The family of four-particle systems (${\mathrm{M}}^{+}$${\mathrm{m}}^{+}$${\mathrm{M}}^{\mathrm{\ensuremath{-}}}$${\mathrm{m}}^{\mathrm{\ensuremath{-}}}$) has been studied by means of Monte Carlo techniques. Nonadiabatic explicitly correlated wave functions for different values of the mass ratio M/m have been obtained using a variational Monte Carlo optimization method. These wave functions have been used in diffusion Monte Carlo simulations of (${\mathrm{M}}^{+}$${\mathrm{m}}^{+}$${\mathrm{M}}^{\mathrm{\ensuremath{-}}}$${\mathrm{m}}^{\mathrm{\ensuremath{-}}}$) to compute exact ground-state energies. Our results enlarge the stability range of the mass ratio for these and for similar less symmetric systems and address the problem of the stability of the hydrogen-antihydrogen system. For the special case of the dipositronium molecule (M=m) we report the ground-state energy, consistent with previous accurate calculations, and average values of various observables.
The family of four-particle systems ({\mathrm{M}}^{+}$${\mathrm{m}}^{+}$${\mathrm{M}}^{\mathrm{\ensuremath{-}}}$${\mathrm{m}}^{\mathrm{\ensuremath{-}}}) has been studied by means of Monte Carlo techniques. Nonadiabatic explicitly correlated wave functions for different values of the mass ratio M/m have been obtained using a variational Monte Carlo optimization method. These wave functions have been used in diffusion Monte Carlo simulations of ({\mathrm{M}}^{+}$${\mathrm{m}}^{+}$${\mathrm{M}}^{\mathrm{\ensuremath{-}}}$${\mathrm{m}}^{\mathrm{\ensuremath{-}}}) to compute exact ground-state energies. Our results enlarge the stability range of the mass ratio for these and for similar less symmetric systems and address the problem of the stability of the hydrogen-antihydrogen system. For the special case of the dipositronium molecule (M=m) we report the ground-state energy, consistent with previous accurate calculations, and average values of various observables.
Describing correlated electron systems has been a major challenge in computational condensed-matter physics. Quantum Monte Carlo, a powerful computational tool for the study of correlated systems, solves electron correlation problems explicitly. It has been taken as a benchmark method for understanding the correlated systems. Instead of making approximations to Hamiltonian, QMC methods work with the wave functions, and the computational cost scales well with the system size. With the development of parallel computing, QMC calculations on large systems are becoming more and more feasible. We have investigated two correlated systems with highly accurate fixed node QMC techniques. The first system is a correlated hydrogen model system near the metal to insulator transition. We have successfully identified the transition point by calculating spin and charge properties and analyzing the low energy Hilbert space. The second one is a strongly correlated Fe/O system. Calculations on the Fe atoms, O atoms, and FeO molecules are conducted with multiple highly accurate many-body techniques. The source of errors has been disentangled by comparing the results of the many body techniques with the experimental results. For the Fe and O atoms, the calculated properties coincide well with previous experimental results. For the basis-based techniques, the performance is mainly limited by the basis set. The calculated equilibrium bond length, excitation energy and vibrational frequency of the FeO molecules are also in close agreement with the known values from previous experiments.
Introduction In Chapters 1 to 4 we studied methods for solving the Schrödinger equation for many-electron systems. Many of the techniques described there carry over to other quantum many-particle systems, such as liquid helium, and the protons and neutrons in a nucleus. The techniques which we discussed there were, however, all of a mean-field type and therefore correlation effects could not be taken into account without introducing approximations. In this chapter, we consider more accurate techniques, which are similar to those studied in Chapter 10 and are based on using (pseudo-)random numbers – hence the name ‘Monte Carlo’ for these methods. In Chapter 10 we applied Monte Carlo techniques to classical many-particle systems; here we use these techniques for studying quantum problems involving many particles. In the next section we shall see how we can apply Monte Carlo techniques to the problem of calculating the quantum mechanical expectation value of the ground state energy. This is used in order to optimise this expectation value by adjusting a trial wave function in a variational type of approach, hence the name variational Monte Carlo (VMC). In the following section we use the similarity between the Schrödinger equation and the diffusion equation in order to calculate the properties of a collection of interacting quantum mechanical particles by simulating a classical particle diffusion process. The resulting method is called diffusion Monte Carlo (DMC).
We study systems of particles with varying numbers of distinguishable species ranging from 4-species to the N-species limit, where N is the number of particles in the system itself. We examine these systems using various powerful simulation techniques that belong to the quantum Monte Carlo (QMC) family. The N-species limit is studied via Path Integral Monte Carlo (PIMC), which is a finite temperature, non-perturbative technique. At this limit, we explore the viability of two different thermal density matrices for systems that interact via hard-sphere, hard-cavity potentials. We then study the impact of finite-size effects on calculations of the energy, pressure and specific heat of the system when reaching the thermodynamic limit under periodic boundary conditions. We then move to studying a 4-species fermionic system using Variational Monte Carlo (VMC) and Diffusion Monte Carlo (DMC), which are ground state techniques. We apply these methods to the clustering problem of 4-particle and 8-particle systems. While the 4-particle, 4-species system is relatively simple to calculate as it is physically identical to a bosonic system of 4-particles, the 8-particle fermi system is more complicated. We detail the process of simulating a bound 8-particle state with respect to decay into two independent 4-particle clusters with DMC for the first time.
Quantum Monte Carlo has recently made great progress as a computational tool for quantum many-body systems. We have extended previous Monte Carlo methods to study both ground state and excited states of the two-dimensional electron gas. For ground state properties we have used variational and fixed-node diffusion Monte Carlo methods, the latter of which is a nearly exact method for a system of many fermions. With introduction of backflow and three-body correlations, we find significant improvements in both variational and fixed-node energies over the Slater-Jastrow results which consider only two-body correlations. It is found that the backflow effect is dominant over the three-body effect at high density ($r\sb{s} \sim 1)$ while they are of equal importance at the lowest density considered $(r\sb{s} \sim 20)$. The effects are comparable to those in bulk $\sp3$He. The numerical results are used to provide an analytic expression for the correlation energy of the two-dimensional electron gas as a function of the density. For particle-hole excitations of the system, variational Monte Carlo is employed. Correlated sampling is introduced to calculate small energy differences between different excitations. The usual pair-product (Slater-Jastrow) trial wave function is found to lack certain correlations entirely so that backflow correlation is crucial. From the excitation energies calculated here, we determine Fermi liquid parameters and related physical quantities such as the effective mass and Lande g factor of the two-dimensional electron gas, which are compared with previous analytic calculations. Finally, the validity of our fixed-node calculations for the ground state and variational ones for the excitations is tested by transient-estimate calculations, which allow for relaxation of the fixed-node conditions.
Quantum chemistry is a useful tool that provides insight into the properties and behavior of chemical systems. Modern software packages have made quantum chemistry methods more easily accessible, and the continued increase in available computational resources has allowed them to be applied to larger systems at higher levels of theory. Two significant problems that the field faces are the high computational complexity of high-level methods and the shift toward parallelism in high performance computing architectures. This work examines the treatment of weakly interacting molecular systems with the fixed-node diffusion Monte Carlo (DMC) method. DMC and other quantum Monte Carlo (QMC) methods offer a possible solution to both of the aforementioned problems: they can produce near-exact results with a lower scaling (with respect to problem size) than other similarly-accurate methods, and they are inherently parallel, so there is little additional cost associated with distributing the work of a single QMC calculation across a large number of processing units. The only error in DMC that is not systematically improvable is the constraint of a fixed nodal surface of the many-particle wave function of the system being studied. There are many cases in which a single Slater determinant trial function is sufficient to obtain accurate results, but there are others in which more sophisticated multi-determinant trial functions are necessary. Furthermore, it is non-trivial to generate nodal surfaces of similar quality for isolated and interacting molecules, so cancellation of errors is not guaranteed. We examine the use of different single- and multi-determinant trial functions in DMC calculations on small chemical systems with the goal of further understanding how to construct appropriate trial functions for molecules and clusters.
Quantum Monte Carlo methods are accurate and promising many body techniques for electronic structure calculations which, in the last years, are encountering a growing interest thanks to their favorable scaling with the system size and their efficient parallelization, particularly suited for the modern high performance computing facilities. The ansatz of the wave function and its variational flexibility are crucial points for both the accurate description of molecular properties and the capabilities of the method to tackle large systems. In this paper, we extensively analyze, using different variational ansatzes, several properties of the water molecule, namely, the total energy, the dipole and quadrupole momenta, the ionization and atomization energies, the equilibrium configuration, and the harmonic and fundamental frequencies of vibration. The investigation mainly focuses on variational Monte Carlo calculations, although several lattice regularized diffusion Monte Carlo calculations are also reported. Through a systematic study, we provide a useful guide to the choice of the wave function, the pseudopotential, and the basis set for QMC calculations. We also introduce a new method for the computation of forces with finite variance on open systems and a new strategy for the definition of the atomic orbitals involved in the Jastrow-Antisymmetrised Geminal power wave function, in order to drastically reduce the number of variational parameters. This scheme significantly improves the efficiency of QMC energy minimization in case of large basis sets.