Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1108.2087 · Applied Physics Letters

Fabrication of glass micro-cavities for cavity quantum electrodynamics experiments

Arpan Roy, Murray D. Barrett

Published Oct 24, 2011• 11 citations
arXivHTMLPDF

Abstract

We report a process for fabricating high quality, defect-free spherical mirror templates suitable for developing high finesse optical Fabry-Perot resonators. The process utilizes the controlled re-flow of borosilicate glass and differential pressure to produce mirrors with 0.3 nm surface roughness. The dimensions of the mirrors are in the 0.5–5 mm range making them suitable candidates for integration with on-chip neutral atom and ion experiments where enhanced interaction between atoms and photons is required. Cavities constructed with these mirror templates are well suited to quantum information applications such as single photon sources and atom-photon entanglement.

DOI
10.1063/1.3658391

Related papers

Ultrasmooth microfabricated mirrors for quantum information

Grant W. Biedermann, Francisco Benito, Kevin Fortier +6 more

In this paper, we realize a scalable micromirror suitable for atom chip based cavity quantum electrodynamics applications. A very low surface roughness of 2.2 Å rms on the silicon cavity mirrors is achieved using chemical dry etching along with plasma and oxidation smoothing. Our Fabry–Perot cavity comprised of these mirrors currently demonstrates the highest finesse, F=64 000, using microfabricated mirrors. We compute a single atom cooperativity for our cavities of more than 200, making them promising candidates for detecting individual atoms and for quantum information applications on a chip.

Applied Physics Letters•Nov 1, 2010•30 citations

Optical cavities for quantum information processing with trapped neutral atoms

Thomas H. Doherty

A leading strategy for the creation of a scalable quantum computer is through a networked architecture. This would comprise stationary nodes for quantum information processing and photonic channels for their communication and entanglement distribution. In this scheme a coherent interface between light and matter is a critical component, facilitating the deterministic and reversible transfer of quantum information between stationary and travelling qubits. This requirement may be fulfilled by a high finesse optical cavity, whose radiation field is strongly coupled to a trapped quantised emitter. Neutral atoms are an ideal species for the development of such a device, given their inherent compatibility with dielectric mirror surfaces. However, an outstanding challenge in building an elementary network of neutral atom-cavity systems is in establishing a single atom dipole trap within each cavity mode. This thesis presents the development of an open-access cavity suitable for single atom localisation, whilst maintaining strong atom-cavity coupling, {g0,κ,γ} = {11,2.1,3} × 2πMHz, and the efficient extraction of generated photons, η=0.5. We consider cavity design methodology, deriving a connection between the physical properties of the optical resonator and its intended role in the production of single photons. An experimental platform is developed for the creation of cavity mirrors by laser ablation, with a high degree of geometrical control. This is used to produce a set of pyramidal micro-mirrors, demonstrated to represent a favourable alternative to the widespread adoption of fibre-tip cavities. These pyramidal mirrors are shown to support multi-feature resonators, allowing several atom-cavity interfaces to be formed using a pair of substrates. By developing a novel procedure for mirror alignment, a hybrid mirror cavity is fabricated and integrated into an experimental architecture tailored for atomic trapping. Suitability of the cavity for future experimentation is demonstrated by frequency stabilisation to an atomic resonance of 87Rb.

•Jan 1, 2021•0 citations

Design and characterization of an integrated surface ion trap and micromirror optical cavity

Andre J. Van Rynbach, George Schwartz, Robert Spivey +3 more

We have fabricated and characterized laser-ablated micromirrors on fused silica substrates for constructing stable Fabry–Perot optical cavities. We highlight several design features which allow these cavities to have lengths in the 250–300 μm range and be integrated directly with surface ion traps. We present a method to calculate the optical mode shape and losses of these micromirror cavities as functions of cavity length and mirror shape, and confirm that our simulation model is in good agreement with experimental measurements of the intracavity optical mode at a test wavelength of 780 nm. We have designed and tested a mechanical setup for dampening vibrations and stabilizing the cavity length, and explore applications for these cavities as efficient single-photon sources when combined with trapped Yb171+ ions.

Applied Optics•Aug 3, 2017•1 citation

Fabry-Perot microcavity for diamond-based photonics

Erika Janitz, Maximilian Ruf, Mark Dimock +3 more

Open Fabry-Perot microcavities represent a promising route for achieving a quantum electrodynamics (cavity-QED) platform with diamond-based emitters. In particular, they offer the opportunity to introduce high-purity, minimally fabricated material into a tunable, high quality factor optical resonator. Here, we demonstrate a fiber-based microcavity incorporating a thick ($>10\phantom{\rule{4pt}{0ex}}\ensuremath{\mu}\text{m}$) diamond membrane with a finesse of 17 000, corresponding to a quality factor $Q\ensuremath{\sim}{10}^{6}$. Such minimally fabricated thick samples can contain optically stable emitters similar to those found in bulk diamond. We observe modified microcavity spectra in the presence of the membrane, and we develop analytic and numerical models to describe the effect of the membrane on cavity modes, including loss and coupling to higher-order transverse modes. We estimate that a Purcell enhancement of approximately 20 should be possible for emitters within the diamond in this device, and we provide evidence that better diamond surface treatments and mirror coatings could increase this value to 200 in a realistic system.

arXiv:1508.06588•Physical Review A•Oct 30, 2015•86 citations

Quantum metrology with Fiber Fabry-Perot cavities (Conference Presentation)

Jakob Reichel

The development of laser-machined, ultralow roughness micromirrors on optical fiber tips has enabled a new type of high-finesse Fiber Fabry-Perot cavities (FFPs). These microcavities are used very successfully in an increasing number of quantum technology applications, reaching from single-photon sources with various solid-state emitters to entanglement generation in ultracold atomic ensembles. They are also attractive for general photonics applications where high cavity finesse is desired, combinin narrow resonance width and large stopband with high transmission, excellent passive stability and built-in fiber coupling. I will give a short overview of this cavity technology and describe an experiment where we are using a next-generation FFP cavity to generate long-lived spin squeezed states in an atomic clock on a chip.

Optical and Quantum Sensing and Precision Metrology II•Mar 27, 2020•0 citations

Etching techniques for realizing optical micro-cavity atom traps on silicon

Z. Moktadir, E Koukharenka, Michael D. Kraft +4 more

We have fabricated curved optical micromirrors on silicon. We expect to be able to form open optical cavities between these mirrors and plane mirrors coated on the ends of optical fibres. The curved mirror templates have been prepared with less than 10 nm surface roughness by means of isotropic chemical etching. Two different methods are used for the fabrication of the mirrors: the first method uses a silicon oxide mask, while the second uses dry etching to form an indentation in the silicon surface that is opened out by wet isotropic etching. After coating the silicon substrate with gold, good quality mirrors are obtained with R ∼ 98% in the near infra-red. We find that a reflectivity of approximately 98% can be achieved by this method. Cavities formed from these mirrors will be useful for manipulating single atoms.

Journal of Micromechanics and Microengineering•Aug 21, 2004•26 citations
We report a process for fabricating high quality, defect-free spherical mirror templates suitable for developing high finesse optical Fabry-Perot resonators. The process utilizes the controlled re-flow of borosilicate glass and differential pressure to produce mirrors with 0.3 nm surface roughness. The dimensions of the mirrors are in the 0.5–5 mm range making them suitable candidates for integration with on-chip neutral atom and ion experiments where enhanced interaction between atoms and photons is required. Cavities constructed with these mirror templates are well suited to quantum information applications such as single photon sources and atom-photon entanglement.
In this paper, we realize a scalable micromirror suitable for atom chip based cavity quantum electrodynamics applications. A very low surface roughness of 2.2 Å rms on the silicon cavity mirrors is achieved using chemical dry etching along with plasma and oxidation smoothing. Our Fabry–Perot cavity comprised of these mirrors currently demonstrates the highest finesse, F=64 000, using microfabricated mirrors. We compute a single atom cooperativity for our cavities of more than 200, making them promising candidates for detecting individual atoms and for quantum information applications on a chip.
A leading strategy for the creation of a scalable quantum computer is through a networked architecture. This would comprise stationary nodes for quantum information processing and photonic channels for their communication and entanglement distribution. In this scheme a coherent interface between light and matter is a critical component, facilitating the deterministic and reversible transfer of quantum information between stationary and travelling qubits. This requirement may be fulfilled by a high finesse optical cavity, whose radiation field is strongly coupled to a trapped quantised emitter. Neutral atoms are an ideal species for the development of such a device, given their inherent compatibility with dielectric mirror surfaces. However, an outstanding challenge in building an elementary network of neutral atom-cavity systems is in establishing a single atom dipole trap within each cavity mode. This thesis presents the development of an open-access cavity suitable for single atom localisation, whilst maintaining strong atom-cavity coupling, {g0,κ,γ} = {11,2.1,3} × 2πMHz, and the efficient extraction of generated photons, η=0.5. We consider cavity design methodology, deriving a connection between the physical properties of the optical resonator and its intended role in the production of single photons. An experimental platform is developed for the creation of cavity mirrors by laser ablation, with a high degree of geometrical control. This is used to produce a set of pyramidal micro-mirrors, demonstrated to represent a favourable alternative to the widespread adoption of fibre-tip cavities. These pyramidal mirrors are shown to support multi-feature resonators, allowing several atom-cavity interfaces to be formed using a pair of substrates. By developing a novel procedure for mirror alignment, a hybrid mirror cavity is fabricated and integrated into an experimental architecture tailored for atomic trapping. Suitability of the cavity for future experimentation is demonstrated by frequency stabilisation to an atomic resonance of 87Rb.
We have fabricated and characterized laser-ablated micromirrors on fused silica substrates for constructing stable Fabry–Perot optical cavities. We highlight several design features which allow these cavities to have lengths in the 250–300 μm range and be integrated directly with surface ion traps. We present a method to calculate the optical mode shape and losses of these micromirror cavities as functions of cavity length and mirror shape, and confirm that our simulation model is in good agreement with experimental measurements of the intracavity optical mode at a test wavelength of 780 nm. We have designed and tested a mechanical setup for dampening vibrations and stabilizing the cavity length, and explore applications for these cavities as efficient single-photon sources when combined with trapped Yb171+ ions.
Open Fabry-Perot microcavities represent a promising route for achieving a quantum electrodynamics (cavity-QED) platform with diamond-based emitters. In particular, they offer the opportunity to introduce high-purity, minimally fabricated material into a tunable, high quality factor optical resonator. Here, we demonstrate a fiber-based microcavity incorporating a thick ($>10\phantom{\rule{4pt}{0ex}}\ensuremath{\mu}\text{m}$) diamond membrane with a finesse of 17 000, corresponding to a quality factor $Q\ensuremath{\sim}{10}^{6}$. Such minimally fabricated thick samples can contain optically stable emitters similar to those found in bulk diamond. We observe modified microcavity spectra in the presence of the membrane, and we develop analytic and numerical models to describe the effect of the membrane on cavity modes, including loss and coupling to higher-order transverse modes. We estimate that a Purcell enhancement of approximately 20 should be possible for emitters within the diamond in this device, and we provide evidence that better diamond surface treatments and mirror coatings could increase this value to 200 in a realistic system.
The development of laser-machined, ultralow roughness micromirrors on optical fiber tips has enabled a new type of high-finesse Fiber Fabry-Perot cavities (FFPs). These microcavities are used very successfully in an increasing number of quantum technology applications, reaching from single-photon sources with various solid-state emitters to entanglement generation in ultracold atomic ensembles. They are also attractive for general photonics applications where high cavity finesse is desired, combinin narrow resonance width and large stopband with high transmission, excellent passive stability and built-in fiber coupling. I will give a short overview of this cavity technology and describe an experiment where we are using a next-generation FFP cavity to generate long-lived spin squeezed states in an atomic clock on a chip.
We have fabricated curved optical micromirrors on silicon. We expect to be able to form open optical cavities between these mirrors and plane mirrors coated on the ends of optical fibres. The curved mirror templates have been prepared with less than 10 nm surface roughness by means of isotropic chemical etching. Two different methods are used for the fabrication of the mirrors: the first method uses a silicon oxide mask, while the second uses dry etching to form an indentation in the silicon surface that is opened out by wet isotropic etching. After coating the silicon substrate with gold, good quality mirrors are obtained with R ∼ 98% in the near infra-red. We find that a reflectivity of approximately 98% can be achieved by this method. Cavities formed from these mirrors will be useful for manipulating single atoms.