Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Japanese Journal of Applied Physics

Effects of Kinetic Inductance on the Performance of a Flux-Flow-Type Josephson Amplifier

Tatsunori Hashimoto, Keiji Enpuku, Keiji Yoshida, Kaoru Yamafuji

Published Nov 1, 1987• 4 citations
Publisher

Abstract

The effects of the kinetic inductance of superconducting thin electrodes on the basic parameters of a flux-flow-type Josephson amplifier (FFA) are studied theoretically. It is shown that performance of the FFA can be improved considerably if the kinetic inductance is utilized. A preliminary experiment confirms the theoretical result.
DOI
10.1143/jjap.26.l1874

Related papers

Performances of a flux-flow-type Josephson amplifier

T. Hashimoto, Keiji Enpuku, Keiji Yoshida

The authors have been developing an analog amplifier utilizing a flux flow phenomena in a Josephson line, i.e. the flux-flow-type Josephson amplifier (FFA). The FFA converts a signal current I/sub s/ to a voltage V/sub dc/ across the Josephson line, and the I/sub s/-V/sub dc/ characteristic determines the performance of the FFA, e.g. the gain and saturation level. Studies have been made to improve the I/sub s/-V/sub dc/ relation. It is shown that the transresistance can be improved significantly by reducing the width of the Josephson line and increasing the kinetic inductance of the line. The kinetic inductance can be increased by thinning the line electrode and by using an electrode with large London penetration depth, such as NbN. The transresistance obtained is as large as 6.8 Omega for NbN/Pb-alloy Josephson lines with a thickness of 5 nm and a width of 4 mu m. It is also shown that the linear operating range of the amplifier is as large as 1 mV.>

IEEE Transactions on Magnetics•Mar 1, 1989•9 citations

Inductive coupling of a flux-flow type Josephson oscillator to a stripline

Keiji Yoshida, J. Qin, Keiji Enpuku

A theoretical and experimental study of the coupling of the flux-flow-type Josephson oscillator (FFO) to an external stripline has been carried out to overcome the large impedance mismatch between them. For efficient coupling and impedance matching at millimeter and submillimeter wavelengths, the authors have proposed a scheme where the Josephson oscillator is inductively coupled to the stripline by a thin superconducting electrode. Theoretical modeling of the coupling section and the design of the stripline impedance-transformer have been carried out. In a preliminary experiment, the authors obtained a power of about 10/sup -7/ W emitted from the FFO into the stripline in the frequency range from 184 GHz to 193 GHz.>

IEEE Transactions on Magnetics•Mar 1, 1989•11 citations

Design and performance of flux-flow type Josephson oscillator coupled to a stripline

Keiji Yoshida, Keisuke Kudo, Keiji Enpuku

In order to realize efficient coupling between a flux-flow type Josephson oscillator (FFO) and an external stripline, the authors carried out experiments to investigate the inductive coupling scheme in a strong coupling regime. By adopting NbN films with large penetration depths as electrodes for strong coupling, they were able to realize coupling sections with a coupling coefficient alpha =M/ square root L/sub 1/L/sub 2/ as large as 0.7, with M, L/sub 1/, and L/sub 2/ being mutual inductance, self-inductances of, the FFO, and the stripline, respectively. Using this design for the coupling, the authors succeeded in detecting AC fields at frequencies around 150 GHz, which were emitted from FFO to the stripline via the coupling section.

IEEE Transactions on Magnetics•Mar 1, 1991•4 citations

Flux-flow-type Josephson oscillator for millimeter and submillimeter wave region. IV. Thin-film coupling

Jiaqian Qin, Keiji Enpuku, Keiji Yoshida

Power emission from a flux-flow-type Josephson oscillator with a thin-film coupling method is studied experimentally. The thickness of one electrode of the oscillator is made thin enough to allow electromagnetic fields generated by the oscillator to be emitted through the thin-film electrode. Radiation power from the oscillator is detected with superconductor-insulator-superconductor detectors, which are fabricated on top of the oscillator. Experimental results show that sufficient power can be obtained from the oscillator by using the thin-film coupling method when the thickness of the electrode is comparable to the London penetration depth. The results obtained are in reasonable agreement with theoretical predictions. The thin-film coupling method will be useful when the oscillator is connected to external circuits, such as an impedance matching circuit.

Journal of Applied Physics•Feb 15, 1988•69 citations

Josephson tunneling logic gates with thin electrodes

M. Klein

Thin electrode flux penetration effects in Josephson tunneling gates are analyzed and experimental results exhibiting these effects are reported for the first time. Deep flux penetration accompanied by deep current penetration contribute added inductance not coupled to the external field, reducing sensitivity to control current. In addition, the field within the lower electrode reduces the end-to-end asymmetry introduced by the superconducting ground plane and makes the threshold characteristic more symmetrical. The thin film effects are embodied in an equivalent circuit. Experimental results for devices with thick and thin films are compared showing the expected increased symmetry and reduced sensitivity for the thin film case. Experimental results agree well with calculations based on the equivalent circuit.

IEEE Transactions on Magnetics•Jan 1, 1977•22 citations

Enlargement of Kinetic Inductance of NbN Superconducting Thin Films for Device Applications

Mohammad Sajjad Hossain, Keiji Yoshida, Keisuke Kudo +2 more

Experimental studies to enlarge kinetic inductance of NbN thin films using the effects of quality and thickness of the film are made by measuring Fiske current steps in the current-voltage (I-V) characteristics of NbN/Pb-In Josephson junctions. Experiments demonstrate that the specific kinetic inductance L K can be enlarged over a wide range by changing stoichiometry of the film, as well as by making the film thickness thin, and that this enlargement becomes larger by both effects when the film thickness is in an ultra thin regime. This inductance is shown to be well fitted to L K=µ0λ2/d, w h e r e µ_0 i s t h e v a c u u m p e r m e a b i l i t y, d i s t h e t h i c k n e s s, a n d λ i s t h e m a g n e t i c p e n e t r a t i o n d e p t h i n t h e d i r t y l i m i t. I n t h e p r e s e n t e x p e r i m e n t w e a t t a i n e d t h e i n d u c t a n c e a s h i g h a s L_K=130 p H b y t h e c o m b i n e d e f f e c t s o f i m p u r i t y a n d t h i c k n e s s f o r a f i l m w i t h

Japanese Journal of Applied Physics•Apr 1, 1992•8 citations
The authors have been developing an analog amplifier utilizing a flux flow phenomena in a Josephson line, i.e. the flux-flow-type Josephson amplifier (FFA). The FFA converts a signal current I/sub s/ to a voltage V/sub dc/ across the Josephson line, and the I/sub s/-V/sub dc/ characteristic determines the performance of the FFA, e.g. the gain and saturation level. Studies have been made to improve the I/sub s/-V/sub dc/ relation. It is shown that the transresistance can be improved significantly by reducing the width of the Josephson line and increasing the kinetic inductance of the line. The kinetic inductance can be increased by thinning the line electrode and by using an electrode with large London penetration depth, such as NbN. The transresistance obtained is as large as 6.8 Omega for NbN/Pb-alloy Josephson lines with a thickness of 5 nm and a width of 4 mu m. It is also shown that the linear operating range of the amplifier is as large as 1 mV.>
A theoretical and experimental study of the coupling of the flux-flow-type Josephson oscillator (FFO) to an external stripline has been carried out to overcome the large impedance mismatch between them. For efficient coupling and impedance matching at millimeter and submillimeter wavelengths, the authors have proposed a scheme where the Josephson oscillator is inductively coupled to the stripline by a thin superconducting electrode. Theoretical modeling of the coupling section and the design of the stripline impedance-transformer have been carried out. In a preliminary experiment, the authors obtained a power of about 10/sup -7/ W emitted from the FFO into the stripline in the frequency range from 184 GHz to 193 GHz.>
In order to realize efficient coupling between a flux-flow type Josephson oscillator (FFO) and an external stripline, the authors carried out experiments to investigate the inductive coupling scheme in a strong coupling regime. By adopting NbN films with large penetration depths as electrodes for strong coupling, they were able to realize coupling sections with a coupling coefficient alpha =M/ square root L/sub 1/L/sub 2/ as large as 0.7, with M, L/sub 1/, and L/sub 2/ being mutual inductance, self-inductances of, the FFO, and the stripline, respectively. Using this design for the coupling, the authors succeeded in detecting AC fields at frequencies around 150 GHz, which were emitted from FFO to the stripline via the coupling section.
Power emission from a flux-flow-type Josephson oscillator with a thin-film coupling method is studied experimentally. The thickness of one electrode of the oscillator is made thin enough to allow electromagnetic fields generated by the oscillator to be emitted through the thin-film electrode. Radiation power from the oscillator is detected with superconductor-insulator-superconductor detectors, which are fabricated on top of the oscillator. Experimental results show that sufficient power can be obtained from the oscillator by using the thin-film coupling method when the thickness of the electrode is comparable to the London penetration depth. The results obtained are in reasonable agreement with theoretical predictions. The thin-film coupling method will be useful when the oscillator is connected to external circuits, such as an impedance matching circuit.
Thin electrode flux penetration effects in Josephson tunneling gates are analyzed and experimental results exhibiting these effects are reported for the first time. Deep flux penetration accompanied by deep current penetration contribute added inductance not coupled to the external field, reducing sensitivity to control current. In addition, the field within the lower electrode reduces the end-to-end asymmetry introduced by the superconducting ground plane and makes the threshold characteristic more symmetrical. The thin film effects are embodied in an equivalent circuit. Experimental results for devices with thick and thin films are compared showing the expected increased symmetry and reduced sensitivity for the thin film case. Experimental results agree well with calculations based on the equivalent circuit.
Experimental studies to enlarge kinetic inductance of NbN thin films using the effects of quality and thickness of the film are made by measuring Fiske current steps in the current-voltage (I-V) characteristics of NbN/Pb-In Josephson junctions. Experiments demonstrate that the specific kinetic inductance L K can be enlarged over a wide range by changing stoichiometry of the film, as well as by making the film thickness thin, and that this enlargement becomes larger by both effects when the film thickness is in an ultra thin regime. This inductance is shown to be well fitted to L K=µ0λ2/d, w h e r e µ_0 i s t h e v a c u u m p e r m e a b i l i t y, d i s t h e t h i c k n e s s, a n d λ i s t h e m a g n e t i c p e n e t r a t i o n d e p t h i n t h e d i r t y l i m i t. I n t h e p r e s e n t e x p e r i m e n t w e a t t a i n e d t h e i n d u c t a n c e a s h i g h a s L_K=130 p H b y t h e c o m b i n e d e f f e c t s o f i m p u r i t y a n d t h i c k n e s s f o r a f i l m w i t h