Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Quantum State Manipulation and Dynamics in Micro Ion Traps

Frank Ziesel

Published Jan 1, 2012• 0 citations
Publisher

Abstract

The outstanding degree of control over trapped ions in Paul traps gives rise to the development of novel quantum manipulation techniques. Optical transitions can be used for precise manipulation of internal and external states. This way, non-classical states can be created which are a key component of quantum algorithms based on quantum logic operations. This powerful optical toolbox enabled the trapped ion system to assume leadership in the field of quantum computation. This thesis addresses two major challenges in the field of micro ion trap quantum optics. The temperature dependence of the heating rate from the ion trap surface is analysed in a novel cryogenic micro ion trap. Furthermore segmented traps allow state manipulations by time dependent electrical potentials, generated by the control voltages. These electrical fields provide a fast and reliable control handle to the ions external degrees of freedom. Quantum computation in Paul trap arrays is based on a combination of ion crystal transport, splitting and merging operations, while laser driven quantum state manipulations are mainly carried out on small ion crystals. Within this thesis a basic building block was realised by performing transport operations with a single ground-state cooled ion. As a highlight of experimental achievements, shuttling in the non-adiabatic regime, on the timescale of the motional period was demonstrated with low residual energy transfer. For his endeavour a specialised low noise arbitrary function generator was designed and manufactured during this thesis. Arbitrary voltage ramps at a sampling rate of up to 2.5 MS/s on up to 12 channels allow the study of a novel excitation method by directly manipulating the ion using electrical forces. Accurate numerical simulations in combination with the fast high resolution voltage supply allow deterministic quantum manipulations via momentum kicks. I report the first experimental demonstration of displaced number states with trapped ions.

DOI
10.18725/oparu-2605

Related papers

The development of microfabricated ion traps towards quantum information and simulation

Marcus Hughes

Trapped ions within Paul traps have shown to be a promising architecture in the realisation of a quantum information processor together with the ability of providing quantum simulations. Linear Paul traps have demonstrated long coherence times with ions being well isolated from the environment, single and multi-qubit gates and the high fidelity detection of states. The scalability to large number of qubits, incorporating all the previous achievements requires an array of linear ion traps. Microfabrication techniques allow for fabrication and micron level accuracy of the trap electrode dimensions through photolithography techniques. The first part of this thesis presents the experiential setup and trapping of Yb+ ions needed to test large ion trap arrays. This include vacuum systems that can host advanced symmetric and asymmetric ion traps with up to 90 static voltage control electrodes. Demonstration of a single trapped Yb+ ion within a two-layer macroscopic ion trap is presented. with an ion-electrode distance of 310(10) µm. The anomalous heating rate and spectral noise density of the trap was measured, a main form of decoherence within ion traps. The second half of this thesis presents the design and fabrication of multi-layer asymmetric ion traps. This allows for isolated electrodes that cannot be accessed via surface pathways, allowing for higher density of electrodes as well as creating novel trap designs that allow for the potential of quantum simulations to be demonstrated. These include two-dimensional lattices and ring trap designs in which the isolated electrodes provide more control in the ion position. For the microfabrication of these traps I present a novel high-aspect ratio electroplated electrode design that provides shielding of the dielectric layer. This provides a means to mitigate stray electric field due to charge build up on the dielectric surfaces. Electrical testing of the trap structures was performed to test bulk breakdown and surface flashover of the ion trap architectures. Results showed sufficient isolation between electrodes for both radio frequency and static breakdown. Surface flashover voltage measurements over the dielectric layer showed an improvement of more than double over previous results using a new fabrication technique. This will allow for more powerful ion trap chips needed for the next generation of microfabricated ion trap arrays for scalable quantum technologies.

•Jun 16, 2013•0 citations

Implementing segmented ion trap designs for quantum computing

Gergely Imreh

With all the key elements of quantum computing in ion traps demonstrated by the research community, the focus is now placed on building more sophisticated traps with larger numbers of ions to allow practical scale information processing. One promising avenue is to store ions in and shuttle them between many independent traps which serve as potential interaction sites. The core of the work described in this thesis is the experimental evaluation of a microfabricated segmented ion trap, built by Sandia National Laboratories ("Sandia trap"). These experiments required construction of a wholly new optical setup including laser and detection systems, a vacuum system and control electronics. Among our experimental achievements were: successful loading of single and pairs of ions in the microscale trap, measurement of ion storage lifetime, measurement of the motional heating rate with a time-resolved Doppler-cooling method — which showed above than average heating, and implemented a single-ion shuttling method — which reliably transferred the ion through a distance of 360 μm (two DC electrode widths away) and back. These results have been used to improve the next version of the Sandia trap design. We also used computer modelling to study several aspects of ion traps: a mesoscopic ion trap designed for fast ion separation, simulated ion loading to quantify requirements for successful trapping in small and shallow traps, and analyzed a precise shuttling method — where the time dependence of the trapping potential is engineered such that there is minimal motional heating. The results show that ion trap arrays at the 100 μm distance scale are feasible and suggests that such multiple trap designs merit further study.

•Jan 1, 2008•5 citations

Stabilization and control in a linear ion trap

J.-P. Stacey

This thesis describes experimental work towards developing a trapped ion quantum information processor. An existing ion trap apparatus was capable of trapping and laser-cooling single ions or small ion strings of 40 Ca+, and had been used for studies of quantum jumps and natural lifetime measurements in Ca. This thesis describes improvements in this apparatus, which have allowed the stability and the flexibility of experimental control of the ions to be greatly increased. This enabled experiments to read out the spin state of a single trapped ion, and to load ions with isotope selectivity through photoionization. The optical systems were improved by installation of new lasers, optical reference cavities, and a system of acousto-optic modulators for laser intensity switching and frequency control. The photon counting for fluorescence detection was improved, and a new photon time-of-arrival correlation circuit developed. This has permitted rapid and more sensitive detection of micromotion, and hence cancellation of stray fields in the trap. A study of resonant circuits in the low RF, high voltage (10 MHz, 1 kV) regime was carried out with a view to developing a new RF supply for the Paul trap with reduced noise and increased power. A new supply based on a helical resonator was built and used to trap ions. This technique has reduced noise and will permit higher secular frequencies to be attained in the future. A magnetic field B in the ion trap is used to define a quantization axis, and in one series of experiments was required to be of order 100 G to provide a substantial Zeeman splitting. A set of magnetic field coils to control the size and direction of B is described. The design of these posed some problems owing to an unforseen issue with the vacuum chamber. In short, it is magnetizable and acts to first approximation like a magnetic shield. The field coils had to be sufficiently substantial to produce the desired field at the ion even in the presence of this shielding effect, and dark resonance (and other) spectra with Zeeman splitting were obtained to calibrate the field using the ion as a probe. Finally, the thesis describes the successful loading of the ion trap by laser photoionization from a weak atomic beam. This involved two new lasers at 423 nm and 389 nm. Saturated absorption spectroscopy of neutral calcium is first described, then transverse excitation of an atomic beam in our vacuum chamber is used to identify all the main isotopes of calcium and confirm their abundances in our source (a heated sample of natural calcium). Finally, photoionization is used to load the trap. This has three advantages over electron-impact ionization. By avoiding an electron gun, we avoid charging of insulating patches and subsequent electric field drift as they discharge; the flux in the atomic beam and hence calcium (and other) deposits on the electrodes can be greatly reduced; and most importantly, the photoionization is isotope selective. Evidence is presented which suggests that even with an non-enriched source, the rare isotope 43 Ca can be loaded with reasonable efficiency. This isotope is advantageous for quantum information experiments for several reasons, but chiefly because its ground state hyperfine structure can act as a stable qubit.

•Jan 1, 2003•6 citations

Ultrafast Control of Spin and Motion in Trapped Ions

Jonathan Mizrahi

Trapped atomic ions are a promising medium for quantum computing, due to their long coherence times and potential for scalability. Current methods of entangling ions rely on addressing individual modes of motion within the trap and applying qubit state dependent forces with external fields. This approach can limit the speed of entangling gates and make them vulnerable to decoherence due to coupling to unwanted modes or ion heating. This thesis is directed towards demonstrating novel entanglement schemes which are not limited by the trap frequency, and can be made almost arbitrarily fast. Towards this goal, I report here on the first experiments using ultrafast laser pulses to control the internal and external states of a single trapped ion. I begin with experiments in ultrafast spin control, showing how a single laser pulse can be used to completely control both spin degrees of freedom of the ion qubit in tens of picoseconds. I also show how a train of weak pulses can be used to drive Raman transitions based on a frequency comb. I then discuss experiments using pulses to rapidly entangle the spin with the motion, and how careful spectral redistribution allows a single pulse to execute a spin-dependent momentum kick. Finally, I explain how these spin-dependent momentum kicks can be used in the future to create an ultrafast entangling gate. I go over how such a gate would work, and present experimentally realizable timing sequences which would create a maximally entangled state of two ions in a time faster than the period of motion in the trap.

Bulletin of the American Physical Society•Jan 1, 2013•1 citation

Ultrafast control of spin and motion in trapped ions

Jonathan Mizrahi

Trapped atomic ions are a promising medium for quantum computing, due to their long coherence times and potential for scalability. Current methods of en-tangling ions rely on addressing individual modes of motion within the trap and applying qubit state dependent forces with external fields. This approach can limit the speed of entangling gates and make them vulnerable to decoherence due to coupling to unwanted modes or ion heating. This thesis is directed towards demon-strating novel entanglement schemes which are not limited by the trap frequency, and can be made almost arbitrarily fast. Towards this goal, I report here on the first experiments using ultrafast laser pulses to control the internal and external states of a single trapped ion. I begin with experiments in ultrafast spin control, showing how a single laser pulse can be used to completely control both spin degrees of freedom of the ion qubit in tens of picoseconds. I also show how a train of weak pulses can be used to drive Raman transitions based on a frequency comb. I then discuss exper-iments using pulses to rapidly entangle the spin with the motion, and how careful spectral redistribution allows a single pulse to execute a spin-dependent momentum kick. Finally, I explain how these spin-dependent momentum kicks can be used in the future to create an ultrafast entangling gate. I go over how such a gate would work, and present experimentally realizable timing sequences which would create a maximally entangled state of two ions in a time faster than the period of motion in the trap.

•Jan 1, 2013•4 citations

Surface-electrode ion traps for scalable quantum computing

D. T. C. Allcock

The major challenges in trapped-ion quantum computation are to scale up few-ion experiments to many qubits and to improve control techniques so that quantum logic gates can be carried out with higher fidelities. This thesis reports experimental progress in both of these areas. In the early part of the thesis we describe the fabrication of a surface-electrode ion trap, the development of the apparatus and techniques required to operate it and the successful trapping of 40Ca+ ions. Notably we developed methods to control the orientation of the principal axes and to minimise ion micromotion. We propose a repumping scheme that simplifies heating rate measurements for ions with low-lying D levels, and use it to characterise the electric field noise in the trap. Surface-electrode traps are important because they offer a route to dense integration of electronic and optical control elements using existing microfabrication technology. We explore this scaling route by testing a series of three traps that were microfabricated at Sandia National Laboratories. Investigations of micromotion and charging of the surface by laser beams were carried out and improvements to future traps are suggested. Using one of these traps we also investigated anomalous electrical noise from the electrode surfaces and discovered that it can be reduced by cleaning with a pulsed laser. A factor of two decrease was observed; this represents the first in situ removal of this noise source, an important step towards higher gate fidelities. In the second half of the thesis we describe the design and construction of an experiment for the purpose of replacing laser-driven multi-qubit quantum logic gates with microwave-driven ones. We investigate magnetic-field-independent hyperfine qubits in 40Ca+ as suitable qubits for this scheme. We make a design study of how best to integrate an ion trap with the microwave conductors required to implement the gate and propose a novel integrated resonant structure. The trap was fabricated and ions were successfully loaded. Single-qubit experiments show that the microwave fields above the trap are in excellent agreement with software simulations. There are good prospects for demonstrating a multi-qubit gate in the near future. We conclude by discussing the possibilities for larger-scale quantum computation by combining microfabricated traps and microwave control.

•Jan 1, 2011•6 citations
The outstanding degree of control over trapped ions in Paul traps gives rise to the development of novel quantum manipulation techniques. Optical transitions can be used for precise manipulation of internal and external states. This way, non-classical states can be created which are a key component of quantum algorithms based on quantum logic operations. This powerful optical toolbox enabled the trapped ion system to assume leadership in the field of quantum computation. This thesis addresses two major challenges in the field of micro ion trap quantum optics. The temperature dependence of the heating rate from the ion trap surface is analysed in a novel cryogenic micro ion trap. Furthermore segmented traps allow state manipulations by time dependent electrical potentials, generated by the control voltages. These electrical fields provide a fast and reliable control handle to the ions external degrees of freedom. Quantum computation in Paul trap arrays is based on a combination of ion crystal transport, splitting and merging operations, while laser driven quantum state manipulations are mainly carried out on small ion crystals. Within this thesis a basic building block was realised by performing transport operations with a single ground-state cooled ion. As a highlight of experimental achievements, shuttling in the non-adiabatic regime, on the timescale of the motional period was demonstrated with low residual energy transfer. For his endeavour a specialised low noise arbitrary function generator was designed and manufactured during this thesis. Arbitrary voltage ramps at a sampling rate of up to 2.5 MS/s on up to 12 channels allow the study of a novel excitation method by directly manipulating the ion using electrical forces. Accurate numerical simulations in combination with the fast high resolution voltage supply allow deterministic quantum manipulations via momentum kicks. I report the first experimental demonstration of displaced number states with trapped ions.
Trapped ions within Paul traps have shown to be a promising architecture in the realisation of a quantum information processor together with the ability of providing quantum simulations. Linear Paul traps have demonstrated long coherence times with ions being well isolated from the environment, single and multi-qubit gates and the high fidelity detection of states. The scalability to large number of qubits, incorporating all the previous achievements requires an array of linear ion traps. Microfabrication techniques allow for fabrication and micron level accuracy of the trap electrode dimensions through photolithography techniques. The first part of this thesis presents the experiential setup and trapping of Yb+ ions needed to test large ion trap arrays. This include vacuum systems that can host advanced symmetric and asymmetric ion traps with up to 90 static voltage control electrodes. Demonstration of a single trapped Yb+ ion within a two-layer macroscopic ion trap is presented. with an ion-electrode distance of 310(10) µm. The anomalous heating rate and spectral noise density of the trap was measured, a main form of decoherence within ion traps. The second half of this thesis presents the design and fabrication of multi-layer asymmetric ion traps. This allows for isolated electrodes that cannot be accessed via surface pathways, allowing for higher density of electrodes as well as creating novel trap designs that allow for the potential of quantum simulations to be demonstrated. These include two-dimensional lattices and ring trap designs in which the isolated electrodes provide more control in the ion position. For the microfabrication of these traps I present a novel high-aspect ratio electroplated electrode design that provides shielding of the dielectric layer. This provides a means to mitigate stray electric field due to charge build up on the dielectric surfaces. Electrical testing of the trap structures was performed to test bulk breakdown and surface flashover of the ion trap architectures. Results showed sufficient isolation between electrodes for both radio frequency and static breakdown. Surface flashover voltage measurements over the dielectric layer showed an improvement of more than double over previous results using a new fabrication technique. This will allow for more powerful ion trap chips needed for the next generation of microfabricated ion trap arrays for scalable quantum technologies.
With all the key elements of quantum computing in ion traps demonstrated by the research community, the focus is now placed on building more sophisticated traps with larger numbers of ions to allow practical scale information processing. One promising avenue is to store ions in and shuttle them between many independent traps which serve as potential interaction sites. The core of the work described in this thesis is the experimental evaluation of a microfabricated segmented ion trap, built by Sandia National Laboratories ("Sandia trap"). These experiments required construction of a wholly new optical setup including laser and detection systems, a vacuum system and control electronics. Among our experimental achievements were: successful loading of single and pairs of ions in the microscale trap, measurement of ion storage lifetime, measurement of the motional heating rate with a time-resolved Doppler-cooling method — which showed above than average heating, and implemented a single-ion shuttling method — which reliably transferred the ion through a distance of 360 μm (two DC electrode widths away) and back. These results have been used to improve the next version of the Sandia trap design. We also used computer modelling to study several aspects of ion traps: a mesoscopic ion trap designed for fast ion separation, simulated ion loading to quantify requirements for successful trapping in small and shallow traps, and analyzed a precise shuttling method — where the time dependence of the trapping potential is engineered such that there is minimal motional heating. The results show that ion trap arrays at the 100 μm distance scale are feasible and suggests that such multiple trap designs merit further study.
This thesis describes experimental work towards developing a trapped ion quantum information processor. An existing ion trap apparatus was capable of trapping and laser-cooling single ions or small ion strings of 40 Ca+, and had been used for studies of quantum jumps and natural lifetime measurements in Ca. This thesis describes improvements in this apparatus, which have allowed the stability and the flexibility of experimental control of the ions to be greatly increased. This enabled experiments to read out the spin state of a single trapped ion, and to load ions with isotope selectivity through photoionization. The optical systems were improved by installation of new lasers, optical reference cavities, and a system of acousto-optic modulators for laser intensity switching and frequency control. The photon counting for fluorescence detection was improved, and a new photon time-of-arrival correlation circuit developed. This has permitted rapid and more sensitive detection of micromotion, and hence cancellation of stray fields in the trap. A study of resonant circuits in the low RF, high voltage (10 MHz, 1 kV) regime was carried out with a view to developing a new RF supply for the Paul trap with reduced noise and increased power. A new supply based on a helical resonator was built and used to trap ions. This technique has reduced noise and will permit higher secular frequencies to be attained in the future. A magnetic field B in the ion trap is used to define a quantization axis, and in one series of experiments was required to be of order 100 G to provide a substantial Zeeman splitting. A set of magnetic field coils to control the size and direction of B is described. The design of these posed some problems owing to an unforseen issue with the vacuum chamber. In short, it is magnetizable and acts to first approximation like a magnetic shield. The field coils had to be sufficiently substantial to produce the desired field at the ion even in the presence of this shielding effect, and dark resonance (and other) spectra with Zeeman splitting were obtained to calibrate the field using the ion as a probe. Finally, the thesis describes the successful loading of the ion trap by laser photoionization from a weak atomic beam. This involved two new lasers at 423 nm and 389 nm. Saturated absorption spectroscopy of neutral calcium is first described, then transverse excitation of an atomic beam in our vacuum chamber is used to identify all the main isotopes of calcium and confirm their abundances in our source (a heated sample of natural calcium). Finally, photoionization is used to load the trap. This has three advantages over electron-impact ionization. By avoiding an electron gun, we avoid charging of insulating patches and subsequent electric field drift as they discharge; the flux in the atomic beam and hence calcium (and other) deposits on the electrodes can be greatly reduced; and most importantly, the photoionization is isotope selective. Evidence is presented which suggests that even with an non-enriched source, the rare isotope 43 Ca can be loaded with reasonable efficiency. This isotope is advantageous for quantum information experiments for several reasons, but chiefly because its ground state hyperfine structure can act as a stable qubit.
Trapped atomic ions are a promising medium for quantum computing, due to their long coherence times and potential for scalability. Current methods of entangling ions rely on addressing individual modes of motion within the trap and applying qubit state dependent forces with external fields. This approach can limit the speed of entangling gates and make them vulnerable to decoherence due to coupling to unwanted modes or ion heating. This thesis is directed towards demonstrating novel entanglement schemes which are not limited by the trap frequency, and can be made almost arbitrarily fast. Towards this goal, I report here on the first experiments using ultrafast laser pulses to control the internal and external states of a single trapped ion. I begin with experiments in ultrafast spin control, showing how a single laser pulse can be used to completely control both spin degrees of freedom of the ion qubit in tens of picoseconds. I also show how a train of weak pulses can be used to drive Raman transitions based on a frequency comb. I then discuss experiments using pulses to rapidly entangle the spin with the motion, and how careful spectral redistribution allows a single pulse to execute a spin-dependent momentum kick. Finally, I explain how these spin-dependent momentum kicks can be used in the future to create an ultrafast entangling gate. I go over how such a gate would work, and present experimentally realizable timing sequences which would create a maximally entangled state of two ions in a time faster than the period of motion in the trap.
Trapped atomic ions are a promising medium for quantum computing, due to their long coherence times and potential for scalability. Current methods of en-tangling ions rely on addressing individual modes of motion within the trap and applying qubit state dependent forces with external fields. This approach can limit the speed of entangling gates and make them vulnerable to decoherence due to coupling to unwanted modes or ion heating. This thesis is directed towards demon-strating novel entanglement schemes which are not limited by the trap frequency, and can be made almost arbitrarily fast. Towards this goal, I report here on the first experiments using ultrafast laser pulses to control the internal and external states of a single trapped ion. I begin with experiments in ultrafast spin control, showing how a single laser pulse can be used to completely control both spin degrees of freedom of the ion qubit in tens of picoseconds. I also show how a train of weak pulses can be used to drive Raman transitions based on a frequency comb. I then discuss exper-iments using pulses to rapidly entangle the spin with the motion, and how careful spectral redistribution allows a single pulse to execute a spin-dependent momentum kick. Finally, I explain how these spin-dependent momentum kicks can be used in the future to create an ultrafast entangling gate. I go over how such a gate would work, and present experimentally realizable timing sequences which would create a maximally entangled state of two ions in a time faster than the period of motion in the trap.
The major challenges in trapped-ion quantum computation are to scale up few-ion experiments to many qubits and to improve control techniques so that quantum logic gates can be carried out with higher fidelities. This thesis reports experimental progress in both of these areas. In the early part of the thesis we describe the fabrication of a surface-electrode ion trap, the development of the apparatus and techniques required to operate it and the successful trapping of 40Ca+ ions. Notably we developed methods to control the orientation of the principal axes and to minimise ion micromotion. We propose a repumping scheme that simplifies heating rate measurements for ions with low-lying D levels, and use it to characterise the electric field noise in the trap. Surface-electrode traps are important because they offer a route to dense integration of electronic and optical control elements using existing microfabrication technology. We explore this scaling route by testing a series of three traps that were microfabricated at Sandia National Laboratories. Investigations of micromotion and charging of the surface by laser beams were carried out and improvements to future traps are suggested. Using one of these traps we also investigated anomalous electrical noise from the electrode surfaces and discovered that it can be reduced by cleaning with a pulsed laser. A factor of two decrease was observed; this represents the first in situ removal of this noise source, an important step towards higher gate fidelities. In the second half of the thesis we describe the design and construction of an experiment for the purpose of replacing laser-driven multi-qubit quantum logic gates with microwave-driven ones. We investigate magnetic-field-independent hyperfine qubits in 40Ca+ as suitable qubits for this scheme. We make a design study of how best to integrate an ion trap with the microwave conductors required to implement the gate and propose a novel integrated resonant structure. The trap was fabricated and ions were successfully loaded. Single-qubit experiments show that the microwave fields above the trap are in excellent agreement with software simulations. There are good prospects for demonstrating a multi-qubit gate in the near future. We conclude by discussing the possibilities for larger-scale quantum computation by combining microfabricated traps and microwave control.