Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

Simulation of conversion gain and reflectivity coefficients in heterodyne detector using a superconductor-normal metal-superconductor junction

A. M. Luiz, Yuri A. Gorelov, R. Nicolsky

Published Jun 1, 1999• 2 citations
Publisher

Abstract

We design a millimeter-wave heterodyne receiver using Superconductor-Normal metal-Superconductor (SNS) junction. We simulate its Current-Voltage Characteristics (CVC) as a function of its relevant physical parameters. Performing computer simulations, we use the negative derivative range of its CVC to calculate the conversion gain and reflectivity coefficients of the proposed device. These parameters show that it should be possible to increase the sensitivity of the SNS mixer and a reflection parametric amplifier may be feasible.

DOI
10.1109/77.784012

Related papers

Heterodyne detector using a SNS junction

A. M. Luiz, L.A.A. Pereira, R. Nicolsky

We propose new designs for millimeter-wave heterodyne detectors using the negative differential resistance of SNS junctions. The SNS junction may be used as the local oscillator in conventional receivers or a single SNS junction may be simultaneously used as the local oscillator and as the mixer itself, taking advantage of the nonlinearity of the current-voltage characteristic (CVC) of the junction. We calculate CVC curves for high-Tc SNS junctions (YBCO-SNS junctions), which are expressed as a function of T/Tc and other parameters.

IEEE Transactions on Applied Superconductivity•Jun 1, 1997•8 citations

Superconductor-normal metal-superconductor junctions for signal amplification and harmonic multiplication

V. Soares, A. M. Luiz, R. Nicolsky

We report signal amplification and harmonic multiplication processes based on the nonlinear current-voltage characteristics (CVC) displayed by superconductor-normal metal-superconductor (SNS) junctions. Such junctions may exhibit a negative differential resistance at low voltages, the so called low-voltage-negative-differential-resistance (LVNDR) effect. This effect is due to the quantum mechanical multiple Andreev reflection mechanism in very clean systems and is stable against a bias voltage. Therefore, it is in principle possible to use these junctions as an active element in a variety of circuit applications such as oscillators, amplifiers or mixers, in the microwave and millimeter-wave range.

IEEE Transactions on Magnetics•Jan 1, 1999•3 citations

Predicted conversion gain in superconductor-insulator-superconductor quasiparticle mixers

John R. Tucker

A computer simulation is constructed to describe the performance of superconductor-insulator-superconductor (SIS) quasiparticle heterodyne receivers in terms of photon-assisted tunneling theory. The results predict that conversion efficiencies greater than unity can be realized at millimeter wave frequencies, with noise temperatures approaching the fundamental quantum limit. The nonlinearity responsible for the mixing is the extremely rapid onset of quasiparticle tunneling current in SIS junctions near the full gap voltage 2Δ/e, and is independent of the Josephson pair currents. Substantial gain is expected under a variety of conditions and for a wide range of source and load impedances.

Applied Physics Letters•Mar 15, 1980•107 citations

Low-Noise Superconducting Mixers for the Terahertz Frequency Range

Victor Y. Belitsky, Serguei Cherednichenko, Dag Winkler

This chapter discusses the high sensitivity superconducting mixers, i.e. detectors used in heterodyne receivers. Today, there are essentially two very successful concepts of superconducting mixers, or frequency down-converters, the superconductor-insulator-superconductor tunnel junction SIS mixer and the superconducting hot-electron bolometer mixer. Moving up to higher frequencies in the microwave and millimeter wave electromagnetic spectra makes it more and more difficult to retrieve a good signal-to-noise ratio with ordinary solid-state amplifiers. The driving force for using superconducting mixers is their excellent down-conversion efficiency and capability to down-convert RF signals from microwave frequencies up to the terahertz region. The main purpose of a receiver is to pick up and amplify a weak signal, which can then be accurately determined in amplitude and phase. The mixer noise temperature and conversion gain are the most important parameters for the mixing device. The Josephson junction mixer was one of the first suggested devices based on superconducting point contacts and later tunnel junctions.

CRC Press eBooks•May 17, 2022•1 citation

Study on Frequency Up-Conversion Characteristic in SIS Mixers and its Application

雄人 上月

Superconductor-insulator-superconductor (SIS) junctions, which are low-noise heterodyne mixers, have been used as frequency converters.In recent years, ultralow power consumption of receiver components has become essential to increase the scale and integration of receiver systems.In this paper, we explore the performance of SIS mixers, which have been widely used as a low-noise frequency down-converter in the field of radio astronomy, as a frequency up-converter and discuss the possibility of its application to low-noise microwave amplifiers with ultra-low power consumption.In this study, we investigate the characteristics of the SIS upconverters, clarifying the conditions for gain generation in up-conversion.This research will lead to the realization of ultra-low-power amplifiers based on SIS mixers, which will solve the problem of increasing power consumption in future receiver systems.Chapter 1 describes the background of the research, including the ongoing problem of the increasing scale of receiving systems and the associated power consumption of low-noise amplifiers in the field of high-sensitivity reception, the history of the research on heterodyne mixing using SIS mixers, and the significance and policy of the research.Chapter 2 describes the theoretical background relevant to this study and discusses the basic properties of SIS junctions as heterodyne mixers.In Chapter 3, we describe the numerical analysis conducted to clarify the upconversion characteristics of the SIS mixer.In Chapter 4, we describe the mixing characteristics of SIS junctions at 40 GHz by constructing a new experimental system that directly measures the characteristics of heterodyne mixers. IVIn Chapter 5, a new experimental system is constructed using an existing SIS mixer developed as a down-converter for W-band, and the up-conversion gain characteristics in the 100 GHz band are described.Chapter 6 describes a demonstration experiment that shows the potential of the SIS mixer to be applied to ultra-low-power low-noise microwave amplifiers.Chapter 7 summarizes the paper and discusses the challenges and prospects for future realization and application of ultra-low-power amplifiers.V

•Mar 24, 2022•0 citations

Noise of superconductor/normal metal/superconductor mixer based on low voltage negative differential resistance effect

Yuri A. Gorelov, R. Nicolsky

The conversion efficiency was calculated for some type of high-T/sub c/ superconducting junctions, which have negative derivative on current-voltage characteristics. This distinguishing feature can be explained by Andreev reflections in superconductor/normal metal boundaries. In this work it is analyzed a combination of the theoretical predictions of noise, based on noise correlation matrix of the mixer model, and theory of Likharev-Semenov for the thermal noise. The conversion gain is possible in SNS mixers in spite of noise in negative derivative region.

IEEE Transactions on Applied Superconductivity•Jun 1, 1999•2 citations
We design a millimeter-wave heterodyne receiver using Superconductor-Normal metal-Superconductor (SNS) junction. We simulate its Current-Voltage Characteristics (CVC) as a function of its relevant physical parameters. Performing computer simulations, we use the negative derivative range of its CVC to calculate the conversion gain and reflectivity coefficients of the proposed device. These parameters show that it should be possible to increase the sensitivity of the SNS mixer and a reflection parametric amplifier may be feasible.
We propose new designs for millimeter-wave heterodyne detectors using the negative differential resistance of SNS junctions. The SNS junction may be used as the local oscillator in conventional receivers or a single SNS junction may be simultaneously used as the local oscillator and as the mixer itself, taking advantage of the nonlinearity of the current-voltage characteristic (CVC) of the junction. We calculate CVC curves for high-Tc SNS junctions (YBCO-SNS junctions), which are expressed as a function of T/Tc and other parameters.
We report signal amplification and harmonic multiplication processes based on the nonlinear current-voltage characteristics (CVC) displayed by superconductor-normal metal-superconductor (SNS) junctions. Such junctions may exhibit a negative differential resistance at low voltages, the so called low-voltage-negative-differential-resistance (LVNDR) effect. This effect is due to the quantum mechanical multiple Andreev reflection mechanism in very clean systems and is stable against a bias voltage. Therefore, it is in principle possible to use these junctions as an active element in a variety of circuit applications such as oscillators, amplifiers or mixers, in the microwave and millimeter-wave range.
A computer simulation is constructed to describe the performance of superconductor-insulator-superconductor (SIS) quasiparticle heterodyne receivers in terms of photon-assisted tunneling theory. The results predict that conversion efficiencies greater than unity can be realized at millimeter wave frequencies, with noise temperatures approaching the fundamental quantum limit. The nonlinearity responsible for the mixing is the extremely rapid onset of quasiparticle tunneling current in SIS junctions near the full gap voltage 2Δ/e, and is independent of the Josephson pair currents. Substantial gain is expected under a variety of conditions and for a wide range of source and load impedances.
This chapter discusses the high sensitivity superconducting mixers, i.e. detectors used in heterodyne receivers. Today, there are essentially two very successful concepts of superconducting mixers, or frequency down-converters, the superconductor-insulator-superconductor tunnel junction SIS mixer and the superconducting hot-electron bolometer mixer. Moving up to higher frequencies in the microwave and millimeter wave electromagnetic spectra makes it more and more difficult to retrieve a good signal-to-noise ratio with ordinary solid-state amplifiers. The driving force for using superconducting mixers is their excellent down-conversion efficiency and capability to down-convert RF signals from microwave frequencies up to the terahertz region. The main purpose of a receiver is to pick up and amplify a weak signal, which can then be accurately determined in amplitude and phase. The mixer noise temperature and conversion gain are the most important parameters for the mixing device. The Josephson junction mixer was one of the first suggested devices based on superconducting point contacts and later tunnel junctions.
Superconductor-insulator-superconductor (SIS) junctions, which are low-noise heterodyne mixers, have been used as frequency converters.In recent years, ultralow power consumption of receiver components has become essential to increase the scale and integration of receiver systems.In this paper, we explore the performance of SIS mixers, which have been widely used as a low-noise frequency down-converter in the field of radio astronomy, as a frequency up-converter and discuss the possibility of its application to low-noise microwave amplifiers with ultra-low power consumption.In this study, we investigate the characteristics of the SIS upconverters, clarifying the conditions for gain generation in up-conversion.This research will lead to the realization of ultra-low-power amplifiers based on SIS mixers, which will solve the problem of increasing power consumption in future receiver systems.Chapter 1 describes the background of the research, including the ongoing problem of the increasing scale of receiving systems and the associated power consumption of low-noise amplifiers in the field of high-sensitivity reception, the history of the research on heterodyne mixing using SIS mixers, and the significance and policy of the research.Chapter 2 describes the theoretical background relevant to this study and discusses the basic properties of SIS junctions as heterodyne mixers.In Chapter 3, we describe the numerical analysis conducted to clarify the upconversion characteristics of the SIS mixer.In Chapter 4, we describe the mixing characteristics of SIS junctions at 40 GHz by constructing a new experimental system that directly measures the characteristics of heterodyne mixers. IVIn Chapter 5, a new experimental system is constructed using an existing SIS mixer developed as a down-converter for W-band, and the up-conversion gain characteristics in the 100 GHz band are described.Chapter 6 describes a demonstration experiment that shows the potential of the SIS mixer to be applied to ultra-low-power low-noise microwave amplifiers.Chapter 7 summarizes the paper and discusses the challenges and prospects for future realization and application of ultra-low-power amplifiers.V
The conversion efficiency was calculated for some type of high-T/sub c/ superconducting junctions, which have negative derivative on current-voltage characteristics. This distinguishing feature can be explained by Andreev reflections in superconductor/normal metal boundaries. In this work it is analyzed a combination of the theoretical predictions of noise, based on noise correlation matrix of the mixer model, and theory of Likharev-Semenov for the thermal noise. The conversion gain is possible in SNS mixers in spite of noise in negative derivative region.