Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE

Control of light tunneling through electromagnetically induced transparency-like metamaterials

Tuanhui Feng, Limin Wang, Yunhui Li

Published Dec 31, 2013• 0 citations
Publisher

Abstract

Light tunneling phenomenon controlled by electromagnetically-induced-transparency-like (EIT-like) metamaterials is investigated. The numerical results show that, when a EIT-like metamaterial layer is introduced at the interface of a pair structure constructed by two kinds of single-negative metamaterials, the EIT-like system can give rise to the enhancement of Q-factor of the tunneling mode. Moreover, the Q-factor can be tuned by altering paremeters of the EIT-like metamaterial. Compared with the traditional method of increasing confinement, the presented way has the advantages of miniaturized device volume and less transmission losses.

DOI
10.1117/12.2033749

Related papers

Light tunneling effect tuned by a meta-interface with electromagnetically-induced-transparency-like properties

Tuanhui Feng, Fei Yang, Yunhui Li +5 more

In this letter, light tunneling effect tuned by a meta-interface with electromagnetically-induced-transparency-like (EIT-like) properties is investigated. Both numerical and experimental results show that the Q-factor of tunneling mode can be well enhanced when an atomic-like three-level system with EIT-like properties is introduced at the interface of a pair structure constructed by epsilon-negative and mu-negative metamaterials. Further study reveals that the Q-factor can be tuned conveniently by altering the EIT-like meta-interface. Moreover, these advantages are not at costs of increase of volume and drastic reduction of transmittance.

Applied Physics Letters•Jun 24, 2013•7 citations

Nonlinear properties of light-tunneling heterostructures embedded with a highly dispersive meta-molecule

Yongqiang Chen, Yunhui Li, Kejia Zhu +4 more

We experimentally and theoretically investigate the nonlinear electromagnetic properties of light-tunneling heterostructures embedded with a varactor-loaded electromagnetically-induced-transparency (EIT)-like highly dispersive meta-molecule. We illustrate that when an EIT-like meta-molecule is hired at the interface of e-negative medium and µ-negative medium, the Q-factor and corresponding local fields of tunneling modes can be greatly boosted. Further study reveals that the electromagnetic (EM) field confinement along the propagating direction provided by the heterostructures, and the in-plane localization originated from the EIT-like meta-molecule, give rise to the three-dimensional enhancement of sub-wavelength EM localization corporately. Moreover, such a configuration can generate an extremely high transmission contrast up to 12 dB between two bistable states in its transmission with a bistability threshold low to −4.7 dBm. These advantages are not at the cost of extra device volume and drastic reduction of transmittance.

Optical Materials Express•Oct 29, 2018•6 citations

Research on analogue of electromagnetically induced transparency effect based on asymmetric structure all-dielectric metamaterial

Yuebin Zhang, Chengju Ma, Yao Zhang +4 more

The electromagnetically induced transparency (EIT), which is a result of destructive interference between different excitation paths in a three-energy-level atomic medium, makes opaque probe light transparent over a range of frequencies. As this EIT effect is usually accompanied with strong dispersion, it has potential applications such as slow light propagation, optical buffering, nonlinear optics, optical sensing, etc. However, for conventional quantum EIT effect which requires stable gas lasers and low temperature environment, the implementation of EIT in chip-scale applications is severely hampered by the scathing experimental requirements. Recently, the EIT-like effect in metamaterials, which are constructed by designing the artificial subwavelength functional elements and arranging the spatial sequences, attracts tremendous attention because of its advantages, such as room temperature manipulability, large bandwidth, and small sizes. In addition, the high-quality factor(Q) value obtained by EIT-like effect has great significance in designing the metamaterial-based devices. In this paper, we design an EIT-like metamaterial with such a structure. The unit cell of the proposed metamaterial is constructed by two asymmetric silicon blocks embedded on a silicon dioxide substrate. Meanwhile, we analyze its optical properties and EIT-like effects by using three-dimension (3D) FDTD method. Based on the coupled Lorentz model, the EIT-like effect of the designed metamaterial is investigated. Then, by employing the electric field distribution on the surface of the metamaterial, and combining with the three-level atomic system, the mechanism of the EIT-like effect is analyzed in detail. We find that the EIT-like effect in the proposed metamaterial has high Q value (Q ≈ 8616) and the high transmission (T = 96%). By changing the length of the silicon block to destroy the asymmetry of the metamaterial structure, an active tuning EIT-like effect is realized. Furthermore, the metamaterial structure has the advantages of low loss, easy preparation, and active-controllability. This study represents an innovative approach to designing the EIT-like metamaterial, which is expected to be useful for designing active tunable slow-light devices and highly sensitive optical sensors.

Acta Physica Sinica•Jan 1, 2021•4 citations

A planar metamaterial design for electromagnetically induced transparency

ُ S Ahmadi, Ali Rezaei-Latifi

Electromagnetically induced transparency is an optical phenomenon that is characterized by the elimination of the effect of a medium on a propagating beam of electromagnetic radiation in a specific frequency band. In this study, EIT was investigated at a proposed metamaterial with the dimensions milimeter and in the area of frequency of GHz. The computation results indicated that EIT with high transmission rate and high Q factor occurs in certain frequencies by breaking the symmetry in this structure. The sensitivity studies showed that the use of silver in the structure increases the quality factor so significantly that this quantity reaches 338 for gold and copper, while it reaches 677 for silver. In addition, By reducing the temperature, the transmission rate in the structure increases and reaches acceptable degree 98%. This structure can be an appropriate option for slow light usages, and it can be utilized for light amplification in microwave structures.

•Jun 1, 2018•0 citations

Plasmonic metamaterial for electromagnetically induced transparency analogue and ultra-high figure of merit sensor

Dong Wu, Yumin Liu, Li Yu +7 more

In this work, using finite-difference time-domain method, we propose and numerically demonstrate a novel way to achieve electromagnetically induced transparency (EIT) phenomenon in the reflection spectrum by stacking two different types of coupling effect among different elements of the designed metamaterial. Compared with the conventional EIT-like analogues coming from only one type of coupling effect between bright and dark meta-atoms on the same plane, to our knowledge the novel approach is the first to realize the optically active and precise control of the wavelength position of EIT-like phenomenon using optical metamaterials. An on-to-off dynamic control of the EIT-like phenomenon also can be achieved by changing the refractive index of the dielectric substrate via adjusting an optical pump pulse. Furthermore, in near infrared region, the metamaterial structure can be operated as an ultra-high resolution refractive index sensor with an ultra-high figure of merit (FOM) reaching 3200, which remarkably improve the FOM value of plasmonic refractive index sensors. The novel approach realizing EIT-like spectral shape with easy adjustment to the working wavelengths will open up new avenues for future research and practical application of active plasmonic switch, ultra-high resolution sensors and active slow-light devices.

Scientific Reports•Mar 23, 2017•63 citations

Electromagnetically induced transparency metamaterials: theories, designs and applications

Lei Zhu, Liang Dong

Abstract Electromagnetically induced transparency (EIT) stems from a quantum system, where an opaque atomic medium appears the narrow transparent state within a wide absorption area. This phenomenon can be achieved by quantum interference of pumping light and detecting light at different energy levels of transitions. In the generation process of EIT effect, in addition to transparent state, the atomic medium is usually accompanied with a strong dispersion effect, which will bright about a significant reduction of light velocity, thus realizing many important applications, such as slow light propagations. Although the EIT effect has many important applications, its application scenarios are greatly limited due to the fact that EIT realization usually requires specific and complicated conditions, such as refrigeration temperature, high intensity laser, etc. Recently, the analogue of EIT effect in metamaterial has attracted increasing attentions due to its advantages such as controllable room temperature and large operating bandwidth. Metamaterial analogue of EIT effect has become a new research focus. In this article, we review current research progresses on EIT metamaterials. Firstly, we describe the theoretical models for analyzing EIT metamaterials, including the mechanical oscillator model and the equivalent circuit model. Then, we describe the simulations, designs and experiments of passive EIT metamaterials with fixed structures and active EIT metamaterials with tunable elements. Furthermore, the applications of EIT metamaterials in the areas of slow lights, sensings, absorptions and other fields are also reviewed. Finally, the possible directions and key issues of future EIT metamaterial researches are prospected.

Journal of Physics D Applied Physics•Mar 25, 2022•60 citations
Light tunneling phenomenon controlled by electromagnetically-induced-transparency-like (EIT-like) metamaterials is investigated. The numerical results show that, when a EIT-like metamaterial layer is introduced at the interface of a pair structure constructed by two kinds of single-negative metamaterials, the EIT-like system can give rise to the enhancement of Q-factor of the tunneling mode. Moreover, the Q-factor can be tuned by altering paremeters of the EIT-like metamaterial. Compared with the traditional method of increasing confinement, the presented way has the advantages of miniaturized device volume and less transmission losses.
In this letter, light tunneling effect tuned by a meta-interface with electromagnetically-induced-transparency-like (EIT-like) properties is investigated. Both numerical and experimental results show that the Q-factor of tunneling mode can be well enhanced when an atomic-like three-level system with EIT-like properties is introduced at the interface of a pair structure constructed by epsilon-negative and mu-negative metamaterials. Further study reveals that the Q-factor can be tuned conveniently by altering the EIT-like meta-interface. Moreover, these advantages are not at costs of increase of volume and drastic reduction of transmittance.
We experimentally and theoretically investigate the nonlinear electromagnetic properties of light-tunneling heterostructures embedded with a varactor-loaded electromagnetically-induced-transparency (EIT)-like highly dispersive meta-molecule. We illustrate that when an EIT-like meta-molecule is hired at the interface of e-negative medium and µ-negative medium, the Q-factor and corresponding local fields of tunneling modes can be greatly boosted. Further study reveals that the electromagnetic (EM) field confinement along the propagating direction provided by the heterostructures, and the in-plane localization originated from the EIT-like meta-molecule, give rise to the three-dimensional enhancement of sub-wavelength EM localization corporately. Moreover, such a configuration can generate an extremely high transmission contrast up to 12 dB between two bistable states in its transmission with a bistability threshold low to −4.7 dBm. These advantages are not at the cost of extra device volume and drastic reduction of transmittance.
The electromagnetically induced transparency (EIT), which is a result of destructive interference between different excitation paths in a three-energy-level atomic medium, makes opaque probe light transparent over a range of frequencies. As this EIT effect is usually accompanied with strong dispersion, it has potential applications such as slow light propagation, optical buffering, nonlinear optics, optical sensing, etc. However, for conventional quantum EIT effect which requires stable gas lasers and low temperature environment, the implementation of EIT in chip-scale applications is severely hampered by the scathing experimental requirements. Recently, the EIT-like effect in metamaterials, which are constructed by designing the artificial subwavelength functional elements and arranging the spatial sequences, attracts tremendous attention because of its advantages, such as room temperature manipulability, large bandwidth, and small sizes. In addition, the high-quality factor(Q) value obtained by EIT-like effect has great significance in designing the metamaterial-based devices. In this paper, we design an EIT-like metamaterial with such a structure. The unit cell of the proposed metamaterial is constructed by two asymmetric silicon blocks embedded on a silicon dioxide substrate. Meanwhile, we analyze its optical properties and EIT-like effects by using three-dimension (3D) FDTD method. Based on the coupled Lorentz model, the EIT-like effect of the designed metamaterial is investigated. Then, by employing the electric field distribution on the surface of the metamaterial, and combining with the three-level atomic system, the mechanism of the EIT-like effect is analyzed in detail. We find that the EIT-like effect in the proposed metamaterial has high Q value (Q ≈ 8616) and the high transmission (T = 96%). By changing the length of the silicon block to destroy the asymmetry of the metamaterial structure, an active tuning EIT-like effect is realized. Furthermore, the metamaterial structure has the advantages of low loss, easy preparation, and active-controllability. This study represents an innovative approach to designing the EIT-like metamaterial, which is expected to be useful for designing active tunable slow-light devices and highly sensitive optical sensors.
Electromagnetically induced transparency is an optical phenomenon that is characterized by the elimination of the effect of a medium on a propagating beam of electromagnetic radiation in a specific frequency band. In this study, EIT was investigated at a proposed metamaterial with the dimensions milimeter and in the area of frequency of GHz. The computation results indicated that EIT with high transmission rate and high Q factor occurs in certain frequencies by breaking the symmetry in this structure. The sensitivity studies showed that the use of silver in the structure increases the quality factor so significantly that this quantity reaches 338 for gold and copper, while it reaches 677 for silver. In addition, By reducing the temperature, the transmission rate in the structure increases and reaches acceptable degree 98%. This structure can be an appropriate option for slow light usages, and it can be utilized for light amplification in microwave structures.
In this work, using finite-difference time-domain method, we propose and numerically demonstrate a novel way to achieve electromagnetically induced transparency (EIT) phenomenon in the reflection spectrum by stacking two different types of coupling effect among different elements of the designed metamaterial. Compared with the conventional EIT-like analogues coming from only one type of coupling effect between bright and dark meta-atoms on the same plane, to our knowledge the novel approach is the first to realize the optically active and precise control of the wavelength position of EIT-like phenomenon using optical metamaterials. An on-to-off dynamic control of the EIT-like phenomenon also can be achieved by changing the refractive index of the dielectric substrate via adjusting an optical pump pulse. Furthermore, in near infrared region, the metamaterial structure can be operated as an ultra-high resolution refractive index sensor with an ultra-high figure of merit (FOM) reaching 3200, which remarkably improve the FOM value of plasmonic refractive index sensors. The novel approach realizing EIT-like spectral shape with easy adjustment to the working wavelengths will open up new avenues for future research and practical application of active plasmonic switch, ultra-high resolution sensors and active slow-light devices.
Abstract Electromagnetically induced transparency (EIT) stems from a quantum system, where an opaque atomic medium appears the narrow transparent state within a wide absorption area. This phenomenon can be achieved by quantum interference of pumping light and detecting light at different energy levels of transitions. In the generation process of EIT effect, in addition to transparent state, the atomic medium is usually accompanied with a strong dispersion effect, which will bright about a significant reduction of light velocity, thus realizing many important applications, such as slow light propagations. Although the EIT effect has many important applications, its application scenarios are greatly limited due to the fact that EIT realization usually requires specific and complicated conditions, such as refrigeration temperature, high intensity laser, etc. Recently, the analogue of EIT effect in metamaterial has attracted increasing attentions due to its advantages such as controllable room temperature and large operating bandwidth. Metamaterial analogue of EIT effect has become a new research focus. In this article, we review current research progresses on EIT metamaterials. Firstly, we describe the theoretical models for analyzing EIT metamaterials, including the mechanical oscillator model and the equivalent circuit model. Then, we describe the simulations, designs and experiments of passive EIT metamaterials with fixed structures and active EIT metamaterials with tunable elements. Furthermore, the applications of EIT metamaterials in the areas of slow lights, sensings, absorptions and other fields are also reviewed. Finally, the possible directions and key issues of future EIT metamaterial researches are prospected.