Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Instrumentation and Measurement

Stimulated Power Generation in ES-SIS Junction Arrays

Juha Hassel, P. Helistö, Leif Grönberg, Heikki Seppä, J. Nissilä, A. Kemppinen

Published Mar 21, 2005• 8 citations
Publisher

Abstract

We present experimental results on new programmable Josephson voltage standards based on frequency dependently damped superconductor-insulator-superconductor (SIS) junctions. We introduce a design able to generate two independent floating voltages up to 1.5 V using a microwave frequency of 70 GHz. The array is developed for dc and ac voltage and impedance metrology. The design is optimized in terms of speed, power consumption, and stability. Stimulated power generation is shown to affect the performance of long SIS arrays. The collective dynamics of Josephson junctions is analyzed and a boundary condition for the design of long arrays is derived.

DOI
10.1109/tim.2004.843119

Related papers

Optimization of a Josephson voltage array based on frequency dependently damped superconductor–insulator–superconductor junctions

Juha Hassel, Heikki Seppä, Leif Grönberg +1 more

We have developed a programmable Josephson voltage standard based on an array of superconductor–insulator–superconductor junctions. The junctions are damped by an external frequency-dependent shunt circuit, which allows operation at Shapiro steps with n>1. We derive optimization criteria for the design parameters for a fast and stable array with low power consumption. An array able to generate 1.0 VRMS ac voltage signal with sub-ppm accuracy is experimentally demonstrated. Theoretically it is also shown that a fast programmable 10 V array can be realized.

Review of Scientific Instruments•Jun 30, 2003•18 citations

SIS junctions with frequency dependent damping for a programmable Josephson voltage standard

Juha Hassel, Heikki Seppä, Leif Grönberg +1 more

Experimental and computational results on programmable Josephson junction array (JJA) chips based on superconductor-insulator-superconductor (SIS) junctions are presented. Implications of circuit design and fabrication process on the performance are discussed. We introduce a method to decrease the attenuation of the pump microwave. Different designs are compared, suggesting that 1 V chips operating at the third constant voltage step with 70 GHz pump frequency can be produced with our process.

IEEE Transactions on Instrumentation and Measurement•Apr 1, 2001•24 citations

10 V SINIS Josephson junction series arrays for programmable voltage standards

J. Kohlmann, H. Schulze, Ralf Behr +2 more

A programmable dc voltage standard for output voltages of up to 10 V has been realized. The series arrays, consisting of about 69120 overdamped superconductor/insulator/normal metal/insulator/superconductor (SINIS) Josephson junctions, have been fabricated using the reliable Nb-Al/Al/sub 2/O/sub 3/ technology. The arrays can be operated in conventional Josephson voltage standards at microwave frequencies from 70 GHz to 75 GHz. Steps of constant voltage are observed at very low microwave power levels, since the major part of the microwave power is generated by the junctions themselves. The operation of the arrays and the formation of Shapiro steps are discussed.

IEEE Transactions on Instrumentation and Measurement•Apr 1, 2001•20 citations

Optimized Nonuniform Nb SIS Parallel Josephson Junction Array Oscillators

Faouzi M. Boussaha, Christine Chaumont, A. Féret +2 more

We developed submillimeter superconducting oscillators using Josephson effects in the Nb-based superconductor-insulator-superconductor (SIS) parallel array. The radiation emitted from the array is detected using integrated SIS twin junctions. Despite the small junction number (N = 21), the (I-V ) characteristics of the detector clearly exhibit photon-assisted quasiparticle steps when the array is biased upon its Josephson resonances, ranging from 370 to 500 GHz. The array has a moderate current density (Jc≈= 6 kA/cm2) but provides an output power around 0.28 μW, which would be sufficient in achieving sensitive heterodyne reception. The impedance array can be matched easier to microwave circuits than the usual long Josephson junctions. Furthermore, the parallel array approach can be also extended up to about 1.4 THz using Nb-based SIS junctions.

IEEE Transactions on Applied Superconductivity•Mar 1, 2016•3 citations

Superconductor-normal-superconductor junctions for programmable voltage standards

S. P. Benz

Series arrays of Nb–PdAu–Nb Josephson junctions were fabricated with characteristics ideally suited for application in programmable voltage standards and D/A converters with fundamental accuracy. Large arrays of junctions with applied microwave power showed constant voltage steps with current amplitudes as large as 7 mA. A novel coplanar waveguide design enabled uniform microwave power coupling to a five-segment array of 8192 junctions, so each segment had constant voltage steps over the same bias range. The 8192-junction device generated 1.1 mA steps at 186 mV with 11 GHz power and a maximum constant voltage step of 260 mV at 15.34 GHz.

Applied Physics Letters•Oct 30, 1995•131 citations

SINIS Josephson junctions for programmable Josephson voltage standard circuits

H. Schulze, F. Muller, Ralf Behr +3 more

Nonhysteretic Josephson junctions with a superconductor-insulator-normal metal-insulator-superconductor (SINIS) structure fabricated using the reliable Nb-AlO/sub x/ technology have been used for the design and fabrication of a 1-V inherently stable Josephson voltage standard. The superconducting circuit can be driven at the same microwave frequencies as conventional SIS circuits. The microwave-induced 1-V step is suitable for calibration purposes. The successful operation of the 1-V circuit is due to an internal, phase-locked oscillation of all SINIS junctions which are embedded in a low-impedance strip-line. The microwave power required for exciting the coherent oscillation is very low and allows the integration of low power sources. Even operation without any external microwave source appears to be possible.

IEEE Transactions on Applied Superconductivity•Jun 1, 1999•51 citations
We present experimental results on new programmable Josephson voltage standards based on frequency dependently damped superconductor-insulator-superconductor (SIS) junctions. We introduce a design able to generate two independent floating voltages up to 1.5 V using a microwave frequency of 70 GHz. The array is developed for dc and ac voltage and impedance metrology. The design is optimized in terms of speed, power consumption, and stability. Stimulated power generation is shown to affect the performance of long SIS arrays. The collective dynamics of Josephson junctions is analyzed and a boundary condition for the design of long arrays is derived.
We have developed a programmable Josephson voltage standard based on an array of superconductor–insulator–superconductor junctions. The junctions are damped by an external frequency-dependent shunt circuit, which allows operation at Shapiro steps with n>1. We derive optimization criteria for the design parameters for a fast and stable array with low power consumption. An array able to generate 1.0 VRMS ac voltage signal with sub-ppm accuracy is experimentally demonstrated. Theoretically it is also shown that a fast programmable 10 V array can be realized.
A programmable dc voltage standard for output voltages of up to 10 V has been realized. The series arrays, consisting of about 69120 overdamped superconductor/insulator/normal metal/insulator/superconductor (SINIS) Josephson junctions, have been fabricated using the reliable Nb-Al/Al/sub 2/O/sub 3/ technology. The arrays can be operated in conventional Josephson voltage standards at microwave frequencies from 70 GHz to 75 GHz. Steps of constant voltage are observed at very low microwave power levels, since the major part of the microwave power is generated by the junctions themselves. The operation of the arrays and the formation of Shapiro steps are discussed.
We developed submillimeter superconducting oscillators using Josephson effects in the Nb-based superconductor-insulator-superconductor (SIS) parallel array. The radiation emitted from the array is detected using integrated SIS twin junctions. Despite the small junction number (N = 21), the (I-V ) characteristics of the detector clearly exhibit photon-assisted quasiparticle steps when the array is biased upon its Josephson resonances, ranging from 370 to 500 GHz. The array has a moderate current density (Jc≈= 6 kA/cm2) but provides an output power around 0.28 μW, which would be sufficient in achieving sensitive heterodyne reception. The impedance array can be matched easier to microwave circuits than the usual long Josephson junctions. Furthermore, the parallel array approach can be also extended up to about 1.4 THz using Nb-based SIS junctions.
Series arrays of Nb–PdAu–Nb Josephson junctions were fabricated with characteristics ideally suited for application in programmable voltage standards and D/A converters with fundamental accuracy. Large arrays of junctions with applied microwave power showed constant voltage steps with current amplitudes as large as 7 mA. A novel coplanar waveguide design enabled uniform microwave power coupling to a five-segment array of 8192 junctions, so each segment had constant voltage steps over the same bias range. The 8192-junction device generated 1.1 mA steps at 186 mV with 11 GHz power and a maximum constant voltage step of 260 mV at 15.34 GHz.
Nonhysteretic Josephson junctions with a superconductor-insulator-normal metal-insulator-superconductor (SINIS) structure fabricated using the reliable Nb-AlO/sub x/ technology have been used for the design and fabrication of a 1-V inherently stable Josephson voltage standard. The superconducting circuit can be driven at the same microwave frequencies as conventional SIS circuits. The microwave-induced 1-V step is suitable for calibration purposes. The successful operation of the 1-V circuit is due to an internal, phase-locked oscillation of all SINIS junctions which are embedded in a low-impedance strip-line. The microwave power required for exciting the coherent oscillation is very low and allows the integration of low power sources. Even operation without any external microwave source appears to be possible.