Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Conference on Precision Electromagnetic Measurements

Quantum waveform synthesizer using Nb/TiN/Nb binary-divided Josephson junction arrays

Jonathan M. J. Williams, Dale Henderson, Takahiro Yamada

Published Jul 1, 2012• 1 citation
Publisher

Abstract

This paper describes the development of a quantum waveform synthesizer operating at a sampling frequency of 100 kHz with the aim of generating sine waves directly traceable to the Josesphson quantum voltage standard. The quantum reference is based on arrays of 65 536 Josephson junctions, fabricated using Nb/TiN/Nb technology and operating at a bias frequency of 16 GHz corresponding to an output voltage of approximately 2.2 V. The synthesizer contains a specially constructed difference amplifier, digital source and anti-imaging filter. The type A uncertainty is estimated to be 40 nV for a 1s observation time.

DOI
10.1109/cpem.2012.6251110

Related papers

One-Volt Josephson Arbitrary Waveform Synthesizer

Samuel P. Benz, Steven B. Waltman, Anna E. Fox +6 more

A quantum-accurate waveform with an rms output amplitude of 1 V has been synthesized for the first time. This fourfold increase in voltage over previous systems was achieved through developments and improvements in bias electronics, pulse-bias techniques, Josephson junction array circuit fabrication, and packaging. A recently described ac-coupled bipolar pulse-bias technique was used to bias a superconducting integrated circuit with 25 600 junctions, which are equally divided into four series-connected arrays, into the second quantum state. We describe these advancements and present the measured 1 V spectra for 2 Hz and 10 Hz sine waves that remained quantized over a 0.4 mA current range. We also demonstrate a 2 kHz sine wave produced with another bias technique that requires no compensation current and remains quantized at an rms voltage of 128 mV over a 1 mA current range. Increasing the clock frequency to 19 GHz also allowed us to achieve a maximum rms output voltage for a single array of 330 mV.

IEEE Transactions on Applied Superconductivity•Sep 17, 2014•59 citations

RF Waveform Synthesizers With Quantum-Based Voltage Accuracy for Communications Metrology

P. F. Hopkins, Justus A. Brevik, Manuel A. Castellanos-Beltran +6 more

We review our development of Josephson-junction-based programmable reference sources to synthesize spectrally pure waveforms with quantum-based voltage accuracy for characterizing and improving future communication devices and systems. The goal is to provide sources that together span the entire radio frequency band, equivalent to seven orders of magnitude in frequency (20 kHz to 300 GHz). To synthesize waveforms in the microwave frequency band, we are extending the existing Josephson arbitrary waveform synthesizer (JAWS) technology used for ac voltage metrology at audio frequencies (<;20 kHz). Using new microwave circuits and experimental techniques, we demonstrate JAWS-based synthesis of single-tone waveforms at 1 GHz, with -49 dBm output power and 79 dBc spur-free dynamic range (SFDR). To synthesize waveforms in the millimeter-wave frequency band, we are exploiting single flux quantum (SFQ) superconducting digital technology to design circuits that amplify SFQ pulses using a network of pulse splitters. With our initial SFQ-based circuit, we demonstrate synthesis of a 4-GHz sine wave with -74 dBm output power and 70 dBc SFDR.

IEEE Transactions on Applied Superconductivity•Mar 8, 2019•23 citations

Analog-to-digital conversion for low-frequency waveforms based on the Josephson voltage standard

Mun-Seog Kim, Kyu‐Tae Kim, Wan-Seop Kim +2 more

A waveform synthesizer adopting a superconductor–normal metal–superconductor junction array has been developed, which can generate arbitrary stepwise waveforms with a number of quantum-voltage steps up to 1 V level amplitude. As an application of the synthesizer, we have built a sampling voltmeter that measures the differential voltages between a sinusoidal waveform produced by a semiconductor-based ac source and the Josephson waveforms. We carried out extensive sampling measurements for a 50 Hz sine wave with 1 V amplitude, applying sampling apertures in the range of 55 µs ⩽ t a ⩽ 130 µs and using Josephson waveforms with 32, 60, 80 and 100 quantum steps. From the measurements, the amplitude of the ac waveform was determined with a type A uncertainty ( k = 2) of 0.15 µV. Also, we elucidated how the phase jitter in the ac waveform is reflected in the overall uncertainty for the measurements. The type B uncertainty due to the jitter is at least one order of magnitude smaller than the type A uncertainty.

Measurement Science and Technology•Sep 24, 2010•39 citations

Investigation of binary Josephson arrays for arbitrary waveform synthesis

Peter Kleinschmidt, P. Patel, Jonathan M. J. Williams +1 more

Arrays of Josephson junctions have been used successfully for many years as the primary standard of voltage. A recent development has been the fabrication of arrays, based on non-hysteretic Josephson junctions, which allows the voltage output to be changed almost instantaneously. When these arrays are divided into binary segments a ‘digital-to-analogue converter’ with quantum accuracy is created. The properties of two types of array, a SINIS array, using intrinsic shunting of the Josephson junctions, and a SIS array with external, on-chip shunting have been investigated. The accuracy of the generated voltages and AC properties of the arrays when driven with a purpose-built, programmable current bias source are discussed. It is anticipated that a Josephson standard having waveforms with calculable rms values of AC voltage will soon be available.

IEE Proceedings - Science Measurement and Technology•Nov 4, 2002•33 citations

Precision Measurements Using a 300 mV Josephson Arbitrary Waveform Synthesizer

Samuel P. Benz, Paul D. Dresselhaus, Charles J. Burroughs +1 more

We have developed a Josephson digital-to-analog converter, otherwise know as a Josephson arbitrary waveform synthesizer, with 300 mV peak output voltage. This is the first system of its kind with demonstrated quantum accuracy. We show precision synthesized waveforms from dc to 100 kHz with measured distortion and harmonic content below 115 dBc (dB below the carrier or fundamental). The heart of the system is a superconducting microwave integrated circuit with two Josephson junction arrays biased in parallel for the microwave drive and connected in series to double the voltage for the audio frequency output waveforms. New superconducting integrated circuits with twice as many stacked junctions and improved microwave circuits have allowed us to more than double the output voltage of our recent system. We also demonstrate that quantum-based synthesized arbitrary waveforms (not just sine waves) can be used for precision measurements of a high-performance commercial analog-to-digital converter.

IEEE Transactions on Applied Superconductivity•Jun 1, 2007•52 citations

Josephson-based quantum voltage standards – an ongoing success story

Ralf Behr, Stephan Bauer, Marco Kraus +2 more

The past few decades have witnessed great progress being made from the first voltage standards based on arrays of Josephson junctions. Continuous improvements in the fabrication process have increased the quality and “user-friendliness” of these superconducting circuits. Combined with the improvements in measuring electronics, the range of applications of Josephson-based measurements with unmatched precision has extended from DC into AC voltage metrology for signal frequencies up to 500 kHz. In this poster we will present several Josephson-based measurement systems developed for metrology applications. Two versions of quantum AC standards will be used as Josephson references: Programmable Josephson Voltage Standards (PJVS), which are based on serial arrays with up to 300,000 Josephson junctions, and pulse-driven arrays with more than 50,000 junctions, typically referred to as Josephson Arbitrary Waveform Synthesizers (JAWS). PJVS can reach amplitudes of up to 80 V, while pulse-driven arrays can reach up to 1 V or even 4 V. The advantage of pulse-driven Josephson voltage standards is that they are ideally suited as quantum-based voltage synthesizers for arbitrary waveforms or sine waves with high spectral purity. Therefore, they can be used directly to characterize or calibrate ADCs. In addition, JAWS are particularly useful in Josephson impedance bridges, which perform automated impedance calibrations at the 10-9 uncertainty level over a wide frequency range from 50 Hz to 80 kHz in a single bridge. We will further show how PJVS are used in commercial quantum voltmeters for DC and AC voltages and are typically used as quantum voltage references in measurement systems. Using differential sampling based on PJVS, uncertainties at the level of a few parts in 108 for frequencies up to the kHz range can be achieved. Such quantum-based AC voltage calibrations are at least 30 times faster than conventional AC-DC transfer and offer even better uncertainties. This idea has been quickly adopted by many National Metrology Institutes to establish such systems for AC voltage calibrations. As an example, the BIPM will now start worldwide onsite comparisons to ensure the uniformity of the new method which we introduced in 2006. But developments continue. Recently, a sub-sampling technique was used to extend the frequency range of the AC quantum voltmeter to up to 100 kHz with uncertainties below 5 parts in 106. In addition, a novel method, also for differential sampling, enables the measurement of arbitrary waveforms and the calibration of specific tones. Our poster will provide an overview of these Josephson-based metrological applications and present the latest developments from this fast-developing area.

•Jan 1, 2025•0 citations
This paper describes the development of a quantum waveform synthesizer operating at a sampling frequency of 100 kHz with the aim of generating sine waves directly traceable to the Josesphson quantum voltage standard. The quantum reference is based on arrays of 65 536 Josephson junctions, fabricated using Nb/TiN/Nb technology and operating at a bias frequency of 16 GHz corresponding to an output voltage of approximately 2.2 V. The synthesizer contains a specially constructed difference amplifier, digital source and anti-imaging filter. The type A uncertainty is estimated to be 40 nV for a 1s observation time.
A quantum-accurate waveform with an rms output amplitude of 1 V has been synthesized for the first time. This fourfold increase in voltage over previous systems was achieved through developments and improvements in bias electronics, pulse-bias techniques, Josephson junction array circuit fabrication, and packaging. A recently described ac-coupled bipolar pulse-bias technique was used to bias a superconducting integrated circuit with 25 600 junctions, which are equally divided into four series-connected arrays, into the second quantum state. We describe these advancements and present the measured 1 V spectra for 2 Hz and 10 Hz sine waves that remained quantized over a 0.4 mA current range. We also demonstrate a 2 kHz sine wave produced with another bias technique that requires no compensation current and remains quantized at an rms voltage of 128 mV over a 1 mA current range. Increasing the clock frequency to 19 GHz also allowed us to achieve a maximum rms output voltage for a single array of 330 mV.
We review our development of Josephson-junction-based programmable reference sources to synthesize spectrally pure waveforms with quantum-based voltage accuracy for characterizing and improving future communication devices and systems. The goal is to provide sources that together span the entire radio frequency band, equivalent to seven orders of magnitude in frequency (20 kHz to 300 GHz). To synthesize waveforms in the microwave frequency band, we are extending the existing Josephson arbitrary waveform synthesizer (JAWS) technology used for ac voltage metrology at audio frequencies (<;20 kHz). Using new microwave circuits and experimental techniques, we demonstrate JAWS-based synthesis of single-tone waveforms at 1 GHz, with -49 dBm output power and 79 dBc spur-free dynamic range (SFDR). To synthesize waveforms in the millimeter-wave frequency band, we are exploiting single flux quantum (SFQ) superconducting digital technology to design circuits that amplify SFQ pulses using a network of pulse splitters. With our initial SFQ-based circuit, we demonstrate synthesis of a 4-GHz sine wave with -74 dBm output power and 70 dBc SFDR.
A waveform synthesizer adopting a superconductor–normal metal–superconductor junction array has been developed, which can generate arbitrary stepwise waveforms with a number of quantum-voltage steps up to 1 V level amplitude. As an application of the synthesizer, we have built a sampling voltmeter that measures the differential voltages between a sinusoidal waveform produced by a semiconductor-based ac source and the Josephson waveforms. We carried out extensive sampling measurements for a 50 Hz sine wave with 1 V amplitude, applying sampling apertures in the range of 55 µs ⩽ t a ⩽ 130 µs and using Josephson waveforms with 32, 60, 80 and 100 quantum steps. From the measurements, the amplitude of the ac waveform was determined with a type A uncertainty ( k = 2) of 0.15 µV. Also, we elucidated how the phase jitter in the ac waveform is reflected in the overall uncertainty for the measurements. The type B uncertainty due to the jitter is at least one order of magnitude smaller than the type A uncertainty.
Arrays of Josephson junctions have been used successfully for many years as the primary standard of voltage. A recent development has been the fabrication of arrays, based on non-hysteretic Josephson junctions, which allows the voltage output to be changed almost instantaneously. When these arrays are divided into binary segments a ‘digital-to-analogue converter’ with quantum accuracy is created. The properties of two types of array, a SINIS array, using intrinsic shunting of the Josephson junctions, and a SIS array with external, on-chip shunting have been investigated. The accuracy of the generated voltages and AC properties of the arrays when driven with a purpose-built, programmable current bias source are discussed. It is anticipated that a Josephson standard having waveforms with calculable rms values of AC voltage will soon be available.
We have developed a Josephson digital-to-analog converter, otherwise know as a Josephson arbitrary waveform synthesizer, with 300 mV peak output voltage. This is the first system of its kind with demonstrated quantum accuracy. We show precision synthesized waveforms from dc to 100 kHz with measured distortion and harmonic content below 115 dBc (dB below the carrier or fundamental). The heart of the system is a superconducting microwave integrated circuit with two Josephson junction arrays biased in parallel for the microwave drive and connected in series to double the voltage for the audio frequency output waveforms. New superconducting integrated circuits with twice as many stacked junctions and improved microwave circuits have allowed us to more than double the output voltage of our recent system. We also demonstrate that quantum-based synthesized arbitrary waveforms (not just sine waves) can be used for precision measurements of a high-performance commercial analog-to-digital converter.
The past few decades have witnessed great progress being made from the first voltage standards based on arrays of Josephson junctions. Continuous improvements in the fabrication process have increased the quality and “user-friendliness” of these superconducting circuits. Combined with the improvements in measuring electronics, the range of applications of Josephson-based measurements with unmatched precision has extended from DC into AC voltage metrology for signal frequencies up to 500 kHz. In this poster we will present several Josephson-based measurement systems developed for metrology applications. Two versions of quantum AC standards will be used as Josephson references: Programmable Josephson Voltage Standards (PJVS), which are based on serial arrays with up to 300,000 Josephson junctions, and pulse-driven arrays with more than 50,000 junctions, typically referred to as Josephson Arbitrary Waveform Synthesizers (JAWS). PJVS can reach amplitudes of up to 80 V, while pulse-driven arrays can reach up to 1 V or even 4 V. The advantage of pulse-driven Josephson voltage standards is that they are ideally suited as quantum-based voltage synthesizers for arbitrary waveforms or sine waves with high spectral purity. Therefore, they can be used directly to characterize or calibrate ADCs. In addition, JAWS are particularly useful in Josephson impedance bridges, which perform automated impedance calibrations at the 10-9 uncertainty level over a wide frequency range from 50 Hz to 80 kHz in a single bridge. We will further show how PJVS are used in commercial quantum voltmeters for DC and AC voltages and are typically used as quantum voltage references in measurement systems. Using differential sampling based on PJVS, uncertainties at the level of a few parts in 108 for frequencies up to the kHz range can be achieved. Such quantum-based AC voltage calibrations are at least 30 times faster than conventional AC-DC transfer and offer even better uncertainties. This idea has been quickly adopted by many National Metrology Institutes to establish such systems for AC voltage calibrations. As an example, the BIPM will now start worldwide onsite comparisons to ensure the uniformity of the new method which we introduced in 2006. But developments continue. Recently, a sub-sampling technique was used to extend the frequency range of the AC quantum voltmeter to up to 100 kHz with uncertainties below 5 parts in 106. In addition, a novel method, also for differential sampling, enables the measurement of arbitrary waveforms and the calibration of specific tones. Our poster will provide an overview of these Josephson-based metrological applications and present the latest developments from this fast-developing area.