Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

World Academy of Science, Engineering and Technology, International Journal of Computer, Electrical, Automation, Control and Information Engineering

Enhancing The Error-Correcting Performance Of Ldpc Codes Through An Efficient Use Of Decoding Iterations

Insah Bhurtah, Pierre Clarel Catherine, K. M. S. Soyjaudah

Published Apr 28, 2013• 0 citations
Publisher

Abstract

The decoding of Low-Density Parity-Check (LDPC) codes is operated over a redundant structure known as the bipartite graph, meaning that the full set of bit nodes is not absolutely necessary for decoder convergence. In 2008, Soyjaudah and Catherine designed a recovery algorithm for LDPC codes based on this assumption and showed that the error-correcting performance of their codes outperformed conventional LDPC Codes. In this work, the use of the recovery algorithm is further explored to test the performance of LDPC codes while the number of iterations is progressively increased. For experiments conducted with small blocklengths of up to 800 bits and number of iterations of up to 2000, the results interestingly demonstrate that contrary to conventional wisdom, the error-correcting performance keeps increasing with increasing number of iterations.

DOI
10.5281/zenodo.1328889

Related papers

Techniques for improving ldpc codes performance

Esa Alghonaim

Low Density Parity Check (LDPC) codes are considered to be one of the best classes of error-correcting codes. This thesis deals with two major issues in LDPC codes: decoder design to enhance error correction performance and efficient decoder implementation. Five techniques have been introduced in this thesis. First, an efficient platform for LDPC code design and performance evaluation is developed. This platform implements parallel simulation algorithms to efficiently evaluate the performance of the proposed algorithms for LDPC decoders and code design. Second, an innovative technique is introduced to improve the performance of LDPC decoding in the error-floor region. Special structures in the code graph, called trapping sets, are considered to be the major source of decoding errors in the error-floor region. The proposed technique is based on eliminating the negative effect of trapping sets during LDPC decoding. As a third contribution, a novel approach to improve the decoder performance and/or throughput is introduced. This approach is based on utilizing LDPC decoder idle times by introducing two queues: one at the decoder input and the other at the decoder output. This architecture enables the decoder to run extra iterations beyond the conventional maximum allowable iterations. The fourth proposed technique reduces the bit error rate of LDPC decoders. This technique is based on tracking the number of failed parity check equations in the intermediate decoding iterations, rather than only relying on the final decoder output (after reaching the maximum number of iterations). The last proposed technique deals with the construction of interconnect efficient fully-parallel LDPC codes with high error correction performance. Fully-parallel implementation is very hard due to the complexity of processing elements interconnections. The proposed technique is based on constructing LDPC codes with less complex interconnections and with low impact on the error correction performance. This goal is achieved by putting a constraint on the maximum connection length between any two processing elements.

•Jan 1, 2008•0 citations

Performance improvement of short-length regular low-density parity-check codes with low-complexity post-processing

Raghunadh K. Bhattar, K.R. Ramakrishnan, K. S. Dasgupta

It is well known that extremely long low-density parity-check (LDPC) codes perform exceptionally well for error correction applications, short-length codes are preferable in practical applications. However, short-length LDPC codes suffer from performance degradation owing to graph-based impairments such as short cycles, trapping sets and stopping sets and so on in the bipartite graph of the LDPC matrix. In particular, performance degradation at moderate to high Eb/N0 is caused by the oscillations in bit node a posteriori probabilities induced by short cycles and trapping sets in bipartite graphs. In this study, a computationally efficient algorithm is proposed to improve the performance of short-length LDPC codes at moderate to high Eb/N0. This algorithm makes use of the information generated by the belief propagation (BP) algorithm in previous iterations before a decoding failure occurs. Using this information, a reliability-based estimation is performed on each bit node to supplement the BP algorithm. The proposed algorithm gives an appreciable coding gain as compared with BP decoding for LDPC codes of a code rate equal to or less than 1/2 rate coding. The coding gains are modest to significant in the case of optimised (for bipartite graph conditioning) regular LDPC codes, whereas the coding gains are huge in the case of unoptimised codes. Hence, this algorithm is useful for relaxing some stringent constraints on the graphical structure of the LDPC code and for developing hardware-friendly designs.

IET Communications•Oct 16, 2012•1 citation

Techniques for the decoding of low density parity check codes: efficient simulation, algorithm improvement and implementation

Babak Daneshrad, Enver Çavuş

After the introduction of iterative coding, Low Density Parity Check (LDPC) codes have received a lot of attention due to their remarkable near Shannon-limit performance and practical decoder implementation. However, when employing an LDPC code for various applications, multiple issues do arise at the simulation, algorithm and implementation levels. The first issue is the performance evaluation of the iterative LDPC decoder in the very low Bit Error Rate (BER) regions. So far, no analytical tool has been developed to evaluate the performance of LDPC codes. Unfortunately standard Monte Carlo (MC) simulations cannot be used for performance estimation in these low BER regions due to prohibitive execution times. The second issue is the efficiency of the decoding algorithm. Due to the presence of short cycles in the bipartite graph, sum-product decoding algorithms lead to considerable performance loss for short block-length LDPC codes and produce error floors for longer codes. In addition, the iterative processing and estimation of soft probabilistic values with these algorithms result in very high computational complexity, which in turn impedes the adoption of LDPC codes for power constrained systems. Another prime objective is to design a high throughput decoder architecture which is capable of supporting multiple rates and variable code lengths within minimal area. This work aims to address and provide solutions to the above problems. As a solution to the performance estimation problem of LDPC codes, a highly efficient and novel fast BER simulation technique is developed. At the algorithm level, a performance improvement and error floor avoidance method is introduced, and a computationally efficient algorithm is developed for the sum-product decoding of LDPC codes. And finally, at the architecture level, a high throughput multi-rate variable code length implementation is presented which, when implemented, efficiently minimizes device resources while alleviating the routing complexity of the decoder.

•Jan 1, 2007•2 citations

Low‐Density Parity‐Check Codes

Christian B. Schlegel, Lance C. Pérez

Low-density parity-check (LDPC) codes can rightfully take their stand next to turbo codes as the most powerful and most popular error control codes known. They offer a performance spectacularly close to theoretical limits when decoded using iterative soft decision algorithms. This chapter explores the properties and structure of low-density parity-check codes. It begins with the fundamental construction of regular LDPC codes and their representation as bipartite graphs. The graphical representation of LDPC codes then leads to the notion of irregular LDPC codes, which have been used to improve performance, and to the density evolution analysis technique, which predicts the performance of these codes.

Wiley eBooks•Aug 29, 2015•6 citations

Studies on Lowering the Error Floors of Finite Length LDPC codes

Huanlin Li

Low-density parity-check (LDPC) codes can approach the Shannon limit performance closely, and are becoming one of the most promising channel codes in the Error Control Coding area.The performance of an LDPC code with given length is mainly affected by the sizes of some combinatorial characteristics of its corresponding bipartite graph and the distribution of variable degrees and check node degrees.With the help of the density evolution algorithm, randomly designed LDPC codes, with carefully chosen degree distribution pairs, have been shown to achieve better Shannon capacity performance than their regular counterparts when decoded using the iterative belief propagation (BP) decoding algorithm.However, regular LDPC codes outperform their irregular counterparts in term of their error floors.Therefore, construction of LDPC codes which have both attractive error rate performance and low error floor performance has become an attractive topic.Currently, optimization of variable node degree distribution and check node degree distribution for an LDPC code with given length, which could help the code to achieve good Shannon limit performance, has been extensively studied.In this dissertation, we demonstrate some approaches of improving the error floor performance for a given LDPC code with desired degree distribution pair.The contribution mainly includes three parts.In the first part, the relationship between cycles and unfavorable combinatorial

•Jan 1, 2011•0 citations

Early Termination of BCH Codes Aided Iterative Decoding Algorithm for LDPC

Yongbo Wang

In conventional satellite broadcasting systems,e.g.DVB-S2,the error-correction schemes are often based on the concatenation of BCH and low-density parity-check(LDPC) codes,so as to obtain excellent bit error rate(BER) performance.As the inner codes,LDPC codes are traditionally decoded by iterative algorithms with many iteration cycles.In virtue of the concatenated structure of BCH and LDPC codes,a novel iterative decoding structure involving the embedment of BCH error-check function into each iterative cycle of LDPC is proposed.Computer simulations show that the iteration number of LDPC decoding with the proposed algorithm is obviously smaller than with traditional algorithm,thus greatly lowering the additional complexity of BCH error-check codes.Therefore,the total complexity and latency of the iterative decoding could be sufficiently reduced,while the similar system BER performance is maintained.

•Jan 1, 2011•0 citations
The decoding of Low-Density Parity-Check (LDPC) codes is operated over a redundant structure known as the bipartite graph, meaning that the full set of bit nodes is not absolutely necessary for decoder convergence. In 2008, Soyjaudah and Catherine designed a recovery algorithm for LDPC codes based on this assumption and showed that the error-correcting performance of their codes outperformed conventional LDPC Codes. In this work, the use of the recovery algorithm is further explored to test the performance of LDPC codes while the number of iterations is progressively increased. For experiments conducted with small blocklengths of up to 800 bits and number of iterations of up to 2000, the results interestingly demonstrate that contrary to conventional wisdom, the error-correcting performance keeps increasing with increasing number of iterations.
Low Density Parity Check (LDPC) codes are considered to be one of the best classes of error-correcting codes. This thesis deals with two major issues in LDPC codes: decoder design to enhance error correction performance and efficient decoder implementation. Five techniques have been introduced in this thesis. First, an efficient platform for LDPC code design and performance evaluation is developed. This platform implements parallel simulation algorithms to efficiently evaluate the performance of the proposed algorithms for LDPC decoders and code design. Second, an innovative technique is introduced to improve the performance of LDPC decoding in the error-floor region. Special structures in the code graph, called trapping sets, are considered to be the major source of decoding errors in the error-floor region. The proposed technique is based on eliminating the negative effect of trapping sets during LDPC decoding. As a third contribution, a novel approach to improve the decoder performance and/or throughput is introduced. This approach is based on utilizing LDPC decoder idle times by introducing two queues: one at the decoder input and the other at the decoder output. This architecture enables the decoder to run extra iterations beyond the conventional maximum allowable iterations. The fourth proposed technique reduces the bit error rate of LDPC decoders. This technique is based on tracking the number of failed parity check equations in the intermediate decoding iterations, rather than only relying on the final decoder output (after reaching the maximum number of iterations). The last proposed technique deals with the construction of interconnect efficient fully-parallel LDPC codes with high error correction performance. Fully-parallel implementation is very hard due to the complexity of processing elements interconnections. The proposed technique is based on constructing LDPC codes with less complex interconnections and with low impact on the error correction performance. This goal is achieved by putting a constraint on the maximum connection length between any two processing elements.
It is well known that extremely long low-density parity-check (LDPC) codes perform exceptionally well for error correction applications, short-length codes are preferable in practical applications. However, short-length LDPC codes suffer from performance degradation owing to graph-based impairments such as short cycles, trapping sets and stopping sets and so on in the bipartite graph of the LDPC matrix. In particular, performance degradation at moderate to high Eb/N0 is caused by the oscillations in bit node a posteriori probabilities induced by short cycles and trapping sets in bipartite graphs. In this study, a computationally efficient algorithm is proposed to improve the performance of short-length LDPC codes at moderate to high Eb/N0. This algorithm makes use of the information generated by the belief propagation (BP) algorithm in previous iterations before a decoding failure occurs. Using this information, a reliability-based estimation is performed on each bit node to supplement the BP algorithm. The proposed algorithm gives an appreciable coding gain as compared with BP decoding for LDPC codes of a code rate equal to or less than 1/2 rate coding. The coding gains are modest to significant in the case of optimised (for bipartite graph conditioning) regular LDPC codes, whereas the coding gains are huge in the case of unoptimised codes. Hence, this algorithm is useful for relaxing some stringent constraints on the graphical structure of the LDPC code and for developing hardware-friendly designs.
After the introduction of iterative coding, Low Density Parity Check (LDPC) codes have received a lot of attention due to their remarkable near Shannon-limit performance and practical decoder implementation. However, when employing an LDPC code for various applications, multiple issues do arise at the simulation, algorithm and implementation levels. The first issue is the performance evaluation of the iterative LDPC decoder in the very low Bit Error Rate (BER) regions. So far, no analytical tool has been developed to evaluate the performance of LDPC codes. Unfortunately standard Monte Carlo (MC) simulations cannot be used for performance estimation in these low BER regions due to prohibitive execution times. The second issue is the efficiency of the decoding algorithm. Due to the presence of short cycles in the bipartite graph, sum-product decoding algorithms lead to considerable performance loss for short block-length LDPC codes and produce error floors for longer codes. In addition, the iterative processing and estimation of soft probabilistic values with these algorithms result in very high computational complexity, which in turn impedes the adoption of LDPC codes for power constrained systems. Another prime objective is to design a high throughput decoder architecture which is capable of supporting multiple rates and variable code lengths within minimal area. This work aims to address and provide solutions to the above problems. As a solution to the performance estimation problem of LDPC codes, a highly efficient and novel fast BER simulation technique is developed. At the algorithm level, a performance improvement and error floor avoidance method is introduced, and a computationally efficient algorithm is developed for the sum-product decoding of LDPC codes. And finally, at the architecture level, a high throughput multi-rate variable code length implementation is presented which, when implemented, efficiently minimizes device resources while alleviating the routing complexity of the decoder.
Low-density parity-check (LDPC) codes can rightfully take their stand next to turbo codes as the most powerful and most popular error control codes known. They offer a performance spectacularly close to theoretical limits when decoded using iterative soft decision algorithms. This chapter explores the properties and structure of low-density parity-check codes. It begins with the fundamental construction of regular LDPC codes and their representation as bipartite graphs. The graphical representation of LDPC codes then leads to the notion of irregular LDPC codes, which have been used to improve performance, and to the density evolution analysis technique, which predicts the performance of these codes.
Low-density parity-check (LDPC) codes can approach the Shannon limit performance closely, and are becoming one of the most promising channel codes in the Error Control Coding area.The performance of an LDPC code with given length is mainly affected by the sizes of some combinatorial characteristics of its corresponding bipartite graph and the distribution of variable degrees and check node degrees.With the help of the density evolution algorithm, randomly designed LDPC codes, with carefully chosen degree distribution pairs, have been shown to achieve better Shannon capacity performance than their regular counterparts when decoded using the iterative belief propagation (BP) decoding algorithm.However, regular LDPC codes outperform their irregular counterparts in term of their error floors.Therefore, construction of LDPC codes which have both attractive error rate performance and low error floor performance has become an attractive topic.Currently, optimization of variable node degree distribution and check node degree distribution for an LDPC code with given length, which could help the code to achieve good Shannon limit performance, has been extensively studied.In this dissertation, we demonstrate some approaches of improving the error floor performance for a given LDPC code with desired degree distribution pair.The contribution mainly includes three parts.In the first part, the relationship between cycles and unfavorable combinatorial
In conventional satellite broadcasting systems,e.g.DVB-S2,the error-correction schemes are often based on the concatenation of BCH and low-density parity-check(LDPC) codes,so as to obtain excellent bit error rate(BER) performance.As the inner codes,LDPC codes are traditionally decoded by iterative algorithms with many iteration cycles.In virtue of the concatenated structure of BCH and LDPC codes,a novel iterative decoding structure involving the embedment of BCH error-check function into each iterative cycle of LDPC is proposed.Computer simulations show that the iteration number of LDPC decoding with the proposed algorithm is obviously smaller than with traditional algorithm,thus greatly lowering the additional complexity of BCH error-check codes.Therefore,the total complexity and latency of the iterative decoding could be sufficiently reduced,while the similar system BER performance is maintained.