Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Quantum noise correlations and amplifiers in mesoscopic systems

Pasi Lähteenmäki

Published Jan 1, 2016• 0 citations
OpenAlex

Abstract

This thesis work deals with a range of superconducting devices operated near the fundamental performance limits set by quantum mechanics along with the nature of quantum vacuum itself when perturbed by such devices. These devices are operated in a dilution refrigerator cooled down to sub-Kelvin temperatures. Low temperature is absolutely essential for quantum behavior of these devices and the minimal inherent noise contribution. Biased, selectively damped superconducting tunnel junction, (also known as the Josephson junction) displaying negative differential resistance, was employed to construct a device capable of amplifying weak microwave signal reflections from it. This device can be operated near the intrinsic precision limits set by the Heisenberg's uncertainty principle. Arrays of Superconducting Quantum Interference Devices (SQUIDs), operated below the critical current, can be used for metamaterial resonators whose resonant frequency can be quickly modulated by magnetic flux. These devices are operated as parametric amplifiers and they are capable of amplifying weak microwave signals near the quantum limit of noise. But more importantly, they are capable of perturbing the vacuum itself, which creates correlated photon pairs seeded by vacuum fluctuations. This effect is known as the dynamical Casimir effect (DCE) and is demonstrated in this thesis work by using power and correlation measurements at microwave frequencies. Furthermore, investigations on the DCE have been extended using a double modulation scheme yielding vacuum-induced coherence and tripartite correlations. Nanocarbon devices have also been studied in this thesis, in particular a wideband low noise nanotube electrometer constructed from a nanotube with proximity induced superconductivity. This device has certain unique benefits when operated in a microwave environment which are discussed in the thesis. Another nanocarbon device, a double quantum dot constructed from graphene and superconducting leads has been used to demonstrate Cooper-pair splitting. This device operates as a tunable source of entangled electrons.

Related papers

Microwave Experiments and Noise in Mesoscopic Devices

Jayanta Sarkar

This thesis is a compilation of several works in the area of condensed matter physics, and with devices based on superconducting Josephson junctions (JJ) as the common denominator for the presented projects apart from the work on diffusive systems. Microwave measurements were conducted on a Superconducting Cooper pair transistor to explore its current-phase relationship. Measurements on a JJ-based qubit coupled to a LC resonator revealed the vibronic transitions obeying the Franck-Condon principle. The main body of the thesis is the work done on the Bloch Oscillating Transistor (BOT), an ultra low noise quantum amplifier. In the present work, we investigated the dynamics of the BOT near the bifurcation threshold as well as implemented differential BOTs to check its capability to reject common mode signals. To account for our studies of quantum features in mesoscopic systems other than JJs, we performed an experiment similar to the Hanbury-Brown and Twiss interferometry in optics. For this mesoscopic interference experiment we selected a multiterminal diffusive system. We developed a low temperature noise measurement scheme to study current-current correlations in the GHz frequency range. In our experiments we found a small positive HBT exchange correction factor in the non-interacting limit at low bias voltage in the presence of quantum interference. We found negative exchange correction factor in the hot electron case for similar structures, which agrees well with the theory. Altogether, our experiments demonstrated the theoretically predicted HBT exchange effects in non-interacting and interacting regime of electron transport in a diffusive mesoscopic system.

•Jan 1, 2015•1 citation

Parametric interactions with signals and the vacuum

Michaël Simoen

In this thesis I present different experiments on superconducting circuits exploring parametric interactions with external signals and the vacuum in the microwave regime. These parametric processes are the result of the periodic modulation of a property of a system which results in different interactions. The systems used in this thesis are circuits where the nonlinear inductance of a superconducting quantum interference device (SQUID) is parametrically driven.I present the first experimental observation of the dynamical Casimir effect (DCE), since it was predicted in 1970. The DCE is an interaction between the vacuum and a periodically modulated boundary condition of the electromagnetic field, here implemented by a flux-tuned SQUID. In essence the modulated boundary will parametrically amplify the vacuum fluctuations which results in the pairwise generation of photons over a broad frequency range. I have characterized the system and measured the statistical properties of the emitted radiation to show that the radiation exhibits two-mode squeezing.Next, I present measurements on a superconducting multimode resonator containing a SQUID. I show that it is possible to get parametric amplification by driving the SQUID at either twice the frequency of one of the modes or by driving it at the sum of two mode frequencies. In both cases I show that it is possible to reach quantum-limited noise performance.In the same system I also demonstrate frequency conversion which occurs when the system is pumped at the difference frequency between two modes. Microwave photons are coherently transferred from one mode to the other. I show that the coupling strength depends linearly on the applied pump amplitude.The thesis also contains a linearized theoretical model to describe and analyze the flux-pumped SQUID. The model describes an equivalent circuit element called the pumpistor, with an impedance which depends on the pump phase. I show that under specific conditions the impedance becomes real and negative allowing pump power to be injected into the circuit, providing gain.Finally I also present a demonstration of an on-chip Mach-Zehnder interferometer. This experiment uses the tunability of the SQUID to provide a controllable phase shift in one of the interferometer arms. The transmission through the device can be modulated with a maximum change of 45 dB.

•Jan 1, 2015•4 citations

Microstrip Superconducting Quantum Interference Devices for Quantum Information Science

De Feo, P Michael

Quantum-limited amplification in the microwave frequency range is of both practical and fundamental importance. The weak signals corresponding to single microwave photons require substantial amplification to resolve. When probing quantum excitations of the electromagnetic field, the substantial noise produced by standard amplifiers dominates the signal, therefore, several averages must be accumulated to achieve even a modest signal-to-noise ratio. Even worse, the back-action on the system due to amplifier noise can hasten the decay of the quantum state. In recent years, low-noise microwave-frequency amplification has been advancing rapidly and one field that would benefit greatly from this is circuit quantum electrodynamics (cQED). The development of circuit quantum electrodynamics---which implements techniques of quantum optics at microwave frequencies---has led to revolutionary progress in the field of quantum information science. cQED employs quantum bits (qubits) and superconducting microwave resonators in place of the atoms and cavities used in quantum optics permitting preparation and control of low energy photon states in macroscopic superconducting circuits at millikelvin temperatures. We have developed a microstrip superconducting quantum interference device (SQUID) amplifier (MSA) to provide the first stage of amplification for these systems. Employing sub-micron Josephson tunnel junctions for enhanced gain, these MSAs operate at microwave frequencies and are optimized to perform with near quantum-limited noise characteristics. Our MSA is utilized as the first stage of amplification to probe the dynamics of a SQUID oscillator. The SQUID oscillator is a flux-tunable microwave resonator formed by a capacitively shunted dc SQUID. Josephson plasma oscillations are induced by pulsed microwave excitations at the resonant frequency of the oscillator. Once pulsed, decaying plasma oscillations are observed in the time domain. By measuring with pulse amplitudes approaching the critical current of the SQUID, it is possible to probe the free evolution of a highly nonlinear oscillator.

•Jan 1, 2012•0 citations

Selective single- and double-mode quantum-limited amplifier

Abdul Mohamed, Elham Zohari, Jarryd J. Pla +2 more

A quantum-limited amplifier enables the amplification of weak signals while introducing minimal noise dictated by the principles of quantum mechanics. Such amplifiers serve a broad spectrum of applications in quantum computing, including fast and accurate readout of superconducting qubits and spins, as well as various uses in quantum sensing and metrology. Parametric amplification, primarily developed with use of Josephson junctions, has evolved into the leading technology for highly effective microwave measurements within quantum circuits. Despite their significant contributions, these amplifiers face fundamental limitations, such as their inability to handle high powers, their sensitivity to parasitic magnetic fields, and particularly their limitation to operate only at millikelvin temperatures. To tackle these challenges, here we experimentally develop a novel quantum-limited amplifier based on superconducting kinetic inductance and present an extensive theoretical model to describe this nonlinear coupled-mode system. Our device surpasses the conventional constraints associated with Josephson-junction amplifiers by operating at much higher temperatures up to 4.5 K. With two distinct spectral modes and tunability through bias current, this amplifier can operate selectively in both the single-mode-amplification regime and the double-mode-amplification regime near the quantum noise limit. Using a nonlinear thin film exhibiting kinetic inductance, our device attains gain exceeding 50 dB in a single-mode configuration and 32 dB in a double-mode configuration, while adding 0.82 input-referred noise quanta. Importantly, this amplifier eliminates the need for Josephson junctions, resulting in the capability to handle significantly higher powers than Josephson junction--based amplifiers. It also demonstrates resilience in the presence of magnetic fields, offers a straightforward design, and increases reliability. This positions the amplifier as a versatile solution for quantum applications and facilitates its integration into future superconducting quantum computers.

arXiv:2311.11496•Physical Review Applied•Jun 24, 2024•8 citations

Quantum noise limited microwave amplification using a graphene Josephson junction

Joydip Sarkar, Kishor V. Salunkhe, Supriya Mandal +7 more

Josephson junctions (JJ) and their tunable properties, including their nonlinearities, form the core of superconducting circuit quantum electrodynamics (cQED). In quantum circuits, low-noise amplification of feeble microwave signals is essential and the Josephson parametric amplifiers (JPA) are the widely used devices. The existing JPAs are based on Al-AlOx-Al tunnel junctions realized in a superconducting quantum interference device geometry, where magnetic flux is the knob for tuning the frequency. Recent experimental realizations of 2D van der Waals JJs provide an opportunity to implement various cQED devices with the added advantage of tuning the junction properties and the operating point using a gate potential. While other components of a possible 2D van der Waals cQED architecture have been demonstrated -- quantum noise limited amplifier, an essential component, has not been realized. Here we implement a quantum noise limited JPA, using a graphene JJ, that has linear resonance gate tunability of 3.5 GHz. We report 24 dB amplification with 10 MHz bandwidth and -130 dBm saturation power; performance on par with the best single-junction JPAs. Importantly, our gate tunable JPA works in the quantum-limited noise regime which makes it an attractive option for highly sensitive signal processing. Our work has implications for novel bolometers -- the low heat capacity of graphene together with JJ nonlinearity can result in an extremely sensitive microwave bolometer embedded inside a quantum noise-limited amplifier. In general, our work will open up exploration of scalable device architecture of 2D van der Waals materials by integrating a sensor with the quantum amplifier.

arXiv:2204.02103•Apr 5, 2022•5 citations

Josephson junction microwave amplifier in self-organized noise compression mode

Pasi Lähteenmäki, Visa Vesterinen, Juha Hassel +2 more

The fundamental noise limit of a phase-preserving amplifier at frequency [Formula: see text] is the standard quantum limit [Formula: see text]. In the microwave range, the best candidates have been amplifiers based on superconducting quantum interference devices (reaching the noise temperature [Formula: see text] at 700 MHz), and non-degenerate parametric amplifiers (reaching noise levels close to the quantum limit [Formula: see text] at 8 GHz). We introduce a new type of an amplifier based on the negative resistance of a selectively damped Josephson junction. Noise performance of our amplifier is limited by mixing of quantum noise from Josephson oscillation regime down to the signal frequency. Measurements yield nearly quantum-limited operation, [Formula: see text] at 2.8 GHz, owing to self-organization of the working point. Simulations describe the characteristics of our device well and indicate potential for wide bandwidth operation.

arXiv:1406.0197•Scientific Reports•Feb 20, 2012•17 citations
This thesis work deals with a range of superconducting devices operated near the fundamental performance limits set by quantum mechanics along with the nature of quantum vacuum itself when perturbed by such devices. These devices are operated in a dilution refrigerator cooled down to sub-Kelvin temperatures. Low temperature is absolutely essential for quantum behavior of these devices and the minimal inherent noise contribution. Biased, selectively damped superconducting tunnel junction, (also known as the Josephson junction) displaying negative differential resistance, was employed to construct a device capable of amplifying weak microwave signal reflections from it. This device can be operated near the intrinsic precision limits set by the Heisenberg's uncertainty principle. Arrays of Superconducting Quantum Interference Devices (SQUIDs), operated below the critical current, can be used for metamaterial resonators whose resonant frequency can be quickly modulated by magnetic flux. These devices are operated as parametric amplifiers and they are capable of amplifying weak microwave signals near the quantum limit of noise. But more importantly, they are capable of perturbing the vacuum itself, which creates correlated photon pairs seeded by vacuum fluctuations. This effect is known as the dynamical Casimir effect (DCE) and is demonstrated in this thesis work by using power and correlation measurements at microwave frequencies. Furthermore, investigations on the DCE have been extended using a double modulation scheme yielding vacuum-induced coherence and tripartite correlations. Nanocarbon devices have also been studied in this thesis, in particular a wideband low noise nanotube electrometer constructed from a nanotube with proximity induced superconductivity. This device has certain unique benefits when operated in a microwave environment which are discussed in the thesis. Another nanocarbon device, a double quantum dot constructed from graphene and superconducting leads has been used to demonstrate Cooper-pair splitting. This device operates as a tunable source of entangled electrons.
This thesis is a compilation of several works in the area of condensed matter physics, and with devices based on superconducting Josephson junctions (JJ) as the common denominator for the presented projects apart from the work on diffusive systems. Microwave measurements were conducted on a Superconducting Cooper pair transistor to explore its current-phase relationship. Measurements on a JJ-based qubit coupled to a LC resonator revealed the vibronic transitions obeying the Franck-Condon principle. The main body of the thesis is the work done on the Bloch Oscillating Transistor (BOT), an ultra low noise quantum amplifier. In the present work, we investigated the dynamics of the BOT near the bifurcation threshold as well as implemented differential BOTs to check its capability to reject common mode signals. To account for our studies of quantum features in mesoscopic systems other than JJs, we performed an experiment similar to the Hanbury-Brown and Twiss interferometry in optics. For this mesoscopic interference experiment we selected a multiterminal diffusive system. We developed a low temperature noise measurement scheme to study current-current correlations in the GHz frequency range. In our experiments we found a small positive HBT exchange correction factor in the non-interacting limit at low bias voltage in the presence of quantum interference. We found negative exchange correction factor in the hot electron case for similar structures, which agrees well with the theory. Altogether, our experiments demonstrated the theoretically predicted HBT exchange effects in non-interacting and interacting regime of electron transport in a diffusive mesoscopic system.
In this thesis I present different experiments on superconducting circuits exploring parametric interactions with external signals and the vacuum in the microwave regime. These parametric processes are the result of the periodic modulation of a property of a system which results in different interactions. The systems used in this thesis are circuits where the nonlinear inductance of a superconducting quantum interference device (SQUID) is parametrically driven.I present the first experimental observation of the dynamical Casimir effect (DCE), since it was predicted in 1970. The DCE is an interaction between the vacuum and a periodically modulated boundary condition of the electromagnetic field, here implemented by a flux-tuned SQUID. In essence the modulated boundary will parametrically amplify the vacuum fluctuations which results in the pairwise generation of photons over a broad frequency range. I have characterized the system and measured the statistical properties of the emitted radiation to show that the radiation exhibits two-mode squeezing.Next, I present measurements on a superconducting multimode resonator containing a SQUID. I show that it is possible to get parametric amplification by driving the SQUID at either twice the frequency of one of the modes or by driving it at the sum of two mode frequencies. In both cases I show that it is possible to reach quantum-limited noise performance.In the same system I also demonstrate frequency conversion which occurs when the system is pumped at the difference frequency between two modes. Microwave photons are coherently transferred from one mode to the other. I show that the coupling strength depends linearly on the applied pump amplitude.The thesis also contains a linearized theoretical model to describe and analyze the flux-pumped SQUID. The model describes an equivalent circuit element called the pumpistor, with an impedance which depends on the pump phase. I show that under specific conditions the impedance becomes real and negative allowing pump power to be injected into the circuit, providing gain.Finally I also present a demonstration of an on-chip Mach-Zehnder interferometer. This experiment uses the tunability of the SQUID to provide a controllable phase shift in one of the interferometer arms. The transmission through the device can be modulated with a maximum change of 45 dB.
Quantum-limited amplification in the microwave frequency range is of both practical and fundamental importance. The weak signals corresponding to single microwave photons require substantial amplification to resolve. When probing quantum excitations of the electromagnetic field, the substantial noise produced by standard amplifiers dominates the signal, therefore, several averages must be accumulated to achieve even a modest signal-to-noise ratio. Even worse, the back-action on the system due to amplifier noise can hasten the decay of the quantum state. In recent years, low-noise microwave-frequency amplification has been advancing rapidly and one field that would benefit greatly from this is circuit quantum electrodynamics (cQED). The development of circuit quantum electrodynamics---which implements techniques of quantum optics at microwave frequencies---has led to revolutionary progress in the field of quantum information science. cQED employs quantum bits (qubits) and superconducting microwave resonators in place of the atoms and cavities used in quantum optics permitting preparation and control of low energy photon states in macroscopic superconducting circuits at millikelvin temperatures. We have developed a microstrip superconducting quantum interference device (SQUID) amplifier (MSA) to provide the first stage of amplification for these systems. Employing sub-micron Josephson tunnel junctions for enhanced gain, these MSAs operate at microwave frequencies and are optimized to perform with near quantum-limited noise characteristics. Our MSA is utilized as the first stage of amplification to probe the dynamics of a SQUID oscillator. The SQUID oscillator is a flux-tunable microwave resonator formed by a capacitively shunted dc SQUID. Josephson plasma oscillations are induced by pulsed microwave excitations at the resonant frequency of the oscillator. Once pulsed, decaying plasma oscillations are observed in the time domain. By measuring with pulse amplitudes approaching the critical current of the SQUID, it is possible to probe the free evolution of a highly nonlinear oscillator.
A quantum-limited amplifier enables the amplification of weak signals while introducing minimal noise dictated by the principles of quantum mechanics. Such amplifiers serve a broad spectrum of applications in quantum computing, including fast and accurate readout of superconducting qubits and spins, as well as various uses in quantum sensing and metrology. Parametric amplification, primarily developed with use of Josephson junctions, has evolved into the leading technology for highly effective microwave measurements within quantum circuits. Despite their significant contributions, these amplifiers face fundamental limitations, such as their inability to handle high powers, their sensitivity to parasitic magnetic fields, and particularly their limitation to operate only at millikelvin temperatures. To tackle these challenges, here we experimentally develop a novel quantum-limited amplifier based on superconducting kinetic inductance and present an extensive theoretical model to describe this nonlinear coupled-mode system. Our device surpasses the conventional constraints associated with Josephson-junction amplifiers by operating at much higher temperatures up to 4.5 K. With two distinct spectral modes and tunability through bias current, this amplifier can operate selectively in both the single-mode-amplification regime and the double-mode-amplification regime near the quantum noise limit. Using a nonlinear thin film exhibiting kinetic inductance, our device attains gain exceeding 50 dB in a single-mode configuration and 32 dB in a double-mode configuration, while adding 0.82 input-referred noise quanta. Importantly, this amplifier eliminates the need for Josephson junctions, resulting in the capability to handle significantly higher powers than Josephson junction--based amplifiers. It also demonstrates resilience in the presence of magnetic fields, offers a straightforward design, and increases reliability. This positions the amplifier as a versatile solution for quantum applications and facilitates its integration into future superconducting quantum computers.
Josephson junctions (JJ) and their tunable properties, including their nonlinearities, form the core of superconducting circuit quantum electrodynamics (cQED). In quantum circuits, low-noise amplification of feeble microwave signals is essential and the Josephson parametric amplifiers (JPA) are the widely used devices. The existing JPAs are based on Al-AlOx-Al tunnel junctions realized in a superconducting quantum interference device geometry, where magnetic flux is the knob for tuning the frequency. Recent experimental realizations of 2D van der Waals JJs provide an opportunity to implement various cQED devices with the added advantage of tuning the junction properties and the operating point using a gate potential. While other components of a possible 2D van der Waals cQED architecture have been demonstrated -- quantum noise limited amplifier, an essential component, has not been realized. Here we implement a quantum noise limited JPA, using a graphene JJ, that has linear resonance gate tunability of 3.5 GHz. We report 24 dB amplification with 10 MHz bandwidth and -130 dBm saturation power; performance on par with the best single-junction JPAs. Importantly, our gate tunable JPA works in the quantum-limited noise regime which makes it an attractive option for highly sensitive signal processing. Our work has implications for novel bolometers -- the low heat capacity of graphene together with JJ nonlinearity can result in an extremely sensitive microwave bolometer embedded inside a quantum noise-limited amplifier. In general, our work will open up exploration of scalable device architecture of 2D van der Waals materials by integrating a sensor with the quantum amplifier.
The fundamental noise limit of a phase-preserving amplifier at frequency [Formula: see text] is the standard quantum limit [Formula: see text]. In the microwave range, the best candidates have been amplifiers based on superconducting quantum interference devices (reaching the noise temperature [Formula: see text] at 700 MHz), and non-degenerate parametric amplifiers (reaching noise levels close to the quantum limit [Formula: see text] at 8 GHz). We introduce a new type of an amplifier based on the negative resistance of a selectively damped Josephson junction. Noise performance of our amplifier is limited by mixing of quantum noise from Josephson oscillation regime down to the signal frequency. Measurements yield nearly quantum-limited operation, [Formula: see text] at 2.8 GHz, owing to self-organization of the working point. Simulations describe the characteristics of our device well and indicate potential for wide bandwidth operation.