Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Motion, Measurement and Control in an Open Quantum System

Andrew C. Doherty

Published Jan 1, 1999• 4 citations
OpenAlex

Abstract

The interaction of a single atom with the light field inside a Fabry-Pérot microcavity in the strong-coupling regime is now an experimentally realizable example of a continuously measured open quantum system. This thesis investigates the motion of an atom due to the interaction with the cavity light field, the possibility of determining the state of the such a system given a series of measurement results and schemes for feedback control of the dynamics which make use of the resulting state estimates. A semiclassical model of atomic motion in an optical cavity is derived and the dependence of the forces on the different parameters is described. A major obstacle to trapping atoms inside the cavity field is that the fluctuations of these forces are typically very much larger than in free space. A quantum mechanical treatment of the atomic motion is also given and it is shown that the motional state of the atom can be highly non-classical. Detection of the phase shift of the light caused by the atom constitutes a high precision measurement of the atomic position and this motivates an investigation of the quantum limits to state estimation under continuous position measurement that accounts for uncertainty about the initial state and the presence of environmental noise or detection inefficiency. Quantum trajectory theory is used to show that after a sufficient period of observation the state of the system is uniquely determined by the measurement results. It is proposed that this state estimate be used to manipulate the system as in techniques of classical control such as dynamic programming. This significantly broadens the range of available quantum mechanical feedback strategies. Finally, a major reason for interest in strong-coupling cavity quantum electrodynamics is the possible application to the developing field of quantum information processing. The limitations imposed by atomic motion on the realization of several quantum computing and communication schemes are investigated. It is shown that schemes which are not critically dependent on the length of the interaction, for example those which employ adiabatic passage, are more robust when atomic motion is considered.

Related papers

Real-time measurement and trapping of single atoms by single photons

Christina J. Hood

Cavity quantum electrodynamics (QED), the system of a single atom interacting with a single mode of a high finesse optical resonator, has tremendous potential for use in quantum logic, quantum information processing, and in enabling observation of quantum mechanical effects in the laboratory. The work of this thesis demonstrates a number of steps toward realizing these goals, by employing an experimental system with the strongest atom-field coupling achieved to date in optical cavity QED. The effects of strong coupling in cavity QED are studied for single cold atoms measured one at a time, in real time. The passage of single atoms through the cavity is employed to map out the frequency response of the system, and to demonstrate that quantum rather than semiclassical theory provides the correct theoretical model. The mechanical effects of strong coupling on single atoms are explored, these experiments demonstrating the first trapping of single atoms with single photons. Additionally, strong coupling enables high signal-to-noise ratio for monitoring atomic position at single photon field strengths; this capability is employed to investigate the motion of atoms trapped within the cavity. The transmitted cavity field is used to reconstruct the trajectories of single atoms, thereby realizing a new form of microscopy - the Atom-Cavity Microscope. Technical developments necessary to create the cavities used in this experiment are detailed. Ideas for future extensions to the experiment are proposed; a zero light-shift dipole force trap, and measurement of photon statistics of a single strongly coupled atom (which realizes a photon blockade device) are discussed.

•Sep 23, 2005•16 citations

Measurement and control of individual quanta in cavity QED

T. W. Lynn

Cavity quantum electrodynamics (QED) in the strong-coupling regime provides the opportunity to monitor and control the dynamics of a simple quantum system. A single Cesium atom interacts strongly with single-photon fields in the mode of a high-finesse optical cavity. When the resulting coherent coupling rate dominates dissipation in the system, strong coupling is realized and the system displays distinctively quantum behavior. The coupling between atomic internal states and the quantized cavity field allows for diverse protocols in quantum state preparation, quantum communication, and quantum logic. However, the atom's external or motional state must also be taken into account. My research develops cavity QED in the limit where the coherent atom-field coupling dominates the atomic kinetic energy and thus significantly affects the atomic center-of-mass motion. In this regime, the interaction of the atom with the cavity field provides both a means of controlling atomic motion and a signal for detecting that motion in real time with high signal-to-noise. The sensing capability of the ``atom-cavity microscope" is exploited to trap single atoms with single-photon fields and to monitor their orbits in real time as they are bound in the cavity. Such real-time position sensing is the basis for a detailed strategy and ongoing experiment to actively stabilize select aspects of an atom's motion within the cavity. As the cavity-enabled position measurement approaches the standard quantum limit, this work begins to realize a quantum servo for atomic position and to address questions of optimal state estimation and state preparation. In combination with other progress in cavity QED, it furthers the goal of controlled atom-field interactions for quantum information science.

•May 22, 2003•5 citations

Quantum measurement and control in single-photon opto-mechanics

Sahar Basiri-Esfahani

Quantum opto-mechanics is a fast moving, broad research field which aims to investigate and control the interaction of light and the quantized motion of mechanical objects and the coupling between them. This allows one to engineer the mechanical quantum state by controlling and measuring the electromagnetic field, and conversely, to control the dynamical evolution of the optical field via its interaction with a mechanical system. Mechanical resonators are accessible in many different shapes and sizes, from kilogram scales in experiments that test gravitational theories to micro- and nano-scales in resolved sideband regime, where the frequency of the mechanical resonator is larger than the bandwidth of the optical cavity. In this regime, it is possible to cool the mechanical object to the ground state which allows a high degree of control and the ability to prepare interesting non-classical states, states that could aid in investigating the quantum dynamics of macroscopic objects. The field of quantum opto-mechanics is a promising testbed for quantum control technologies, such as fundamental tests of quantum mechanics, ultra-sensitive quantum sensors for precise measurements, phonon lasing, mechanical memories with long lifetime and quantum information processing. Furthermore, experiments are progressing toward strong opto-mechanical coupling regimes with single photons. This creates a platform that can take advantage of the nonlinear optical interactions to generate highly non-classical states in such light-matter interfaces. Photonic systems working in the single photon regime will be promising for low power applications and also for implementations of quantum information and computation. Motivated by these applications, this thesis consists of theoretical studies in the context of single photonics. This includes investigating non-classical mechanical state generation and mechanically controlling the dynamical evolution of optical fields in the strong coupling regime single photon opto-mechanics and furthermore, proposing a quantum sensor using single photonics. In this regard, we employ three important formalisms to treat and measure open quantum systems with non-Gaussian input fields: the conditional and unconditional cascaded master equations, Fock-state master equations and input-output Langevin equations. In the context of opto-mechanics, the system to be investigated is composed of two optical cavities with a coupling modulated via a mechanical resonator. In one case, a sequence of single photons are irreversibly sent to one of the optical cavities. After photons go through the opto-mechanical interaction, photon counting measurements are performed on the cavity output, conditionally steering the mechanical state to a highly non-classical Fock state. Numerical calculations are performed to predict the experimental parameters needed to generate a mechanical Fock state before the mechanical object is thermalized. In another case, the same opto-mechanical scheme is employed to conversely modify the state of the optical mode by engineering the state of the mechanical degree of freedom. In this case, it is shown that the opto-mechanical system operates as an effective beam splitter for the input single photons, with a transmission that can be controlled by tuning the number of excitations in the bulk mechanical resonator. When the mechanical resonator has a small coherent amplitude it acts as a quantum control, entangling the optical and mechanical degrees of freedom. As the coherent amplitude of the resonator increases, it acts as a classical control for the input photons. Finally, we propose a novel multi-purpose sensor architecture that can be used for force, refractive index and possibly local temperature detection. In this scheme, two coupled cavities behave as an effective beam splitter. This sensor is based on fourth order interference (the Hong-Ou-Mandel effect) and requires a sequence of single photon pulses and consequently has low pulse power. Changes in the parameter to be measured induce variations in the effective beam splitter reflectivity and result in changes to the visibility of interference. We propose that this generic scheme could be implemented with coupled L3 photonic crystal cavities and find that this system, which only relies on photon coincidence detection and does not need any spectral resolution, can estimate forces as small as 10-7 Newtons and can measure one part per million change in refractive index using a very low input power of 10-10 W.

•Sep 28, 2015•0 citations

Cavity quantum optomechanics with ultracold atoms

Kater W. Murch

A common goal of recent research is the elucidation and control over quantum mechanical behavior in ever-larger physical systems. In this thesis I present an alternative target for investigating the quantum motion of macroscopic bodies: the collective motion of an ultracold atomic gas trapped within a high-finesse Fabry-Perot optical cavity in the single-atom strong-coupling regime of cavity quantum electrodynamics (CQED). When ultracold atoms are trapped in the Lamb-Dicke regime, the cavity-mode structure selects a single collective degree of freedom that is at once actuated by the optical forces from cavity probe light and measured by the cavity’s optical properties. Dispersive optical bistability arising from collective motion of the atomic medium was observed. Measurement of the collective motion was subject to quantum measurement backaction by the quantum force fluctuations of the cavity optical field. The strength and spectrum of these backaction force fluctuations was measured by quantifying the cavity-light-induced heating rate of the intracavity atomic ensemble, finding quantitative agreement with the expected heating rate from quantum optical fluctuations. Dynamical phenomena in the optomechanical system were explored experimentally and theoretically. Quantum limited measurements are discussed and were

•Jan 1, 2008•5 citations

Characterization and Control of a Strongly-Coupled Atom-Cavity System

Miller, Russell Lowell

In recent years, remarkable advances in the science of laser cooling and trapping of atomic samples have lead to breakthroughs in quantum optics and, in particular, in cavity quantum electrodynamics (QED). The ability to optically trap an atom within the mode of a ultra-high finesse cavity of small mode volume for experimentally significant periods of time now allows for the continuous observation of fundamental quantum optical effects. This dissertation will focus on experiments conducted to fully characterize and exert quantum control over a strongly-coupled atom-cavity system consisting of single cesium atoms isolated by a dipole trapping in the mode of a Fabry-Perot optical resonator. In particular, we describe techniques developed and implemented for exerting coherent control over the internal and quantum motional state of these atoms using stimulated Raman processes. We also focus on the applications of this system to quantum networking and quantum information science, particularly within the context of coherently transferring quantum states from atom to quantum optical fields and back. Finally, we describe a series of measurements carried out to explore the characteristic dynamics of the Jaynes-Cummings Hamiltonian which governs the system. This includes spectroscopic measurement of the signature vacuum Rabi splitting for strongly-coupled cavity QED as well as evidence in the time domain for coherent Rabi nutation of excitation between atom and field on resonance.

•May 28, 2009•0 citations

Strategies for real-time position control of a single atom in cavity QED

T. W. Lynn, Kevin M. Birnbaum, Harry J. Kimble

Recent realizations of single-atom trapping and tracking in cavity QED open the door for feedback schemes which actively stabilize the motion of a single atom in real time. We present feedback algorithms for cooling the radial component of motion for a single atom trapped by strong coupling to single-photon fields in an optical cavity. Performance of various algorithms is studied through simulations of single-atom trajectories, with full dynamical and measurement noise included. Closed loop feedback algorithms compare favorably to open-loop "switching" analogs, demonstrating the importance of applying actual position information in real time. The high optical information rate in current experiments enables real-time tracking that approaches the standard quantum limit for broadband position measurements, suggesting that realistic active feedback schemes may reach a regime where measurement backaction appreciably alters the motional dynamics.

arXiv:quant-ph/0507064•Journal of Optics B Quantum and Semiclassical Optics•Sep 14, 2005•12 citations
The interaction of a single atom with the light field inside a Fabry-Pérot microcavity in the strong-coupling regime is now an experimentally realizable example of a continuously measured open quantum system. This thesis investigates the motion of an atom due to the interaction with the cavity light field, the possibility of determining the state of the such a system given a series of measurement results and schemes for feedback control of the dynamics which make use of the resulting state estimates. A semiclassical model of atomic motion in an optical cavity is derived and the dependence of the forces on the different parameters is described. A major obstacle to trapping atoms inside the cavity field is that the fluctuations of these forces are typically very much larger than in free space. A quantum mechanical treatment of the atomic motion is also given and it is shown that the motional state of the atom can be highly non-classical. Detection of the phase shift of the light caused by the atom constitutes a high precision measurement of the atomic position and this motivates an investigation of the quantum limits to state estimation under continuous position measurement that accounts for uncertainty about the initial state and the presence of environmental noise or detection inefficiency. Quantum trajectory theory is used to show that after a sufficient period of observation the state of the system is uniquely determined by the measurement results. It is proposed that this state estimate be used to manipulate the system as in techniques of classical control such as dynamic programming. This significantly broadens the range of available quantum mechanical feedback strategies. Finally, a major reason for interest in strong-coupling cavity quantum electrodynamics is the possible application to the developing field of quantum information processing. The limitations imposed by atomic motion on the realization of several quantum computing and communication schemes are investigated. It is shown that schemes which are not critically dependent on the length of the interaction, for example those which employ adiabatic passage, are more robust when atomic motion is considered.
Cavity quantum electrodynamics (QED), the system of a single atom interacting with a single mode of a high finesse optical resonator, has tremendous potential for use in quantum logic, quantum information processing, and in enabling observation of quantum mechanical effects in the laboratory. The work of this thesis demonstrates a number of steps toward realizing these goals, by employing an experimental system with the strongest atom-field coupling achieved to date in optical cavity QED. The effects of strong coupling in cavity QED are studied for single cold atoms measured one at a time, in real time. The passage of single atoms through the cavity is employed to map out the frequency response of the system, and to demonstrate that quantum rather than semiclassical theory provides the correct theoretical model. The mechanical effects of strong coupling on single atoms are explored, these experiments demonstrating the first trapping of single atoms with single photons. Additionally, strong coupling enables high signal-to-noise ratio for monitoring atomic position at single photon field strengths; this capability is employed to investigate the motion of atoms trapped within the cavity. The transmitted cavity field is used to reconstruct the trajectories of single atoms, thereby realizing a new form of microscopy - the Atom-Cavity Microscope. Technical developments necessary to create the cavities used in this experiment are detailed. Ideas for future extensions to the experiment are proposed; a zero light-shift dipole force trap, and measurement of photon statistics of a single strongly coupled atom (which realizes a photon blockade device) are discussed.
Cavity quantum electrodynamics (QED) in the strong-coupling regime provides the opportunity to monitor and control the dynamics of a simple quantum system. A single Cesium atom interacts strongly with single-photon fields in the mode of a high-finesse optical cavity. When the resulting coherent coupling rate dominates dissipation in the system, strong coupling is realized and the system displays distinctively quantum behavior. The coupling between atomic internal states and the quantized cavity field allows for diverse protocols in quantum state preparation, quantum communication, and quantum logic. However, the atom's external or motional state must also be taken into account. My research develops cavity QED in the limit where the coherent atom-field coupling dominates the atomic kinetic energy and thus significantly affects the atomic center-of-mass motion. In this regime, the interaction of the atom with the cavity field provides both a means of controlling atomic motion and a signal for detecting that motion in real time with high signal-to-noise. The sensing capability of the ``atom-cavity microscope" is exploited to trap single atoms with single-photon fields and to monitor their orbits in real time as they are bound in the cavity. Such real-time position sensing is the basis for a detailed strategy and ongoing experiment to actively stabilize select aspects of an atom's motion within the cavity. As the cavity-enabled position measurement approaches the standard quantum limit, this work begins to realize a quantum servo for atomic position and to address questions of optimal state estimation and state preparation. In combination with other progress in cavity QED, it furthers the goal of controlled atom-field interactions for quantum information science.
Quantum opto-mechanics is a fast moving, broad research field which aims to investigate and control the interaction of light and the quantized motion of mechanical objects and the coupling between them. This allows one to engineer the mechanical quantum state by controlling and measuring the electromagnetic field, and conversely, to control the dynamical evolution of the optical field via its interaction with a mechanical system. Mechanical resonators are accessible in many different shapes and sizes, from kilogram scales in experiments that test gravitational theories to micro- and nano-scales in resolved sideband regime, where the frequency of the mechanical resonator is larger than the bandwidth of the optical cavity. In this regime, it is possible to cool the mechanical object to the ground state which allows a high degree of control and the ability to prepare interesting non-classical states, states that could aid in investigating the quantum dynamics of macroscopic objects. The field of quantum opto-mechanics is a promising testbed for quantum control technologies, such as fundamental tests of quantum mechanics, ultra-sensitive quantum sensors for precise measurements, phonon lasing, mechanical memories with long lifetime and quantum information processing. Furthermore, experiments are progressing toward strong opto-mechanical coupling regimes with single photons. This creates a platform that can take advantage of the nonlinear optical interactions to generate highly non-classical states in such light-matter interfaces. Photonic systems working in the single photon regime will be promising for low power applications and also for implementations of quantum information and computation. Motivated by these applications, this thesis consists of theoretical studies in the context of single photonics. This includes investigating non-classical mechanical state generation and mechanically controlling the dynamical evolution of optical fields in the strong coupling regime single photon opto-mechanics and furthermore, proposing a quantum sensor using single photonics. In this regard, we employ three important formalisms to treat and measure open quantum systems with non-Gaussian input fields: the conditional and unconditional cascaded master equations, Fock-state master equations and input-output Langevin equations. In the context of opto-mechanics, the system to be investigated is composed of two optical cavities with a coupling modulated via a mechanical resonator. In one case, a sequence of single photons are irreversibly sent to one of the optical cavities. After photons go through the opto-mechanical interaction, photon counting measurements are performed on the cavity output, conditionally steering the mechanical state to a highly non-classical Fock state. Numerical calculations are performed to predict the experimental parameters needed to generate a mechanical Fock state before the mechanical object is thermalized. In another case, the same opto-mechanical scheme is employed to conversely modify the state of the optical mode by engineering the state of the mechanical degree of freedom. In this case, it is shown that the opto-mechanical system operates as an effective beam splitter for the input single photons, with a transmission that can be controlled by tuning the number of excitations in the bulk mechanical resonator. When the mechanical resonator has a small coherent amplitude it acts as a quantum control, entangling the optical and mechanical degrees of freedom. As the coherent amplitude of the resonator increases, it acts as a classical control for the input photons. Finally, we propose a novel multi-purpose sensor architecture that can be used for force, refractive index and possibly local temperature detection. In this scheme, two coupled cavities behave as an effective beam splitter. This sensor is based on fourth order interference (the Hong-Ou-Mandel effect) and requires a sequence of single photon pulses and consequently has low pulse power. Changes in the parameter to be measured induce variations in the effective beam splitter reflectivity and result in changes to the visibility of interference. We propose that this generic scheme could be implemented with coupled L3 photonic crystal cavities and find that this system, which only relies on photon coincidence detection and does not need any spectral resolution, can estimate forces as small as 10-7 Newtons and can measure one part per million change in refractive index using a very low input power of 10-10 W.
A common goal of recent research is the elucidation and control over quantum mechanical behavior in ever-larger physical systems. In this thesis I present an alternative target for investigating the quantum motion of macroscopic bodies: the collective motion of an ultracold atomic gas trapped within a high-finesse Fabry-Perot optical cavity in the single-atom strong-coupling regime of cavity quantum electrodynamics (CQED). When ultracold atoms are trapped in the Lamb-Dicke regime, the cavity-mode structure selects a single collective degree of freedom that is at once actuated by the optical forces from cavity probe light and measured by the cavity’s optical properties. Dispersive optical bistability arising from collective motion of the atomic medium was observed. Measurement of the collective motion was subject to quantum measurement backaction by the quantum force fluctuations of the cavity optical field. The strength and spectrum of these backaction force fluctuations was measured by quantifying the cavity-light-induced heating rate of the intracavity atomic ensemble, finding quantitative agreement with the expected heating rate from quantum optical fluctuations. Dynamical phenomena in the optomechanical system were explored experimentally and theoretically. Quantum limited measurements are discussed and were
In recent years, remarkable advances in the science of laser cooling and trapping of atomic samples have lead to breakthroughs in quantum optics and, in particular, in cavity quantum electrodynamics (QED). The ability to optically trap an atom within the mode of a ultra-high finesse cavity of small mode volume for experimentally significant periods of time now allows for the continuous observation of fundamental quantum optical effects. This dissertation will focus on experiments conducted to fully characterize and exert quantum control over a strongly-coupled atom-cavity system consisting of single cesium atoms isolated by a dipole trapping in the mode of a Fabry-Perot optical resonator. In particular, we describe techniques developed and implemented for exerting coherent control over the internal and quantum motional state of these atoms using stimulated Raman processes. We also focus on the applications of this system to quantum networking and quantum information science, particularly within the context of coherently transferring quantum states from atom to quantum optical fields and back. Finally, we describe a series of measurements carried out to explore the characteristic dynamics of the Jaynes-Cummings Hamiltonian which governs the system. This includes spectroscopic measurement of the signature vacuum Rabi splitting for strongly-coupled cavity QED as well as evidence in the time domain for coherent Rabi nutation of excitation between atom and field on resonance.
Recent realizations of single-atom trapping and tracking in cavity QED open the door for feedback schemes which actively stabilize the motion of a single atom in real time. We present feedback algorithms for cooling the radial component of motion for a single atom trapped by strong coupling to single-photon fields in an optical cavity. Performance of various algorithms is studied through simulations of single-atom trajectories, with full dynamical and measurement noise included. Closed loop feedback algorithms compare favorably to open-loop "switching" analogs, demonstrating the importance of applying actual position information in real time. The high optical information rate in current experiments enables real-time tracking that approaches the standard quantum limit for broadband position measurements, suggesting that realistic active feedback schemes may reach a regime where measurement backaction appreciably alters the motional dynamics.