Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

ROBUST OPTICAL DESIGN OF ANGLED MULTILAYER DIELECTRIC MIRRORS OPTIMIZED FOR RUBIDIUM VAPOR CELL RETURN REFLECTION

John E. Kitching, MicroSystems Labratory

Published Aug 1, 2008• 0 citations
OpenAlex

Abstract

This paper reports on the design and implementation of thin film multilayer dielectric to form Bragg reflectors on the sidewalls of micromachined atomic cells. Due to deposition shadowing, significant variations in the thicknesses of the thin films are encountered when the layers are deposited using PECVD. These gradients in thickness may limit optical performance of the reflector in atomic cells. An optimized design procedure is described to maximize the performance of the reflector at a wavelength of 795 nm under the variations in material thickness. In addition, an optical design based on two shifted quarter wave Bragg reflectors in series is used to form a reflector with extended optical bandwidth for added robustness. The extended reflectance range maintains high reflection at the D1 absorption wavelength of 87 Rb despite variations in uniformity greater than 70 %. The developed reflector technology is ideally suited for use in miniature rubidium vapor cells. We demonstrate less than 1.5 dB of return loss with circular polarization ellipticity maintained to ±2 ◦ is demonstrated, as

Related papers

Microfabricated Vapor Cells with Reflective Sidewalls for Chip Scale Atomic Sensors

Runqi Han, Zheng You, Fan Zhang +2 more

We investigate the architecture of microfabricated vapor cells with reflective sidewalls for applications in chip scale atomic sensors. The optical configuration in operation is suitable for both one-beam and two-beam (pump & probe) schemes. In the miniaturized vapor cells, the laser beam is reflected twice by the aluminum reflectors on the wet etched 54.7° sidewalls to prolong the optical length significantly, thus resulting in a return reflectance that is three times that of bare silicon sidewalls. To avoid limitations faced in the fabrication process, a simpler, more universal and less constrained fabrication process of microfabricated vapor cells for chip scale atomic sensors with uncompromised performance is implemented, which also decreases the fabrication costs and procedures. Characterization measurements show that with effective sidewall reflectors, mm³ level volume and feasible hermeticity, the elongated miniature vapor cells demonstrate a linear absorption contrast improvement by 10 times over the conventional micro-electro-mechanical system (MEMS) vapor cells at ~50 °C in the rubidium D1 absorption spectroscopy experiments. At the operating temperature of ~90 °C for chip scale atomic sensors, a 50% linear absorption contrast enhancement is obtained with the reflective cell architecture. This leads to a potential improvement in the clock stability and magnetometer sensitivity. Besides, the coherent population trapping spectroscopy is applied to characterize the microfabricated vacuum cells with 46.3 kHz linewidth in the through cell configuration, demonstrating the effectiveness in chip scale atomic sensors.

Micromachines•Apr 11, 2018•31 citations

Rubidium vapor cell spectroscopy by selective reflection approach

A. Mirzaei, S.M. Hamidi

Selective-reflection ellipsometry from miniaturized rubidium vapor cells is investigated numerically and experimentally as a phase-sensitive extension of conventional selective-reflection spectroscopy. While most previous studies of selective reflection have mainly focused on scalar reflectivity and line-shape analysis, the present work analyzes the reflected p- and s-polarized fields through the ellipsometric parameters \(\:{\Psi\:}\) and \(\:{\Delta\:}\) . The reflected field from a finite rubidium vapor layer is calculated using a Fourier-series expansion of the coupled field–polarization equations for vapor-layer thicknesses ranging from \(\:L=\lambda\:/2\) to \(\:L=9\lambda\:/4\) , where \(\:\lambda\:=795\:\text{n}\text{m}\) . The numerical results show that wavelength-scale changes in the vapor-layer thickness modify the selective-reflection spectrum and produce thickness-dependent resonant features. The calculated \(\:{\Psi\:}\) and \(\:{\Delta\:}\) spectra exhibit inverse-like behavior at complementary incidence angles, including \(\:{30}^{\circ\:}{,60}^{\circ\:}\) and \(\:{37}^{\circ\:},{53}^{\circ\:}\) . This behavior is interpreted as the combined result of angle-dependent optical path, wavelength-scale phase accumulation, Fabry–Pérot-type thin-layer interference, and resonant near-surface atomic polarization associated with selective reflection. Experimentally, the ellipsometric parameters are extracted from p- and s-polarized reflection measurements performed on a fabricated \(\:50\:\mu\:\text{m}\) rubidium microcell. The experimental spectra support the physical observability of the complementary-angle ellipsometric response in a real miniaturized vapor-cell geometry. These results show that selective-reflection ellipsometry can provide a useful phase-sensitive approach for studying resonant optical responses in confined atomic vapor layers and offers a useful platform for compact spectroscopy, laser stabilization, and atom–surface interaction studies.

Scientific Reports•Aug 7, 2026•0 citations

A Reflection Type Vapor Cell Based on Local Anodic Bonding of 45° Mirrors for Micro Atomic Clocks

Hitoshi Nishino, Masaya Toda, Yuichiro Yano +4 more

This paper reports the design, fabrication and evaluation of a reflection-type micro Rb vapor cell fabricated by local anodic bonding of small 45° mirrors. The 45° mirrors with a Bragg reflector are fabricated by using dicing process. The vapor cells having a horizontal cavity with the 45° mirrors at the both ends are fabricated by anodic bonding process. Optical absorption of Rb and CPT (Coherent Population Trapping) resonance for atomic clock operation are evaluated.

International Conference on Solid-State Sensors, Actuators and Microsystems•Jun 1, 2019•6 citations

Nonperturbative theory of thin-vapor-layer linear optical properties: towards the optimal design of alkali-metal vapor nanocells

Andrei Ermolaev, T. A. Vartanyan

Hot alkali-metal vapors confined inside nanometer-thick spectroscopic cells are highly suitable media for miniature and cheap frequency standards, magnetometers and atomic sensors. Yet their linear optical properties at low to moderate atomic densities are not fully understood. The main reason is the complex, strongly nonlocal optical response of such systems to resonant radiation, which arises from the free motion of atoms and their collisions with the walls. To date, calculations of reflection and transmission spectra of these cells have been restricted to perturbation theory in the atomic density for the case of quenching atom-wall collisions, which has substantially limited their practical use. Here we introduce a rigorous numerical approach for computing thin-vapor-layer spectra that accurately accounts for the nonlocal optical response at arbitrary optical density and layer thickness. Our model predicts a density-dependent blue shift of the resonance that is absent in the first-order perturbative description. We show that its values are comparable to the homogeneous width of an atomic transition and, therefore, too large to be neglected in most cases. Next, inspired by recent experiments, we explore a wide range of vapor layer thicknesses and study how the reflectivity and its derivative with respect to the laser detuning depend on the layer thickness. We obtain an approximate expression for the thickness maximising the first derivative of the reflectivity that agrees closely with the rigorous numerical model and reduces to the first-order analytical result showing the optima at $l=λ/3+nλ$ and $l=2λ/3+nλ$, where $n$ is a non-negative integer. These results provide a practical design tool for nanometer-thick spectroscopic cells in various applications and a starting point for further development of the theory.

arXiv:2611.00400•Oct 30, 2026•0 citations

Laser light routing in an elongated micromachined vapor cell with diffraction gratings for atomic clock applications

Ravinder Chutani, Vincent N. Maurice, Nicolas Passilly +7 more

This paper reports on an original architecture of microfabricated alkali vapor cell designed for miniature atomic clocks. The cell combines diffraction gratings with anisotropically etched single-crystalline silicon sidewalls to route a normally-incident beam in a cavity oriented along the substrate plane. Gratings have been specifically designed to diffract circularly polarized light in the first order, the latter having an angle of diffraction matching the (111) sidewalls orientation. Then, the length of the cavity where light interacts with alkali atoms can be extended. We demonstrate that a longer cell allows to reduce the beam diameter, while preserving the clock performances. As the cavity depth and the beam diameter are reduced, collimation can be performed in a tighter space. This solution relaxes the constraints on the device packaging and is suitable for wafer-level assembly. Several cells have been fabricated and characterized in a clock setup using coherent population trapping spectroscopy. The measured signals exhibit null power linewidths down to 2.23 kHz and high transmission contrasts up to 17%. A high contrast-to-linewidth ratio is found at a linewidth of 4.17 kHz and a contrast of 5.2% in a 7-mm-long cell despite a beam diameter reduced to 600 μm.

Scientific Reports•Sep 14, 2015•56 citations

Reflection-type vapor cell for micro atomic clocks using local anodic bonding of 45° mirrors

Hitoshi Nishino, Yuichiro Yano, Motoaki Hara +4 more

This Letter reports the design, fabrication, and evaluation of reflection-type planar vapor cells for chip-scale atomic clocks. The cell with 2-8 mm cavity length contains two 45° Bragg reflector mirrors assembled using a local anodic bonding. Coherent population trapping resonance of Rb atoms is observed, realizing an atomic clock operation. Allan deviations at an averaging time of 1 s are ${2.2} \times {{1}}{{{0}}^{- 10}}$ and ${9.5} \times {{1}}{{{0}}^{- 11}}$ for 2 mm long and 6 mm long vapor cells, respectively. These results show that planar vapor cells compatible with a system-in-package are feasible without degradation of clock stabilities compared to conventional vertically stacked cells.

Optics Letters•Apr 15, 2021•18 citations
This paper reports on the design and implementation of thin film multilayer dielectric to form Bragg reflectors on the sidewalls of micromachined atomic cells. Due to deposition shadowing, significant variations in the thicknesses of the thin films are encountered when the layers are deposited using PECVD. These gradients in thickness may limit optical performance of the reflector in atomic cells. An optimized design procedure is described to maximize the performance of the reflector at a wavelength of 795 nm under the variations in material thickness. In addition, an optical design based on two shifted quarter wave Bragg reflectors in series is used to form a reflector with extended optical bandwidth for added robustness. The extended reflectance range maintains high reflection at the D1 absorption wavelength of 87 Rb despite variations in uniformity greater than 70 %. The developed reflector technology is ideally suited for use in miniature rubidium vapor cells. We demonstrate less than 1.5 dB of return loss with circular polarization ellipticity maintained to ±2 ◦ is demonstrated, as
We investigate the architecture of microfabricated vapor cells with reflective sidewalls for applications in chip scale atomic sensors. The optical configuration in operation is suitable for both one-beam and two-beam (pump & probe) schemes. In the miniaturized vapor cells, the laser beam is reflected twice by the aluminum reflectors on the wet etched 54.7° sidewalls to prolong the optical length significantly, thus resulting in a return reflectance that is three times that of bare silicon sidewalls. To avoid limitations faced in the fabrication process, a simpler, more universal and less constrained fabrication process of microfabricated vapor cells for chip scale atomic sensors with uncompromised performance is implemented, which also decreases the fabrication costs and procedures. Characterization measurements show that with effective sidewall reflectors, mm³ level volume and feasible hermeticity, the elongated miniature vapor cells demonstrate a linear absorption contrast improvement by 10 times over the conventional micro-electro-mechanical system (MEMS) vapor cells at ~50 °C in the rubidium D1 absorption spectroscopy experiments. At the operating temperature of ~90 °C for chip scale atomic sensors, a 50% linear absorption contrast enhancement is obtained with the reflective cell architecture. This leads to a potential improvement in the clock stability and magnetometer sensitivity. Besides, the coherent population trapping spectroscopy is applied to characterize the microfabricated vacuum cells with 46.3 kHz linewidth in the through cell configuration, demonstrating the effectiveness in chip scale atomic sensors.
Selective-reflection ellipsometry from miniaturized rubidium vapor cells is investigated numerically and experimentally as a phase-sensitive extension of conventional selective-reflection spectroscopy. While most previous studies of selective reflection have mainly focused on scalar reflectivity and line-shape analysis, the present work analyzes the reflected p- and s-polarized fields through the ellipsometric parameters  Ψ \:{\Psi\:}Ψ and  Δ \:{\Delta\:}Δ . The reflected field from a finite rubidium vapor layer is calculated using a Fourier-series expansion of the coupled field–polarization equations for vapor-layer thicknesses ranging from  L=λ /2\:L=\lambda\:/2L=λ/2 to  L=9λ /4\:L=9\lambda\:/4L=9λ/4 , where  λ =795 nm\:\lambda\:=795\:\text{n}\text{m}λ=795nm . The numerical results show that wavelength-scale changes in the vapor-layer thickness modify the selective-reflection spectrum and produce thickness-dependent resonant features. The calculated  Ψ \:{\Psi\:}Ψ and  Δ \:{\Delta\:}Δ spectra exhibit inverse-like behavior at complementary incidence angles, including  30∘ ,60∘ \:{30}^{\circ\:}{,60}^{\circ\:}30∘,60∘ and  37∘ ,53∘ \:{37}^{\circ\:},{53}^{\circ\:}37∘,53∘ . This behavior is interpreted as the combined result of angle-dependent optical path, wavelength-scale phase accumulation, Fabry–Pérot-type thin-layer interference, and resonant near-surface atomic polarization associated with selective reflection. Experimentally, the ellipsometric parameters are extracted from p- and s-polarized reflection measurements performed on a fabricated  50 μ m\:50\:\mu\:\text{m}50μm rubidium microcell. The experimental spectra support the physical observability of the complementary-angle ellipsometric response in a real miniaturized vapor-cell geometry. These results show that selective-reflection ellipsometry can provide a useful phase-sensitive approach for studying resonant optical responses in confined atomic vapor layers and offers a useful platform for compact spectroscopy, laser stabilization, and atom–surface interaction studies.
Hot alkali-metal vapors confined inside nanometer-thick spectroscopic cells are highly suitable media for miniature and cheap frequency standards, magnetometers and atomic sensors. Yet their linear optical properties at low to moderate atomic densities are not fully understood. The main reason is the complex, strongly nonlocal optical response of such systems to resonant radiation, which arises from the free motion of atoms and their collisions with the walls. To date, calculations of reflection and transmission spectra of these cells have been restricted to perturbation theory in the atomic density for the case of quenching atom-wall collisions, which has substantially limited their practical use. Here we introduce a rigorous numerical approach for computing thin-vapor-layer spectra that accurately accounts for the nonlocal optical response at arbitrary optical density and layer thickness. Our model predicts a density-dependent blue shift of the resonance that is absent in the first-order perturbative description. We show that its values are comparable to the homogeneous width of an atomic transition and, therefore, too large to be neglected in most cases. Next, inspired by recent experiments, we explore a wide range of vapor layer thicknesses and study how the reflectivity and its derivative with respect to the laser detuning depend on the layer thickness. We obtain an approximate expression for the thickness maximising the first derivative of the reflectivity that agrees closely with the rigorous numerical model and reduces to the first-order analytical result showing the optima at l=λ/3+nλl=λ/3+nλl=λ/3+nλ and l=2λ/3+nλl=2λ/3+nλl=2λ/3+nλ, where nnn is a non-negative integer. These results provide a practical design tool for nanometer-thick spectroscopic cells in various applications and a starting point for further development of the theory.
This paper reports on an original architecture of microfabricated alkali vapor cell designed for miniature atomic clocks. The cell combines diffraction gratings with anisotropically etched single-crystalline silicon sidewalls to route a normally-incident beam in a cavity oriented along the substrate plane. Gratings have been specifically designed to diffract circularly polarized light in the first order, the latter having an angle of diffraction matching the (111) sidewalls orientation. Then, the length of the cavity where light interacts with alkali atoms can be extended. We demonstrate that a longer cell allows to reduce the beam diameter, while preserving the clock performances. As the cavity depth and the beam diameter are reduced, collimation can be performed in a tighter space. This solution relaxes the constraints on the device packaging and is suitable for wafer-level assembly. Several cells have been fabricated and characterized in a clock setup using coherent population trapping spectroscopy. The measured signals exhibit null power linewidths down to 2.23 kHz and high transmission contrasts up to 17%. A high contrast-to-linewidth ratio is found at a linewidth of 4.17 kHz and a contrast of 5.2% in a 7-mm-long cell despite a beam diameter reduced to 600 μm.
This Letter reports the design, fabrication, and evaluation of reflection-type planar vapor cells for chip-scale atomic clocks. The cell with 2-8 mm cavity length contains two 45° Bragg reflector mirrors assembled using a local anodic bonding. Coherent population trapping resonance of Rb atoms is observed, realizing an atomic clock operation. Allan deviations at an averaging time of 1 s are 2.2×10−10{2.2} \times {{1}}{{{0}}^{- 10}}2.2×10−10 and 9.5×10−11{9.5} \times {{1}}{{{0}}^{- 11}}9.5×10−11 for 2 mm long and 6 mm long vapor cells, respectively. These results show that planar vapor cells compatible with a system-in-package are feasible without degradation of clock stabilities compared to conventional vertically stacked cells.