Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Compensation of Incoherent Errors in the Precise Implementation of Effective Hamiltonians for Quantum Information Processing

Amro M. Farid

Published Oct 26, 2002• 0 citations
OpenAlex

Abstract

This thesis sets out to present an algorithm for compensation of incoherent errors in quantum information processing (QIP).In particular, it addresses the incoherent errors that arise from RF inhomogeneity in a liquid state NMR system.It briefly describes NMR's place in QIP experimental developments and explains the need to eliminate the errors introduced by RF inhomogeneity.An algorithm for compensation is proposed provided that one has prior knowledge of the system Hamiltonian and a measurement of the degree of RF inhomogeneity.The algorithm was used to create two sets of RF pulses; an uncompensated set that did not use the RF inhomogeneity measurement and a more robust set that did use the measurement.Simulation results indicate that all of the new pulses reduced the error by approximately an order of magnitude for the measured RF inhomgeneity, as well as for most other types of RF inhomogeneity.This result was verified in experiment, where correlations were improved by 0.024 on average.In total, errors due to RF inhomogeneity were reduced by a factor of six.

Related papers

Introduction to NMR Quantum Information Processing

Raymond Laflamme, Emanuel H. Knill, David G. Cory +11 more

After a general introduction to nuclear magnetic resonance (NMR), we give the basics of implementing quantum algorithms. We describe how qubits are realized and controlled with RF pulses, their internal interactions, and gradient fields. A peculiarity of NMR is that the internal interactions (given by the internal Hamiltonian) are always on. We discuss how they can be effectively turned off with the help of a standard NMR method called ``refocusing''. Liquid state NMR experiments are done at room temperature, leading to an extremely mixed (that is, nearly random) initial state. Despite this high degree of randomness, it is possible to investigate QIP because the relaxation time (the time scale over which useful signal from a computation is lost) is sufficiently long. We explain how this feature leads to the crucial ability of simulating a pure (non-random) state by using ``pseudopure'' states. We discuss how the ``answer'' provided by a computation is obtained by measurement and how this measurement differs from the ideal, projective measurement of QIP. We then give implementations of some simple quantum algorithms with a typical experimental result. We conclude with a discussion of what we have learned from NMR QIP so far and what the prospects for future NMR QIP experiments are.

arXiv:quant-ph/0207172•Jul 30, 2002•65 citations

Error characterization and quantum control benchmarking in liquid state NMR using quantum information processing techniques

Martin Laforest

Quantum information processing has been the subject of countless discoveries since the early 1990's. It is believed to be the way of the future for computation: using quantum systems permits one to perform computation exponentially faster than on a regular classical computer. Unfortunately, quantum systems that not isolated do not behave well. They tend to lose their quantum nature due to the presence of the environment. If key information is known about the noise present in the system, methods such as quantum error correction have been developed in order to reduce the errors introduced by the environment during a given quantum computation. In order to harness the quantum world and implement the theoretical ideas of quantum information processing and quantum error correction, it is imperative to understand and quantify the noise present in the quantum processor and benchmark the quality of the control over the qubits. Usual techniques to estimate the noise or the control are based on quantum process tomography (QPT), which, unfortunately, demands an exponential amount of resources. \n \nThis thesis presents work towards the characterization of noisy processes in an efficient manner. The protocols are developed from a purely abstract setting with no system-dependent variables. To circumvent the exponential nature of quantum process tomography, three different efficient protocols are proposed and experimentally verified. The first protocol uses the idea of quantum error correction to extract relevant parameters about a given noise model, namely the correlation between the dephasing of two qubits. Following that is a protocol using randomization and symmetrization to extract the probability that a given number of qubits are simultaneously corrupted in a quantum memory, regardless of the specifics of the error and which qubits are affected. Finally, a last protocol, still using randomization ideas, is developed to estimate the average fidelity per computational gates for single and multi qubit systems. \n \nEven though liquid state NMR is argued to be unsuitable for scalable quantum information processing, it remains the best test-bed system to experimentally implement, verify and develop protocols aimed at increasing the control over general quantum information processors. For this reason, all the protocols described in this thesis have been implemented in liquid state NMR, which then led to further development of control and analysis techniques.

•Sep 12, 2008•9 citations

Robust control of quantum information

Marco A. Pravia, Nicolas Boulant, Joseph Emerson +5 more

Errors in the control of quantum systems may be classified as unitary, decoherent, and incoherent. Unitary errors are systematic, and result in a density matrix that differs from the desired one by a unitary operation. Decoherent errors correspond to general completely positive superoperators, and can only be corrected using methods such as quantum error correction. Incoherent errors can also be described, on average, by completely positive superoperators, but can nevertheless be corrected by the application of a locally unitary operation that “refocuses” them. They are due to reproducible spatial or temporal variations in the system’s Hamiltonian, so that information on the variations is encoded in the system’s spatiotemporal state and can be used to correct them. In this paper liquid-state nuclear magnetic resonance is used to demonstrate that such refocusing effects can be built directly into the control fields, where the incoherence arises from spatial inhomogeneities in the quantizing static magnetic field as well as the radio-frequency control fields themselves. Using perturbation theory, it is further shown that the eigenvalue spectrum of the completely positive superoperator exhibits a characteristic spread that contains information on the Hamiltonians’ underlying distribution.

arXiv:quant-ph/0307062•The Journal of Chemical Physics•Oct 31, 2003•93 citations

Experimental demonstration of an entanglement swapping operation and improved control in NMR quantum-information processing

Nicolas Boulant, Karina Montilla Edmonds, Jerry Zhijian Yang +2 more

We demonstrate the implementation of an entanglement swapping operation on a four-qubit liquid-state nuclear-magnetic-resonance (NMR) quantum-information processor. We use this experiment as a benchmark to illustrate the progress made in the field of quantum control using strongly modulating pulses and a correction scheme for removing distortions introduced by the nonlinearities in the transmitter and probe circuits. The advances include compensating for incoherent errors caused by the spatial variation of the system Hamiltonian in the NMR sample. The goal of these control sequences is to cause the collapse of the Kraus operator-sum representation of the superoperator into one unitary operator so that the ensemble appears to evolve as one coherent whole.

Physical Review A•Sep 11, 2003•36 citations

Randomized benchmarking of single- and multi-qubit control in liquid-state NMR quantum information processing

Colm A. Ryan, M Laforest, R Laflamme

Being able to quantify the level of coherent control in a proposed device implementing a quantum information processor (QIP) is an important task for both comparing different devices and assessing a device's prospects with regards to achieving fault-tolerant quantum control. We implement in a liquid-state nuclear magnetic resonance QIP the randomized benchmarking protocol presented by Knill et al (2008 Phys. Rev. A 77 012307). We report an error per randomized π/2 pulse of 1.3±0.1 × 10 −4 with a single-qubit QIP and show an experimentally relevant error model where the randomized benchmarking gives a signature fidelity decay which is not possible to interpret as a single error per gate. We explore and experimentally investigate multi-qubit extensions of this protocol and report an average error rate for one- and two-qubit gates of 4.7±0.3 × 10 −3 for a three-qubit QIP. We estimate that these error rates are still not decoherence limited and thus can be improved with modifications to the control hardware and software.

arXiv:0808.3973•New Journal of Physics•Jan 23, 2009•125 citations

An Optimizing Pulse Sequence Compiler for NMR QIP

Pérez Delgado, Carlos Alberto Conceição António

Quantum information processing is a multi-disciplinary science involving physics, mathematics, computer science, and even quantum chemistry. It is centred around the idea of manipulating physical systems at the quantum level, either for simulation of physical systems, or numerical computation. Although it has been known for almost a decade that a quantum computer would enable the solution of problems deemed infeasible classically, constructing one has been beyond today's capabilities. In this work we explore one proposed implementation of a quantum computer: Nuclear Magnetic Resonance (NMR) spectroscopy. We also develop a numerical software tool, a pulse sequence compiler, for use in the implementation of quantum computer programs on an NMR quantum computer. Our pulse sequence compiler takes as input the specifications of the molecule used as a quantum register, the desired quantum gate, and experimental data on the actual effects of RF pulses on a sample of the molecule, and outputs an optimum set of pre and post 'virtual' gates that minimize the error induced.

•Jan 1, 2003•0 citations
This thesis sets out to present an algorithm for compensation of incoherent errors in quantum information processing (QIP).In particular, it addresses the incoherent errors that arise from RF inhomogeneity in a liquid state NMR system.It briefly describes NMR's place in QIP experimental developments and explains the need to eliminate the errors introduced by RF inhomogeneity.An algorithm for compensation is proposed provided that one has prior knowledge of the system Hamiltonian and a measurement of the degree of RF inhomogeneity.The algorithm was used to create two sets of RF pulses; an uncompensated set that did not use the RF inhomogeneity measurement and a more robust set that did use the measurement.Simulation results indicate that all of the new pulses reduced the error by approximately an order of magnitude for the measured RF inhomgeneity, as well as for most other types of RF inhomogeneity.This result was verified in experiment, where correlations were improved by 0.024 on average.In total, errors due to RF inhomogeneity were reduced by a factor of six.
After a general introduction to nuclear magnetic resonance (NMR), we give the basics of implementing quantum algorithms. We describe how qubits are realized and controlled with RF pulses, their internal interactions, and gradient fields. A peculiarity of NMR is that the internal interactions (given by the internal Hamiltonian) are always on. We discuss how they can be effectively turned off with the help of a standard NMR method called ``refocusing''. Liquid state NMR experiments are done at room temperature, leading to an extremely mixed (that is, nearly random) initial state. Despite this high degree of randomness, it is possible to investigate QIP because the relaxation time (the time scale over which useful signal from a computation is lost) is sufficiently long. We explain how this feature leads to the crucial ability of simulating a pure (non-random) state by using ``pseudopure'' states. We discuss how the ``answer'' provided by a computation is obtained by measurement and how this measurement differs from the ideal, projective measurement of QIP. We then give implementations of some simple quantum algorithms with a typical experimental result. We conclude with a discussion of what we have learned from NMR QIP so far and what the prospects for future NMR QIP experiments are.
Quantum information processing has been the subject of countless discoveries since the early 1990's. It is believed to be the way of the future for computation: using quantum systems permits one to perform computation exponentially faster than on a regular classical computer. Unfortunately, quantum systems that not isolated do not behave well. They tend to lose their quantum nature due to the presence of the environment. If key information is known about the noise present in the system, methods such as quantum error correction have been developed in order to reduce the errors introduced by the environment during a given quantum computation. In order to harness the quantum world and implement the theoretical ideas of quantum information processing and quantum error correction, it is imperative to understand and quantify the noise present in the quantum processor and benchmark the quality of the control over the qubits. Usual techniques to estimate the noise or the control are based on quantum process tomography (QPT), which, unfortunately, demands an exponential amount of resources. \n \nThis thesis presents work towards the characterization of noisy processes in an efficient manner. The protocols are developed from a purely abstract setting with no system-dependent variables. To circumvent the exponential nature of quantum process tomography, three different efficient protocols are proposed and experimentally verified. The first protocol uses the idea of quantum error correction to extract relevant parameters about a given noise model, namely the correlation between the dephasing of two qubits. Following that is a protocol using randomization and symmetrization to extract the probability that a given number of qubits are simultaneously corrupted in a quantum memory, regardless of the specifics of the error and which qubits are affected. Finally, a last protocol, still using randomization ideas, is developed to estimate the average fidelity per computational gates for single and multi qubit systems. \n \nEven though liquid state NMR is argued to be unsuitable for scalable quantum information processing, it remains the best test-bed system to experimentally implement, verify and develop protocols aimed at increasing the control over general quantum information processors. For this reason, all the protocols described in this thesis have been implemented in liquid state NMR, which then led to further development of control and analysis techniques.
Errors in the control of quantum systems may be classified as unitary, decoherent, and incoherent. Unitary errors are systematic, and result in a density matrix that differs from the desired one by a unitary operation. Decoherent errors correspond to general completely positive superoperators, and can only be corrected using methods such as quantum error correction. Incoherent errors can also be described, on average, by completely positive superoperators, but can nevertheless be corrected by the application of a locally unitary operation that “refocuses” them. They are due to reproducible spatial or temporal variations in the system’s Hamiltonian, so that information on the variations is encoded in the system’s spatiotemporal state and can be used to correct them. In this paper liquid-state nuclear magnetic resonance is used to demonstrate that such refocusing effects can be built directly into the control fields, where the incoherence arises from spatial inhomogeneities in the quantizing static magnetic field as well as the radio-frequency control fields themselves. Using perturbation theory, it is further shown that the eigenvalue spectrum of the completely positive superoperator exhibits a characteristic spread that contains information on the Hamiltonians’ underlying distribution.
We demonstrate the implementation of an entanglement swapping operation on a four-qubit liquid-state nuclear-magnetic-resonance (NMR) quantum-information processor. We use this experiment as a benchmark to illustrate the progress made in the field of quantum control using strongly modulating pulses and a correction scheme for removing distortions introduced by the nonlinearities in the transmitter and probe circuits. The advances include compensating for incoherent errors caused by the spatial variation of the system Hamiltonian in the NMR sample. The goal of these control sequences is to cause the collapse of the Kraus operator-sum representation of the superoperator into one unitary operator so that the ensemble appears to evolve as one coherent whole.
Being able to quantify the level of coherent control in a proposed device implementing a quantum information processor (QIP) is an important task for both comparing different devices and assessing a device's prospects with regards to achieving fault-tolerant quantum control. We implement in a liquid-state nuclear magnetic resonance QIP the randomized benchmarking protocol presented by Knill et al (2008 Phys. Rev. A 77 012307). We report an error per randomized π/2 pulse of 1.3±0.1 × 10 −4 with a single-qubit QIP and show an experimentally relevant error model where the randomized benchmarking gives a signature fidelity decay which is not possible to interpret as a single error per gate. We explore and experimentally investigate multi-qubit extensions of this protocol and report an average error rate for one- and two-qubit gates of 4.7±0.3 × 10 −3 for a three-qubit QIP. We estimate that these error rates are still not decoherence limited and thus can be improved with modifications to the control hardware and software.
Quantum information processing is a multi-disciplinary science involving physics, mathematics, computer science, and even quantum chemistry. It is centred around the idea of manipulating physical systems at the quantum level, either for simulation of physical systems, or numerical computation. Although it has been known for almost a decade that a quantum computer would enable the solution of problems deemed infeasible classically, constructing one has been beyond today's capabilities. In this work we explore one proposed implementation of a quantum computer: Nuclear Magnetic Resonance (NMR) spectroscopy. We also develop a numerical software tool, a pulse sequence compiler, for use in the implementation of quantum computer programs on an NMR quantum computer. Our pulse sequence compiler takes as input the specifications of the molecule used as a quantum register, the desired quantum gate, and experimental data on the actual effects of RF pulses on a sample of the molecule, and outputs an optimum set of pre and post 'virtual' gates that minimize the error induced.