For pt.I see ibid., vol.39, p.1121, 1993. The common randomness (CR) capacity of a two-terminal model is defined as the maximum rate of common randomness that the terminals can generate using resources specified by the given model. We determine CR capacity for several models, including those whose statistics depend on unknown parameters. The CR capacity is shown to be achievable robustly, by common randomness of nearly uniform distribution no matter what the unknown parameters are. Our CR capacity results are relevant for the problem of identification capacity, and also yield a new result on the regular (transmission) capacity of arbitrarily varying channels with feedback.
For pt.I see ibid., vol.39, p.1121, 1993. The common randomness (CR) capacity of a two-terminal model is defined as the maximum rate of common randomness that the terminals can generate using resources specified by the given model. We determine CR capacity for several models, including those whose statistics depend on unknown parameters. The CR capacity is shown to be achievable robustly, by common randomness of nearly uniform distribution no matter what the unknown parameters are. Our CR capacity results are relevant for the problem of identification capacity, and also yield a new result on the regular (transmission) capacity of arbitrarily varying channels with feedback.
Common randomness (CR), as a resource, is not commonly used in existing practical communication systems. In the common randomness framework, both sender and receiver, often described as terminals, aim to generate a common random variable observable to both, perhaps with low error probability. The knowledge of this CR allows to implement correlated random protocols that could lead to faster and more efficient algorithms. We characterize CR over Gaussian channels for their practical relevance in many communication situations by deriving the CR capacity for both Gaussian Single-Input Single-Output (SISO) and Multiple-Input Multiple-Output (MIMO) cases. Furthermore, CR plays a key role in the identification scheme. In many new applications such as several machine-to-machine and human-to-machine systems and the tactile internet, which demand ultra-reliable low latency, the identification or also called post-Shannon scheme is proved to be more efficient than the classical transmission. It has been proved that through CR generation, the post-Shannon communication task allows to achieve an enormous performance gain. We consider a correlation-assisted secure identification scheme over Gaussian wiretap channels (GWC) and develop a lower bound on the corresponding secure identification capacity.
We investigate the problem of generating common randomness (CR) from finite compound sources aided by unidirectional communication over rate-limited perfect channels. The two communicating parties, often referred to as terminals, observe independent and identically distributed (i.i.d.) samples of a finite compound source and aim to agree on a common random variable with a high probability for every possible realization of the source state. Both parties know the set of source states as well as their statistics. However, they are unaware of the actual realization of the source state. We establish a single-letter lower and upper bound on the compound CR capacity for the specified model. Furthermore, we present two special scenarios where the established bounds coincide.
Common Randomness (CR) as a resource is gaining increasing use cases for addressing futuristic communication demands such as scalability, technological sovereignty, and trustworthiness. For instance, CR can be applied to enhance data encryption. It also enables scalable identification (ID) codes and can support up to double-exponential ID capacity. Moreover, CR strengthens wireless communication systems by providing robustness against jamming attacks. However, from the viewpoint of a communication system, two distinct terminals or devices that wish to generate CR must first observe a correlated random source. In a wireless communication system, this source can be the channel’s stochastic nature, as reflected in the received signal. Traditionally, such an attempt has already been made for physical-layer secret key generation. However, the primary objective of PLSK is to provide information-theoretic security, which does not require generating CR at a very high rate. In novel communication methods such as ID-codes, for a discrete memoryless channel, the ID capacity is lower-bounded by CR capacity. In other words, to realize the benefits of CR assisted ID codes, it is required to generate a vast number of CR bits from very few channel observations. Therefore, there is a need to re-examine the PLSK methodology and modify it so that the resulting generated CR can be adopted into novel communication concepts, such as ID codes. This thesis aims to redesign PLSK so that the resulting information-theoretic CR rate more closely approaches the CR capacity than traditional PLSK schemes. The thesis introduces an initial PLSK implementation on Software-Defined Radios (SDRs) and discusses the trade-offs of attempting to improve the rate of CR generation in the PLSK system. Subsequently, the PLSK method is redesigned to enhance the CR rate. This is achieved through a two-step process: modifying CR generation methods and improving the storage of their components. In the methods section, I combine filters with low cutoff frequencies, multi-bit quantization, and gray-code encoding with a novel functional block called randomization. In the storage section, I propose introducing a 16-bit RSSI instead of an 8-bit RSSI to enhance CR rate through a novel paradigm called engineering entropy. I demonstrate and discuss the resulting improvement in the CR rate achieved with SDRs, compared to the corresponding state-of-the-art PLSK strategy.:1 Introduction 1 1.1 Motivation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.2 Background . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1.3 Contributions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1.4 Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2 Physical Layer Secret Key Generation for Post-Quantum Cryptography 2.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 2.2 Implementation of Physical Layer Secret Key (PLSK) . . . . . . . 9 2.3 Experimental Setup . . . . . . . . . . . . . . . . . . . . . . . . . 13 2.4 Results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 2.5 Conclusion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 2.6 Further Development . . . . . . . . . . . . . . . . . . . . . . . . 15 3 Overview of Common Randomness Generation 17 3.1 Theoretical Foundation . . . . . . . . . . . . . . . . . . . . . . . 17 3.2 Illustrative Example for Common Randomness Generation . . . 19 4 ImprovingCommonRandomness Rate Through Functional Blocks 23 4.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 4.2 Improving Common Randomness (CR) Rate . . . . . . . . . . . 26 4.3 Review of CR Generation Capacity . . . . . . . . . . . . . . . . 27 4.4 Individual Stages . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 4.5 Evaluation Metrics . . . . . . . . . . . . . . . . . . . . . . . . . . 38 4.6 The CFO-CR Testbed: The Experimental Setup . . . . . . . . . . 40 4.7 Results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 4.8 Conclusion and Future Directions . . . . . . . . . . . . . . . . . 54 5 Improving Common Randomness Rate Through RSSI Storage 59 5.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 5.2 Background . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 5.3 General System Model . . . . . . . . . . . . . . . . . . . . . . . 61 5.4 Extraction Stages . . . . . . . . . . . . . . . . . . . . . . . . . . 63 5.5 Testbed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 5.6 Evaluation Metrics . . . . . . . . . . . . . . . . . . . . . . . . . . 71 5.7 Results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 5.8 Conclusion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 Conclusions 91 Bibliography 93
Ahlswede-Csiszar (1993) and Csiszar (see Problemy Peredacii Informatsii, 1996) have addressed problems of determining the common randomness (CR) capacity and the secret key (SK) capacity for a variety of models as they arise in information theory and cryptography. We study problems of common randomness and secret key generation by a pair of terminals called the "users" with help from a third terminal, called the "helper". Noiseless one-way communication from the helper to the users as also from one user to the other, subject to rate constraints, is permitted over public channels. A situation involving a wiretapper is also considered.
The basic two-terminal common randomness (CR) and key generation models are considered, where the communication between the terminals may be limited, and in particular may not be enough to achieve the maximum CR/key rate. We introduce general notions of XY-absolutely continuity and XY-concave function, and characterize the first order CR/key-communication tradeoff in terms of the evaluation of the XY-concave envelope of a functional defined on a set of distributions, which is simpler than the multi-letter characterization. Two extreme cases are given special attention. First, in the regime of very small communication rates, the CR bits per interaction bit (CRBIB) and key bits per interaction bit (KBIB) are expressed with a new symmetrical strong data processing constant, defined as the minimum of a parameter such that a certain information-theoretic functional touches its XY-concave envelope at a given source distribution. We also provide a computationally friendly strong converse bound for CRBIB and a similar (but not necessarily strong) one for KBIB in terms of the supremum of the maximal correlation coefficient over a set of distributions. The proof uses hypercontractivity and properties of the R\'enyi divergence. A criterion the tightness of the bound is given with applications to binary symmetric sources. Second, a new characterization of the minimum interaction rate needed for achieving the maximum key rate (MIMK) is given, and we resolve a conjecture by Tyagi and Narayan \cite{tyagi2013common} regarding the MIMK for binary sources. We also propose a new conjecture for binary symmetric sources.
Common randomness (CR) is a valuable resource for enhancing the trustworthiness of 6G communication systems. This article highlights the role of CR in improving scalability, security, and resilience in distributed 6G architectures. It provides an overview of information-theoretic two-source models for CR generation and summarizes known capacity results, together with their implications for practical systems under different communication settings, including one-way, two-way, helper-assisted, and interactive scenarios. Furthermore, the article explores CR-assisted secure identification over Gaussian channels as an application and highlights selected open research problems in CR generation for next-generation wireless systems. The article targets researchers and practitioners interested in bridging information-theoretic tools with emerging 6G communication systems.