Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Journal of Applied Physics

Microwave effects on YBa2Cu3Oy Josephson junctions with step-edge, bi-epitaxial, and sandwich geometries

H. C. Yang, Jiangang Lu, Sheng-Pang Lin, L. C. Ku, Hsiao-Mei Cho, Wen‐Bin Jian, Ming-Yau Chern, H. E. Horng, J. M. Wu, Jyi‐Tsong Lo, C. C. Chiou

Published Aug 1, 1995• 2 citations
Publisher

Abstract

Fabrication and characterization of YBa2Cu3Oy Josephson junctions with step-edge, bi-epitaxial, and sandwich geometries are performed in this study to investigate the effects of microwave irradiation on the I–V characteristics. I–V curves under microwave irradiation reveal Shapiro steps. The width of the constant voltage steps were modulated by the microwave power. The period of the magnetic induction ΔB detected from the V–Φ curves for superconducting quantum interference devices is temperature dependent. Additionally, Tc and Ic of the proximity sandwich junctions are enhanced by the microwave irradiation.

DOI
10.1063/1.360222

Related papers

Physics of High-T, Josephson Junctions and SQUIDs

H. C. Yang, Jiazhen Lu, J. D. Lee +3 more

Effects of magnetic fields and microwave radiation on I-V characteristics of YBa2Cu3Oy high-T, Josephson junctions, SQUIDS and Josephson arrays were reported in this experiment, with special emphasis focused on the effects of microwave radiation. In addition to the ordinary constant-voltage steps resulting from the ac Josephson effect, noninteger constant voltage steps are occasionally observed under microwave radiation. We attribute these noninteger constant-voltage steps to the flux coupled to junctions or SQUIDS. Resistive SQUIDS disclose V-Φmodulation without a biased current. The peak to peak value AV of a V-Φ curve is enhanced by microwave radiation.

Chinese Journal of Physics•Apr 1, 1996•0 citations

Simulation of effect of microwave irradiation on I-V characteristics of Josephson junction using RCLSJ model with noise into consideration

Mohammed Shahabuddin

I-V characteristics of Josephson junction (JJ) under microwave irradiation is simulated taking the resistance, capacitance and inductance of the junction (RCLSJ) into account. Since most of the JJ made with high TC material operates at high temperature where the thermal fluctuation is playing significant role. In the present simulation, thermal noise is also taken into consideration and simulated result explains the rounding behaviour of the Shapiro step observed in the experimental I-V curve. The simulated results also confirm the growing of Shapiro steps with increasing microwave power. This model also clearly account for the appearance of broad minima and reduction of the maxima in the power dependence of the step amplitude ΔIn/2Ic as observed in the experimental data of Kautz et al. (1992).

International Journal of Nano and Biomaterials•Jan 1, 2009•0 citations

BSCCO intrinsic Josephson junctions for microwave detection

Takashi Tachiki, Takashi Uchida, Yoshizumi Yasuoka

Microwave-induced steps were observed in I-V characteristics of intrinsic Josephson junctions fabricated on an overdoped BSCCO single crystal with a weak magnetic field parallel to the c-axis. Voltage intervals between the steps under the irradiation of 12.2, 13.2 and 13.9 GHz microwaves were independent of the microwave power and proportional to the frequency. From the measurement of voltage intervals, it was found that all the junctions in the fabricated junction stack simultaneously produced Shapiro steps, assuming that the steps are Shapiro steps.

IEEE Transactions on Applied Superconductivity•Jun 1, 2003•5 citations

Microwave response of long intrinsic Josephson junctions fabricated on Bi-2212 single crystals

Takashi Tachiki, Takashi Uchida

The microwave response properties of Bi 2 Sr 2 CaCu 2 O 8+x long intrinsic Josephson junctions have been experimentally and theoretically investigated. We fabricated a mesa structure consisting of 14 junctions, 50 μm long and 4 μm wide, and observed the microwave-induced steps in the I-V characteristics under irradiation with microwaves in the range 5–8 GHz. The step voltages were proportional to the square root of the microwave power, implying that the steps were produced by the motion of fluxons created by the microwaves. The Josephson frequency corresponding to the maximum step voltage was estimated to be 570 GHz. The step voltage decreased with increasing temperature, which can be explained by the decrease of the Swihart velocity. We performed a numerical simulation using coupled sine-Gordon equations and obtained a power dependence of the step voltage similar to the experimental result, and demonstrated standing waves of electric fields with in-phase plasma oscillation in all the junctions. These facts suggest that the steps observed in the experiment were produced by plasma resonance excited by the external microwaves.

Journal of Physics Conference Series•Feb 1, 2008•1 citation

Planar SNS Josephson junctions using multilayer Bi system

Kentaro Setsune, Koichi Mizuno, Hidetaka Higashino +1 more

Planar S/N/S Josephson junctions were successfully fabricated by multi-layered thin films of Bi-based high-Tc oxide superconductors. Two Bi2Sr2Ca1Cu2O(x) films and Bi2Sr2Cu1O(y) film were successively layered as superconducting electrodes and normal conducting buffer layer, respectively. These films were epitaxially deposited on (100) MgO substrate by in situ process of RF magnetron sputtering. Microjunction areas were defined by photolithography and Ar ion milling. These S/N/S type junctions clearly exhibited the AC Josephson effect under the irradiation of radio frequency waves of 12 GHz. More than 20th Shapiro steps were observed and those step heights were oscillated according to the irradiation power. These characteristics were stable and reproducible for different configuration of function area.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Mar 1, 1991•1 citation

Quantum Voltage Characteristics of High-Temperature Superconducting Josephson Junction Arrays with Varied Junction Widths

Da Xu, Yafang Lian, Changhao Zhao +3 more

High-temperature superconducting (HTS) Josephson junction (JJ) arrays with varied junction widths of 2-5 μm were fabricated on REBCO/Au-coated (La,Sr)(Al,Ta)O3 (LSAT) bicrystal substrates for quantum voltage standard applications. The HTS JJ arrays, consisting of five Josephson junctions connected in series, were irradiated via a Fabry-Pérot resonator. The HTS JJ series array with a 5 μm junction width exhibits the best overall performance. Under 66.72 GHz microwave irradiation at 77 K, the 5 μm-wide junction array exhibits a second-order quantum voltage of 1.3794 mV with a step width of 250 μA and voltage fluctuation of within 0.1 μV. At a lower temperature of 58.66 K and 69.516 GHz microwave irradiation, the same device produced a stable quantum voltage of 8.0494 mV, corresponding to the 11th to 12th order steps, with a step width of 100 μA and voltage fluctuation also confined to 0.1 μV.

Conference on Precision Electromagnetic Measurements•Sep 1, 2026•0 citations
Fabrication and characterization of YBa2Cu3Oy Josephson junctions with step-edge, bi-epitaxial, and sandwich geometries are performed in this study to investigate the effects of microwave irradiation on the I–V characteristics. I–V curves under microwave irradiation reveal Shapiro steps. The width of the constant voltage steps were modulated by the microwave power. The period of the magnetic induction ΔB detected from the V–Φ curves for superconducting quantum interference devices is temperature dependent. Additionally, Tc and Ic of the proximity sandwich junctions are enhanced by the microwave irradiation.
Effects of magnetic fields and microwave radiation on I-V characteristics of YBa2Cu3Oy high-T, Josephson junctions, SQUIDS and Josephson arrays were reported in this experiment, with special emphasis focused on the effects of microwave radiation. In addition to the ordinary constant-voltage steps resulting from the ac Josephson effect, noninteger constant voltage steps are occasionally observed under microwave radiation. We attribute these noninteger constant-voltage steps to the flux coupled to junctions or SQUIDS. Resistive SQUIDS disclose V-Φmodulation without a biased current. The peak to peak value AV of a V-Φ curve is enhanced by microwave radiation.
I-V characteristics of Josephson junction (JJ) under microwave irradiation is simulated taking the resistance, capacitance and inductance of the junction (RCLSJ) into account. Since most of the JJ made with high TC material operates at high temperature where the thermal fluctuation is playing significant role. In the present simulation, thermal noise is also taken into consideration and simulated result explains the rounding behaviour of the Shapiro step observed in the experimental I-V curve. The simulated results also confirm the growing of Shapiro steps with increasing microwave power. This model also clearly account for the appearance of broad minima and reduction of the maxima in the power dependence of the step amplitude ΔIn/2Ic as observed in the experimental data of Kautz et al. (1992).
Microwave-induced steps were observed in I-V characteristics of intrinsic Josephson junctions fabricated on an overdoped BSCCO single crystal with a weak magnetic field parallel to the c-axis. Voltage intervals between the steps under the irradiation of 12.2, 13.2 and 13.9 GHz microwaves were independent of the microwave power and proportional to the frequency. From the measurement of voltage intervals, it was found that all the junctions in the fabricated junction stack simultaneously produced Shapiro steps, assuming that the steps are Shapiro steps.
The microwave response properties of Bi 2 Sr 2 CaCu 2 O 8+x long intrinsic Josephson junctions have been experimentally and theoretically investigated. We fabricated a mesa structure consisting of 14 junctions, 50 μm long and 4 μm wide, and observed the microwave-induced steps in the I-V characteristics under irradiation with microwaves in the range 5–8 GHz. The step voltages were proportional to the square root of the microwave power, implying that the steps were produced by the motion of fluxons created by the microwaves. The Josephson frequency corresponding to the maximum step voltage was estimated to be 570 GHz. The step voltage decreased with increasing temperature, which can be explained by the decrease of the Swihart velocity. We performed a numerical simulation using coupled sine-Gordon equations and obtained a power dependence of the step voltage similar to the experimental result, and demonstrated standing waves of electric fields with in-phase plasma oscillation in all the junctions. These facts suggest that the steps observed in the experiment were produced by plasma resonance excited by the external microwaves.
Planar S/N/S Josephson junctions were successfully fabricated by multi-layered thin films of Bi-based high-Tc oxide superconductors. Two Bi2Sr2Ca1Cu2O(x) films and Bi2Sr2Cu1O(y) film were successively layered as superconducting electrodes and normal conducting buffer layer, respectively. These films were epitaxially deposited on (100) MgO substrate by in situ process of RF magnetron sputtering. Microjunction areas were defined by photolithography and Ar ion milling. These S/N/S type junctions clearly exhibited the AC Josephson effect under the irradiation of radio frequency waves of 12 GHz. More than 20th Shapiro steps were observed and those step heights were oscillated according to the irradiation power. These characteristics were stable and reproducible for different configuration of function area.
High-temperature superconducting (HTS) Josephson junction (JJ) arrays with varied junction widths of 2-5 μm were fabricated on REBCO/Au-coated (La,Sr)(Al,Ta)O3 (LSAT) bicrystal substrates for quantum voltage standard applications. The HTS JJ arrays, consisting of five Josephson junctions connected in series, were irradiated via a Fabry-Pérot resonator. The HTS JJ series array with a 5 μm junction width exhibits the best overall performance. Under 66.72 GHz microwave irradiation at 77 K, the 5 μm-wide junction array exhibits a second-order quantum voltage of 1.3794 mV with a step width of 250 μA and voltage fluctuation of within 0.1 μV. At a lower temperature of 58.66 K and 69.516 GHz microwave irradiation, the same device produced a stable quantum voltage of 8.0494 mV, corresponding to the 11th to 12th order steps, with a step width of 100 μA and voltage fluctuation also confined to 0.1 μV.