Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE

Adaptive Optical Logic And Switching Devices

David Kagan, Harry Friedmann

Published Mar 10, 1988• 1 citation
Publisher

Abstract

Tunable Optical Bistability, where a low power control beam is used to adapt the hysteresis response and the switching of optically bistable elements, is shown to occur in various systems with a bichromatic input. Some applications of this are suggested for more complex logic gates and for pattern recognition.
DOI
10.1117/12.942375

Related papers

Optical Error Correction by Adaptive Thresholding

David Kagan, Harry Friedmann

During the last few years we have suggested1−2 the use of a four-level system irradiated by a bichromatic beam to obtain a tunable optical bistable device. By tunable we mean that the switching threshold can be altered without changing the hardware characteristics, the operating temperature, or the frequencies of the inputs to the device. The basic principle of our suggestion is that by irradiating the non-linear optical material by two beams of appropriately chosen frequencies in an optical cavity, one can act as a signal and the other as tuning control beam. The advantage of the four level system lay in the possibility of using low power control beams which could tune the characteristic optically bistable output curves.

Optical Computing•Jan 1, 1989•0 citations

Optical Bistability

Guang S. He

When the output parameter of an optical device could be a multivalued function of the input parameter, this device can be working in an optical bistable status. The most typical optical bistable device is a Fabry–Perot cavity containing a nonlinear optical medium, the refractive index of which depends on the light intensity. Upon the action of an intense input optical beam, the transmitted (or reflected) intensity of this device may exhibit a nonlinear response to the incident light intensity variation and, especially under appropriate working conditions, the characteristic output/input curve may manifest a single (or multiple) hysteresis loop(s). Such type of optical bistable device can be used as an optical differential amplifier, optical switch, optical limiter, optical clipper, optical discriminator, or an optical memory element, depending on the chosen nonlinear medium and operation conditions.

Oxford University Press eBooks•Oct 30, 2014•1 citation

Controlled steady-state switching in optical bistability

Andy Brown, Amitabh Joshi, Min Xiao

Optical switching has been achieved between two steady states of optical bistability generated in a system with three-level atoms inside an optical cavity. The optical power switching is controlled by adding short positive (switching up) or negative (switching down) pulses to the input intensity. The coupling laser beam in the three-level atomic system is used to control the threshold value and the width of the hysteresis cycle, which can adjust and optimize the optical switching process.

Applied Physics Letters•Aug 12, 2003•68 citations

Observation of mirrorless optical bistability and optical limiting using Stark tunable gases

D. Pepper, M. B. Klein

We report on the observation of optical limiting and bistability using Stark tunable gases in a mirrorless geometry. Device applications such as multilevel logic elements and optical limiters are presented. Polarization and saturation effects as well as switching energies are discussed.

IEEE Journal of Quantum Electronics•Dec 1, 1979•7 citations

Tunable optical bistability of bichromatic fields interacting with four-level systems

D. Kagan, Harry Friedmann

A simple four-level model is used to describe two-band systems such as dyes and semiconductors. The system is irradiated by a bichromatic input in an optical cavity and both fields exhibit optical multistability. The calculations take into account the possibility of noncoherent (electrical) pumping of the system, thus generalizing the model to include semiconductor laser amplifiers. Since both fields are allowed to resonate in the cavity, a low-intensity control beam and/or the noncoherent pumping intensity can 'tune' and adapt the response of the second input. Some applications of this tunability are outlined.>

IEEE Journal of Quantum Electronics•Jun 1, 1989•3 citations

Optical bistability using a Fabry–Perot semiconductor-laser amplifier with two holding beams

Hitoshi Kawaguchi, Kyo Inoue, Hiroyuki Tani

Bistable switching of an optical signal beam by a control beam with a different wavelength, using the nonlinearity of a Fabry-Perot semiconductor-laser amplifier, is reported for the first time to the authors' knowledge. Depending on the initial detuning of the optical signal beam, both normal (counterclockwise) and reverse (clockwise) hysteresis are theoretically and experimentally obtained in the signal output power as a function of the control input power.

Optics Letters•Jul 1, 1987•32 citations
During the last few years we have suggested1−2 the use of a four-level system irradiated by a bichromatic beam to obtain a tunable optical bistable device. By tunable we mean that the switching threshold can be altered without changing the hardware characteristics, the operating temperature, or the frequencies of the inputs to the device. The basic principle of our suggestion is that by irradiating the non-linear optical material by two beams of appropriately chosen frequencies in an optical cavity, one can act as a signal and the other as tuning control beam. The advantage of the four level system lay in the possibility of using low power control beams which could tune the characteristic optically bistable output curves.
When the output parameter of an optical device could be a multivalued function of the input parameter, this device can be working in an optical bistable status. The most typical optical bistable device is a Fabry–Perot cavity containing a nonlinear optical medium, the refractive index of which depends on the light intensity. Upon the action of an intense input optical beam, the transmitted (or reflected) intensity of this device may exhibit a nonlinear response to the incident light intensity variation and, especially under appropriate working conditions, the characteristic output/input curve may manifest a single (or multiple) hysteresis loop(s). Such type of optical bistable device can be used as an optical differential amplifier, optical switch, optical limiter, optical clipper, optical discriminator, or an optical memory element, depending on the chosen nonlinear medium and operation conditions.
A simple four-level model is used to describe two-band systems such as dyes and semiconductors. The system is irradiated by a bichromatic input in an optical cavity and both fields exhibit optical multistability. The calculations take into account the possibility of noncoherent (electrical) pumping of the system, thus generalizing the model to include semiconductor laser amplifiers. Since both fields are allowed to resonate in the cavity, a low-intensity control beam and/or the noncoherent pumping intensity can 'tune' and adapt the response of the second input. Some applications of this tunability are outlined.>