Describing correlated electron systems has been a major challenge in computational condensed-matter physics. Quantum Monte Carlo, a powerful computational tool for the study of correlated systems, solves electron correlation problems explicitly. It has been taken as a benchmark method for understanding the correlated systems. Instead of making approximations to Hamiltonian, QMC methods work with the wave functions, and the computational cost scales well with the system size. With the development of parallel computing, QMC calculations on large systems are becoming more and more feasible. We have investigated two correlated systems with highly accurate fixed node QMC techniques. The first system is a correlated hydrogen model system near the metal to insulator transition. We have successfully identified the transition point by calculating spin and charge properties and analyzing the low energy Hilbert space. The second one is a strongly correlated Fe/O system. Calculations on the Fe atoms, O atoms, and FeO molecules are conducted with multiple highly accurate many-body techniques. The source of errors has been disentangled by comparing the results of the many body techniques with the experimental results. For the Fe and O atoms, the calculated properties coincide well with previous experimental results. For the basis-based techniques, the performance is mainly limited by the basis set. The calculated equilibrium bond length, excitation energy and vibrational frequency of the FeO molecules are also in close agreement with the known values from previous experiments.
Describing correlated electron systems has been a major challenge in computational condensed-matter physics. Quantum Monte Carlo, a powerful computational tool for the study of correlated systems, solves electron correlation problems explicitly. It has been taken as a benchmark method for understanding the correlated systems. Instead of making approximations to Hamiltonian, QMC methods work with the wave functions, and the computational cost scales well with the system size. With the development of parallel computing, QMC calculations on large systems are becoming more and more feasible. We have investigated two correlated systems with highly accurate fixed node QMC techniques. The first system is a correlated hydrogen model system near the metal to insulator transition. We have successfully identified the transition point by calculating spin and charge properties and analyzing the low energy Hilbert space. The second one is a strongly correlated Fe/O system. Calculations on the Fe atoms, O atoms, and FeO molecules are conducted with multiple highly accurate many-body techniques. The source of errors has been disentangled by comparing the results of the many body techniques with the experimental results. For the Fe and O atoms, the calculated properties coincide well with previous experimental results. For the basis-based techniques, the performance is mainly limited by the basis set. The calculated equilibrium bond length, excitation energy and vibrational frequency of the FeO molecules are also in close agreement with the known values from previous experiments.
Quantum Monte Carlo (QMC) is a powerful computational tool to study correlated systems of electrons, allowing us to explicitly treat many-body interactions with favorable scaling in the number of particles. It has been regarded as a benchmark tool for condensed matter systems containing elements from the first and second row of the periodic table. It holds particular promise for the more complicated transition metals, because QMC treats the correlations between electrons explicitly, and has a computational cost that scales well with the system size.
We have developed a QMC framework that is capable of simulating systems containing many electrons efficiently, through advanced algorithms and parallel operation. This framework includes a QMC program using state of the art methods that make many interesting quantities available.
We apply a method of finding the minimum and other properties of the potential energy surface in the face of stochastic noise using Bayesian inference and the total energy. We apply these developments to several transition metal systems, including the first five transition metal monoxide molecules and two interesting ABO3 perovskite solids: BaTiO3 and BiFeO3.
Where experiment is available, QMC is generally in agreement with a few exceptions that are discussed. In the case where experiment is unavailable, it makes predictions that can help us understand somewhat ambiguous experimental results.
Quantum Monte Carlo (QMC) is one of the most promising methods for solving quantum many-body problems. QMC combines known analytical properties of wave functions, results from other methods, and stochastic techniques, into a powerful tool for investigation of the electronic structure of real materials. Furthermore, the method has a favorable scaling ( O[N3] in the number of electrons), perfect scalability on parallel architectures, and can be applied to a wide range of systems. Our work has focused both on expanding the capabilities of QMC for calculation of quantities beyond energies, such as interatomic forces, and on application of the method to challenging problems in nanostructure materials research. For the calculation of interatomic forces we have implemented a finite difference correlated sampling method. The correlated sampling enables us to avoid the problem of statistical noise in evaluating the energy differences and allows us to obtain forces with an average 1% error. We have analyzed the effect of the method's main approximations on the estimate of the forces, both by theoretical arguments and by performing a variety of tests on small systems. Furthermore, we have used this newly developed method for estimating equilibrium geometries in a problem where other methods have failed. QMC enabled us to treat the electron correlation effects with high accuracy and to provide accurate predictions in a number of interesting applications. In particular, for carbon rings of C4N+2 stoichiometry we have resolved a long-standing problem regarding the competition between the aromaticity and second order Jahn-Teller effects. We have found that the dominant mechanism at small and intermediate sizes, which stabilizes the bond angle and bond length alternated geometries, is the secondorder Jahn-Teller effect while the aromatic isomer is always found to be a transition state. These high accuracy calculations which have involved multi-reference wave functions, extensive variational optimizations, and the use of massively parallel platforms demonstrate clearly the unique capabilities of the QMC approach.
Electronic structure quantum Monte Carlo Quantum Monte Carlo (QMC) is an advanced simulation methodology for studies of manybody quantum systems. The QMC approaches combine analytical insights with stochastic computational techniques for efficient solution of several classes of important many-body problems such as the stationary Schrödinger equation. QMC methods of various flavors have been applied to a great variety of systems spanning continuous and lattice quantum models, molecular and condensed systems, BEC-BCS ultracold condensates, nuclei, etc. In this review, we focus on the electronic structure QMC, i.e., methods relevant for systems described by the electron-ion Hamiltonians. Some of the key QMC achievements include direct treatment of electron correlation, accuracy in predicting energy differences and favorable scaling in the system size. Calculations of atoms, molecules, clusters and solids have demonstrated QMC applicability to real systems with hundreds of electrons while providing 90-95% of the correlation energy and energy differences typically within a few percent of experiments. Advances in accuracy beyond these limits are hampered by the so-called fixed-node approximation which is used to circumvent the notorious fermion sign problem. Many-body nodes of fermion states and their properties have therefore become one of the important topics for further progress in predictive power and efficiency of QMC calculations. Some of our recent results on the wave function nodes and related nodal domain topologies will be briefly reviewed. This includes analysis of few-electron systems and descriptions of exact and approximate nodes using transformations and projections of the highly-dimensional nodal hypersurfaces into the 3D space. Studies of fermion nodes offer new insights into topological properties of eigenstates such as explicit demonstrations that generic fermionic ground states exhibit the minimal number of two nodal domains. Recently proposed trial wave functions based on Pfaffians with pairing orbitals are presented and their nodal properties are tested in calculations of first row atoms and molecules. Finally, backflow "dressed" coordinates are introduced as another possibility for capturing correlation effects and for decreasing the fixed-node bias.
The study of strongly correlated quantum many-body systems is an outstanding challenge. Highly accurate results are needed for the understanding of practical and fundamental problems in condensed-matter physics, high energy physics, material science, quantum chemistry and so on. Our familiar mean-field or perturbative methods tend to be ineffective. Numerical simulations provide a promising approach for studying such systems. The fundamental difficulty of numerical simulation is that the dimension of the Hilbert space needed to describe interacting systems increases exponentially with the system size. Quantum Monte Carlo (QMC) methods are one of the best approaches to tackle the problem of enormous Hilbert space. They have been highly successful for boson systems and unfrustrated spin models. For systems with fermions, the exchange symmetry in general causes the infamous sign problem, making the statistical noise in the computed results grow exponentially with the system size. This hinders our understanding of interesting physics such as high-temperature superconductivity, metal-insulator phase transition. In this thesis, we present a variety of new developments in the auxiliary-field quantum Monte Carlo (AFQMC) methods, including the incorporation of symmetry in both the trial wave function and the projector, developing the constraint release method, using the force-bias to drastically improve the efficiency in Metropolis framework, identifying and solving the infinite variance problem, and sampling Hartree-Fock-Bogoliubov wave function. With these developments, some of the most challenging many-electron problems are now under control. We obtain an exact numerical solution of two-dimensional strongly interacting Fermi atomic gas, determine the ground state properties of the 2D Fermi gas with Rashba spin-orbit coupling, provide benchmark results for the ground state of the two-dimensional Hubbard model, and establish that the Hubbard model has a stripe order in the underdoped region.
Quantum Monte Carlo (QMC) methods sample the wave function, in principle the exact one, instead of optimizing analytical functions as standard ab initio approaches. They have emerged as suitable alternative to ab initio methods to deal with the dynamical correlation in the description of the electronic structure of atoms and molecules. Differently from standard quantum chemistry approaches, QMC enjoys several features that make it the method of choice for complicated systems. Among these features, it is important to notice its intrinsically parallelizable nature, the slow (˜N 3 ) scaling of the computational cost with number of particles N, the limited amount of memory required and its ability to deal with substantially different systems within the same theoretical/algorithmic structure (e.g. it can be easily applied to both bosons and fermions, to the description of systems containing electrons and positrons as well as of vibrational properties of molecules). One of the strongest points characterizing QMC is the fact that it may use any kind of basis sets, albeit uncommon ones, depending on the species. This fact allows QMC either to quickly converge to the exact answer in the case of bosonic systems, or to easily recover 90–95% of the correlation energy in electronic species without the inverse cubic convergence with respect to the size of the basis set that plagues more common ab initio methods. Thanks to these characteristics, different flavours of QMC have been applied to a wide set of species/problems spanning a range that stretches from molecules as small as water up to pieces of bulk matter as large as silicon and germanium crystals and that includes molecules such as porphyrins and C 20 . Despite the strong points highlighted, QMC suffers from a relatively high computational cost mainly due to the necessity of evaluating many times a reference wave function. Thus, a substantial reduction of this cost may come from central processing units (CPU) particularly tailored to compute exponentials, polynomials and rational functions, from better algorithms that require less function evaluations and from variance reduction techniques. Besides, more robust approaches to reduce the so called “nodal error” would help improve the already appreciable accuracy afforded by QMC. With the above issues improved, there are several avenues that would become possible to pursue on a routine basis. Among these, we foresee the calculations of intermolecular interactions for very large systems (e.g. parts of DNA with or without interacting species), the calculation of nuclear magnetic resonance (NMR) parameters for difficult systems, the automatic optimization of molecular structures and, even better, the chance of running molecular dynamics simulation à la Car–Parrinello using QMC computed atomic forces. In these circumstances, the study of phase transitions, bulk matter, interfaces and large biological systems may reach an unexpected level of accuracy that is currently unavailable due to methodological limitations.
The many-body correlation between electrons is the origin of many fascinating phenomena in condensed matter systems, such as high temperature superconductivity, superfluidity, fractional quantum Hall effect, and Mott insulator. Strongly correlated systems have been an important subject of condensed matter physics for several decades, especially after the discovery of high temperature cuprate superconductors. In this thesis, we apply first principles quantum Monte Carlo (QMC) method to several representative systems to study the electron correlations in transition metal oxides (vanadium dioxide) and low dimensional electronic systems (graphene and graphene-like two dimensional systems). Vanadium dioxide (VO2) is a paradigmatic example of a strongly correlated system that undergoes a metal-insulator transition at a structural phase transition. To date, this transition has necessitated significant post-hoc adjustments to theory in order to be described properly. We apply first principles quantum Monte Carlo (QMC) to study the structural dependence of the properties of VO2. Using this technique, we simulate the interactions between electrons explicitly, which allows for the metal-insulator transition to naturally emerge, importantly without ad-hoc adjustments. The QMC calculations show that the structural transition directly causes the metal-insulator transition and a change in the coupling of vanadium spins. This change in the spin coupling results in a prediction of a momentum-independent magnetic excitation in the insulating state. While two-body correlations are important to set the stage for this transition, they do not change significantly when VO2 becomes an insulator. These results show that it is now possible to account for electron correlations in a quantitatively accurate way that is also specific to materials. Electron correlation in graphene is unique because of the interplay of the Dirac cone dispersion of pi electrons with long range Coulomb interaction. The random phase approximation predicts no metallic screening at long distances and low energies because of the zero density of states at Fermi level. It is thus interesting to see how screening takes place in graphene at different length scales. We addressed this problem by computing the structure factor S(q) and S(q, ω) of freestanding graphene using ab initio fixed-node diffusion Monte Carlo and the random phase approximation. The X-ray measured structure factor is reproduced very accurately using both techniques, provided that sigma-bonding electrons are included in the simulations. Strong dielectric screening from sigma electrons are observed, which redshifts the pi plasmons resonance frequency at long distance and reduces the effective interactions between pi electrons at short distance. The short distance screening makes suspended graphene a weakly correlated semimetal which otherwise would be an insulator. The third piece of works is dedicated to studying the low energy excitation of many-body systems using extended Koopmans' theorem (EKT). The EKT provides a straight forward way to compute charge excitation spectra, such as ionization potentials, electron affinities from any level of theory. We implemented the EKT within the QMC framework, and performed systematic benchmark studies of ionization potentials of the second- and third-row atoms, and closed- and open-shell molecules. We also applied it to compute the quasiparticle band structure of solids (graphene). For complex correlated systems, identifying relevant low energy physics degrees of freedom is extremely important to understanding the system's collective behavior at different length scales. In this sense, bridging the realistic systems to lower energy effective lattice models that involve fewer but important degrees of freedom is significant to understanding correlated systems. We have formulated three ab initio density matrix based downfolding (AIDMD) methods to downfold the ab initio systems into effective lattice models. We have demonstrated the successfulness of these methods by applying them to molecules (H2) and periodic systems (hydrogen chain and graphene).