Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Instrumentation and Measurement

SIS junctions with frequency dependent damping for a programmable Josephson voltage standard

Juha Hassel, Heikki Seppä, Leif Grönberg, Ilkka Suni

Published Apr 1, 2001• 24 citations
Publisher

Abstract

Experimental and computational results on programmable Josephson junction array (JJA) chips based on superconductor-insulator-superconductor (SIS) junctions are presented. Implications of circuit design and fabrication process on the performance are discussed. We introduce a method to decrease the attenuation of the pump microwave. Different designs are compared, suggesting that 1 V chips operating at the third constant voltage step with 70 GHz pump frequency can be produced with our process.

DOI
10.1109/19.918100

Related papers

Stimulated Power Generation in ES-SIS Junction Arrays

Juha Hassel, P. Helistö, Leif Grönberg +3 more

We present experimental results on new programmable Josephson voltage standards based on frequency dependently damped superconductor-insulator-superconductor (SIS) junctions. We introduce a design able to generate two independent floating voltages up to 1.5 V using a microwave frequency of 70 GHz. The array is developed for dc and ac voltage and impedance metrology. The design is optimized in terms of speed, power consumption, and stability. Stimulated power generation is shown to affect the performance of long SIS arrays. The collective dynamics of Josephson junctions is analyzed and a boundary condition for the design of long arrays is derived.

IEEE Transactions on Instrumentation and Measurement•Mar 21, 2005•8 citations

Design and fabrication of 10 V SINIS Josephson arrays for programmable voltage standards

H. Schulze, Ralf Behr, J. Kohlmann +2 more

The fabrication and the chip layout of 69120 SINIS Josephson junction series arrays for a programmable 10 V Josephson dc voltage standard are presented. Under 70 GHz microwave irradiation, the current-voltage characteristic exhibits a non-hysteretic voltage step with a step width of 200 µA. The chip can be operated with the conventional SIS Josephson voltage standard systems.

Superconductor Science and Technology•Aug 2, 2000•67 citations

Optimization of a Josephson voltage array based on frequency dependently damped superconductor–insulator–superconductor junctions

Juha Hassel, Heikki Seppä, Leif Grönberg +1 more

We have developed a programmable Josephson voltage standard based on an array of superconductor–insulator–superconductor junctions. The junctions are damped by an external frequency-dependent shunt circuit, which allows operation at Shapiro steps with n>1. We derive optimization criteria for the design parameters for a fast and stable array with low power consumption. An array able to generate 1.0 VRMS ac voltage signal with sub-ppm accuracy is experimentally demonstrated. Theoretically it is also shown that a fast programmable 10 V array can be realized.

Review of Scientific Instruments•Jun 30, 2003•18 citations

10 V SINIS Josephson junction series arrays for programmable voltage standards

J. Kohlmann, H. Schulze, Ralf Behr +2 more

A programmable dc voltage standard for output voltages of up to 10 V has been realized. The series arrays, consisting of about 69120 overdamped superconductor/insulator/normal metal/insulator/superconductor (SINIS) Josephson junctions, have been fabricated using the reliable Nb-Al/Al/sub 2/O/sub 3/ technology. The arrays can be operated in conventional Josephson voltage standards at microwave frequencies from 70 GHz to 75 GHz. Steps of constant voltage are observed at very low microwave power levels, since the major part of the microwave power is generated by the junctions themselves. The operation of the arrays and the formation of Shapiro steps are discussed.

IEEE Transactions on Instrumentation and Measurement•Apr 1, 2001•20 citations

A Programmable Josephson Voltage Standard Chip using Arrays of NbN/TiN/NbN/TiN/NbN Double-Junction Stacks Operated at 10K

Mayumi Ishizaki, H. Yamamori, Alexandre Shoji +2 more

A programmable Josephson voltage standard chip using arrays of NbN/TiN/NbN/TiN/NbN double-junction stacks was fabricated and operated at 10 K. The circuit with over 260,000 junctions showed constant voltage steps at +/- 6 V when driven at 11 GHz microwave bias. Further investigation is required to achieve 10 V operation at the desired design frequency of 19 GHz

Conference on Precision Electromagnetic Measurements•Jun 1, 2004•2 citations

SINIS Josephson junctions for programmable Josephson voltage standard circuits

H. Schulze, F. Muller, Ralf Behr +3 more

Nonhysteretic Josephson junctions with a superconductor-insulator-normal metal-insulator-superconductor (SINIS) structure fabricated using the reliable Nb-AlO/sub x/ technology have been used for the design and fabrication of a 1-V inherently stable Josephson voltage standard. The superconducting circuit can be driven at the same microwave frequencies as conventional SIS circuits. The microwave-induced 1-V step is suitable for calibration purposes. The successful operation of the 1-V circuit is due to an internal, phase-locked oscillation of all SINIS junctions which are embedded in a low-impedance strip-line. The microwave power required for exciting the coherent oscillation is very low and allows the integration of low power sources. Even operation without any external microwave source appears to be possible.

IEEE Transactions on Applied Superconductivity•Jun 1, 1999•51 citations
Experimental and computational results on programmable Josephson junction array (JJA) chips based on superconductor-insulator-superconductor (SIS) junctions are presented. Implications of circuit design and fabrication process on the performance are discussed. We introduce a method to decrease the attenuation of the pump microwave. Different designs are compared, suggesting that 1 V chips operating at the third constant voltage step with 70 GHz pump frequency can be produced with our process.
We present experimental results on new programmable Josephson voltage standards based on frequency dependently damped superconductor-insulator-superconductor (SIS) junctions. We introduce a design able to generate two independent floating voltages up to 1.5 V using a microwave frequency of 70 GHz. The array is developed for dc and ac voltage and impedance metrology. The design is optimized in terms of speed, power consumption, and stability. Stimulated power generation is shown to affect the performance of long SIS arrays. The collective dynamics of Josephson junctions is analyzed and a boundary condition for the design of long arrays is derived.
We have developed a programmable Josephson voltage standard based on an array of superconductor–insulator–superconductor junctions. The junctions are damped by an external frequency-dependent shunt circuit, which allows operation at Shapiro steps with n>1. We derive optimization criteria for the design parameters for a fast and stable array with low power consumption. An array able to generate 1.0 VRMS ac voltage signal with sub-ppm accuracy is experimentally demonstrated. Theoretically it is also shown that a fast programmable 10 V array can be realized.
A programmable dc voltage standard for output voltages of up to 10 V has been realized. The series arrays, consisting of about 69120 overdamped superconductor/insulator/normal metal/insulator/superconductor (SINIS) Josephson junctions, have been fabricated using the reliable Nb-Al/Al/sub 2/O/sub 3/ technology. The arrays can be operated in conventional Josephson voltage standards at microwave frequencies from 70 GHz to 75 GHz. Steps of constant voltage are observed at very low microwave power levels, since the major part of the microwave power is generated by the junctions themselves. The operation of the arrays and the formation of Shapiro steps are discussed.
Nonhysteretic Josephson junctions with a superconductor-insulator-normal metal-insulator-superconductor (SINIS) structure fabricated using the reliable Nb-AlO/sub x/ technology have been used for the design and fabrication of a 1-V inherently stable Josephson voltage standard. The superconducting circuit can be driven at the same microwave frequencies as conventional SIS circuits. The microwave-induced 1-V step is suitable for calibration purposes. The successful operation of the 1-V circuit is due to an internal, phase-locked oscillation of all SINIS junctions which are embedded in a low-impedance strip-line. The microwave power required for exciting the coherent oscillation is very low and allows the integration of low power sources. Even operation without any external microwave source appears to be possible.