Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Journal of Applied Physics

Flux-flow-type Josephson oscillator for millimeter and submillimeter wave region. IV. Thin-film coupling

Jiaqian Qin, Keiji Enpuku, Keiji Yoshida

Published Feb 15, 1988• 69 citations
Publisher

Abstract

Power emission from a flux-flow-type Josephson oscillator with a thin-film coupling method is studied experimentally. The thickness of one electrode of the oscillator is made thin enough to allow electromagnetic fields generated by the oscillator to be emitted through the thin-film electrode. Radiation power from the oscillator is detected with superconductor-insulator-superconductor detectors, which are fabricated on top of the oscillator. Experimental results show that sufficient power can be obtained from the oscillator by using the thin-film coupling method when the thickness of the electrode is comparable to the London penetration depth. The results obtained are in reasonable agreement with theoretical predictions. The thin-film coupling method will be useful when the oscillator is connected to external circuits, such as an impedance matching circuit.

DOI
10.1063/1.340019

Related papers

Millimeterwave emission from Josephson oscillator through thin film junction electrode

Keiji Yoshida, Tadao Nagatsuma, S. Kumataka +1 more

An experiment on the coupling of the flux-flow type Josephson oscillator to SIS detectors by inductive coupling scheme has been carried out. Radiated powers from the Josephson oscillator were detected by an array of Josephson tunnel junctions fabricated on top of the upper electrode of the oscillator. The thickness of the common electrode was made thin enough to allow inductive coupling through the electrode. The maximum value of the obtained voltage amplitude of the emitted wave from the oscillator was 1.7mV, which is in reasonable agreement with the theoretical one. The present method can be an efficient coupling scheme between the Josephson oscillator and external circuits.

IEEE Transactions on Magnetics•Mar 1, 1987•12 citations

Inductive coupling of a flux-flow type Josephson oscillator to a stripline

Keiji Yoshida, J. Qin, Keiji Enpuku

A theoretical and experimental study of the coupling of the flux-flow-type Josephson oscillator (FFO) to an external stripline has been carried out to overcome the large impedance mismatch between them. For efficient coupling and impedance matching at millimeter and submillimeter wavelengths, the authors have proposed a scheme where the Josephson oscillator is inductively coupled to the stripline by a thin superconducting electrode. Theoretical modeling of the coupling section and the design of the stripline impedance-transformer have been carried out. In a preliminary experiment, the authors obtained a power of about 10/sup -7/ W emitted from the FFO into the stripline in the frequency range from 184 GHz to 193 GHz.>

IEEE Transactions on Magnetics•Mar 1, 1989•11 citations

Flux-flow-type Josephson oscillator for millimeter and submillimeter wave region. II. Modeling

Tadao Nagatsuma, Keiji Enpuku, Keiji Yoshida +1 more

A theoretical study is made of a travelling-wave-type oscillator, which utilizes a flux flow in a long Josephson junction for use as a local oscillator in the integrated superconducting receiver system. An internal electromagnetic field of the oscillator junction in the flux-flow state is investigated both numerically and analytically. It is shown that the voltage amplitude of the internal oscillation increases gradually in the direction of the flux flow and reaches a maximum value at the junction end. An equivalent circuit of the oscillator is also obtained, which gives dependences of the emitted radiation on frequency, magnetic field, and load. It is shown that the output power attains the value of the order of 10−6 W in the frequency range between 100 and 500 GHz, and that the output power and the radiation frequency can be controlled by both the bias voltage and the applied magnetic field. These theoretical results explain quantitatively the experimental ones with a Pb-alloy long junction of length 24 λJ.

Journal of Applied Physics•Dec 1, 1984•114 citations

Flux-flow type Josephson oscillator for millimeter and submillimeter wave region

Tadao Nagatsuma, Keiji Enpuku, F. Irie +1 more

An oscillator which utilizes the effect of the vortex motion in long Josephson tunnel junctions, i.e., flux flow, has been presented in millimeter and submillimeter wave region. An electromagnetic wave generated by the oscillator is detected with a small tunnel junction as a detector with a refined coupling configuration. Quantitative evaluation of the detected power showed that the detected power attained the value of 10−6 W in the frequency range between 100 and 400 GHz, which is far superior to previous results. Frequency and magnetic field dependences of the present system were also measured, which showed that the output power was able to be controlled by the dc magnetic field. The present oscillator will be promising as the local oscillator in the integrated Josephson receiver systems.

Journal of Applied Physics•Jun 1, 1983•202 citations

Design and performance of flux-flow type Josephson oscillator coupled to a stripline

Keiji Yoshida, Keisuke Kudo, Keiji Enpuku

In order to realize efficient coupling between a flux-flow type Josephson oscillator (FFO) and an external stripline, the authors carried out experiments to investigate the inductive coupling scheme in a strong coupling regime. By adopting NbN films with large penetration depths as electrodes for strong coupling, they were able to realize coupling sections with a coupling coefficient alpha =M/ square root L/sub 1/L/sub 2/ as large as 0.7, with M, L/sub 1/, and L/sub 2/ being mutual inductance, self-inductances of, the FFO, and the stripline, respectively. Using this design for the coupling, the authors succeeded in detecting AC fields at frequencies around 150 GHz, which were emitted from FFO to the stripline via the coupling section.

IEEE Transactions on Magnetics•Mar 1, 1991•4 citations

On-chip radiation detection from stacked Josephson flux-flow oscillators

S. V. Shitov, Alexey Vladimirovich Ustinov, N. N. Iosad +1 more

Radiation measurements with double-junction stacked Josephson flux-flow oscillator on-chip coupled to a superconductor–insulator–superconductor detector are reported. Impedance matching between the oscillator and the detector has been achieved using a broad band coupling circuit. Radiation power in the detector up to 10 nW has been measured in the frequency range between 170 and 410 GHz. Coherent radiation from two stacked junctions has been observed both at the fundamental Josephson frequency and at its second harmonic. The distribution of the radiation power between the first two harmonics allows us to distinguish between mutually coupled in-phase and out-of-phase flux-flow modes in the junctions. Coherent operation of stacked Josephson junction oscillators in the millimeter and sub-millimeter wave band is demonstrated.

Journal of Applied Physics•Dec 15, 1996•10 citations
Power emission from a flux-flow-type Josephson oscillator with a thin-film coupling method is studied experimentally. The thickness of one electrode of the oscillator is made thin enough to allow electromagnetic fields generated by the oscillator to be emitted through the thin-film electrode. Radiation power from the oscillator is detected with superconductor-insulator-superconductor detectors, which are fabricated on top of the oscillator. Experimental results show that sufficient power can be obtained from the oscillator by using the thin-film coupling method when the thickness of the electrode is comparable to the London penetration depth. The results obtained are in reasonable agreement with theoretical predictions. The thin-film coupling method will be useful when the oscillator is connected to external circuits, such as an impedance matching circuit.
An experiment on the coupling of the flux-flow type Josephson oscillator to SIS detectors by inductive coupling scheme has been carried out. Radiated powers from the Josephson oscillator were detected by an array of Josephson tunnel junctions fabricated on top of the upper electrode of the oscillator. The thickness of the common electrode was made thin enough to allow inductive coupling through the electrode. The maximum value of the obtained voltage amplitude of the emitted wave from the oscillator was 1.7mV, which is in reasonable agreement with the theoretical one. The present method can be an efficient coupling scheme between the Josephson oscillator and external circuits.
A theoretical and experimental study of the coupling of the flux-flow-type Josephson oscillator (FFO) to an external stripline has been carried out to overcome the large impedance mismatch between them. For efficient coupling and impedance matching at millimeter and submillimeter wavelengths, the authors have proposed a scheme where the Josephson oscillator is inductively coupled to the stripline by a thin superconducting electrode. Theoretical modeling of the coupling section and the design of the stripline impedance-transformer have been carried out. In a preliminary experiment, the authors obtained a power of about 10/sup -7/ W emitted from the FFO into the stripline in the frequency range from 184 GHz to 193 GHz.>
A theoretical study is made of a travelling-wave-type oscillator, which utilizes a flux flow in a long Josephson junction for use as a local oscillator in the integrated superconducting receiver system. An internal electromagnetic field of the oscillator junction in the flux-flow state is investigated both numerically and analytically. It is shown that the voltage amplitude of the internal oscillation increases gradually in the direction of the flux flow and reaches a maximum value at the junction end. An equivalent circuit of the oscillator is also obtained, which gives dependences of the emitted radiation on frequency, magnetic field, and load. It is shown that the output power attains the value of the order of 10−6 W in the frequency range between 100 and 500 GHz, and that the output power and the radiation frequency can be controlled by both the bias voltage and the applied magnetic field. These theoretical results explain quantitatively the experimental ones with a Pb-alloy long junction of length 24 λJ.
An oscillator which utilizes the effect of the vortex motion in long Josephson tunnel junctions, i.e., flux flow, has been presented in millimeter and submillimeter wave region. An electromagnetic wave generated by the oscillator is detected with a small tunnel junction as a detector with a refined coupling configuration. Quantitative evaluation of the detected power showed that the detected power attained the value of 10−6 W in the frequency range between 100 and 400 GHz, which is far superior to previous results. Frequency and magnetic field dependences of the present system were also measured, which showed that the output power was able to be controlled by the dc magnetic field. The present oscillator will be promising as the local oscillator in the integrated Josephson receiver systems.
In order to realize efficient coupling between a flux-flow type Josephson oscillator (FFO) and an external stripline, the authors carried out experiments to investigate the inductive coupling scheme in a strong coupling regime. By adopting NbN films with large penetration depths as electrodes for strong coupling, they were able to realize coupling sections with a coupling coefficient alpha =M/ square root L/sub 1/L/sub 2/ as large as 0.7, with M, L/sub 1/, and L/sub 2/ being mutual inductance, self-inductances of, the FFO, and the stripline, respectively. Using this design for the coupling, the authors succeeded in detecting AC fields at frequencies around 150 GHz, which were emitted from FFO to the stripline via the coupling section.
Radiation measurements with double-junction stacked Josephson flux-flow oscillator on-chip coupled to a superconductor–insulator–superconductor detector are reported. Impedance matching between the oscillator and the detector has been achieved using a broad band coupling circuit. Radiation power in the detector up to 10 nW has been measured in the frequency range between 170 and 410 GHz. Coherent radiation from two stacked junctions has been observed both at the fundamental Josephson frequency and at its second harmonic. The distribution of the radiation power between the first two harmonics allows us to distinguish between mutually coupled in-phase and out-of-phase flux-flow modes in the junctions. Coherent operation of stacked Josephson junction oscillators in the millimeter and sub-millimeter wave band is demonstrated.