Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

Ultrafast, integrable, optics-based interface between superconducting and room-temperature electronics

Chia-Chi Wang, Marc Currie, T.Y. Hsiang

Published Jun 1, 1995• 5 citations
Publisher

Abstract

An ultrafast optical interface between superconducting and room-temperature electronics is proposed to take full advantage of high-speed superconducting circuits. We report on the computed and experimental studies of an optical receiving and modulating system that is compatible in processing with the prevailing integrated-superconducting-circuit technology. Planar interdigitated Nb/Si/Nb metal-semiconductor-metal (MSM) photodiodes are demonstrated as optical receivers with resolvable bit-rate as high as 38 Gb/s, and the response of MSM diode was shaped to be a single-flux-quantum pulse to drive Josephson-junction-based circuits. A similar interdigitated structure on a silicon waveguide is proposed to be an ultrafast light-intensity modulator, with its operation based on carrier-density modulation of the optical index of refraction. This field-effect device has insignificant power dissipation, in addition to high speed. A sample modulator with 5-V bias is shown to have a modulation depth of 40% and a bandwidth over 70 GHz.>

DOI
10.1109/77.403261

Related papers

Optical data communication between Josephson-junction circuits and room-temperature electronics

Bart Van Zeghbroeck

The feasibility of optical data transmission to and from Josephson junction circuits, using metal-semiconductor-metal (MSM) photodiodes and GaAs/AlGaAs semiconductor laser diodes with sub-mA threshold current, is demonstrated. Standard devices can be used with the exception of a cooled GaAs detector. It is shown that silicon MSM detectors compatible with Josephson junction circuits can be fabricated. While these detectors show large photoconductive effects at room temperature they behave as good-quality photodiodes at low temperatures. Power dissipation in the laser diode scales with temperature while maintaining the modulation frequency. It is also shown that the combination of a laser diode and a photodiode provides the voltage gain needed to interface Josephson-junction circuits with room-temperature electronics. Experimental results on MSM detectors and laser diodes are presented. Expected power dissipation is below 1 mW per input/output (I/O) at a data rate of 1 Gb/s.>

IEEE Transactions on Applied Superconductivity•Mar 1, 1993•15 citations

Magneto-optical modulator for the superconducting digital output interface

Roberto Rey-de-Castro

Josephson-junction-based low temperature rapid single flux quantum (RSFQ) superconducting electronics is already a mature technology, which is expected to perform at speeds exceeding 100 GHz [1]. However, the RSFQ technology still lacks a fast enough output interface between its operating circuit temperature T = 4.2 K and the room temperature electronic environment. RSFQ circuits work at liquid helium temperatures and the direct interconnection of these circuits and room temperature circuits using, e.g., copper transmission lines would consume too much of the cooling power [2]. To solve this problem a magneto-optical (MO) output interface has been proposed [3], in which the output current pulse from the RSFQ circuit is converted into an optical pulse and delivered to room temperature readout circuitry via an optical fiber.

Opto-Canada: SPIE Regional Meeting on Optoelectronics, Photonics, and Imaging•Aug 29, 2017•1 citation

Ultrafast superconducting optoelectronics

Roman Sobolewski

Ultrafast phenomena, optoelectronics, and superconductivity are acknowledged fields of technological importance and a very large amount of research has been performed in these areas in recent years. In modern, highly-advanced digital electronic circuits, the primary function of high-performance, high-speed signal processing is given to superconducting single-flux-quantum (SFQ) logical devices, based on resistively-shunted Josephson tunnel junctions. The development of this branch of digital electronics requires ultrafast, and ultra sensitive optical-to-electrical transducers for fiber optic interconnects, which must be able to transform to the electrical domain the input information coded in the form of a train of ultrafast optical pulses and, subsequently, feed it into the SFQ processor.

IEEE Lasers and Electro-Optics Society Annual Meeting (LEOS)•Jan 20, 2003•5 citations

Optoelectronic clocking system for testing RSFQ circuits up to 20 GHz

J.F. Buzacchelli, Hae-Seung Lee, Sotiris Alexandrou +2 more

Unlike coaxial cable, optical fiber has a bandwidth commensurate with the clock rates of even the fastest rapid single flux quantum (RSFQ) circuits. Employing this advantage, we have developed an optoelectronic clocking system, in which optical pulses from a picosecond laser are delivered via fiber to a superconducting chip, on which metal-semiconductor-metal (MSM) photodiodes generate fast electrical pulses with subpicosecond timing accuracy. An optical pulse splitter, constructed out of beamsplitters, mirrors, and half-wave plates, permits selection of pulse pattern and clock rate from 80.6 MHz up to 20.6 GHz. With a sampling oscilloscope, we have directly observed optical triggering of an RSFQ T flip-flop at frequencies up to 1.3 GHz with a variety of bit patterns. Optical triggering of a Josephson transmission line (JTL) at frequencies up to 20.6 GHz has been verified by precise measurement of the Josephson voltage; this result represents the highest clock rate ever reported for an optical interface for RSFQ circuits.

IEEE Transactions on Applied Superconductivity•Jun 1, 1997•21 citations

Broadband interfacing of superconducting digital systems to room temperature electronics

D.F. Schneider, J.C. Lin, Stanislav V. Polonsky +2 more

We have developed and tested simple and inexpensive electronics for interfacing Rapid Single-Flux-Quantum (RSFQ) Josephson-junction circuits to room temperature digital systems. Voltage-level (Non-Return-to-Zero) bit signals with a swing of /spl sim/150 uV, developed on-chip by standard SFQ/DC converters, and in some cases amplified to 1.5 mV swing by HUFFLE-type circuits, are passed to the 300 K environment using a high density (40 channel) flexible coplanar waveguide assembly. AC-coupled, 2-3 stage microwave Si-bipolar amps, and Emitter-Coupled-Logic (ECL) buffers accomplish voltage level translation to the standard ECL levels, Using this technique, data rates in excess of 1 Gb/s per channel can be achieved at low cost per channel,.>

IEEE Transactions on Applied Superconductivity•Jun 1, 1995•28 citations

Interfacing Superconductor and Semiconductor Digital Electronics

Yerzhan Mustafa, Selçuk Köse

Interface circuits are the key components that enable the hybrid integration of superconductor and semiconductor digital electronics. The design requirements of superconductor-semiconductor interface circuits vary depending on the application, such as high-performance classical computing, superconducting quantum computing, and digital signal processing. In this survey, various interface circuits are categorized based on the working principle and structure. The superconducting output drivers are explored, which are capable of converting and amplifying, e.g., single flux quantum (SFQ) voltage pulses, to voltage levels that semiconductor circuits can process. Several trade-offs between circuit- and system-level design parameters are examined. Accordingly, parameters such as the data rate, output voltage, power dissipation, layout area, thermal/heat load of cryogenic cables, and bit-error rate are considered.

physics.app-phCross-listedarXiv:2601.09969•Applied Physics Reviews•Jan 16, 2026•3 citations
An ultrafast optical interface between superconducting and room-temperature electronics is proposed to take full advantage of high-speed superconducting circuits. We report on the computed and experimental studies of an optical receiving and modulating system that is compatible in processing with the prevailing integrated-superconducting-circuit technology. Planar interdigitated Nb/Si/Nb metal-semiconductor-metal (MSM) photodiodes are demonstrated as optical receivers with resolvable bit-rate as high as 38 Gb/s, and the response of MSM diode was shaped to be a single-flux-quantum pulse to drive Josephson-junction-based circuits. A similar interdigitated structure on a silicon waveguide is proposed to be an ultrafast light-intensity modulator, with its operation based on carrier-density modulation of the optical index of refraction. This field-effect device has insignificant power dissipation, in addition to high speed. A sample modulator with 5-V bias is shown to have a modulation depth of 40% and a bandwidth over 70 GHz.>
The feasibility of optical data transmission to and from Josephson junction circuits, using metal-semiconductor-metal (MSM) photodiodes and GaAs/AlGaAs semiconductor laser diodes with sub-mA threshold current, is demonstrated. Standard devices can be used with the exception of a cooled GaAs detector. It is shown that silicon MSM detectors compatible with Josephson junction circuits can be fabricated. While these detectors show large photoconductive effects at room temperature they behave as good-quality photodiodes at low temperatures. Power dissipation in the laser diode scales with temperature while maintaining the modulation frequency. It is also shown that the combination of a laser diode and a photodiode provides the voltage gain needed to interface Josephson-junction circuits with room-temperature electronics. Experimental results on MSM detectors and laser diodes are presented. Expected power dissipation is below 1 mW per input/output (I/O) at a data rate of 1 Gb/s.>
Josephson-junction-based low temperature rapid single flux quantum (RSFQ) superconducting electronics is already a mature technology, which is expected to perform at speeds exceeding 100 GHz [1]. However, the RSFQ technology still lacks a fast enough output interface between its operating circuit temperature T = 4.2 K and the room temperature electronic environment. RSFQ circuits work at liquid helium temperatures and the direct interconnection of these circuits and room temperature circuits using, e.g., copper transmission lines would consume too much of the cooling power [2]. To solve this problem a magneto-optical (MO) output interface has been proposed [3], in which the output current pulse from the RSFQ circuit is converted into an optical pulse and delivered to room temperature readout circuitry via an optical fiber.
Ultrafast phenomena, optoelectronics, and superconductivity are acknowledged fields of technological importance and a very large amount of research has been performed in these areas in recent years. In modern, highly-advanced digital electronic circuits, the primary function of high-performance, high-speed signal processing is given to superconducting single-flux-quantum (SFQ) logical devices, based on resistively-shunted Josephson tunnel junctions. The development of this branch of digital electronics requires ultrafast, and ultra sensitive optical-to-electrical transducers for fiber optic interconnects, which must be able to transform to the electrical domain the input information coded in the form of a train of ultrafast optical pulses and, subsequently, feed it into the SFQ processor.
Unlike coaxial cable, optical fiber has a bandwidth commensurate with the clock rates of even the fastest rapid single flux quantum (RSFQ) circuits. Employing this advantage, we have developed an optoelectronic clocking system, in which optical pulses from a picosecond laser are delivered via fiber to a superconducting chip, on which metal-semiconductor-metal (MSM) photodiodes generate fast electrical pulses with subpicosecond timing accuracy. An optical pulse splitter, constructed out of beamsplitters, mirrors, and half-wave plates, permits selection of pulse pattern and clock rate from 80.6 MHz up to 20.6 GHz. With a sampling oscilloscope, we have directly observed optical triggering of an RSFQ T flip-flop at frequencies up to 1.3 GHz with a variety of bit patterns. Optical triggering of a Josephson transmission line (JTL) at frequencies up to 20.6 GHz has been verified by precise measurement of the Josephson voltage; this result represents the highest clock rate ever reported for an optical interface for RSFQ circuits.
We have developed and tested simple and inexpensive electronics for interfacing Rapid Single-Flux-Quantum (RSFQ) Josephson-junction circuits to room temperature digital systems. Voltage-level (Non-Return-to-Zero) bit signals with a swing of /spl sim/150 uV, developed on-chip by standard SFQ/DC converters, and in some cases amplified to 1.5 mV swing by HUFFLE-type circuits, are passed to the 300 K environment using a high density (40 channel) flexible coplanar waveguide assembly. AC-coupled, 2-3 stage microwave Si-bipolar amps, and Emitter-Coupled-Logic (ECL) buffers accomplish voltage level translation to the standard ECL levels, Using this technique, data rates in excess of 1 Gb/s per channel can be achieved at low cost per channel,.>
Interface circuits are the key components that enable the hybrid integration of superconductor and semiconductor digital electronics. The design requirements of superconductor-semiconductor interface circuits vary depending on the application, such as high-performance classical computing, superconducting quantum computing, and digital signal processing. In this survey, various interface circuits are categorized based on the working principle and structure. The superconducting output drivers are explored, which are capable of converting and amplifying, e.g., single flux quantum (SFQ) voltage pulses, to voltage levels that semiconductor circuits can process. Several trade-offs between circuit- and system-level design parameters are examined. Accordingly, parameters such as the data rate, output voltage, power dissipation, layout area, thermal/heat load of cryogenic cables, and bit-error rate are considered.