Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Superconductor Science and Technology

From micro- to nano-SQUIDs: applications to nanomagnetism

Wolfgang Wernsdorfer

Published May 14, 2009• 259 citations
Publisher

Abstract

Due to a growing interest in quantum information processing based on spin systems, the micro-SQUID technique has been finding new interest and fabrication improvements have led to nano-SQUIDs. There are two types of nano-SQUIDs: either the cross section of the Josephson junctions is reduced to about 1 nm by using carbon nanotube junctions, or the loop size is reduced to a few 100 nm. This paper reviews the basic ideas of the micro-SQUID technique applied to magnetic nanostructures and shows that both types of nano-SQUIDs lead to a significant improvement concerning the detection of magnetization switching of individual magnetic particles or molecules.

DOI
10.1088/0953-2048/22/6/064013

Related papers

Applications of superconducting electronics to quantum optics and quantum metrology

Ling Yun Hao

SQUIDs (superconducting quantum interference devices) have been in use for more than half a century and constitute one of the first macroscopic quantum devices. SQUIDs operating at millikelvin temperatures can act as qubits for quantum computers and the recent reports of more than 50 qubit circuits indicate how far the technology has developed. In this talk, the author will describe two other applications of SQUIDs as quantum detectors, focusing on single spin and single photon energy resolving detection. Most superconducting devices rely on tri-layer Josephson tunnel junctions which are not easily scalable to the nanoscale. We have developed a Josephson junction fabrication method, based on electron beam lithography or focused ion beam milling of a single thin film of superconductor (Nb generally) which can provide sizes down to 50 nm. These devices are particularly relevant for two main applications in quantum technology and metrology. First, by shrinking the size of the SQUID loop and the junctions to around 200 nm, the sensitivity of the SQUID for magnetization measurements is improved to the level where a single electron spin flip may be detected. This is possible at the relatively elevated temperature of 4K.  We are working with Surrey University to implant single magnetic ions within the SQUID loop to provide a platform to test this combination as the basis for a new form of qubit operating at higher temperatures than the conventional Transmon superconducting devices. A second SQUID based detector which we are developing is an inductive transition edge sensor device (ISTED) for energy resolving measurements of single photons. This is based on the development of conventional transition edge sensors where we detect the change of the penetration depth of a small thin film of superconductor when it absorbs a photon. In this way, a major source of noise in conventional TES may be avoided since the absorber remains in the superconducting state at all times. In this way we have demonstrated single photon detection at 633 nm with 0.1eV resolution at operating temperature of 7.5K.

Advances in Automobile Engineering•Jan 1, 2021•0 citations

Performance of nano superconducting quantum interference devices for small spin cluster detection

C. Granata, Antonio Vettoliere, Pravin S. Walke +2 more

In the present paper, performance of nano-superconducting-quantum-interference devices (SQUIDs) has been investigated in view of their employment in the detection of small spin populations. The analysis has been focused on nano-SQUID sensors having a square loop with a side length of 200 nm. We calculate the spin sensitivity and the magnetic response relative to the single Bohr magneton (single spin), as a function of its position within the SQUID hole. The results show that the SQUID response depends strongly on the spin position; the ratio between the spin sensitivity evaluated in the center of the loop and the minimum one is as high as a factor of 3 for a spin at a reasonable distance z′ of 10 nm from the SQUID plane. Furthermore, the magnetic flux due to several hundred of spins has been evaluated by considering different random spin distributions within the SQUID hole. Due to the both nonuniform SQUID response and the random distribution process, the results show a statistical uncertainty which has been evaluated as a function of the spin number. The estimated informations are very useful to optimize the sensor performance in view of the most nanomagnetism applications.

Journal of Applied Physics•Jul 15, 2009•26 citations

Measurement of the spatial sensitivity of miniature SQUIDs using magnetic-tipped STM

Patrick Josephs-Franks, L Hao, Alexander Ya. Tzalenchuk +5 more

Large area superconducting quantum interference devices (SQUIDs) are known to be ultimate sensors of magnetic flux. By diminishing the size of a SQUID loop, the energy sensitivity of the device can be increased to near quantum-limited operation whilst also making it less sensitive to external magnetic field noise and improving its coupling to any nano-scale magnetic particle within the loop. This makes it an ideal nano-sensor for magnetic particles including single molecules. It is, however, important to optimize the coupling between any magnetic nano-particle placed within the SQUID and the SQUID itself in order to achieve maximum sensitivity for the spin detection. We have made some preliminary calculations of the expected SQUID response to a magnetic particle placed at different locations within the SQUID device, and using a magnetic tip in a scanning tunnelling microscope (STM) we are able to produce a spatial map of the SQUID sensitivity. Initial results on a 3 µm diameter loop SQUID are presented to demonstrate this method.

Superconductor Science and Technology•Nov 13, 2003•23 citations

Investigation of all niobium nano-SQUIDs based on sub-micrometer cross-type Josephson junctions

Matthias Schmelz, Y Matsui, Ronny Stolz +6 more

We report on the development of highly sensitive SQUIDs featuring sub-micrometer loop dimensions. The integration of high quality and low capacitance SIS Nb/AlO x /Nb cross-type Josephson tunnel junctions results in white flux noise levels as low as 66 n Φ 0 Hz −1/2 , well below state-of-the-art values of their Nb-based counterparts based on constriction type junctions. Estimation of the spin sensitivity of the best SQUIDs yield S μ 1/2 < 7 μ B Hz −1/2 in the white noise region, suitable for the investigation of small spin systems. We discuss fabrication challenges, show results on the electrical characterization of devices with various pickup loops, and describe options for further improvement, which may push the sensitivity of such devices even to single spin resolution.

arXiv:1501.00958•Superconductor Science and Technology•Nov 26, 2014•27 citations

Superconducting Nanodevices

J.C. Gallop, L. Hao

This article reviews recent progress in superconducting nanodevices, with particular emphasis on fabrication methods developed for superconducting nanowires and nanoscale Josephson junctions based on different barrier materials. It evaluates the future potential of superconducting nanodevices, including nano-superconducting quantum interference devices (nanoSQUIDs), in light of improvements in nanoscale fabrication and manipulation techniques, along with their likely impacts on future quantum technology and measurement. The article first considers efforts to realize devices at the physical scale of 100 nm and below before discussing different types of Josephson junction such as trilayer junctions. It also describes the use of focused ion beam milling and electron beam lithography techniques for junction fabrication at the nanoscale and the improved energy sensitivity detectable with a nanoSQUID. Finally, it looks at a range of applications for nanoSQUIDs, superconducting single photon detectors, and other superconducting nanodevices.

Oxford University Press eBooks•Jul 6, 2017•0 citations

Spatial Resolution Assessment of Nano-SQUIDs Made by Focused Ion Beam

L. Hao, J.C. Macfarlane, John C. Gallop +4 more

The ability to reduce SQUID dimensions into the sub-micrometer or nanometer regime points the way towards novel applications, particularly in emerging fields such as quantum information processing, single-photon/particle detection, and experimental studies of nano-scale entities such as Bose-Einstein condensates. We report here on our ongoing work combining traditional thin-film and photolithographic fabrication processes with computer-aided-design software and focused ion beam milling to realize sub-micrometer superconducting structures. Their magnetic field sensitivity, noise behavior, spatial resolution, and prospects for magnetic spin detection are discussed.

IEEE Transactions on Applied Superconductivity•Jun 1, 2007•16 citations
Due to a growing interest in quantum information processing based on spin systems, the micro-SQUID technique has been finding new interest and fabrication improvements have led to nano-SQUIDs. There are two types of nano-SQUIDs: either the cross section of the Josephson junctions is reduced to about 1 nm by using carbon nanotube junctions, or the loop size is reduced to a few 100 nm. This paper reviews the basic ideas of the micro-SQUID technique applied to magnetic nanostructures and shows that both types of nano-SQUIDs lead to a significant improvement concerning the detection of magnetization switching of individual magnetic particles or molecules.
SQUIDs (superconducting quantum interference devices) have been in use for more than half a century and constitute one of the first macroscopic quantum devices. SQUIDs operating at millikelvin temperatures can act as qubits for quantum computers and the recent reports of more than 50 qubit circuits indicate how far the technology has developed. In this talk, the author will describe two other applications of SQUIDs as quantum detectors, focusing on single spin and single photon energy resolving detection. Most superconducting devices rely on tri-layer Josephson tunnel junctions which are not easily scalable to the nanoscale. We have developed a Josephson junction fabrication method, based on electron beam lithography or focused ion beam milling of a single thin film of superconductor (Nb generally) which can provide sizes down to 50 nm. These devices are particularly relevant for two main applications in quantum technology and metrology. First, by shrinking the size of the SQUID loop and the junctions to around 200 nm, the sensitivity of the SQUID for magnetization measurements is improved to the level where a single electron spin flip may be detected. This is possible at the relatively elevated temperature of 4K.  We are working with Surrey University to implant single magnetic ions within the SQUID loop to provide a platform to test this combination as the basis for a new form of qubit operating at higher temperatures than the conventional Transmon superconducting devices. A second SQUID based detector which we are developing is an inductive transition edge sensor device (ISTED) for energy resolving measurements of single photons. This is based on the development of conventional transition edge sensors where we detect the change of the penetration depth of a small thin film of superconductor when it absorbs a photon. In this way, a major source of noise in conventional TES may be avoided since the absorber remains in the superconducting state at all times. In this way we have demonstrated single photon detection at 633 nm with 0.1eV resolution at operating temperature of 7.5K.
In the present paper, performance of nano-superconducting-quantum-interference devices (SQUIDs) has been investigated in view of their employment in the detection of small spin populations. The analysis has been focused on nano-SQUID sensors having a square loop with a side length of 200 nm. We calculate the spin sensitivity and the magnetic response relative to the single Bohr magneton (single spin), as a function of its position within the SQUID hole. The results show that the SQUID response depends strongly on the spin position; the ratio between the spin sensitivity evaluated in the center of the loop and the minimum one is as high as a factor of 3 for a spin at a reasonable distance z′ of 10 nm from the SQUID plane. Furthermore, the magnetic flux due to several hundred of spins has been evaluated by considering different random spin distributions within the SQUID hole. Due to the both nonuniform SQUID response and the random distribution process, the results show a statistical uncertainty which has been evaluated as a function of the spin number. The estimated informations are very useful to optimize the sensor performance in view of the most nanomagnetism applications.
Large area superconducting quantum interference devices (SQUIDs) are known to be ultimate sensors of magnetic flux. By diminishing the size of a SQUID loop, the energy sensitivity of the device can be increased to near quantum-limited operation whilst also making it less sensitive to external magnetic field noise and improving its coupling to any nano-scale magnetic particle within the loop. This makes it an ideal nano-sensor for magnetic particles including single molecules. It is, however, important to optimize the coupling between any magnetic nano-particle placed within the SQUID and the SQUID itself in order to achieve maximum sensitivity for the spin detection. We have made some preliminary calculations of the expected SQUID response to a magnetic particle placed at different locations within the SQUID device, and using a magnetic tip in a scanning tunnelling microscope (STM) we are able to produce a spatial map of the SQUID sensitivity. Initial results on a 3 µm diameter loop SQUID are presented to demonstrate this method.
We report on the development of highly sensitive SQUIDs featuring sub-micrometer loop dimensions. The integration of high quality and low capacitance SIS Nb/AlO x /Nb cross-type Josephson tunnel junctions results in white flux noise levels as low as 66 n Φ 0 Hz −1/2 , well below state-of-the-art values of their Nb-based counterparts based on constriction type junctions. Estimation of the spin sensitivity of the best SQUIDs yield S μ 1/2 < 7 μ B Hz −1/2 in the white noise region, suitable for the investigation of small spin systems. We discuss fabrication challenges, show results on the electrical characterization of devices with various pickup loops, and describe options for further improvement, which may push the sensitivity of such devices even to single spin resolution.
This article reviews recent progress in superconducting nanodevices, with particular emphasis on fabrication methods developed for superconducting nanowires and nanoscale Josephson junctions based on different barrier materials. It evaluates the future potential of superconducting nanodevices, including nano-superconducting quantum interference devices (nanoSQUIDs), in light of improvements in nanoscale fabrication and manipulation techniques, along with their likely impacts on future quantum technology and measurement. The article first considers efforts to realize devices at the physical scale of 100 nm and below before discussing different types of Josephson junction such as trilayer junctions. It also describes the use of focused ion beam milling and electron beam lithography techniques for junction fabrication at the nanoscale and the improved energy sensitivity detectable with a nanoSQUID. Finally, it looks at a range of applications for nanoSQUIDs, superconducting single photon detectors, and other superconducting nanodevices.
The ability to reduce SQUID dimensions into the sub-micrometer or nanometer regime points the way towards novel applications, particularly in emerging fields such as quantum information processing, single-photon/particle detection, and experimental studies of nano-scale entities such as Bose-Einstein condensates. We report here on our ongoing work combining traditional thin-film and photolithographic fabrication processes with computer-aided-design software and focused ion beam milling to realize sub-micrometer superconducting structures. Their magnetic field sensitivity, noise behavior, spatial resolution, and prospects for magnetic spin detection are discussed.