Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Feedback Control ofLinear QuantumSystems

Andrew C. Doherty

Published Jan 1, 2005• 0 citations
OpenAlex

Abstract

Wecompare quantum andclassical feedback control oflinear systems, investigating the effect ofback-action noise oncontrol performance. Oneconsequence istheexistence ofan optimal measurement forfixed system-environment coupling. ©2005 Optical Society ofAmerica OCIScodes: (270.5570) Quantum detectors; (270.250) Fluctuations, relaxations andnoise. 1.Introduction andBackground Experiments inoptical andatomic physics areincreasingly able tomakemeasurements onindividual quantum systems with signal tonoise atornearthequantum limit. Since quantum measurements irreducibly disturb the system, feedback control loops containing such quantum-limited sensors musttake this back-action noise into account incontroller design. Asaconsequence thestudy ofquantum feedback control hasbeen developing rapidly inrecent years, both intheory andnotably inquantum optics experiments (1-3). Linear quantum systems arethose forwhich theHeisenberg equations ofmotion for thecanonical positions and momenta (and hence also theequations fortheir expectation values) arelinear. WithGaussian initial conditions the equations ofmotion forthemeanvalues andcovariance matrix form aclosed system andpropagate sufficient statistics forthefull quantum state. This immensely simplifies theanalysis andmakes itpossible toutilize and compare toresults inclassical control theory forlinear systems with Gaussian noises, theso-called Linear- Quadratic-Gaussian

Related papers

Quantum limits to feedback control of linear systems

Andrew C. Doherty, Howard M. Wiseman

In many optical and atomic systems it is now possible to monitor an individual quantum system with high signal to noise and feed back by altering the system dynamics in real time. This motivates further development of quantum mechanical descriptions of feedback control. We discuss recent work on closed loop control of open quantum systems, focusing on general linear systems for which the statistics of the problem are Gaussian. Such systems may be realized with linear optics, parametric amplifiers and homodyne detection. This problem allows a direct comparison with the classical linear, quadratic cost, Gaussian noise (LQG) optimal control problem. This highlights the key distinction between the quantum and classical theories for linear systems: that increased measurement sensitivity may run counter to the control objectives since it increases the backaction noise. While in an idealized classical control problem it is always preferable to obtain a better sensor, quantum mechanical problems generically have an optimal sensitivity since quantum mechanical measurements irreducibly disturb the system. The general theory will be illustrated by reference to specific simple examples.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•May 25, 2004•1 citation

Feedback control of linear quantum systems

Andrew C. Doherty, Howard M. Wiseman

We compare quantum and classical feedback control of linear systems, investigating the effect of back-action noise on control performance. One consequence is the existence of an optimal measurement for fixed system-environment coupling.

Quantum Electronics and Laser Science Conference•Dec 10, 2005•3 citations

Feedback control of quantum systems : modelling, stabilisation and estimation

Zibo Miao

Quantum engineering has seen rapid growth in the past two decades. Physicists, mathematicians and engineers have been working in unison to control a number of diverse systems in the quantum regime. Quantum control involving feedback has become particularly topical, as using information gained from a system can lead to more stable operation of a control protocol. Quantum feedback can be split into two paradigms: measurement based feedback and coherent feedback. Although it is increasingly evident that retaining the coherence of the feedback signal provides an intrinsic advantage over measurement-based feedback, coherent feedback is still a new paradigm. In particular, there are a limited number of options for coherently estimating a state within a feedback loop. As a step towards better understanding and implementation of quantum feedback, this thesis reports on modelling, estimation and control of quantum systems. The first topic is physical realisability of a variety of quantum systems, especially finite level systems and their outgrowths. Bilinear quantum stochastic differential equations (QSDEs) have to be employed to characterise these systems, which is a significant complement to the previous work on linear QSDEs. In light of the fact that direct and indirect couplings play a vital role in quantum network and control, we also provide state-space models for different classes of coupled open quantum systems incorporating both bidirectional and directional interactions. The second topic is coherent observers and optimal filtering. It is well established that classically estimation using the Kalman filter can provide improved performance over direct feedback schemes, and similar demonstrations have been performed for measurement-based quantum feedback. In this thesis I present coherent observers, including least mean squares estimators, which are driven by the coherent output of a specified quantum plant and designed such that some subset of the observer and plant's expectation values converge in the asymptotic limit. Not only can estimators "observe" mean quantities of quantum plant, but also they can "estimate" quantum correlations such as entanglement. This is of much importance to coherent feedback design in the absence of measurement steps without loss of fidelity. Last but not least, several topics regarding stabilisation and control design of quantum systems are discussed in my thesis. To be specific, tools for quantum stability analysis (e.g. Lyapunov conditions) are provided. Both measurement-based feedback and coherent feedback control design are taken into account. A measurement-based optimal controller for opto-mechanical systems aimed at synchronising different mechanical modes is presented, which is application-oriented. Moreover, A general observer-based coherent feedback control framework is studied, and I demonstrate a pole-placement approach via coherent observers that can be applied to various scenarios.

•Jan 1, 2015•0 citations

Linear quantum systems: A tutorial

Guofeng Zhang, Zhiyuan Dong

The purpose of this tutorial is to give a brief introduction to linear quantum control systems. The mathematical model of linear quantum control systems is presented first, then some fundamental control-theoretic notions such as stability, controllability and observability are given, which are closely related to several important concepts in quantum information science such as decoherence-free subsystems, quantum non-demolition variables, and back-action evasion measurements. After that, quantum Gaussian states are introduced, in particular, an information-theoretic uncertainty relation is presented which often gives a better bound for mixed Gaussian states than the well-known Heisenberg uncertainty relation. The quantum Kalman filter is presented for quantum linear systems, which is the quantum analogy of the Kalman filter for classical (namely, non-quantum-mechanical) linear systems. The quantum Kalman canonical decomposition for quantum linear systems is recorded, and its application is illustrated by means of a recent experiment. As single- and multi-photon states are useful resources in quantum information technology, the response of quantum linear systems to these types of input is presented. Finally, coherent feedback control of quantum linear systems is briefly introduced, and a recent experiment is used to demonstrate the effectiveness of quantum linear systems and networks theory.

arXiv:2205.04080•Annual Reviews in Control•Jan 1, 2022•46 citations

Optimal Unravellings for Feedback Control in Linear Quantum Systems

Howard M. Wiseman, Andrew C. Doherty

For quantum systems with linear dynamics in phase space much of classical feedback control theory applies. However, there are some questions that are sensible only for the quantum case: Given a fixed interaction between the system and the environment what is the optimal measurement on the environment for a particular control problem? We show that for a broad class of optimal (state-based) control problems (the stationary linear-quadratic-Gaussian class), this question is a semidefinite program. Moreover, the answer also applies to Markovian (current-based) feedback.

arXiv:quant-ph/0408099•Physical Review Letters•Feb 25, 2005•148 citations

Open quantum systems with linear dynamics: optimal unravellings for optimal feedback control

Howard M. Wiseman, Andrew C. Doherty

Quantum feedback control is the control of the dynamics of a quantum system by feeding back (in real time) the results of monitoring that system. For systems with linear dynamics, the control problem is amenable to exact analysis. In these cases, the quantum system is equivalent to a stochastic system of classical phase-space variables with linear drift and constant diffusion, and with a measured current (e.g. a homodyne photocurrent) linear in the system variables. However, the classical evolution is constrained in order to represent valid quantum evolution. We quantify this in terms of a linear matrix inequality (LMI) relating the drift and diffusion (a sort of zero temperature fluctuation-dissipation theorem), and another LMI for the covariance matrix of the possible conditioned states (i.e. under all possible monitoring schemes consistent with the master equation). For manipulable systems (i.e. where the experimenter has arbitrary control over the parameters in a Hamiltonian linear in the system variables) the covariance of the conditioned state is all that is needed to calculate the effectiveness of the feedback. In this case the double optimization problem reduces to a semidefinite program, which can be solved efficiently in general. We illustrate this with an example drawn from quantum optics.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•May 25, 2004•0 citations
Wecompare quantum andclassical feedback control oflinear systems, investigating the effect ofback-action noise oncontrol performance. Oneconsequence istheexistence ofan optimal measurement forfixed system-environment coupling. ©2005 Optical Society ofAmerica OCIScodes: (270.5570) Quantum detectors; (270.250) Fluctuations, relaxations andnoise. 1.Introduction andBackground Experiments inoptical andatomic physics areincreasingly able tomakemeasurements onindividual quantum systems with signal tonoise atornearthequantum limit. Since quantum measurements irreducibly disturb the system, feedback control loops containing such quantum-limited sensors musttake this back-action noise into account incontroller design. Asaconsequence thestudy ofquantum feedback control hasbeen developing rapidly inrecent years, both intheory andnotably inquantum optics experiments (1-3). Linear quantum systems arethose forwhich theHeisenberg equations ofmotion for thecanonical positions and momenta (and hence also theequations fortheir expectation values) arelinear. WithGaussian initial conditions the equations ofmotion forthemeanvalues andcovariance matrix form aclosed system andpropagate sufficient statistics forthefull quantum state. This immensely simplifies theanalysis andmakes itpossible toutilize and compare toresults inclassical control theory forlinear systems with Gaussian noises, theso-called Linear- Quadratic-Gaussian
In many optical and atomic systems it is now possible to monitor an individual quantum system with high signal to noise and feed back by altering the system dynamics in real time. This motivates further development of quantum mechanical descriptions of feedback control. We discuss recent work on closed loop control of open quantum systems, focusing on general linear systems for which the statistics of the problem are Gaussian. Such systems may be realized with linear optics, parametric amplifiers and homodyne detection. This problem allows a direct comparison with the classical linear, quadratic cost, Gaussian noise (LQG) optimal control problem. This highlights the key distinction between the quantum and classical theories for linear systems: that increased measurement sensitivity may run counter to the control objectives since it increases the backaction noise. While in an idealized classical control problem it is always preferable to obtain a better sensor, quantum mechanical problems generically have an optimal sensitivity since quantum mechanical measurements irreducibly disturb the system. The general theory will be illustrated by reference to specific simple examples.
Quantum engineering has seen rapid growth in the past two decades. Physicists, mathematicians and engineers have been working in unison to control a number of diverse systems in the quantum regime. Quantum control involving feedback has become particularly topical, as using information gained from a system can lead to more stable operation of a control protocol. Quantum feedback can be split into two paradigms: measurement based feedback and coherent feedback. Although it is increasingly evident that retaining the coherence of the feedback signal provides an intrinsic advantage over measurement-based feedback, coherent feedback is still a new paradigm. In particular, there are a limited number of options for coherently estimating a state within a feedback loop. As a step towards better understanding and implementation of quantum feedback, this thesis reports on modelling, estimation and control of quantum systems. The first topic is physical realisability of a variety of quantum systems, especially finite level systems and their outgrowths. Bilinear quantum stochastic differential equations (QSDEs) have to be employed to characterise these systems, which is a significant complement to the previous work on linear QSDEs. In light of the fact that direct and indirect couplings play a vital role in quantum network and control, we also provide state-space models for different classes of coupled open quantum systems incorporating both bidirectional and directional interactions. The second topic is coherent observers and optimal filtering. It is well established that classically estimation using the Kalman filter can provide improved performance over direct feedback schemes, and similar demonstrations have been performed for measurement-based quantum feedback. In this thesis I present coherent observers, including least mean squares estimators, which are driven by the coherent output of a specified quantum plant and designed such that some subset of the observer and plant's expectation values converge in the asymptotic limit. Not only can estimators "observe" mean quantities of quantum plant, but also they can "estimate" quantum correlations such as entanglement. This is of much importance to coherent feedback design in the absence of measurement steps without loss of fidelity. Last but not least, several topics regarding stabilisation and control design of quantum systems are discussed in my thesis. To be specific, tools for quantum stability analysis (e.g. Lyapunov conditions) are provided. Both measurement-based feedback and coherent feedback control design are taken into account. A measurement-based optimal controller for opto-mechanical systems aimed at synchronising different mechanical modes is presented, which is application-oriented. Moreover, A general observer-based coherent feedback control framework is studied, and I demonstrate a pole-placement approach via coherent observers that can be applied to various scenarios.
The purpose of this tutorial is to give a brief introduction to linear quantum control systems. The mathematical model of linear quantum control systems is presented first, then some fundamental control-theoretic notions such as stability, controllability and observability are given, which are closely related to several important concepts in quantum information science such as decoherence-free subsystems, quantum non-demolition variables, and back-action evasion measurements. After that, quantum Gaussian states are introduced, in particular, an information-theoretic uncertainty relation is presented which often gives a better bound for mixed Gaussian states than the well-known Heisenberg uncertainty relation. The quantum Kalman filter is presented for quantum linear systems, which is the quantum analogy of the Kalman filter for classical (namely, non-quantum-mechanical) linear systems. The quantum Kalman canonical decomposition for quantum linear systems is recorded, and its application is illustrated by means of a recent experiment. As single- and multi-photon states are useful resources in quantum information technology, the response of quantum linear systems to these types of input is presented. Finally, coherent feedback control of quantum linear systems is briefly introduced, and a recent experiment is used to demonstrate the effectiveness of quantum linear systems and networks theory.
For quantum systems with linear dynamics in phase space much of classical feedback control theory applies. However, there are some questions that are sensible only for the quantum case: Given a fixed interaction between the system and the environment what is the optimal measurement on the environment for a particular control problem? We show that for a broad class of optimal (state-based) control problems (the stationary linear-quadratic-Gaussian class), this question is a semidefinite program. Moreover, the answer also applies to Markovian (current-based) feedback.
Quantum feedback control is the control of the dynamics of a quantum system by feeding back (in real time) the results of monitoring that system. For systems with linear dynamics, the control problem is amenable to exact analysis. In these cases, the quantum system is equivalent to a stochastic system of classical phase-space variables with linear drift and constant diffusion, and with a measured current (e.g. a homodyne photocurrent) linear in the system variables. However, the classical evolution is constrained in order to represent valid quantum evolution. We quantify this in terms of a linear matrix inequality (LMI) relating the drift and diffusion (a sort of zero temperature fluctuation-dissipation theorem), and another LMI for the covariance matrix of the possible conditioned states (i.e. under all possible monitoring schemes consistent with the master equation). For manipulable systems (i.e. where the experimenter has arbitrary control over the parameters in a Hamiltonian linear in the system variables) the covariance of the conditioned state is all that is needed to calculate the effectiveness of the feedback. In this case the double optimization problem reduces to a semidefinite program, which can be solved efficiently in general. We illustrate this with an example drawn from quantum optics.