Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Journal of Optics B Quantum and Semiclassical Optics

A tunable doughnut laser beam for cold-atom experiments

S. M. Iftiquar

Published Dec 9, 2002• 8 citations
Publisher

Abstract

A doughnut-shaped light beam has been generated from a Gaussian mode (TEM 00 ). Upon splitting the pump beam into two equal-intensity components and introducing unequal convergences with a phase delay while they are recombined, a doughnut mode results. The output beam is tunable and has a long propagation length. The evanescent field generated by a 360 mW (at 780 nm wavelength) beam creates an optical field of 600 nm decay length with a 5.75 neV repulsive dipole potential. Thus cold Rb atoms (at a temperature of 10 μK or less) released from a magneto-optical trap can be reflected by the funnel surface, with the result that the atoms are ultimately collected at the bottom.

DOI
10.1088/1464-4266/5/1/305

Related papers

Mode conversion in optical beam in order to create funnel shaped optical near field to collect cold Rb atoms from MOT

S. M. Iftiquar

Doughnut shaped light beam has been generated from Gaussian mode ($TEM_{00}$) cw-Ti sapphire laser. After splitting the pump beam into two equal intensity components and introducing unequal convergence and phase delay while they are recombined it results in doughnut mode. Such a beam is tunable and have long propagation length. The evanescent field generated by 360 mW (at 780 nm wavelength) of such a beam creates optical field of 600 nm decay length with a 5.75 neV repulsive dipole potential. Thus cold Rb atoms (at 10{$μ$}K or less temperature) released from MOT can be reflected by the surface so that the atoms are collected ultimately at the bottom of the prism. By focussing such doughnut beam with 8 cm focal length converging lens, the dark radius reduces to 22{$μ$}. We also observe such beam to contain azimuthal phase as well as radial phase distribution.

arXiv:physics/0306021•Jun 3, 2003•1 citation

Tunable doughnut light beam for a near-field optical funnel of atoms

S. M. Iftiquar, Hajime Ito, Motoichi Ohtsu

A doughnut-shaped Laguerre-Gaussian (LG) beam has been generated through interference of two spherical waves. The beam has a 5 mm bright ring and a 250-microns dark center suitable for our atom funnel experiment. The power conversion efficiency from a Gaussian mode to the LG mode is about 50%.

Conference on Lasers and Electro-Optics Pacific Rim (CLEO-PR)•Nov 13, 2002•2 citations

Atomic funnel with evanescent light

Hajime Ito, K. Sakaki, Wonho Jhe +1 more

We propose an atomic funnel composed of an evanescent-light mirror produced in a conical hollow prism. The funneling of cold Rb atoms released from a magneto-optical trap is simulated in the scheme of the evanescent-light-induced Sisyphus cooling for compensating the heating by gravity. A geometric method of the conversion of a Gaussian light beam into a doughnut-shaped light beam suitable for the atomic funnel is also experimentally demonstrated by means of a double-cone prism. Under the assumption of a proper optical intensity distribution over the inner surface of a specific conical hollow prism, the Monte Carlo simulation including the van der Waals interaction shows that a half of the released Rb atoms can be collected and the mean temperature of the collected atoms is low enough for the application to be guided with a bent hollow optical fiber.

Physical Review A•Jul 1, 1997•76 citations

Atom guiding and cooling by a dark hollow laser beam

Kwanil Lee, Xinye Xu, Seunghyup Yoo +2 more

Atom guiding in an atomic funnel is very useful for many interesting atom optical experiments requiring the precise control of atomic motion. We have obtained a doughnut-shaped laser beam by coupling a Ti:sapphire laser into a hollow core optical fiber and collimating the output laser beam of the fiber with a microscope objective lens. Using such a doughnut-shaped laser beam [2 mm inner diameter and a 5 mm outer diameter at the trapping position (about 1m away from the objective lens)l, we have guided the trapped cold Rb atoms in the atomic funnel.

Conference on Lasers and Electro-Optics Pacific Rim (CLEO-PR)•Jan 20, 2003•1 citation

Excitation Of A Funnel-Shape Optical Near Field By The Laguarre-Gaussian Doughnut Beam

S. M. Iftiquar, Haruhiko Ito, Akifumi Takamizawa +1 more

Optical near field has been generated by Laguarre-Gaussian doughnut beam on inner surface of "atom funnel". The resulting optical near field has been measured with the help of fiber probe and a consequent effect on cold atoms- released from MOT, has been estimated. Atoms with temperature less than 10 micro_kelvin can be reflected by the optical near field.

arXiv:physics/0305124•May 29, 2003•0 citations

Joint Symposium on Nonlinear Optical Materials

S. Friebel, Rainer A. Deutschmann, G. Wokurka +3 more

QTuE5 Fig. 3 Map of a potential barrier for metastable argon atoms produced by a doughnut beam of 500 mW. The blue-detuning A is taken to be 15 times the natural linewidth r. The slope angle and exit hole of the he1 prism are assumed to be 60 and 0.2 mm, respectively. The Y axis shows the distance from the inner wall, while the Z axis indicates the distance along the fall line from the center of the exit hole. most 100% conversion rate. A Gaussian beam branches into two paths in the first refraction on the prism, and then a non- divergent doughnut beam appears after the second refraction. Figure 2b shows the intensity profile of the doughnut beam formed through the doublesone prism with a length of 4.25 mm and a diameter of 2.5 mm. The hollow diameter and ring thickness of the doughnut beams are determined by the prism length and the waist of the input Gauss- ian beam, respectively. The funnel can be available for reflec- tion of cold atoms fallen from a MOT. Figure 3 shows the potential barrier for metastable argon atoms expressed in terms of temperature, assuming the fun- nel prism with an exit hole of 0.2 mm and a slope of 60. The doughnut beam con- verted from the Gausian beam with a waist of 1.6 mm and a power of 500 mW produces the potential barrier of more than 1 mK through a distance of 3 mm along the fall line. Unless the funnel in- cludes some cooling mechanisms to com- pensate acceleration resulting from grav- itation, the atoms with the velocity of more than 10 cm/s cannot escape from the exit hole. Recently the addition of a weak pumping beam to cool atoms down to the recoil limit has been reported: The use of the additional beam propagating downward makes up for the lack of cool- ing mechanisms. Progress of the atom- guidance experiment will be also pre-

•Jan 1, 1995•0 citations
A doughnut-shaped light beam has been generated from a Gaussian mode (TEM 00 ). Upon splitting the pump beam into two equal-intensity components and introducing unequal convergences with a phase delay while they are recombined, a doughnut mode results. The output beam is tunable and has a long propagation length. The evanescent field generated by a 360 mW (at 780 nm wavelength) beam creates an optical field of 600 nm decay length with a 5.75 neV repulsive dipole potential. Thus cold Rb atoms (at a temperature of 10 μK or less) released from a magneto-optical trap can be reflected by the funnel surface, with the result that the atoms are ultimately collected at the bottom.
Doughnut shaped light beam has been generated from Gaussian mode (TEM00TEM_{00}TEM00​) cw-Ti sapphire laser. After splitting the pump beam into two equal intensity components and introducing unequal convergence and phase delay while they are recombined it results in doughnut mode. Such a beam is tunable and have long propagation length. The evanescent field generated by 360 mW (at 780 nm wavelength) of such a beam creates optical field of 600 nm decay length with a 5.75 neV repulsive dipole potential. Thus cold Rb atoms (at 10{μμμ}K or less temperature) released from MOT can be reflected by the surface so that the atoms are collected ultimately at the bottom of the prism. By focussing such doughnut beam with 8 cm focal length converging lens, the dark radius reduces to 22{μμμ}. We also observe such beam to contain azimuthal phase as well as radial phase distribution.
We propose an atomic funnel composed of an evanescent-light mirror produced in a conical hollow prism. The funneling of cold Rb atoms released from a magneto-optical trap is simulated in the scheme of the evanescent-light-induced Sisyphus cooling for compensating the heating by gravity. A geometric method of the conversion of a Gaussian light beam into a doughnut-shaped light beam suitable for the atomic funnel is also experimentally demonstrated by means of a double-cone prism. Under the assumption of a proper optical intensity distribution over the inner surface of a specific conical hollow prism, the Monte Carlo simulation including the van der Waals interaction shows that a half of the released Rb atoms can be collected and the mean temperature of the collected atoms is low enough for the application to be guided with a bent hollow optical fiber.
Atom guiding in an atomic funnel is very useful for many interesting atom optical experiments requiring the precise control of atomic motion. We have obtained a doughnut-shaped laser beam by coupling a Ti:sapphire laser into a hollow core optical fiber and collimating the output laser beam of the fiber with a microscope objective lens. Using such a doughnut-shaped laser beam [2 mm inner diameter and a 5 mm outer diameter at the trapping position (about 1m away from the objective lens)l, we have guided the trapped cold Rb atoms in the atomic funnel.
QTuE5 Fig. 3 Map of a potential barrier for metastable argon atoms produced by a doughnut beam of 500 mW. The blue-detuning A is taken to be 15 times the natural linewidth r. The slope angle and exit hole of the he1 prism are assumed to be 60 and 0.2 mm, respectively. The Y axis shows the distance from the inner wall, while the Z axis indicates the distance along the fall line from the center of the exit hole. most 100% conversion rate. A Gaussian beam branches into two paths in the first refraction on the prism, and then a non- divergent doughnut beam appears after the second refraction. Figure 2b shows the intensity profile of the doughnut beam formed through the doublesone prism with a length of 4.25 mm and a diameter of 2.5 mm. The hollow diameter and ring thickness of the doughnut beams are determined by the prism length and the waist of the input Gauss- ian beam, respectively. The funnel can be available for reflec- tion of cold atoms fallen from a MOT. Figure 3 shows the potential barrier for metastable argon atoms expressed in terms of temperature, assuming the fun- nel prism with an exit hole of 0.2 mm and a slope of 60. The doughnut beam con- verted from the Gausian beam with a waist of 1.6 mm and a power of 500 mW produces the potential barrier of more than 1 mK through a distance of 3 mm along the fall line. Unless the funnel in- cludes some cooling mechanisms to com- pensate acceleration resulting from grav- itation, the atoms with the velocity of more than 10 cm/s cannot escape from the exit hole. Recently the addition of a weak pumping beam to cool atoms down to the recoil limit has been reported: The use of the additional beam propagating downward makes up for the lack of cool- ing mechanisms. Progress of the atom- guidance experiment will be also pre-