Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Applied Optics

Temperature-insensitive laser frequency stabilization with magnetic tuning

Lucas J. Willis, M. J. Lim

Published Apr 24, 2008• 5 citations
Publisher

Abstract

We have implemented a tunable laser frequency lock with a wide recapture range and low sensitivity to temperature fluctuation, based on electronically power-normalized Doppler-broadened absorption spectra. The method requires no frequency modulation. A distributed-feedback diode laser locked to this system exhibits submegahertz stability over many hours. It has been used to magneto-optically trap rubidium atoms for a full day.

DOI
10.1364/ao.47.002312

Related papers

Frequency-stabilized diode laser with the Zeeman shift in an atomic vapor

Kristan L. Corwin, Zheng‐Tian Lu, Carter F. Hand +2 more

We demonstrate a robust method of stabilizing a diode laser frequency to an atomic transition. This technique employs the Zeeman shift to generate an antisymmetric signal about a Doppler-broadened atomic resonance, and therefore offers a large recapture range as well as high stability. The frequency of a 780-nm diode laser, stabilized to such a signal in Rb, drifted less than 0.5 MHz peak-peak (1 part in 10(9)) in 38 h. This tunable frequency lock can be constructed inexpensively, requires little laser power, rarely loses lock, and can be extended to other wavelengths by use of different atomic species.

Applied Optics•May 20, 1998•381 citations

Laser frequency stabilization for atom cooling and magnetic-field compression of the trap

S. Chakrabarti, Ayan Ray, A. Bandyopadhyay +5 more

We report a frequency stabilization technique of a diode laser in a Doppler-free atomic transition used for obtaining the magneto-optical trapping of Rb atoms. This technique, based on side locking to an atomic transition using a servo controller, is very simple and can be implemented straightforwardly to lock the laser at the red detuned frequency position required for laser cooling experiments. The number of trapped atoms and the temperature of the cold cloud have been determined. The effect of trapping the magnetic field on the cloud radius has also been analyzed.

Laser Physics•Sep 1, 2007•1 citation

Optical frequency standard by using a 1560 nm diode laser locked to saturated absorption lines of rubidium vapor

Shin Masuda, Atsushi Seki, Shoji Niki

A robust, compact, highly accurate rubidium optical frequency standard module was developed to overcome the delicate performance of conventional frequency stabilized lasers. A frequency doubled 1560 nm distributed feedback diode laser locked to a rubidium D(2) saturated absorption line without using an optical amplifier was demonstrated, and dithering-free optical output was obtained. In addition, the sensitivity of the developed optical frequency standard to magnetic fields was investigated. We confirmed that the influence of the magnetic fields on the optical frequency standard can be almost negligible when using appropriate magnetic-shield films. As a result, the magnetic-field-insensitive optical frequency standard, which can be embedded in optical systems, exhibiting uncertainty less than at least 100 kHz, was successfully realized for the first time to the best of our knowledge.

Applied Optics•Jul 3, 2007•18 citations

A home-built lock-in amplifier for laser frequency stabilization

K Sowka, M. Weel, S. Cauchi +2 more

We describe an inexpensive lock-in amplifier that can be built using discrete off-the-shelf RF components and home-built analog circuits. This lock-in has been used in a feedback loop to lock the frequency of a laser to an atomic transition. The frequency stability was tested by trapping rubidium atoms. The feedback loop involves obtaining a modulated saturated absorption signal from a vapor cell using an acousto-optic modulator to modulate the laser frequency. The absorption signal is sent to the lock-in to generate an error signal, proportional to the first derivative of the absorption, which is fed back to the laser to complete the feedback loop. We also demonstrate a simplified optical setup for viewing the saturated absorption spectrum. In this case, the signal consists of narrow saturated absorption spectra riding on top of a Doppler-broadened pedestal. We show that it is possible to greatly reduce the effect of this background and lock the laser to the atomic resonance by modifying the home-built lock-in to generate an error signal proportional to the third derivative of the absorption. The results of this work can be adapted for advanced undergraduate laboratory work.PACS Nos.: 01.50Pa, 07.50.–e, 42.62Fi, 42.60Fc

Canadian Journal of Physics•Sep 1, 2005•14 citations

Tunable and frequency-stabilized diode laser using temperature-dependent energy pooling fluorescence

Liantuan Xiao, Tao Huang, Lirong Wang +2 more

We have demonstrated a robust method of tuning and stabilizing a diode laser frequency to the fluorescence peaks of the energy pooling occurred at thermal cesium vapor-glass interface. This technique is based on temperature-dependent shift of the two off-core fluorescence peaks caused by 6P3∕2+6P3∕2→7P(3∕2,1∕2)∕8S1∕2+6S1∕2 energy pooling collisions. We achieved laser linewidth of 1.1MHz and continuous tunability over ±200–600MHz within a temperature range of 360–420K by applying the wavelength modulation technology. Tunable frequency locking in such a wide range was constructed inexpensively with low laser power. It can also be extended to other wavelengths by using different atomic species.

Applied Physics Letters•Jun 5, 2006•2 citations

Frequency stabilization of lasers by locking to an atomic isoclinic point

N. P. Wells, James C. Camparo

To overcome the temperature sensitivity of lasers locked to Doppler-broadened transitions, we propose a scheme in which the laser is locked to an isoclinic point of the atom's spectrum: a frequency at which the first derivative of the absorption spectrum does not change upon a physical change of the sample. Here, we demonstrate that an isoclinic point exists in the Rb87D1spectrum at 795 nm, and that it is located midway between the Fg=2 → Fe=1 and Fg=2 → Fe=2 transitions. Locking a VCSEL diode laser to this isoclinic point, we have been able to demonstrate a very low sensitivity of the locked laser's frequency to temperature variations of the atomic vapor.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)•Jun 1, 2010•1 citation
We have implemented a tunable laser frequency lock with a wide recapture range and low sensitivity to temperature fluctuation, based on electronically power-normalized Doppler-broadened absorption spectra. The method requires no frequency modulation. A distributed-feedback diode laser locked to this system exhibits submegahertz stability over many hours. It has been used to magneto-optically trap rubidium atoms for a full day.
We demonstrate a robust method of stabilizing a diode laser frequency to an atomic transition. This technique employs the Zeeman shift to generate an antisymmetric signal about a Doppler-broadened atomic resonance, and therefore offers a large recapture range as well as high stability. The frequency of a 780-nm diode laser, stabilized to such a signal in Rb, drifted less than 0.5 MHz peak-peak (1 part in 10(9)) in 38 h. This tunable frequency lock can be constructed inexpensively, requires little laser power, rarely loses lock, and can be extended to other wavelengths by use of different atomic species.
We report a frequency stabilization technique of a diode laser in a Doppler-free atomic transition used for obtaining the magneto-optical trapping of Rb atoms. This technique, based on side locking to an atomic transition using a servo controller, is very simple and can be implemented straightforwardly to lock the laser at the red detuned frequency position required for laser cooling experiments. The number of trapped atoms and the temperature of the cold cloud have been determined. The effect of trapping the magnetic field on the cloud radius has also been analyzed.
A robust, compact, highly accurate rubidium optical frequency standard module was developed to overcome the delicate performance of conventional frequency stabilized lasers. A frequency doubled 1560 nm distributed feedback diode laser locked to a rubidium D(2) saturated absorption line without using an optical amplifier was demonstrated, and dithering-free optical output was obtained. In addition, the sensitivity of the developed optical frequency standard to magnetic fields was investigated. We confirmed that the influence of the magnetic fields on the optical frequency standard can be almost negligible when using appropriate magnetic-shield films. As a result, the magnetic-field-insensitive optical frequency standard, which can be embedded in optical systems, exhibiting uncertainty less than at least 100 kHz, was successfully realized for the first time to the best of our knowledge.
We describe an inexpensive lock-in amplifier that can be built using discrete off-the-shelf RF components and home-built analog circuits. This lock-in has been used in a feedback loop to lock the frequency of a laser to an atomic transition. The frequency stability was tested by trapping rubidium atoms. The feedback loop involves obtaining a modulated saturated absorption signal from a vapor cell using an acousto-optic modulator to modulate the laser frequency. The absorption signal is sent to the lock-in to generate an error signal, proportional to the first derivative of the absorption, which is fed back to the laser to complete the feedback loop. We also demonstrate a simplified optical setup for viewing the saturated absorption spectrum. In this case, the signal consists of narrow saturated absorption spectra riding on top of a Doppler-broadened pedestal. We show that it is possible to greatly reduce the effect of this background and lock the laser to the atomic resonance by modifying the home-built lock-in to generate an error signal proportional to the third derivative of the absorption. The results of this work can be adapted for advanced undergraduate laboratory work.PACS Nos.: 01.50Pa, 07.50.–e, 42.62Fi, 42.60Fc
We have demonstrated a robust method of tuning and stabilizing a diode laser frequency to the fluorescence peaks of the energy pooling occurred at thermal cesium vapor-glass interface. This technique is based on temperature-dependent shift of the two off-core fluorescence peaks caused by 6P3∕2+6P3∕2→7P(3∕2,1∕2)∕8S1∕2+6S1∕2 energy pooling collisions. We achieved laser linewidth of 1.1MHz and continuous tunability over ±200–600MHz within a temperature range of 360–420K by applying the wavelength modulation technology. Tunable frequency locking in such a wide range was constructed inexpensively with low laser power. It can also be extended to other wavelengths by using different atomic species.
To overcome the temperature sensitivity of lasers locked to Doppler-broadened transitions, we propose a scheme in which the laser is locked to an isoclinic point of the atom's spectrum: a frequency at which the first derivative of the absorption spectrum does not change upon a physical change of the sample. Here, we demonstrate that an isoclinic point exists in the Rb87D1spectrum at 795 nm, and that it is located midway between the Fg=2 → Fe=1 and Fg=2 → Fe=2 transitions. Locking a VCSEL diode laser to this isoclinic point, we have been able to demonstrate a very low sensitivity of the locked laser's frequency to temperature variations of the atomic vapor.