. Experiments were carried out with individual laser-cooled 40Ca+ ions stored in the trap and observed by detecting their fluorescence. Measured trap frequencies agree to numerical simulations at the level of a few percent, demonstrating the fabrication accuracy of the segmented trap. Compensation voltages are used to cancel stray fields. The long time stability of these compensation voltages over many months is comparable to a conventional unsegmented trap. To determine the short time stability of the PCB-trap, the heating rate of the motional mode of an ion was measured by detecting fluoresence during Doppler cooling of heated ions. The observed heating rate was much higher than expected due to a massive deposition of calcium on the trap electrodes. Transport dynamics of a single trapped ion was investigated by shuttling the ion between trap locations 2mm apart. A non-adiabatic transport in roughly two oscillation periods in the axial trap potential was achieved. The quality of a transport function was evaluated with two different methods: the success probability and the excess energy of the ion after transport. The measurements were compared with numerical simulations of the classical energy transfer due to the transport. Finally, a string of ions held in a common trap was separated into two distinct traps.

DOI
10.18725/oparu-1115

Related papers

Transport of ions in a segmented linear Paul trap in printed-circuit-board technology

G Huber, T. Deuschle, Wolfgang Schnitzler +3 more

We describe the construction and operation of a segmented linear Paul trap, fabricated in printed-circuit-board technology with an electrode segment width of 500 μm. We prove the applicability of this technology to reliable ion trapping and report the observation of Doppler-cooled ion crystals of 40 Ca + with this kind of trap. Measured trap frequencies agree with numerical simulations at the level of a few percent from which we infer a high fabrication accuracy of the segmented trap. To demonstrate its usefulness and versatility for trapped ion experiments we study the fast transport of a single ion. Our experimental results show a success rate of 99.0(1)% for a transport distance of 2 × 2 mm in a round-trip time of T = 20 μs, which corresponds to 4 axial oscillations only. We theoretically and experimentally investigate the excitation of oscillations caused by fast ion transports with error-function voltage ramps: for a slightly slower transport (a round-trip shuttle within T = 30 μs) we observe non-adiabatic motional excitation of 0.89(15) meV.

arXiv:0711.2947•New Journal of Physics•Jan 14, 2008•73 citations

Implementing segmented ion trap designs for quantum computing

Gergely Imreh

With all the key elements of quantum computing in ion traps demonstrated by the research community, the focus is now placed on building more sophisticated traps with larger numbers of ions to allow practical scale information processing. One promising avenue is to store ions in and shuttle them between many independent traps which serve as potential interaction sites. The core of the work described in this thesis is the experimental evaluation of a microfabricated segmented ion trap, built by Sandia National Laboratories ("Sandia trap"). These experiments required construction of a wholly new optical setup including laser and detection systems, a vacuum system and control electronics. Among our experimental achievements were: successful loading of single and pairs of ions in the microscale trap, measurement of ion storage lifetime, measurement of the motional heating rate with a time-resolved Doppler-cooling method — which showed above than average heating, and implemented a single-ion shuttling method — which reliably transferred the ion through a distance of 360 μm (two DC electrode widths away) and back. These results have been used to improve the next version of the Sandia trap design. We also used computer modelling to study several aspects of ion traps: a mesoscopic ion trap designed for fast ion separation, simulated ion loading to quantify requirements for successful trapping in small and shallow traps, and analyzed a precise shuttling method — where the time dependence of the trapping potential is engineered such that there is minimal motional heating. The results show that ion trap arrays at the 100 μm distance scale are feasible and suggests that such multiple trap designs merit further study.

•Jan 1, 2008•5 citations

Optimization of segmented linear Paul traps and transport of stored particles

S. Schulz, Ulrich Poschinger, Kilian Singer +1 more

Abstract Single ions held in linear Paul traps are promising candidates for a future quantum computer. Here, we discuss a two‐layer microstructured segmented linear ion trap. The radial and axial potentials are obtained from numeric field simulations and the geometry of the trap is optimized. As the trap electrodes are segmented in the axial direction, the trap allows the transport of ions between different spatial regions. Starting with realistic numerically obtained axial potentials, we optimize the transport of an ion such that the motional degrees of freedom are not excited, even though the transport speed far exceeds the adiabatic regime. In our optimization we achieve a transport within roughly two oscillation periods in the axial trap potential compared to typical adiabatic transports that take of the order 102 oscillations. Furthermore heating due to quantum mechanical effects is estimated and suppression strategies are proposed.

arXiv:quant-ph/0607217•Fortschritte der Physik•Aug 1, 2006•74 citations

Sideband cooling and coherent dynamics in a microchip multi-segmented ion trap

Stephan A Schulz, Ulrich Poschinger, Frank Ziesel +1 more

Miniaturized ion trap arrays with many trap segments present a promising architecture for scalable quantum information processing. The miniaturization of segmented linear Paul traps allows partitioning the microtrap into different storage and processing zones. The individual position control of many ions—each of them carrying qubit information in its long-lived electronic levels—by the external trap control voltages is important for the implementation of next generation large-scale quantum algorithms. We present a novel scalable microchip multi-segmented ion trap with two different adjacent zones, one for the storage and another dedicated to the processing of quantum information using single ions and linear ion crystals. A pair of radio-frequency-driven electrodes and 62 independently controlled dc electrodes allows shuttling of single ions or linear ion crystals with numerically designed axial potentials at axial and radial trap frequencies of a few megahertz. We characterize and optimize the microtrap using sideband spectroscopy on the narrow S 1/2 ↔D 5/2 qubit transition of the 40 Ca + ion, and demonstrate coherent single-qubit Rabi rotations and optical cooling methods. We determine the heating rate using sideband cooling measurements to the vibrational ground state, which is necessary for subsequent two-qubit quantum logic operations. The applicability for scalable quantum information processing is proved.

arXiv:0712.3249•New Journal of Physics•Apr 30, 2008•95 citations

Quantum State Manipulation and Dynamics in Micro Ion Traps

Frank Ziesel

The outstanding degree of control over trapped ions in Paul traps gives rise to the development of novel quantum manipulation techniques. Optical transitions can be used for precise manipulation of internal and external states. This way, non-classical states can be created which are a key component of quantum algorithms based on quantum logic operations. This powerful optical toolbox enabled the trapped ion system to assume leadership in the field of quantum computation. This thesis addresses two major challenges in the field of micro ion trap quantum optics. The temperature dependence of the heating rate from the ion trap surface is analysed in a novel cryogenic micro ion trap. Furthermore segmented traps allow state manipulations by time dependent electrical potentials, generated by the control voltages. These electrical fields provide a fast and reliable control handle to the ions external degrees of freedom. Quantum computation in Paul trap arrays is based on a combination of ion crystal transport, splitting and merging operations, while laser driven quantum state manipulations are mainly carried out on small ion crystals. Within this thesis a basic building block was realised by performing transport operations with a single ground-state cooled ion. As a highlight of experimental achievements, shuttling in the non-adiabatic regime, on the timescale of the motional period was demonstrated with low residual energy transfer. For his endeavour a specialised low noise arbitrary function generator was designed and manufactured during this thesis. Arbitrary voltage ramps at a sampling rate of up to 2.5 MS/s on up to 12 channels allow the study of a novel excitation method by directly manipulating the ion using electrical forces. Accurate numerical simulations in combination with the fast high resolution voltage supply allow deterministic quantum manipulations via momentum kicks. I report the first experimental demonstration of displaced number states with trapped ions.

•Jan 1, 2012•0 citations

Yb+ ion trapping and optimum planar trap geometries for scalable quantum technology

Altaf Hussain Nizamani

Trapped ions in linear Paul traps are largely isolated from interaction with the environment. This property of trapped ions make them a primary choice for quantum technology. \nOver the last decade, trapped atomic ions in linear radio frequency Paul traps have shown to be an important tool to implement quantum algorithms. The scalability of linear ion \ntraps is required to handle large numbers of qubits, in order to implement useful quantum computation. Advance micro-fabrication technology allows the realisation of scalable ion traps. Further developments of micro-trap designs, for the purpose of scalable quantum technology, requires inter-disciplinary investigations of ion traps. Micro-scale ion trap designs typically require a versatile experimental setup. The first part of this thesis describes such an experimental setup including a chip bracket that can host macroscopic ion traps as well as advanced symmetric and asymmetric ion trap chips with up to 90 control electrodes. The system provides versatile optical access for both type of traps and the vacuum chamber is designed in a way so the ion traps can be replaced within a short amount of time. To test the working of the setup, a macroscopic ion trap with an ion-electrode distance of 310±10 μm is used to trap ytterbium ions (Yb+). The trap is characterised by measuring the heating rate, (n•), and spectral noise density SE(ω). A \nphotoionisation technique is used to ionise the different isotopes of Yb in our trap. Isotope selective photoionisation requires exact measurements of 1So↔1P1 transition for the different Yb isotopes. A technique to measure these resonant frequencies is described. \nThis technique works by observing and aligning fluorescence spots and by using this technique, the 1So↔1P1 transition frequencies for stable isotopes of Yb were measured with an accuracy of 60 MHz. These new measured transition frequencies for stable Yb isotopes differ from previously published work by 660 MHz. Furthermore, this technique can also be used to obtain the transition frequencies at different laser-atomic beam angles, typical for non-perpendicular laser-atomic beam angles. The second part of this thesis discusses the optimisation of surface trap geometries as they are being used to implement scalable ion trap designs which consist of a large number of trapping zones. The trap depth in surface traps is low compared to symmetric traps of similar dimensions. How to optimise the trap geometry to achieve maximum trap depth for a given ion height above the trap electrodes, is discussed. Fast and adiabatic ion shuttling operations in one dimension as well as ion separation and recombination processes are important for many quantum information implementations. The maximum speed of separation of trapped ions for adiabatic shuttling operations depends on the secular frequencies, the trapped ion experiences in the process. It will be shown how such ion trap structures have to be designed for fast ion separation process and linear shuttling. Numerical results of adiabatic shuttling operations for trapped ions in such trap structures are also presented.

•Aug 6, 2011•1 citation
Laser-cooled ions in linear Paul Traps are one of the most promising candidates for a quantum computer. This thesis reports on the construction and operation of a segmented Paul trap. The trap was fabricated in UHV-compatible printed-circuit-board (PCB) technology and consists of 15 segments with a minimum segment width of 0,5 mm. With the large number of segments it is unique in Europe. Although a PCB-trap may not be suitable for large-scale quantum computers, the advantage of such a trap is fast and reliable fabrication with low fabrication costs. Therefore this technology is ideal for rapid testing of new trap geometries and ion shuttling methods. Experiments were carried out with individual laser-cooled 40Ca+ ions stored in the trap and observed by detecting their fluorescence. Measured trap frequencies agree to numerical simulations at the level of a few percent, demonstrating the fabrication accuracy of the segmented trap. Compensation voltages are used to cancel stray fields. The long time stability of these compensation voltages over many months is comparable to a conventional unsegmented trap. To determine the short time stability of the PCB-trap, the heating rate of the motional mode of an ion was measured by detecting fluoresence during Doppler cooling of heated ions. The observed heating rate was much higher than expected due to a massive deposition of calcium on the trap electrodes. Transport dynamics of a single trapped ion was investigated by shuttling the ion between trap locations 2mm apart. A non-adiabatic transport in roughly two oscillation periods in the axial trap potential was achieved. The quality of a transport function was evaluated with two different methods: the success probability and the excess energy of the ion after transport. The measurements were compared with numerical simulations of the classical energy transfer due to the transport. Finally, a string of ions held in a common trap was separated into two distinct traps.
We describe the construction and operation of a segmented linear Paul trap, fabricated in printed-circuit-board technology with an electrode segment width of 500 μm. We prove the applicability of this technology to reliable ion trapping and report the observation of Doppler-cooled ion crystals of 40 Ca + with this kind of trap. Measured trap frequencies agree with numerical simulations at the level of a few percent from which we infer a high fabrication accuracy of the segmented trap. To demonstrate its usefulness and versatility for trapped ion experiments we study the fast transport of a single ion. Our experimental results show a success rate of 99.0(1)% for a transport distance of 2 × 2 mm in a round-trip time of T = 20 μs, which corresponds to 4 axial oscillations only. We theoretically and experimentally investigate the excitation of oscillations caused by fast ion transports with error-function voltage ramps: for a slightly slower transport (a round-trip shuttle within T = 30 μs) we observe non-adiabatic motional excitation of 0.89(15) meV.
With all the key elements of quantum computing in ion traps demonstrated by the research community, the focus is now placed on building more sophisticated traps with larger numbers of ions to allow practical scale information processing. One promising avenue is to store ions in and shuttle them between many independent traps which serve as potential interaction sites. The core of the work described in this thesis is the experimental evaluation of a microfabricated segmented ion trap, built by Sandia National Laboratories ("Sandia trap"). These experiments required construction of a wholly new optical setup including laser and detection systems, a vacuum system and control electronics. Among our experimental achievements were: successful loading of single and pairs of ions in the microscale trap, measurement of ion storage lifetime, measurement of the motional heating rate with a time-resolved Doppler-cooling method — which showed above than average heating, and implemented a single-ion shuttling method — which reliably transferred the ion through a distance of 360 μm (two DC electrode widths away) and back. These results have been used to improve the next version of the Sandia trap design. We also used computer modelling to study several aspects of ion traps: a mesoscopic ion trap designed for fast ion separation, simulated ion loading to quantify requirements for successful trapping in small and shallow traps, and analyzed a precise shuttling method — where the time dependence of the trapping potential is engineered such that there is minimal motional heating. The results show that ion trap arrays at the 100 μm distance scale are feasible and suggests that such multiple trap designs merit further study.
Abstract Single ions held in linear Paul traps are promising candidates for a future quantum computer. Here, we discuss a two‐layer microstructured segmented linear ion trap. The radial and axial potentials are obtained from numeric field simulations and the geometry of the trap is optimized. As the trap electrodes are segmented in the axial direction, the trap allows the transport of ions between different spatial regions. Starting with realistic numerically obtained axial potentials, we optimize the transport of an ion such that the motional degrees of freedom are not excited, even though the transport speed far exceeds the adiabatic regime. In our optimization we achieve a transport within roughly two oscillation periods in the axial trap potential compared to typical adiabatic transports that take of the order 102 oscillations. Furthermore heating due to quantum mechanical effects is estimated and suppression strategies are proposed.
Miniaturized ion trap arrays with many trap segments present a promising architecture for scalable quantum information processing. The miniaturization of segmented linear Paul traps allows partitioning the microtrap into different storage and processing zones. The individual position control of many ions—each of them carrying qubit information in its long-lived electronic levels—by the external trap control voltages is important for the implementation of next generation large-scale quantum algorithms. We present a novel scalable microchip multi-segmented ion trap with two different adjacent zones, one for the storage and another dedicated to the processing of quantum information using single ions and linear ion crystals. A pair of radio-frequency-driven electrodes and 62 independently controlled dc electrodes allows shuttling of single ions or linear ion crystals with numerically designed axial potentials at axial and radial trap frequencies of a few megahertz. We characterize and optimize the microtrap using sideband spectroscopy on the narrow S 1/2 ↔D 5/2 qubit transition of the 40 Ca + ion, and demonstrate coherent single-qubit Rabi rotations and optical cooling methods. We determine the heating rate using sideband cooling measurements to the vibrational ground state, which is necessary for subsequent two-qubit quantum logic operations. The applicability for scalable quantum information processing is proved.
The outstanding degree of control over trapped ions in Paul traps gives rise to the development of novel quantum manipulation techniques. Optical transitions can be used for precise manipulation of internal and external states. This way, non-classical states can be created which are a key component of quantum algorithms based on quantum logic operations. This powerful optical toolbox enabled the trapped ion system to assume leadership in the field of quantum computation. This thesis addresses two major challenges in the field of micro ion trap quantum optics. The temperature dependence of the heating rate from the ion trap surface is analysed in a novel cryogenic micro ion trap. Furthermore segmented traps allow state manipulations by time dependent electrical potentials, generated by the control voltages. These electrical fields provide a fast and reliable control handle to the ions external degrees of freedom. Quantum computation in Paul trap arrays is based on a combination of ion crystal transport, splitting and merging operations, while laser driven quantum state manipulations are mainly carried out on small ion crystals. Within this thesis a basic building block was realised by performing transport operations with a single ground-state cooled ion. As a highlight of experimental achievements, shuttling in the non-adiabatic regime, on the timescale of the motional period was demonstrated with low residual energy transfer. For his endeavour a specialised low noise arbitrary function generator was designed and manufactured during this thesis. Arbitrary voltage ramps at a sampling rate of up to 2.5 MS/s on up to 12 channels allow the study of a novel excitation method by directly manipulating the ion using electrical forces. Accurate numerical simulations in combination with the fast high resolution voltage supply allow deterministic quantum manipulations via momentum kicks. I report the first experimental demonstration of displaced number states with trapped ions.
Trapped ions in linear Paul traps are largely isolated from interaction with the environment. This property of trapped ions make them a primary choice for quantum technology. \nOver the last decade, trapped atomic ions in linear radio frequency Paul traps have shown to be an important tool to implement quantum algorithms. The scalability of linear ion \ntraps is required to handle large numbers of qubits, in order to implement useful quantum computation. Advance micro-fabrication technology allows the realisation of scalable ion traps. Further developments of micro-trap designs, for the purpose of scalable quantum technology, requires inter-disciplinary investigations of ion traps. Micro-scale ion trap designs typically require a versatile experimental setup. The first part of this thesis describes such an experimental setup including a chip bracket that can host macroscopic ion traps as well as advanced symmetric and asymmetric ion trap chips with up to 90 control electrodes. The system provides versatile optical access for both type of traps and the vacuum chamber is designed in a way so the ion traps can be replaced within a short amount of time. To test the working of the setup, a macroscopic ion trap with an ion-electrode distance of 310±10 μm is used to trap ytterbium ions (Yb+). The trap is characterised by measuring the heating rate, (n•), and spectral noise density SE(ω). A \nphotoionisation technique is used to ionise the different isotopes of Yb in our trap. Isotope selective photoionisation requires exact measurements of 1So↔1P1 transition for the different Yb isotopes. A technique to measure these resonant frequencies is described. \nThis technique works by observing and aligning fluorescence spots and by using this technique, the 1So↔1P1 transition frequencies for stable isotopes of Yb were measured with an accuracy of 60 MHz. These new measured transition frequencies for stable Yb isotopes differ from previously published work by 660 MHz. Furthermore, this technique can also be used to obtain the transition frequencies at different laser-atomic beam angles, typical for non-perpendicular laser-atomic beam angles. The second part of this thesis discusses the optimisation of surface trap geometries as they are being used to implement scalable ion trap designs which consist of a large number of trapping zones. The trap depth in surface traps is low compared to symmetric traps of similar dimensions. How to optimise the trap geometry to achieve maximum trap depth for a given ion height above the trap electrodes, is discussed. Fast and adiabatic ion shuttling operations in one dimension as well as ion separation and recombination processes are important for many quantum information implementations. The maximum speed of separation of trapped ions for adiabatic shuttling operations depends on the secular frequencies, the trapped ion experiences in the process. It will be shown how such ion trap structures have to be designed for fast ion separation process and linear shuttling. Numerical results of adiabatic shuttling operations for trapped ions in such trap structures are also presented.