Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Physica C Superconductivity

High-speed measurement method of quantized energy levels in Josephson junctions using SFQ circuits

Yuki Yamanashi, M. Ito, A. Tagami, Nobuyuki Yoshikawa

Published Jul 8, 2004• 4 citations
Publisher
DOI
10.1016/j.physc.2003.12.090

Related papers

Observation of an Energy Levels Quantization in a Josephson Junction using SFQ circuits

Yuki Yamanashi, Tagami Akiyuki, Yoshikawa Nobuyuki

IEICE Technical Report; IEICE Tech. Rep.•Jul 8, 2004•0 citations

Observation of Quantized Energy Levels in a Josephson Junction Using SFQ Circuits

Yuki Yamanashi, M. Ito, A. Tagami +1 more

A single flux quantum (SFQ) circuit to measure quantized energy levels in a Josephson junction has been proposed and implemented, which allows us to perform high-speed and low-noise measurements of the escape rate in Josephson junctions. By using this technique, the measurement of escape rate has been carried out at 4.2 K, the temperature three times higher than the crossover temperature. The test results show periodic dependence of the escape rate on the junction bias current, which is caused by the energy quantization effect in the Josephson junction.

IEEE Transactions on Applied Superconductivity•Jun 1, 2005•5 citations

Energy levels quantization in Josephson junctions

P. Silvestrini, B. Ruggiero, C. Granata +2 more

Applied Superconductivity•Jul 1, 1998•1 citation

300 GHz Operation of Divider Circuits using High-Jc Nb/NbxSi1-x/Nb Josephson Junctions

David I. Olaya, Paul D. Dresselhaus, Samuel P. Benz

We investigated high-current-density Josephson junctions with NbxSi1-xbarriers in single-flux-quantum (SFQ) digital circuits to evaluate their performance at clock frequencies of hundreds of gigahertz. We fabricated static divider SFQ circuits with a-NbxSi1-xand a-Si barriers for Jcranging from 3.5 to 85 kA/cm2. For junctions in the lower Jcrange (3.5-17 kA/cm2), we used optical lithography, and for the 85-kA/cm2junctions, we used electron-beam lithography. We measured SFQ circuits with a maximum operating speed of 300 GHz by use of intrinsically shunted junctions having submicrometer dimensions and an 85-kA/cm2critical current density. These results demonstrate that silicide-barrier junctions have the potential to achieve high-speed SFQ circuits and high-density circuits because the junctions are small and do not require external shunt resistors.

IEEE Transactions on Applied Superconductivity•Jan 1, 2014•8 citations

A model of quantum measurement in Josephson junctions

Roger A. Hegstrom, Fernando Sols

Foundations of Physics•May 1, 1995•5 citations

Characterization of HTS SFQ circuits using interface-engineered Josephson junctions

K. Saitoh, Yoshihisa Soutome, Tokuumi Fukazawa +2 more

We fabricated and tested high-temperature superconducting (HTS) rapid-single-flux-quantum (RSFQ) circuits using interface-engineered Josephson junction (IEJ). The characteristics of high-speed operation were examined by voltage-divider operation based on the toggle-flip-flop circuit. An operation at 155 GHz was obtained at 15 K and the proper functioning of the voltage divider was observed up to 27 K. Temperature dependence of the maximum operation speed was analyzed by circuit simulation with thermal-noise sources. To achieve higher speed operation using a Josephson junction with a higher I/sub c/R/sub n/ product, we also fabricated an RSFQ balanced comparator using IEJ; proper switching characteristics of the circuit was confirmed up to 190 GHz at 30 K. The bias condition dependencies were studied based on the circuit simulations in the relationship of the I/sub c/R/sub n/ product. The results of circuit simulation indicate that a Josephson junction with an I/sub c/R/sub n/ product of more than 0.7 mV is required for high-speed operation (100 GHz) in high-temperature range (30-40 K). We believe that the IEJ is a promising junction candidate for realizing high-speed operation in a high-temperature range.

IEEE Transactions on Applied Superconductivity•Mar 1, 2001•17 citations
A single flux quantum (SFQ) circuit to measure quantized energy levels in a Josephson junction has been proposed and implemented, which allows us to perform high-speed and low-noise measurements of the escape rate in Josephson junctions. By using this technique, the measurement of escape rate has been carried out at 4.2 K, the temperature three times higher than the crossover temperature. The test results show periodic dependence of the escape rate on the junction bias current, which is caused by the energy quantization effect in the Josephson junction.
We investigated high-current-density Josephson junctions with NbxSi1-xbarriers in single-flux-quantum (SFQ) digital circuits to evaluate their performance at clock frequencies of hundreds of gigahertz. We fabricated static divider SFQ circuits with a-NbxSi1-xand a-Si barriers for Jcranging from 3.5 to 85 kA/cm2. For junctions in the lower Jcrange (3.5-17 kA/cm2), we used optical lithography, and for the 85-kA/cm2junctions, we used electron-beam lithography. We measured SFQ circuits with a maximum operating speed of 300 GHz by use of intrinsically shunted junctions having submicrometer dimensions and an 85-kA/cm2critical current density. These results demonstrate that silicide-barrier junctions have the potential to achieve high-speed SFQ circuits and high-density circuits because the junctions are small and do not require external shunt resistors.
We fabricated and tested high-temperature superconducting (HTS) rapid-single-flux-quantum (RSFQ) circuits using interface-engineered Josephson junction (IEJ). The characteristics of high-speed operation were examined by voltage-divider operation based on the toggle-flip-flop circuit. An operation at 155 GHz was obtained at 15 K and the proper functioning of the voltage divider was observed up to 27 K. Temperature dependence of the maximum operation speed was analyzed by circuit simulation with thermal-noise sources. To achieve higher speed operation using a Josephson junction with a higher I/sub c/R/sub n/ product, we also fabricated an RSFQ balanced comparator using IEJ; proper switching characteristics of the circuit was confirmed up to 190 GHz at 30 K. The bias condition dependencies were studied based on the circuit simulations in the relationship of the I/sub c/R/sub n/ product. The results of circuit simulation indicate that a Josephson junction with an I/sub c/R/sub n/ product of more than 0.7 mV is required for high-speed operation (100 GHz) in high-temperature range (30-40 K). We believe that the IEJ is a promising junction candidate for realizing high-speed operation in a high-temperature range.