Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Journal of Micromechanics and Microengineering

Etching techniques for realizing optical micro-cavity atom traps on silicon

Z. Moktadir, E Koukharenka, Michael D. Kraft, Darren M. Bagnall, Hugh N. Powell, M. P. A. Jones, Edward A. Hinds

Published Aug 21, 2004• 26 citations
Publisher

Abstract

We have fabricated curved optical micromirrors on silicon. We expect to be able to form open optical cavities between these mirrors and plane mirrors coated on the ends of optical fibres. The curved mirror templates have been prepared with less than 10 nm surface roughness by means of isotropic chemical etching. Two different methods are used for the fabrication of the mirrors: the first method uses a silicon oxide mask, while the second uses dry etching to form an indentation in the silicon surface that is opened out by wet isotropic etching. After coating the silicon substrate with gold, good quality mirrors are obtained with R ∼ 98% in the near infra-red. We find that a reflectivity of approximately 98% can be achieved by this method. Cavities formed from these mirrors will be useful for manipulating single atoms.

DOI
10.1088/0960-1317/14/9/014

Related papers

Ultrasmooth microfabricated mirrors for quantum information

Grant W. Biedermann, Francisco Benito, Kevin Fortier +6 more

In this paper, we realize a scalable micromirror suitable for atom chip based cavity quantum electrodynamics applications. A very low surface roughness of 2.2 Å rms on the silicon cavity mirrors is achieved using chemical dry etching along with plasma and oxidation smoothing. Our Fabry–Perot cavity comprised of these mirrors currently demonstrates the highest finesse, F=64 000, using microfabricated mirrors. We compute a single atom cooperativity for our cavities of more than 200, making them promising candidates for detecting individual atoms and for quantum information applications on a chip.

Applied Physics Letters•Nov 1, 2010•30 citations

Towards an integrated atom chip

G. Lewis

The field of atom chips is a relatively new area of research which is rapidly becoming of great interest to the scientific community. It started out as a small branch of cold atom physics which has quickly grown into a multidisciplinary\nsubject. It now encompasses topics from fundamental atomic and quantum theory, optics and laser science, to the engineering of ultra sensitive sensors.\n\nIn this thesis the first steps are taken towards a truly integrated atom chip device for real world applications. Multiple devices are presented that allow the trapping, cooling, manipulation and counting of atoms. Each device presents a new component required for the integration and miniaturisation of atom chips\ninto a single device, capable of being used as a sensor.\n\nInitially, a wire trap was created capable of trapping and splitting a cloud of BoseEinstein condensate (BEC) for use in atom interferometry. Using this chip a BEC has been successfully created, trapped and coherent splitting of this cloud has been achieved.\n\nSubsequently, the integration and simplification of the initial trapping process was approached. In all the experiments to date, atoms are initially collected from a warm vapour by a magneto-optical trap (MOT). This thesis presents a new approach in which microscopic pyramidal MOTs’ are integrated into the chip itself. This greatly reduces the number of optical components and helps to simplify the process significantly.\n\nAlso presented is a method for creating a planar-concave micro-cavity capable of single atom detection. One such cavity consists of a concave mirror fabricated in silicon and the planar tip of an optical fibre. The performance of the resonators\nis highly dependent on the surface roughness and shape profile of the concave mirrors therefore a detailed study into the fabrication technique and its effects on these parameters was undertaken. Using such cavities single atom detection has been shown to be possible. These cavities have also been sccessfully integrated into an atom wire guide.\n\nFinally a co-sputtered amorphous silicon/titanium (a-Si/Ti) nanocomposite material was created and studied for its use as a novel structural material. This material is potentially suitable for integrated circuitry (IC)/Micro-electromechanical-\nsystems (MEMS) integration. The material’s electrical and\nstructural properties were investigated and initial results suggest that a-Si/Ti has the potential to be a compelling structural material for future IC/MEMS integration.\n\nTo build all of these devices, a full range of standard microfabrication techniques was necessary as well as some non standard processes that required considerable process development such as the electrochemical deposition.\n\nThis thesis presents a tool box of fabrication techniques for creating various components capable of different tasks that can be integrated into a single device. Each component has been successfully demonstrated in laboratory conditions. This represents a significant step toward a real world atom chip device.

•Mar 1, 2009•0 citations

Design and characterization of an integrated surface ion trap and micromirror optical cavity

Andre J. Van Rynbach, George Schwartz, Robert Spivey +3 more

We have fabricated and characterized laser-ablated micromirrors on fused silica substrates for constructing stable Fabry–Perot optical cavities. We highlight several design features which allow these cavities to have lengths in the 250–300 μm range and be integrated directly with surface ion traps. We present a method to calculate the optical mode shape and losses of these micromirror cavities as functions of cavity length and mirror shape, and confirm that our simulation model is in good agreement with experimental measurements of the intracavity optical mode at a test wavelength of 780 nm. We have designed and tested a mechanical setup for dampening vibrations and stabilizing the cavity length, and explore applications for these cavities as efficient single-photon sources when combined with trapped Yb171+ ions.

Applied Optics•Aug 3, 2017•1 citation

Monolithic Ion Trap Integrated with a Micro Optical Cavity for Quantum Networks

Shaobo Gao, Soon Teh, Ezra Kassa +1 more

Monolithic fabrication of ion traps integrated with a micro optical cavity is the building block for large scale ion trap quantum network. The authors designed such traps and successfully trapped single ions. Cavity mirrors with the desired shape and quality are fabricated on optical fibre tips robustly.

Microoptics Conference•Sep 24, 2023•0 citations

Fabrication of glass micro-cavities for cavity quantum electrodynamics experiments

Arpan Roy, Murray D. Barrett

We report a process for fabricating high quality, defect-free spherical mirror templates suitable for developing high finesse optical Fabry-Perot resonators. The process utilizes the controlled re-flow of borosilicate glass and differential pressure to produce mirrors with 0.3 nm surface roughness. The dimensions of the mirrors are in the 0.5–5 mm range making them suitable candidates for integration with on-chip neutral atom and ion experiments where enhanced interaction between atoms and photons is required. Cavities constructed with these mirror templates are well suited to quantum information applications such as single photon sources and atom-photon entanglement.

arXiv:1108.2087•Applied Physics Letters•Oct 24, 2011•11 citations

Optical cavities for quantum information processing with trapped neutral atoms

Thomas H. Doherty

A leading strategy for the creation of a scalable quantum computer is through a networked architecture. This would comprise stationary nodes for quantum information processing and photonic channels for their communication and entanglement distribution. In this scheme a coherent interface between light and matter is a critical component, facilitating the deterministic and reversible transfer of quantum information between stationary and travelling qubits. This requirement may be fulfilled by a high finesse optical cavity, whose radiation field is strongly coupled to a trapped quantised emitter. Neutral atoms are an ideal species for the development of such a device, given their inherent compatibility with dielectric mirror surfaces. However, an outstanding challenge in building an elementary network of neutral atom-cavity systems is in establishing a single atom dipole trap within each cavity mode. This thesis presents the development of an open-access cavity suitable for single atom localisation, whilst maintaining strong atom-cavity coupling, {g0,κ,γ} = {11,2.1,3} × 2πMHz, and the efficient extraction of generated photons, η=0.5. We consider cavity design methodology, deriving a connection between the physical properties of the optical resonator and its intended role in the production of single photons. An experimental platform is developed for the creation of cavity mirrors by laser ablation, with a high degree of geometrical control. This is used to produce a set of pyramidal micro-mirrors, demonstrated to represent a favourable alternative to the widespread adoption of fibre-tip cavities. These pyramidal mirrors are shown to support multi-feature resonators, allowing several atom-cavity interfaces to be formed using a pair of substrates. By developing a novel procedure for mirror alignment, a hybrid mirror cavity is fabricated and integrated into an experimental architecture tailored for atomic trapping. Suitability of the cavity for future experimentation is demonstrated by frequency stabilisation to an atomic resonance of 87Rb.

•Jan 1, 2021•0 citations
We have fabricated curved optical micromirrors on silicon. We expect to be able to form open optical cavities between these mirrors and plane mirrors coated on the ends of optical fibres. The curved mirror templates have been prepared with less than 10 nm surface roughness by means of isotropic chemical etching. Two different methods are used for the fabrication of the mirrors: the first method uses a silicon oxide mask, while the second uses dry etching to form an indentation in the silicon surface that is opened out by wet isotropic etching. After coating the silicon substrate with gold, good quality mirrors are obtained with R ∼ 98% in the near infra-red. We find that a reflectivity of approximately 98% can be achieved by this method. Cavities formed from these mirrors will be useful for manipulating single atoms.
In this paper, we realize a scalable micromirror suitable for atom chip based cavity quantum electrodynamics applications. A very low surface roughness of 2.2 Å rms on the silicon cavity mirrors is achieved using chemical dry etching along with plasma and oxidation smoothing. Our Fabry–Perot cavity comprised of these mirrors currently demonstrates the highest finesse, F=64 000, using microfabricated mirrors. We compute a single atom cooperativity for our cavities of more than 200, making them promising candidates for detecting individual atoms and for quantum information applications on a chip.
The field of atom chips is a relatively new area of research which is rapidly becoming of great interest to the scientific community. It started out as a small branch of cold atom physics which has quickly grown into a multidisciplinary\nsubject. It now encompasses topics from fundamental atomic and quantum theory, optics and laser science, to the engineering of ultra sensitive sensors.\n\nIn this thesis the first steps are taken towards a truly integrated atom chip device for real world applications. Multiple devices are presented that allow the trapping, cooling, manipulation and counting of atoms. Each device presents a new component required for the integration and miniaturisation of atom chips\ninto a single device, capable of being used as a sensor.\n\nInitially, a wire trap was created capable of trapping and splitting a cloud of BoseEinstein condensate (BEC) for use in atom interferometry. Using this chip a BEC has been successfully created, trapped and coherent splitting of this cloud has been achieved.\n\nSubsequently, the integration and simplification of the initial trapping process was approached. In all the experiments to date, atoms are initially collected from a warm vapour by a magneto-optical trap (MOT). This thesis presents a new approach in which microscopic pyramidal MOTs’ are integrated into the chip itself. This greatly reduces the number of optical components and helps to simplify the process significantly.\n\nAlso presented is a method for creating a planar-concave micro-cavity capable of single atom detection. One such cavity consists of a concave mirror fabricated in silicon and the planar tip of an optical fibre. The performance of the resonators\nis highly dependent on the surface roughness and shape profile of the concave mirrors therefore a detailed study into the fabrication technique and its effects on these parameters was undertaken. Using such cavities single atom detection has been shown to be possible. These cavities have also been sccessfully integrated into an atom wire guide.\n\nFinally a co-sputtered amorphous silicon/titanium (a-Si/Ti) nanocomposite material was created and studied for its use as a novel structural material. This material is potentially suitable for integrated circuitry (IC)/Micro-electromechanical-\nsystems (MEMS) integration. The material’s electrical and\nstructural properties were investigated and initial results suggest that a-Si/Ti has the potential to be a compelling structural material for future IC/MEMS integration.\n\nTo build all of these devices, a full range of standard microfabrication techniques was necessary as well as some non standard processes that required considerable process development such as the electrochemical deposition.\n\nThis thesis presents a tool box of fabrication techniques for creating various components capable of different tasks that can be integrated into a single device. Each component has been successfully demonstrated in laboratory conditions. This represents a significant step toward a real world atom chip device.
We have fabricated and characterized laser-ablated micromirrors on fused silica substrates for constructing stable Fabry–Perot optical cavities. We highlight several design features which allow these cavities to have lengths in the 250–300 μm range and be integrated directly with surface ion traps. We present a method to calculate the optical mode shape and losses of these micromirror cavities as functions of cavity length and mirror shape, and confirm that our simulation model is in good agreement with experimental measurements of the intracavity optical mode at a test wavelength of 780 nm. We have designed and tested a mechanical setup for dampening vibrations and stabilizing the cavity length, and explore applications for these cavities as efficient single-photon sources when combined with trapped Yb171+ ions.
We report a process for fabricating high quality, defect-free spherical mirror templates suitable for developing high finesse optical Fabry-Perot resonators. The process utilizes the controlled re-flow of borosilicate glass and differential pressure to produce mirrors with 0.3 nm surface roughness. The dimensions of the mirrors are in the 0.5–5 mm range making them suitable candidates for integration with on-chip neutral atom and ion experiments where enhanced interaction between atoms and photons is required. Cavities constructed with these mirror templates are well suited to quantum information applications such as single photon sources and atom-photon entanglement.
A leading strategy for the creation of a scalable quantum computer is through a networked architecture. This would comprise stationary nodes for quantum information processing and photonic channels for their communication and entanglement distribution. In this scheme a coherent interface between light and matter is a critical component, facilitating the deterministic and reversible transfer of quantum information between stationary and travelling qubits. This requirement may be fulfilled by a high finesse optical cavity, whose radiation field is strongly coupled to a trapped quantised emitter. Neutral atoms are an ideal species for the development of such a device, given their inherent compatibility with dielectric mirror surfaces. However, an outstanding challenge in building an elementary network of neutral atom-cavity systems is in establishing a single atom dipole trap within each cavity mode. This thesis presents the development of an open-access cavity suitable for single atom localisation, whilst maintaining strong atom-cavity coupling, {g0,κ,γ} = {11,2.1,3} × 2πMHz, and the efficient extraction of generated photons, η=0.5. We consider cavity design methodology, deriving a connection between the physical properties of the optical resonator and its intended role in the production of single photons. An experimental platform is developed for the creation of cavity mirrors by laser ablation, with a high degree of geometrical control. This is used to produce a set of pyramidal micro-mirrors, demonstrated to represent a favourable alternative to the widespread adoption of fibre-tip cavities. These pyramidal mirrors are shown to support multi-feature resonators, allowing several atom-cavity interfaces to be formed using a pair of substrates. By developing a novel procedure for mirror alignment, a hybrid mirror cavity is fabricated and integrated into an experimental architecture tailored for atomic trapping. Suitability of the cavity for future experimentation is demonstrated by frequency stabilisation to an atomic resonance of 87Rb.