Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

Broadband interfacing of superconducting digital systems to room temperature electronics

D.F. Schneider, J.C. Lin, Stanislav V. Polonsky, Vasili K. Semenov, C.A. Hamilton

Published Jun 1, 1995• 28 citations
Publisher

Abstract

We have developed and tested simple and inexpensive electronics for interfacing Rapid Single-Flux-Quantum (RSFQ) Josephson-junction circuits to room temperature digital systems. Voltage-level (Non-Return-to-Zero) bit signals with a swing of /spl sim/150 uV, developed on-chip by standard SFQ/DC converters, and in some cases amplified to 1.5 mV swing by HUFFLE-type circuits, are passed to the 300 K environment using a high density (40 channel) flexible coplanar waveguide assembly. AC-coupled, 2-3 stage microwave Si-bipolar amps, and Emitter-Coupled-Logic (ECL) buffers accomplish voltage level translation to the standard ECL levels, Using this technique, data rates in excess of 1 Gb/s per channel can be achieved at low cost per channel,.>

DOI
10.1109/77.403260

Related papers

Josephson output interfaces for RSFQ circuits

Oleg A. Mukhanov, Sergey V. Rylov, Dmitri V. Gaidarenko +2 more

We have developed and demonstrated high bandwidth Josephson circuits to interface the output of RSFQ circuits to room temperature electronics. Asynchronous dc powered voltage driver circuits have been designed to amplify RSFQ signal levels to voltage outputs in the 2-4 mV range, in a wide bandwidth. These driver circuits have been characterized and tested for data rates up to 8 Gb/s. The bit error rate for one of these drivers has been measured up to 7 Gb/s for a (2/sup 31/-1) bit long pseudo-random bit sequence (PRBS). In order to match the data rate of Josephson circuits to slower room temperature electronics, we have developed clock-controlled shift registers which allow shift-in and shift-out of data at different frequencies. Complete functionality of these circuits integrated with the drivers has been demonstrated at low speed. Shift registers integrated with the voltage driver circuits have been tested at high-speed for data rates up to 6 Gb/s.

IEEE Transactions on Applied Superconductivity•Jun 1, 1997•84 citations

Superconductive single-flux quantum technology

Oleg A. Mukhanov

Key digital circuits for signal processing with tens of gigahertz speed and a few microwatts power dissipation have been recently demonstrated using a simple, 2 /spl mu/m linewidth process. These are the fastest digital circuits reported to date. These circuits use novel rapid single flux quantum (RSFQ) technology that takes advantage of the fundamental properties of superconductivity. In this technology, data and clock are picosecond-long quantized voltage pulses corresponding to the transfer of single magnetic flux quanta, /spl Phisub 0/=h/2e=2 mVps. These SFQ pulses are regenerated at each gate and are processed by circuits comprised of overdamped Josephson junctions interconnected via microstrip inductances. The inherent internal memory of all RSFQ gates (primarily flip-flops), combined with high switching speed, makes serial, bit-pipelined circuit design advantageous. This paper presents experiments in RSFQ digital circuits, including an N/spl times/8b serial multiplier, and on-chip test systems based on RSFQ shift registers and on SFQ samplers. They enable test and study of RSFQ circuits at full GHz speed while communicating with semiconductor electronics at low speed.>

Digest of technical papers/Digest of technical papers - IEEE International Solid-State Circuits Conference•Dec 17, 2002•8 citations

Energy Efficient Digital Data Link

Prasana Ravindran, Su-Wei Chang, Wei-Ting Wong +6 more

Efficiently amplifying the high-speed and low-voltage swing outputs of single flux quantum (SFQ) logic to levels that are suitable for interfacing with room temperature electronics has been a long-standing challenge in the field of superconducting electronics. In this work, we investigate the feasibility of using a lossy passive matching network at 4 K, with a pair of differential 100 low-noise amplifiers heatsunk to 18 K and 50 K stages, respectively. The amplifiers were implemented in a 120 nm SiGe BiCMOS technology. The amplification chain is dc coupled and the small-signal link gain was measured to be approximately 48 dB. The power consumption of each of the two amplification stages was 6.3 mW. The chain was measured at 21 K using a high-speed differential nonreturn-to-zero signal having amplitude commensurate with what one would expect from a superconducting circuit, and clean eye diagrams were observed for data rates as high as 30 Gb/s. The chain was also measured when driven from an SFQ/dc interface, with the first gain stage heatsunk to 9 K. In this configuration, clean eye diagrams were observed to 5 Gb/s, with the speed limitation being related to packaging parasitics.

IEEE Transactions on Applied Superconductivity•Dec 7, 2016•7 citations

High-speed demonstration of an output interface driver for single-flux quantum systems

N. Harada, Akira Yoshida, Naoki Yokoyama

The high-speed operation of a one-channel output interface for a single-flux quantum (SFQ) system has been demonstrated. The interface consisted of a Josephson latching driver, a room-temperature semiconductor amplifier, and a decision circuit module. The Josephson latching driver was fabricated by using a 2.5-kA/cm/sup 2/ standard Nb junction process and used to amplify an SFQ pulse into a 5.5-mV level signal at 10 Gb/s. The interface converted the SFQ pulse signal into a nonreturn-to-zero signal having an amplitude of 1 V at 10 Gb/s.

IEEE Transactions on Applied Superconductivity•Sep 1, 2002•9 citations

Asynchronous circuits and systems in superconducting RSFQ digital technology

Z.J. Deng, Nobuyuki Yoshikawa, J. Tierno +2 more

Superconductive Rapid Single Flux Quantum (RSFQ) logic and memory, in which ones and zeros are represented by the presence or absence within a timing window of quantized picosecond voltage pulse (/spl int/v(t)dt=h/2e=2.07 mV/spl middot/ps), corresponding to one SFQ, can be integrated into a digital computing system with an operating rate of several tens of GHz, based on the present Nb Josephson junction integrated circuit technology. It is the most promising technology beyond semiconductor transistors for low-power high-end computation. However, as the operating speed of circuits and systems increase, timing uncertainty from fabrication process variations makes global synchronization very hard. In this paper, we present a globally asynchronous, locally synchronous timing methodology for RSFQ digital design, which can solve the global synchronization problem. We also demonstrate the recent experimental results of some asynchronous circuits and systems implemented in RSFQ technology. Several key components such as a self-timed shift register, a self-timed demultiplexor, a Muller-C element, a completion detector, and a clock generator have been designed and tested. High speed operation has been confirmed up to 20 Gb/s for a prototype data buffer system, which consists two self-timed shift registers and an on-chip 5-38 GHz clock generator.

IEEE International Symposium on Asynchronous Circuits and Systems (ASYNC)•Nov 27, 2002•7 citations

Magneto-optical modulator for the superconducting digital output interface

Roberto Rey-de-Castro

Josephson-junction-based low temperature rapid single flux quantum (RSFQ) superconducting electronics is already a mature technology, which is expected to perform at speeds exceeding 100 GHz [1]. However, the RSFQ technology still lacks a fast enough output interface between its operating circuit temperature T = 4.2 K and the room temperature electronic environment. RSFQ circuits work at liquid helium temperatures and the direct interconnection of these circuits and room temperature circuits using, e.g., copper transmission lines would consume too much of the cooling power [2]. To solve this problem a magneto-optical (MO) output interface has been proposed [3], in which the output current pulse from the RSFQ circuit is converted into an optical pulse and delivered to room temperature readout circuitry via an optical fiber.

Opto-Canada: SPIE Regional Meeting on Optoelectronics, Photonics, and Imaging•Aug 29, 2017•1 citation
We have developed and tested simple and inexpensive electronics for interfacing Rapid Single-Flux-Quantum (RSFQ) Josephson-junction circuits to room temperature digital systems. Voltage-level (Non-Return-to-Zero) bit signals with a swing of /spl sim/150 uV, developed on-chip by standard SFQ/DC converters, and in some cases amplified to 1.5 mV swing by HUFFLE-type circuits, are passed to the 300 K environment using a high density (40 channel) flexible coplanar waveguide assembly. AC-coupled, 2-3 stage microwave Si-bipolar amps, and Emitter-Coupled-Logic (ECL) buffers accomplish voltage level translation to the standard ECL levels, Using this technique, data rates in excess of 1 Gb/s per channel can be achieved at low cost per channel,.>
We have developed and demonstrated high bandwidth Josephson circuits to interface the output of RSFQ circuits to room temperature electronics. Asynchronous dc powered voltage driver circuits have been designed to amplify RSFQ signal levels to voltage outputs in the 2-4 mV range, in a wide bandwidth. These driver circuits have been characterized and tested for data rates up to 8 Gb/s. The bit error rate for one of these drivers has been measured up to 7 Gb/s for a (2/sup 31/-1) bit long pseudo-random bit sequence (PRBS). In order to match the data rate of Josephson circuits to slower room temperature electronics, we have developed clock-controlled shift registers which allow shift-in and shift-out of data at different frequencies. Complete functionality of these circuits integrated with the drivers has been demonstrated at low speed. Shift registers integrated with the voltage driver circuits have been tested at high-speed for data rates up to 6 Gb/s.
Key digital circuits for signal processing with tens of gigahertz speed and a few microwatts power dissipation have been recently demonstrated using a simple, 2 /spl mu/m linewidth process. These are the fastest digital circuits reported to date. These circuits use novel rapid single flux quantum (RSFQ) technology that takes advantage of the fundamental properties of superconductivity. In this technology, data and clock are picosecond-long quantized voltage pulses corresponding to the transfer of single magnetic flux quanta, /spl Phisub 0/=h/2e=2 mVps. These SFQ pulses are regenerated at each gate and are processed by circuits comprised of overdamped Josephson junctions interconnected via microstrip inductances. The inherent internal memory of all RSFQ gates (primarily flip-flops), combined with high switching speed, makes serial, bit-pipelined circuit design advantageous. This paper presents experiments in RSFQ digital circuits, including an N/spl times/8b serial multiplier, and on-chip test systems based on RSFQ shift registers and on SFQ samplers. They enable test and study of RSFQ circuits at full GHz speed while communicating with semiconductor electronics at low speed.>
Efficiently amplifying the high-speed and low-voltage swing outputs of single flux quantum (SFQ) logic to levels that are suitable for interfacing with room temperature electronics has been a long-standing challenge in the field of superconducting electronics. In this work, we investigate the feasibility of using a lossy passive matching network at 4 K, with a pair of differential 100 low-noise amplifiers heatsunk to 18 K and 50 K stages, respectively. The amplifiers were implemented in a 120 nm SiGe BiCMOS technology. The amplification chain is dc coupled and the small-signal link gain was measured to be approximately 48 dB. The power consumption of each of the two amplification stages was 6.3 mW. The chain was measured at 21 K using a high-speed differential nonreturn-to-zero signal having amplitude commensurate with what one would expect from a superconducting circuit, and clean eye diagrams were observed for data rates as high as 30 Gb/s. The chain was also measured when driven from an SFQ/dc interface, with the first gain stage heatsunk to 9 K. In this configuration, clean eye diagrams were observed to 5 Gb/s, with the speed limitation being related to packaging parasitics.
The high-speed operation of a one-channel output interface for a single-flux quantum (SFQ) system has been demonstrated. The interface consisted of a Josephson latching driver, a room-temperature semiconductor amplifier, and a decision circuit module. The Josephson latching driver was fabricated by using a 2.5-kA/cm/sup 2/ standard Nb junction process and used to amplify an SFQ pulse into a 5.5-mV level signal at 10 Gb/s. The interface converted the SFQ pulse signal into a nonreturn-to-zero signal having an amplitude of 1 V at 10 Gb/s.
Superconductive Rapid Single Flux Quantum (RSFQ) logic and memory, in which ones and zeros are represented by the presence or absence within a timing window of quantized picosecond voltage pulse (/spl int/v(t)dt=h/2e=2.07 mV/spl middot/ps), corresponding to one SFQ, can be integrated into a digital computing system with an operating rate of several tens of GHz, based on the present Nb Josephson junction integrated circuit technology. It is the most promising technology beyond semiconductor transistors for low-power high-end computation. However, as the operating speed of circuits and systems increase, timing uncertainty from fabrication process variations makes global synchronization very hard. In this paper, we present a globally asynchronous, locally synchronous timing methodology for RSFQ digital design, which can solve the global synchronization problem. We also demonstrate the recent experimental results of some asynchronous circuits and systems implemented in RSFQ technology. Several key components such as a self-timed shift register, a self-timed demultiplexor, a Muller-C element, a completion detector, and a clock generator have been designed and tested. High speed operation has been confirmed up to 20 Gb/s for a prototype data buffer system, which consists two self-timed shift registers and an on-chip 5-38 GHz clock generator.
Josephson-junction-based low temperature rapid single flux quantum (RSFQ) superconducting electronics is already a mature technology, which is expected to perform at speeds exceeding 100 GHz [1]. However, the RSFQ technology still lacks a fast enough output interface between its operating circuit temperature T = 4.2 K and the room temperature electronic environment. RSFQ circuits work at liquid helium temperatures and the direct interconnection of these circuits and room temperature circuits using, e.g., copper transmission lines would consume too much of the cooling power [2]. To solve this problem a magneto-optical (MO) output interface has been proposed [3], in which the output current pulse from the RSFQ circuit is converted into an optical pulse and delivered to room temperature readout circuitry via an optical fiber.