Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Journal of the Optical Society of America B

Optical determination of alkali metal vapor number density in the vicinity (∼10^-5 cm ) of cell surfaces

Kaifeng Zhao, Z. Wu, H. M. Lai

Published Dec 1, 2001• 16 citations
Publisher

Abstract

We describe a method for determining the number density of the alkali metal vapor by use of an evanescent wave in a single total internal reflection. The method is simple to use, and it has the following useful features: It is most suitable for determining the number density of dense (>1013 cm-3) alkali metal vapor and it permits the measurement of the alkali metal vapor number density in the vicinity (∼10-5 cm) of cell surfaces. Using this method, we measured the number density of Rb metal vapor in the vicinity (∼10-5 cm) of the cell wall in cells that contain only Rb metal and no buffer gas; we found that there is no systematic difference between the Rb number density near the surface and that in the bulk.

DOI
10.1364/josab.18.001904

Related papers

Transverse measurements of polarization in optically pumped Rb vapor cells

Joan Dreiling, Eric B. Norrgard, D. Tupa +1 more

We have developed a simple heuristic method for determining the polarization of an optically pumped alkali-metal vapor. A linearly polarized probe beam traverses a vapor cell perpendicular to the pump-beam propagation direction, and the transmitted beam intensity is monitored for orthogonal linear polarizations. As the probe beam is scanned in frequency across the ${D}_{1}$ transition, its linear-polarization-dependent transmission can be used as a measure of the atomic orientation of the vapor. We analyze these transmission differences and their dependence on the alkali-metal number density in the vapor.

Physical Review A•Nov 26, 2012•6 citations

Optical determination of alkali metal vapor number density using Faraday rotation

Z. Wu, Masao Kitano, W. Happer +2 more

We present a convenient and reliable method for measuring the number density of the alkali metal vapor. The method is based on the diamagnetic Faraday rotation of the plane of polarization of nearly resonant light by the alkali metal vapor, and it is suitable for optically thick vapor where the conventional integrated absorption technique fails.

Applied Optics•Dec 1, 1986•78 citations

An Interferometric Technique Of Density Measurement Applied To Alkali-metal Vapors Oriented By Optical Pumping.

Steven Jarrett

III-8.Comparison of optical pumping signals for two spherical cells with different buffer gas pressures as a function of density times diameter of cell for equal D2/D1.60 IV-1.Energy level diagram showing hyperfine structure of Rb Di line.Units are 10*3 cm-1.67 IV-2.Equivalent circuit for rate equations involving ex change polarization.73 IV-3.Diagram of optical system for optical pumping of Rb. 83 IV-4.Block diagram of Rb optical pumping signal detection system.85 IV-5.Block diagram of Rb light detection system.90 IV-6.Typical photograph from which relaxation time measure ments are made..Time increases from left to right.Scale is 1 millisecond per division.92 IV-7.Lines determined from measurements on time dependence of Rb87 signals at 50°C for the two different light in tensities.Scatter of points is too small to be notice able on graph.93 A-1.Spectral profile of D1 radiation from a Varian spectral lamp containing natural Rb.Ill A-2.Spectral profile of Di radiation from a Varian spectral lamp containing Rb87.112 A-3-Spectral profile of Di radiation from a Varian spectral lamp containing Rb87 after filtering by an Rb85 absorption cell.113 vi CHAPTER I2 atomic ground states and the parameters of various relaxation processes of gaseous systems.These investigations led to the development of mag netometers of unique sensitivity.More recently, very precise frequency standards have been developed using the methods of optical pumping and the knowledge gained through their application.The present work was undertaken in the context of extending our knowledge of the dynamics of optical pumping methods and of exploiting these methods for the deter mination of an interesting atomic exchange cross section.Optical pumping may be considered as a specialized technique used in conjunction with magnetic resonance phenomena.All magnetic reso nance techniques depend upon obtaining an oriented (polarized) macro scopic sample of matter, that is, matter with a net magnetic moment.In the atomic beam magnetic resonance method, this is accomplished by sort ing out, spatially, atoms whose magnetic moments have a particular ori entation with respect to a magnetic field.In nuclear or electron para magnetic resonance work in solids, liquids, or gases, the small thermal equilibrium polarization that matter possesses in a magnetic field is exploited.Optical pumping enhances this equilibrium polarization through selective optical absorption, by a gaseous atomic system, of polarized resonance radiation.Optical pumping offers the great advan tage of experimental simplicity, as compared to other magnetic resonance techniques, but suffers from severe limitations in application.Since the original suggestion by Brossel and Nastier^ and subse quent development by many others, optical pumping, in conjunction with the transmission monitoring technique of signal detection, has became a standard technique in the study of alkali metal ground states.By far the greatest amount of work in optical pumping has been concerned with alkali metal vapors.Bell, Bloom/ and others^ have considered the process of the optical pumping of the alkalis with attention to the spec tral composition of the pumping light, that is, the resonance radiation incident on the alkali vapor.Colegrove and Franken? have recently dis cussed the complication in the analyses of optical pumping signals for Q helium when the helium absorption cell is optically thick.Hobart has considered this same complication for sodium.Prediction of signals must take into account the fact that the pumping light is absorbed ap proximately exponentially in the optical pumping absorption cell.This means that the absorption coefficient, which is proportional to the al kali density, times the length of the cell is a significant parameter in determining the strength of the signal.Similar calculations of the dependence of optical pumping signals on alkali density and spectral com position of the pumping light will be presented in this work.In order to test the signal predictions> a high resolution Fabry-Perot spectrometer was constructed.This instrument can be used for two purposes : the investigation of the intensity distribution of the pumping light, and, more importantly, determinations of the alkali vapor density in the absorption cell.The desired data are curves of optical pumping signals, for a typical sodium optical pumping experiment, as a function of density.It is often necessary to know these densities in order to is limited to the accuracy to which the density is known.Since the Fabry-Perot spectrometer used to measure sodium vapor densities in conjunction with the signal strength versus density meas urements can be applied to different systems, it was decided to make a determination of the rubidium 85-rubidium 87 spin exchange cross sec tion.The reasons for this choice are discussed in detail in Chapt.IV.In brief, work on rubidium exchange offered some experimental sim plifications and rubidium has previously been studied more thoroughly than other systems.

•Jan 1, 1963•0 citations

Determination of atomic number density in MEMS vapor cells via single-pass absorption spectroscopy (SPAS)

Sumit Achar, Sinha, Shivam, M Ezhilarasan +2 more

Micro-electro-mechanical systems (MEMS)-based (chip-scale) alkali vapor cells are key components in emerging quantum technologies, where device performance critically depends on the atomic number density. Thus, it is important to have an accurate estimate of the atomic number density in MEMS-based alkali vapor cells to optimize light-matter interactions and design efficient quantum sensing systems. Here, a quantitatively validated method is presented for determining the rubidium (Rb) atomic number density in warm vapor using Single-Pass Absorption Spectroscopy (SPAS). The absolute transmission spectra are measured and modeled using the 780.24~nm and 420.29~nm transitions in Rb-filled MEMS vapor. The theoretical model employs a density-matrix formalism within the Lindblad framework and incorporates directly measurable experimental parameters, such as laser beam power, diameter, and cell temperature. The model explicitly accounts for optical pumping, Doppler broadening, and transit-time broadening effects and exhibits quantitative agreement ($> 99\%$) with experimental spectra over a broad range of temperatures (293-353~K), laser probe powers of approximately 10~$μ$W-100~$μ$W at the 780.24~nm transition and 8~$μ$W-80~$μ$W at the 420.29~nm transition, and cell lengths (2--100~mm). This method demonstrates a practical and reliable approach for determining the density of alkali vapor cells for quantum sensing, metrology, and quantum communication applications.

arXiv:2511.00526•Nov 1, 2025•1 citation

Trace of evanescent wave polarization by atomic vapor spectroscopy

Mohammad Mosleh, Maliheh Ranjbaran, Seyedeh Mehri Hamidi

Various efforts have been made to determine the polarization state of evanescent waves in different structures. The present study shows the reliability of magneto-optical spectroscopy of D1 and D2 lines of rubidium metal and polarization-dependent transitions to investigate and trace the changes in the polarization state of evanescent fields during total internal reflection over different angles. For this purpose, we design and fabricate atomic- evanescent Rb vapor cells and examine the effect of polarization changes of evanescent waves, depending on the propagation direction of evanescent waves in anisotropic rubidium vapor media under 88 mT external magnetic field by different configurations theoretically and experimentally. The results confirm the dependency of allowed [Formula: see text] transitions on the magneto optical configuration as a tool to determine changes in the polarization of evanescent waves in more complicated wave states in anisotropic media.

Scientific Reports•Nov 4, 2021•7 citations

[The Measuring Method of Atomic Polarization of Alkali Metal Vapor Based on Optical Rotation and the Analysis of the Influence Factors].

Huining Shang, Wei Quan, Yao Chen +2 more

High sensitivity measurements of inertia and magnetic field could be achieved by utilizing a category of devices, which manipulate the atomic spins in the spin-exchange-relaxation-free regime. The alkali cell which contains the alkali metal vapor is used to sense magnetic field and inertia. The atomic number density of alkali vapor and the polarization of alkali metal vapor are two of the most important parameters of the cell. They play an important role in the research on atomic spins in the spin-exchange-relaxation-free regime. Besides, optical polarization plays an important role in quantum computing and atomic physics. We propose a measurement of alkali vapor polarization and alkali number density by detecting the optical rotation in one system. This method simplifies existing experimental equipment and processes. A constant bias magnetic field is applied and the Faraday rotation angle is detected by a bunch of the probe beam to deduce alkali-metal density. Then the magnetic field is closed and a bunch of the pump laser is utilized to polarize alkali-metal. Again, the probe beam is utilized to obtain the polarization of alkali metal. The alkali density obtained at first is used to deduce the polarization. This paper applies a numerical method to analyze the Faraday rotation and the polarization rotation. According to the numerical method, the optimal wavelength for the experiment is given. Finally, the fluctuation of magnetic field and wavelength on signal analysis are analyzed.

•Feb 1, 2016•2 citations
We describe a method for determining the number density of the alkali metal vapor by use of an evanescent wave in a single total internal reflection. The method is simple to use, and it has the following useful features: It is most suitable for determining the number density of dense (>1013 cm-3) alkali metal vapor and it permits the measurement of the alkali metal vapor number density in the vicinity (∼10-5 cm) of cell surfaces. Using this method, we measured the number density of Rb metal vapor in the vicinity (∼10-5 cm) of the cell wall in cells that contain only Rb metal and no buffer gas; we found that there is no systematic difference between the Rb number density near the surface and that in the bulk.
We have developed a simple heuristic method for determining the polarization of an optically pumped alkali-metal vapor. A linearly polarized probe beam traverses a vapor cell perpendicular to the pump-beam propagation direction, and the transmitted beam intensity is monitored for orthogonal linear polarizations. As the probe beam is scanned in frequency across the D1{D}_{1}D1​ transition, its linear-polarization-dependent transmission can be used as a measure of the atomic orientation of the vapor. We analyze these transmission differences and their dependence on the alkali-metal number density in the vapor.
III-8.Comparison of optical pumping signals for two spherical cells with different buffer gas pressures as a function of density times diameter of cell for equal D2/D1.60 IV-1.Energy level diagram showing hyperfine structure of Rb Di line.Units are 10*3 cm-1.67 IV-2.Equivalent circuit for rate equations involving ex change polarization.73 IV-3.Diagram of optical system for optical pumping of Rb. 83 IV-4.Block diagram of Rb optical pumping signal detection system.85 IV-5.Block diagram of Rb light detection system.90 IV-6.Typical photograph from which relaxation time measure ments are made..Time increases from left to right.Scale is 1 millisecond per division.92 IV-7.Lines determined from measurements on time dependence of Rb87 signals at 50°C for the two different light in tensities.Scatter of points is too small to be notice able on graph.93 A-1.Spectral profile of D1 radiation from a Varian spectral lamp containing natural Rb.Ill A-2.Spectral profile of Di radiation from a Varian spectral lamp containing Rb87.112 A-3-Spectral profile of Di radiation from a Varian spectral lamp containing Rb87 after filtering by an Rb85 absorption cell.113 vi CHAPTER I2 atomic ground states and the parameters of various relaxation processes of gaseous systems.These investigations led to the development of mag netometers of unique sensitivity.More recently, very precise frequency standards have been developed using the methods of optical pumping and the knowledge gained through their application.The present work was undertaken in the context of extending our knowledge of the dynamics of optical pumping methods and of exploiting these methods for the deter mination of an interesting atomic exchange cross section.Optical pumping may be considered as a specialized technique used in conjunction with magnetic resonance phenomena.All magnetic reso nance techniques depend upon obtaining an oriented (polarized) macro scopic sample of matter, that is, matter with a net magnetic moment.In the atomic beam magnetic resonance method, this is accomplished by sort ing out, spatially, atoms whose magnetic moments have a particular ori entation with respect to a magnetic field.In nuclear or electron para magnetic resonance work in solids, liquids, or gases, the small thermal equilibrium polarization that matter possesses in a magnetic field is exploited.Optical pumping enhances this equilibrium polarization through selective optical absorption, by a gaseous atomic system, of polarized resonance radiation.Optical pumping offers the great advan tage of experimental simplicity, as compared to other magnetic resonance techniques, but suffers from severe limitations in application.Since the original suggestion by Brossel and Nastier^ and subse quent development by many others, optical pumping, in conjunction with the transmission monitoring technique of signal detection, has became a standard technique in the study of alkali metal ground states.By far the greatest amount of work in optical pumping has been concerned with alkali metal vapors.Bell, Bloom/ and others^ have considered the process of the optical pumping of the alkalis with attention to the spec tral composition of the pumping light, that is, the resonance radiation incident on the alkali vapor.Colegrove and Franken? have recently dis cussed the complication in the analyses of optical pumping signals for Q helium when the helium absorption cell is optically thick.Hobart has considered this same complication for sodium.Prediction of signals must take into account the fact that the pumping light is absorbed ap proximately exponentially in the optical pumping absorption cell.This means that the absorption coefficient, which is proportional to the al kali density, times the length of the cell is a significant parameter in determining the strength of the signal.Similar calculations of the dependence of optical pumping signals on alkali density and spectral com position of the pumping light will be presented in this work.In order to test the signal predictions> a high resolution Fabry-Perot spectrometer was constructed.This instrument can be used for two purposes : the investigation of the intensity distribution of the pumping light, and, more importantly, determinations of the alkali vapor density in the absorption cell.The desired data are curves of optical pumping signals, for a typical sodium optical pumping experiment, as a function of density.It is often necessary to know these densities in order to is limited to the accuracy to which the density is known.Since the Fabry-Perot spectrometer used to measure sodium vapor densities in conjunction with the signal strength versus density meas urements can be applied to different systems, it was decided to make a determination of the rubidium 85-rubidium 87 spin exchange cross sec tion.The reasons for this choice are discussed in detail in Chapt.IV.In brief, work on rubidium exchange offered some experimental sim plifications and rubidium has previously been studied more thoroughly than other systems.
Micro-electro-mechanical systems (MEMS)-based (chip-scale) alkali vapor cells are key components in emerging quantum technologies, where device performance critically depends on the atomic number density. Thus, it is important to have an accurate estimate of the atomic number density in MEMS-based alkali vapor cells to optimize light-matter interactions and design efficient quantum sensing systems. Here, a quantitatively validated method is presented for determining the rubidium (Rb) atomic number density in warm vapor using Single-Pass Absorption Spectroscopy (SPAS). The absolute transmission spectra are measured and modeled using the 780.24~nm and 420.29~nm transitions in Rb-filled MEMS vapor. The theoretical model employs a density-matrix formalism within the Lindblad framework and incorporates directly measurable experimental parameters, such as laser beam power, diameter, and cell temperature. The model explicitly accounts for optical pumping, Doppler broadening, and transit-time broadening effects and exhibits quantitative agreement (>99%> 99\%>99%) with experimental spectra over a broad range of temperatures (293-353~K), laser probe powers of approximately 10~μμμW-100~μμμW at the 780.24~nm transition and 8~μμμW-80~μμμW at the 420.29~nm transition, and cell lengths (2--100~mm). This method demonstrates a practical and reliable approach for determining the density of alkali vapor cells for quantum sensing, metrology, and quantum communication applications.
Various efforts have been made to determine the polarization state of evanescent waves in different structures. The present study shows the reliability of magneto-optical spectroscopy of D1 and D2 lines of rubidium metal and polarization-dependent transitions to investigate and trace the changes in the polarization state of evanescent fields during total internal reflection over different angles. For this purpose, we design and fabricate atomic- evanescent Rb vapor cells and examine the effect of polarization changes of evanescent waves, depending on the propagation direction of evanescent waves in anisotropic rubidium vapor media under 88 mT external magnetic field by different configurations theoretically and experimentally. The results confirm the dependency of allowed [Formula: see text] transitions on the magneto optical configuration as a tool to determine changes in the polarization of evanescent waves in more complicated wave states in anisotropic media.
High sensitivity measurements of inertia and magnetic field could be achieved by utilizing a category of devices, which manipulate the atomic spins in the spin-exchange-relaxation-free regime. The alkali cell which contains the alkali metal vapor is used to sense magnetic field and inertia. The atomic number density of alkali vapor and the polarization of alkali metal vapor are two of the most important parameters of the cell. They play an important role in the research on atomic spins in the spin-exchange-relaxation-free regime. Besides, optical polarization plays an important role in quantum computing and atomic physics. We propose a measurement of alkali vapor polarization and alkali number density by detecting the optical rotation in one system. This method simplifies existing experimental equipment and processes. A constant bias magnetic field is applied and the Faraday rotation angle is detected by a bunch of the probe beam to deduce alkali-metal density. Then the magnetic field is closed and a bunch of the pump laser is utilized to polarize alkali-metal. Again, the probe beam is utilized to obtain the polarization of alkali metal. The alkali density obtained at first is used to deduce the polarization. This paper applies a numerical method to analyze the Faraday rotation and the polarization rotation. According to the numerical method, the optimal wavelength for the experiment is given. Finally, the fluctuation of magnetic field and wavelength on signal analysis are analyzed.