Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Globecom

Common Randomness Generation and Identification over Gaussian Channels

Rami Ezzine, Wafa Labidi, Holger Boche, Christian Deppe

Published Dec 1, 2020• 28 citations
Publisher

Abstract

Common randomness (CR), as a resource, is not commonly used in existing practical communication systems. In the common randomness framework, both sender and receiver, often described as terminals, aim to generate a common random variable observable to both, perhaps with low error probability. The knowledge of this CR allows to implement correlated random protocols that could lead to faster and more efficient algorithms. We characterize CR over Gaussian channels for their practical relevance in many communication situations by deriving the CR capacity for both Gaussian Single-Input Single-Output (SISO) and Multiple-Input Multiple-Output (MIMO) cases. Furthermore, CR plays a key role in the identification scheme. In many new applications such as several machine-to-machine and human-to-machine systems and the tactile internet, which demand ultra-reliable low latency, the identification or also called post-Shannon scheme is proved to be more efficient than the classical transmission. It has been proved that through CR generation, the post-Shannon communication task allows to achieve an enormous performance gain. We consider a correlation-assisted secure identification scheme over Gaussian wiretap channels (GWC) and develop a lower bound on the corresponding secure identification capacity.

DOI
10.1109/globecom42002.2020.9322460

Related papers

Secure Identification for Gaussian Channels and Identification for Multi-Antenna Gaussian Channels

Wafa Labidi, Christian Deppe, Holger Boche

New applications in modern communications are demanding robust and ultra-reliable low latency information exchange such as machine-to-machine and human-to-machine communications. For many of these applications, the identification approach of Ahlswede and Dueck is much more efficient than the classical message transmission scheme proposed by Shannon. Previous studies concentrate mainly on identification over discrete channels. For discrete channels, it was proved that identification is robust under channels uncertainty. Furthermore, optimal identification schemes that are secure and robust against jamming attacks have been considered. However, no results for continuous channels have yet been established. That is why we focus on the continuous case: the Gaussian channel for its known practical relevance. We deal with secure identification over Gaussian channels. Provable secure communication is of a high interest for future communication systems. A key technique for implementing secure communication is the physical layer security based on information theoretic security. We model this with the wiretap channel. In particular, we provide a suitable coding scheme for the Gaussian wiretap channel (GWC) and determine the corresponding secure identification capacity. We also consider Multiple-Input Multiple-Output (MIMO) Gaussian channels and provide an efficient signal-processing scheme. This scheme allows a separation of signal-processing and Gaussian coding.

arXiv:2011.06443•Nov 12, 2020•3 citations

Common Randomness Generation for Post-Shannon Communication

Prashanth Kumar Herooru Sheshagiri

Common Randomness (CR) as a resource is gaining increasing use cases for addressing futuristic communication demands such as scalability, technological sovereignty, and trustworthiness. For instance, CR can be applied to enhance data encryption. It also enables scalable identification (ID) codes and can support up to double-exponential ID capacity. Moreover, CR strengthens wireless communication systems by providing robustness against jamming attacks. However, from the viewpoint of a communication system, two distinct terminals or devices that wish to generate CR must first observe a correlated random source. In a wireless communication system, this source can be the channel’s stochastic nature, as reflected in the received signal. Traditionally, such an attempt has already been made for physical-layer secret key generation. However, the primary objective of PLSK is to provide information-theoretic security, which does not require generating CR at a very high rate. In novel communication methods such as ID-codes, for a discrete memoryless channel, the ID capacity is lower-bounded by CR capacity. In other words, to realize the benefits of CR assisted ID codes, it is required to generate a vast number of CR bits from very few channel observations. Therefore, there is a need to re-examine the PLSK methodology and modify it so that the resulting generated CR can be adopted into novel communication concepts, such as ID codes. This thesis aims to redesign PLSK so that the resulting information-theoretic CR rate more closely approaches the CR capacity than traditional PLSK schemes. The thesis introduces an initial PLSK implementation on Software-Defined Radios (SDRs) and discusses the trade-offs of attempting to improve the rate of CR generation in the PLSK system. Subsequently, the PLSK method is redesigned to enhance the CR rate. This is achieved through a two-step process: modifying CR generation methods and improving the storage of their components. In the methods section, I combine filters with low cutoff frequencies, multi-bit quantization, and gray-code encoding with a novel functional block called randomization. In the storage section, I propose introducing a 16-bit RSSI instead of an 8-bit RSSI to enhance CR rate through a novel paradigm called engineering entropy. I demonstrate and discuss the resulting improvement in the CR rate achieved with SDRs, compared to the corresponding state-of-the-art PLSK strategy.:1 Introduction 1 1.1 Motivation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.2 Background . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1.3 Contributions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1.4 Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2 Physical Layer Secret Key Generation for Post-Quantum Cryptography 2.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 2.2 Implementation of Physical Layer Secret Key (PLSK) . . . . . . . 9 2.3 Experimental Setup . . . . . . . . . . . . . . . . . . . . . . . . . 13 2.4 Results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 2.5 Conclusion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 2.6 Further Development . . . . . . . . . . . . . . . . . . . . . . . . 15 3 Overview of Common Randomness Generation 17 3.1 Theoretical Foundation . . . . . . . . . . . . . . . . . . . . . . . 17 3.2 Illustrative Example for Common Randomness Generation . . . 19 4 ImprovingCommonRandomness Rate Through Functional Blocks 23 4.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 4.2 Improving Common Randomness (CR) Rate . . . . . . . . . . . 26 4.3 Review of CR Generation Capacity . . . . . . . . . . . . . . . . 27 4.4 Individual Stages . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 4.5 Evaluation Metrics . . . . . . . . . . . . . . . . . . . . . . . . . . 38 4.6 The CFO-CR Testbed: The Experimental Setup . . . . . . . . . . 40 4.7 Results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 4.8 Conclusion and Future Directions . . . . . . . . . . . . . . . . . 54 5 Improving Common Randomness Rate Through RSSI Storage 59 5.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 5.2 Background . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 5.3 General System Model . . . . . . . . . . . . . . . . . . . . . . . 61 5.4 Extraction Stages . . . . . . . . . . . . . . . . . . . . . . . . . . 63 5.5 Testbed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 5.6 Evaluation Metrics . . . . . . . . . . . . . . . . . . . . . . . . . . 71 5.7 Results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 5.8 Conclusion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 Conclusions 91 Bibliography 93

•Jan 1, 2026•0 citations

Secure Identification for Gaussian Channels

Wafa Labidi, Christian Deppe, Holger Boche

New applications in modern communications are demanding robust and ultra-reliable low latency information exchange such as machine-to-machine and human-to-machine communications. For many of these applications, the identification approach of Ahlswede and Dueck is much more efficient than the classical transmission scheme proposed by Shannon. Previous studies concentrate mainly on identification over discrete channels. We focus on Gaussian channels for their known practical relevance. We deal with secure identification over Gaussian channels. In particular, we provide a suitable coding scheme for the Gaussian wiretap channel (GWC) and determine the corresponding secure identification capacity.

IEEE International Conference on Acoustics Speech and Signal Processing•Apr 9, 2020•23 citations

Common Randomness: A Key Enabler of Trustworthy 6G Communication Systems

Rami Ezzine, Moritz Wiese, Wafa Labidi +2 more

Common randomness (CR) is a valuable resource for enhancing the trustworthiness of 6G communication systems. This article highlights the role of CR in improving scalability, security, and resilience in distributed 6G architectures. It provides an overview of information-theoretic two-source models for CR generation and summarizes known capacity results, together with their implications for practical systems under different communication settings, including one-way, two-way, helper-assisted, and interactive scenarios. Furthermore, the article explores CR-assisted secure identification over Gaussian channels as an application and highlights selected open research problems in CR generation for next-generation wireless systems. The article targets researchers and practitioners interested in bridging information-theoretic tools with emerging 6G communication systems.

arXiv:2609.18574•IEEE BITS the Information Theory Magazine•Jan 1, 2026•0 citations

Common Randomness Generation from Gaussian Sources

Wafa Labidi, Rami Ezzine, Christian Deppe +1 more

We study the problem of common randomness (CR) generation in the basic two-party communication setting in which the sender and the receiver aim to agree on a common random variable with high probability by observing independent and identically distributed (i.i.d.) samples of correlated Gaussian sources and while communicating as little as possible over a noisy memoryless channel. We completely solve the problem by giving a single-letter characterization of the CR capacity for the proposed model and by providing rigorous proof of it We prove that the CR capacity is infinite when the Gaussian sources are perfectly correlated.

arXiv:2201.11078•IEEE International Symposium on Information Theory (ISIT)•Jun 26, 2022•9 citations

Chaos is a Ladder (and Increases With Storage): Aiding Communications With RSSI-Based Common Randomness

Prashanth K. H. Sheshagiri, Martin Reisslein B, Juan Alberto Cabrera +1 more

Common randomness (CR) is an important resource for future communication paradigms. Identification is one such future communication paradigm, and it has been proven that CR-assisted identification can improve identification capacity by a double exponential factor. To achieve this, the common source of observation must be perfectly correlated and contain sufficient entropy. Channel reciprocity-based CR generation (alternatively termed Physical Layer Secret Key (PLSK) generation) is one such CR generation scheme. Existing high-rate CR generation is based on the Carrier Frequency Offset (CFO); for practical implementation, CFO-based CR generation would require a re-design of the existing protocol stacks to pass the CFO from the physical layer to the higher protocol layers. In contrast, we develop high-rate CR generation based on the Received Signal Strength Indicator (RSSI), which is highly practical as the RSSI is passed to and widely used by the higher protocol layers in existing communication protocol stacks. For RSSI-based CR generation, we demonstrate that the memory resources dedicated to storing channel information play an important role in achieving a high CR generation rate. Specifically, we demonstrate, through an experimental testbed with Ettus N210 USRPs Software Defined Radios (SDRs) (from which we make datasets publicly available), how allocating higher memory resources for storing accurate RSSI channel information at the terminals (transceivers) increases the achievable CR generation rate.

IEEE Access•Jan 1, 2026•0 citations
Common randomness (CR), as a resource, is not commonly used in existing practical communication systems. In the common randomness framework, both sender and receiver, often described as terminals, aim to generate a common random variable observable to both, perhaps with low error probability. The knowledge of this CR allows to implement correlated random protocols that could lead to faster and more efficient algorithms. We characterize CR over Gaussian channels for their practical relevance in many communication situations by deriving the CR capacity for both Gaussian Single-Input Single-Output (SISO) and Multiple-Input Multiple-Output (MIMO) cases. Furthermore, CR plays a key role in the identification scheme. In many new applications such as several machine-to-machine and human-to-machine systems and the tactile internet, which demand ultra-reliable low latency, the identification or also called post-Shannon scheme is proved to be more efficient than the classical transmission. It has been proved that through CR generation, the post-Shannon communication task allows to achieve an enormous performance gain. We consider a correlation-assisted secure identification scheme over Gaussian wiretap channels (GWC) and develop a lower bound on the corresponding secure identification capacity.
New applications in modern communications are demanding robust and ultra-reliable low latency information exchange such as machine-to-machine and human-to-machine communications. For many of these applications, the identification approach of Ahlswede and Dueck is much more efficient than the classical message transmission scheme proposed by Shannon. Previous studies concentrate mainly on identification over discrete channels. For discrete channels, it was proved that identification is robust under channels uncertainty. Furthermore, optimal identification schemes that are secure and robust against jamming attacks have been considered. However, no results for continuous channels have yet been established. That is why we focus on the continuous case: the Gaussian channel for its known practical relevance. We deal with secure identification over Gaussian channels. Provable secure communication is of a high interest for future communication systems. A key technique for implementing secure communication is the physical layer security based on information theoretic security. We model this with the wiretap channel. In particular, we provide a suitable coding scheme for the Gaussian wiretap channel (GWC) and determine the corresponding secure identification capacity. We also consider Multiple-Input Multiple-Output (MIMO) Gaussian channels and provide an efficient signal-processing scheme. This scheme allows a separation of signal-processing and Gaussian coding.
Common Randomness (CR) as a resource is gaining increasing use cases for addressing futuristic communication demands such as scalability, technological sovereignty, and trustworthiness. For instance, CR can be applied to enhance data encryption. It also enables scalable identification (ID) codes and can support up to double-exponential ID capacity. Moreover, CR strengthens wireless communication systems by providing robustness against jamming attacks. However, from the viewpoint of a communication system, two distinct terminals or devices that wish to generate CR must first observe a correlated random source. In a wireless communication system, this source can be the channel’s stochastic nature, as reflected in the received signal. Traditionally, such an attempt has already been made for physical-layer secret key generation. However, the primary objective of PLSK is to provide information-theoretic security, which does not require generating CR at a very high rate. In novel communication methods such as ID-codes, for a discrete memoryless channel, the ID capacity is lower-bounded by CR capacity. In other words, to realize the benefits of CR assisted ID codes, it is required to generate a vast number of CR bits from very few channel observations. Therefore, there is a need to re-examine the PLSK methodology and modify it so that the resulting generated CR can be adopted into novel communication concepts, such as ID codes. This thesis aims to redesign PLSK so that the resulting information-theoretic CR rate more closely approaches the CR capacity than traditional PLSK schemes. The thesis introduces an initial PLSK implementation on Software-Defined Radios (SDRs) and discusses the trade-offs of attempting to improve the rate of CR generation in the PLSK system. Subsequently, the PLSK method is redesigned to enhance the CR rate. This is achieved through a two-step process: modifying CR generation methods and improving the storage of their components. In the methods section, I combine filters with low cutoff frequencies, multi-bit quantization, and gray-code encoding with a novel functional block called randomization. In the storage section, I propose introducing a 16-bit RSSI instead of an 8-bit RSSI to enhance CR rate through a novel paradigm called engineering entropy. I demonstrate and discuss the resulting improvement in the CR rate achieved with SDRs, compared to the corresponding state-of-the-art PLSK strategy.:1 Introduction 1 1.1 Motivation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.2 Background . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1.3 Contributions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1.4 Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2 Physical Layer Secret Key Generation for Post-Quantum Cryptography 2.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 2.2 Implementation of Physical Layer Secret Key (PLSK) . . . . . . . 9 2.3 Experimental Setup . . . . . . . . . . . . . . . . . . . . . . . . . 13 2.4 Results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 2.5 Conclusion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 2.6 Further Development . . . . . . . . . . . . . . . . . . . . . . . . 15 3 Overview of Common Randomness Generation 17 3.1 Theoretical Foundation . . . . . . . . . . . . . . . . . . . . . . . 17 3.2 Illustrative Example for Common Randomness Generation . . . 19 4 ImprovingCommonRandomness Rate Through Functional Blocks 23 4.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 4.2 Improving Common Randomness (CR) Rate . . . . . . . . . . . 26 4.3 Review of CR Generation Capacity . . . . . . . . . . . . . . . . 27 4.4 Individual Stages . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 4.5 Evaluation Metrics . . . . . . . . . . . . . . . . . . . . . . . . . . 38 4.6 The CFO-CR Testbed: The Experimental Setup . . . . . . . . . . 40 4.7 Results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 4.8 Conclusion and Future Directions . . . . . . . . . . . . . . . . . 54 5 Improving Common Randomness Rate Through RSSI Storage 59 5.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 5.2 Background . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 5.3 General System Model . . . . . . . . . . . . . . . . . . . . . . . 61 5.4 Extraction Stages . . . . . . . . . . . . . . . . . . . . . . . . . . 63 5.5 Testbed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 5.6 Evaluation Metrics . . . . . . . . . . . . . . . . . . . . . . . . . . 71 5.7 Results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 5.8 Conclusion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 Conclusions 91 Bibliography 93
New applications in modern communications are demanding robust and ultra-reliable low latency information exchange such as machine-to-machine and human-to-machine communications. For many of these applications, the identification approach of Ahlswede and Dueck is much more efficient than the classical transmission scheme proposed by Shannon. Previous studies concentrate mainly on identification over discrete channels. We focus on Gaussian channels for their known practical relevance. We deal with secure identification over Gaussian channels. In particular, we provide a suitable coding scheme for the Gaussian wiretap channel (GWC) and determine the corresponding secure identification capacity.
Common randomness (CR) is a valuable resource for enhancing the trustworthiness of 6G communication systems. This article highlights the role of CR in improving scalability, security, and resilience in distributed 6G architectures. It provides an overview of information-theoretic two-source models for CR generation and summarizes known capacity results, together with their implications for practical systems under different communication settings, including one-way, two-way, helper-assisted, and interactive scenarios. Furthermore, the article explores CR-assisted secure identification over Gaussian channels as an application and highlights selected open research problems in CR generation for next-generation wireless systems. The article targets researchers and practitioners interested in bridging information-theoretic tools with emerging 6G communication systems.
We study the problem of common randomness (CR) generation in the basic two-party communication setting in which the sender and the receiver aim to agree on a common random variable with high probability by observing independent and identically distributed (i.i.d.) samples of correlated Gaussian sources and while communicating as little as possible over a noisy memoryless channel. We completely solve the problem by giving a single-letter characterization of the CR capacity for the proposed model and by providing rigorous proof of it We prove that the CR capacity is infinite when the Gaussian sources are perfectly correlated.
Common randomness (CR) is an important resource for future communication paradigms. Identification is one such future communication paradigm, and it has been proven that CR-assisted identification can improve identification capacity by a double exponential factor. To achieve this, the common source of observation must be perfectly correlated and contain sufficient entropy. Channel reciprocity-based CR generation (alternatively termed Physical Layer Secret Key (PLSK) generation) is one such CR generation scheme. Existing high-rate CR generation is based on the Carrier Frequency Offset (CFO); for practical implementation, CFO-based CR generation would require a re-design of the existing protocol stacks to pass the CFO from the physical layer to the higher protocol layers. In contrast, we develop high-rate CR generation based on the Received Signal Strength Indicator (RSSI), which is highly practical as the RSSI is passed to and widely used by the higher protocol layers in existing communication protocol stacks. For RSSI-based CR generation, we demonstrate that the memory resources dedicated to storing channel information play an important role in achieving a high CR generation rate. Specifically, we demonstrate, through an experimental testbed with Ettus N210 USRPs Software Defined Radios (SDRs) (from which we make datasets publicly available), how allocating higher memory resources for storing accurate RSSI channel information at the terminals (transceivers) increases the achievable CR generation rate.