Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Laser diode excitation of lithium atoms

C. C. Bradley, J. Chen, Randall G. Hulet

Published May 21, 1990• 0 citations
OpenAlex

Abstract

Laser diodes are an attractive source of coherent light for use in spectroscopy and laser cooling. These lasers are capable of single-mode operation, can be rapidly modulated, are easy to use, and are less expensive than alternative sources. We have used a laser diode to excite the principal transition of atomic lithium at 671 nm and utilizad this source in a laser cooling experiment.

Related papers

A self-injected, diode-pumped, solid-state ring laser for laser cooling of Li atoms

Yudai Miake, Takashi Mukaiyama, Kenneth M. O’Hara +1 more

We have constructed a solid-state light source for experiments with laser cooled lithium atoms based on a Nd:YVO4 ring laser with second-harmonic generation. Unidirectional lasing, an improved mode selection, and a high output power of the ring laser were achieved by weak coupling to an external cavity which contained the lossy elements required for single frequency operation. Continuous frequency tuning is accomplished by controlling two piezoelectric transducers (PZTs) in the internal and the external cavities simultaneously. The light source has been utilized to trap and cool fermionic lithium atoms into the quantum degenerate regime.

arXiv:1504.02262•Review of Scientific Instruments•Apr 1, 2015•7 citations

A laser diode system and its use in a laser cooling experiment

C. C. Bradley

A system to control and stabilize the output of visible laser diodes was developed and used to measure the velocity distribution of lithium atoms in a laser cooling experiment. Circuitry was designed and built for controlling the diode temperature and current, and optical feedback from a grating was used to further tune the laser and to narrow its lineshape. In the experiment, atoms from a thermal lithium beam were slowed to near zero velocity using a multi-frequency relay chirp technique.

•Jan 1, 1992•0 citations

Instrumentation for multistep excitation of lithium atoms to Rydberg states

Chun-ho Iu, G. D. Stevens, Harold J. Metcalf

We have developed a diode laser apparatus to excite Li from its ground 2S state, through 2P and 3S, to its Rydberg states with three cw diode lasers operating at λ = 671 nm, 813 nm, and 630-635 nm. A He-Ne laser at λ = 633 is sometimes used in place of the 635-nm diode laser for the last step. The output power of each of these lasers was ~1 mW. We describe our technique of locking the first two lasers on Li resonance lines by obtaining a fluorescent signal from the second decay (3S ? 2P) that is normally overpowered by a strong background of fluorescent light from the first decay (2P ? 2S). We used two balanced photodiodes to reject the strong fluorescent light without loss of collection efficiency. A rejection ratio as high as 100 has been obtained.

Applied Optics•May 20, 1995•6 citations

Diode-laser-based light sources for laser cooling of trapped Yb/sup +/ ions

K. Sugiyama, A. Wakita, A. Nakata

We are developing a light source at 370 nm for driving the /sup 2/S/sub 1/2/-/sup 2/P/sub 1/2/ cooling transition by sum-frequency mixing of radiation from two diode lasers with a doubly resonant external cavity. To drive the /sup 2/D/sub 3/2/-/sup 3/D[3/2]/sub 1/2/ repumping transition at 935 nm, we developed two types of external cavity diode lasers. Applications of them to laser-cooled trapped Yb/sup +/ ions are also presented.

Conference on Precision Electromagnetic Measurements•Nov 7, 2002•4 citations

Optogalvanic spectroscopy of silicon atoms towards laser cooling of silicon

Hiroshi Kumagai, Y. Ueda, T. Iwane +3 more

Summary form only given. Various atoms belonging to the elements of alkali metals, alkaline-earth metals, and rare gases have been cooled by laser since Haensch and Schawlow proposed laser cooling of atoms in 1975. The resonant frequencies for these atoms have been accessible with conventional lasers. By contrast, silicon atoms have not been the same case as these elements, while there are various potential applications such as atom lithography and atom holography. Therefore, we developed the light source for laser cooling of silicon atoms for the first time. The all-solid-state light source can radiate a continuous-wave and single-frequency coherent light at 252 nm whose linewidth is 11 MHz, which is narrow enough because the natural linewidth of the laser cooling transition is 29 MHz. Moreover, the deep ultraviolet output is stable, because the power fluctuation is less than 5%. Towards laser cooling of silicon atoms, we should know the accurate frequency of our light source. Therefore, we perform the optogalvanic spectroscopy of silicon atoms with a hollow-cathode lamp to set the frequency. In order to examine the performance of the silicon-hollow-cathode lamp, we demonstrated the spectroscopic experiment with the third harmonic coherent light of a ns Ti:sapphire laser, which provides 10 ns pulsed light with a 10 Hz repetition rate. Around 252 nm, we observed optogalvanic signals of neutral silicon atoms.

European Quantum Electronics Conference (EQEC)•Jan 1, 2003•0 citations

Stimulated Raman Spectroscopy with a Modulated External Cavity Diode Laser

C. S. Wood, S. C. Bennett, Doyoun Cho +1 more

The usefulness of stimulated Raman transitions has been demonstrated in a variety of different applications. These two-photon transitions have the capability of very high resolution because the transition linewidths depend on the relative jitter between two frequencies, rather than absolute jitter on either one. Recent demonstrations include laser cooling and atomic interferometry [1]. They may also be needed for improved atomic clocks [2]. Due to this high resolution, stimulated Raman transitions can be a direct replacement for a microwave cavity and are often more compatible with optical experiments because a laser beam requires less space.

Semiconductor Lasers: Advanced Devices and Applications•Jan 1, 1995•0 citations
Laser diodes are an attractive source of coherent light for use in spectroscopy and laser cooling. These lasers are capable of single-mode operation, can be rapidly modulated, are easy to use, and are less expensive than alternative sources. We have used a laser diode to excite the principal transition of atomic lithium at 671 nm and utilizad this source in a laser cooling experiment.
We have constructed a solid-state light source for experiments with laser cooled lithium atoms based on a Nd:YVO4 ring laser with second-harmonic generation. Unidirectional lasing, an improved mode selection, and a high output power of the ring laser were achieved by weak coupling to an external cavity which contained the lossy elements required for single frequency operation. Continuous frequency tuning is accomplished by controlling two piezoelectric transducers (PZTs) in the internal and the external cavities simultaneously. The light source has been utilized to trap and cool fermionic lithium atoms into the quantum degenerate regime.
We have developed a diode laser apparatus to excite Li from its ground 2S state, through 2P and 3S, to its Rydberg states with three cw diode lasers operating at λ = 671 nm, 813 nm, and 630-635 nm. A He-Ne laser at λ = 633 is sometimes used in place of the 635-nm diode laser for the last step. The output power of each of these lasers was ~1 mW. We describe our technique of locking the first two lasers on Li resonance lines by obtaining a fluorescent signal from the second decay (3S ? 2P) that is normally overpowered by a strong background of fluorescent light from the first decay (2P ? 2S). We used two balanced photodiodes to reject the strong fluorescent light without loss of collection efficiency. A rejection ratio as high as 100 has been obtained.
Summary form only given. Various atoms belonging to the elements of alkali metals, alkaline-earth metals, and rare gases have been cooled by laser since Haensch and Schawlow proposed laser cooling of atoms in 1975. The resonant frequencies for these atoms have been accessible with conventional lasers. By contrast, silicon atoms have not been the same case as these elements, while there are various potential applications such as atom lithography and atom holography. Therefore, we developed the light source for laser cooling of silicon atoms for the first time. The all-solid-state light source can radiate a continuous-wave and single-frequency coherent light at 252 nm whose linewidth is 11 MHz, which is narrow enough because the natural linewidth of the laser cooling transition is 29 MHz. Moreover, the deep ultraviolet output is stable, because the power fluctuation is less than 5%. Towards laser cooling of silicon atoms, we should know the accurate frequency of our light source. Therefore, we perform the optogalvanic spectroscopy of silicon atoms with a hollow-cathode lamp to set the frequency. In order to examine the performance of the silicon-hollow-cathode lamp, we demonstrated the spectroscopic experiment with the third harmonic coherent light of a ns Ti:sapphire laser, which provides 10 ns pulsed light with a 10 Hz repetition rate. Around 252 nm, we observed optogalvanic signals of neutral silicon atoms.
The usefulness of stimulated Raman transitions has been demonstrated in a variety of different applications. These two-photon transitions have the capability of very high resolution because the transition linewidths depend on the relative jitter between two frequencies, rather than absolute jitter on either one. Recent demonstrations include laser cooling and atomic interferometry [1]. They may also be needed for improved atomic clocks [2]. Due to this high resolution, stimulated Raman transitions can be a direct replacement for a microwave cavity and are often more compatible with optical experiments because a laser beam requires less space.