Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE

High-speed optical recording with rare-earth-doped hole-burning materials

Ravinder Kachru, Xiao A. Shen

Published Jan 15, 1996• 0 citations
Publisher

Abstract

We are developing a high density, high speed optical memory, using rare-earth doped hole- burning materials. These materials are theoretically capable of achieving storage densities of 1000 Gigabits/cm3 at input/output (I/O) rates of several gigabits/sec. One remarkable attribute of this storage concept is that both the temporal and spatial information encoded on a laser beam can be stored. Because both the temporal and spatial information can be stored, digital data can be recorded serially as a data or packet stream as well as holographically using the page format. During the past year we have achieved a breakthrough in demonstrating random access holographic data storage at high frame rates. Five hundred holograms were stored and retrieved with very good fidelity at 30 Hz (video rate). Each holographic image with 512 multiplied by 488 pixels could be randomly accessed during the storage and retrieval process. This frame rate is the highest demonstrated frame rate for any optical technique. This breakthrough was achieved through the invention of a memory architecture that allows multiple holographic frames to be stored without any mechanical beam scanning. In this new architecture multiplexing of 500 holograms was achieved by stepping the laser frequency over a range covered by high speed acousto-optic modulators (AOM).

DOI
10.1117/12.230053

Related papers

High-Speed Holographic Recording of 500 Images in Hole Burning Rare-Earth Doped Crystals

Ravinder Kachru, Xiao A. Shen

One of the unique and perhaps the most attractive features of an optical memory is its ability to store and retrieve information in a bit-parallel format.1-3 Recently, we have proposed a new scheme for parallel data storage in TDOM.4,5 This scheme was proven to be practical and can be implemented with existing technologies. In a proof-of-principle experiment, four wavelength-multiplexed single-page volume spectral holograms, generated with black-and-white transparencies, were successfully stored in a single spatial location at a speed of approximately 23 μs/frame. The experimental results project system's input/output bandwidth to exceed 40 Gbps, two orders of magnitude faster than a semiconductor cache memory.

Topical Meeting on Holography•Jan 1, 1996•0 citations

High-speed, high-density, coherent time-domain optical memory. Final report, 1 September 1990-31 August 1993

Ravinder Kachru, Xiao A. Shen

The objective of this research was to quantitatively evaluate the concept of time-domain optical memory (TDOM) using the hole-burning mechanism. The TDOM concept offers both high speed and high memory density. The advantage of TDOM over traditional semiconductor memory is its inherent parallelism, which allows data to be stored and retrieved from the memory at much higher speed. The practical success of the proposed memory, therefore, depends critically on-among other issues-the storage, retrieval, and processing of images. In addition, new data storage techniques are needed to implement a practical memory. The last three years of this research program have focused on (1) development of new phase modulation techniques to enhance the storage, retrieval, and integrity of the stored information; (2) experimental studies of image storage and phase conjugate retrieval; (3) Image processing; and (4) practical holographic storage of images by using the hybrid time-frequency approach. Specifically, SRI demonstrated data encryption by phase modulating the read and write pulses. Image correlation and convolution was demonstrated and its implication for pattern recognition examined. Finally, this laboratory demonstrated high-fidelity random access and retrieval using holographic storage in Pr3+: YA103 with a single-frequency ring laser. These experiments have clearly demonstrated the practical viability ofmore » TDOM with existing technology. In the next stage of the research, the performance Issues such as bit-error-rates, signal-to-noise ratios, and laser stability need to be addressed. Stimulated photon echoes, Optical memory, Image processing, Pattern recognition, Phase conjugation.« less

•Nov 1, 1993•0 citations

Random-access stimulated-echo optical cache memory

Ravinder Kachru, Yu Bai, Xiao A. Shen +1 more

We describe a new approach to develop a high-speed, high-density random access cache memory. This new technique is based on a novel approach using, in essence, a hybrid of the time domain stimulated echo (SE) concept and the frequency domain scheme. It has been demonstrated that the rare-earth doped crystals, can at low temperatures store large amounts of information for up to 24 hours using SE. The basic approach we have developed is the partitioning of the absorption frequency domain into smaller bins, so that each frequency bin stores a smaller portion of information independently. The bins are distinguishable by their different absorption frequencies and they are accessed by changing the laser frequency (color). However, information is still stored and retrieved using the time-domain pulse sequency used in SE. Specifically, with the laser frequency set at the particular absorption of a frequency bin, the laser is externally modulated by an acousto-optic modulator to produce amplitude modulated pulses representing the digital data, the write pulse, and the read pulse, during the write and retrieve operation, respectively. The advantages of this approach are that memory can be stored in space, time, and frequency domain, allowing us to tailor a flexible memory architecture to match those of the computational processor.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Apr 1, 1992•2 citations

Time-Domain Holographic Digital Memory

Xiao A. Shen, An-Dien Nguyen, John Weir Perry +2 more

An optical storage technique based on time-domain holography for the rapid recording and readout of page-formatted digital data is demonstrated. Storage of 356 kilobits of data was achieved at a single spatial location in a rare-earth–doped crystal. The digital data were recorded and accurately retrieved at a peak rate of 300 megabits per second without the use of error-correcting codes. The system's raw bit error rate is about 10 − 7 . This low bit error rate was achieved by a detection scheme for extraction of binary data. These results have implications for dynamic optical memory.

Science•Oct 3, 1997•56 citations

Rare-earth-doped materials with application to optical signal processing, quantum information science, and medical imaging technology

R. L. Cone, Charles W. Thiel, Yazhou Sun +2 more

Unique spectroscopic properties of isolated rare earth ions in solids offer optical linewidths rivaling those of trapped single atoms and enable a variety of recent applications. We design rare-earth-doped crystals, ceramics, and fibers with persistent or transient "spectral hole" recording properties for applications including high-bandwidth optical signal processing where light and our solids replace the high-bandwidth portion of the electronics; quantum cryptography and information science including the goal of storage and recall of single photons; and medical imaging technology for the 700-900 nm therapeutic window. Ease of optically manipulating rare-earth ions in solids enables capturing complex spectral information in 105 to 108 frequency bins. Combining spatial holography and spectral hole burning provides a capability for processing high-bandwidth RF and optical signals with sub-MHz spectral resolution and bandwidths of tens to hundreds of GHz for applications including range-Doppler radar and high bandwidth RF spectral analysis. Simply stated, one can think of these crystals as holographic recording media capable of distinguishing up to 108 different colors. Ultra-narrow spectral holes also serve as a vibration-insensitive sub-kHz frequency reference for laser frequency stabilization to a part in 1013 over tens of milliseconds. The unusual properties and applications of spectral hole burning of rare earth ions in optical materials are reviewed. Experimental results on the promising Tm3+:LiNbO3 material system are presented and discussed for medical imaging applications. Finally, a new application of these materials as dynamic optical filters for laser noise suppression is discussed along with experimental demonstrations and theoretical modeling of the process.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Feb 9, 2012•17 citations

High-Speed Storage of Wavelength-Multiplexed Volume Spectral Holograms

Xiao A. Shen, Yu Bai, Ravinder Kachru

One of the most attractive features of an optical memory is its ability to write and read data in a bit-parallel format, giving rise to theoretically very high (in excess of 1 Gbps) data transfer rates. However, such a potential has not been demonstrated experimentally because of various inherent technical difficulties associated with existing optical storage techniques. In a photorefractive or a persistent spectral hole-burning (PSHB) memory, for example, the time required to record one page varies from a fraction of a second to several seconds.1-3 For a page containing 1000 × 1000 bits of data, it translates to a bandwidth of approximately 1 Mbps, substantially slower than any existing semiconductor memories.

Optical Computing•Jan 1, 1995•0 citations
We are developing a high density, high speed optical memory, using rare-earth doped hole- burning materials. These materials are theoretically capable of achieving storage densities of 1000 Gigabits/cm3 at input/output (I/O) rates of several gigabits/sec. One remarkable attribute of this storage concept is that both the temporal and spatial information encoded on a laser beam can be stored. Because both the temporal and spatial information can be stored, digital data can be recorded serially as a data or packet stream as well as holographically using the page format. During the past year we have achieved a breakthrough in demonstrating random access holographic data storage at high frame rates. Five hundred holograms were stored and retrieved with very good fidelity at 30 Hz (video rate). Each holographic image with 512 multiplied by 488 pixels could be randomly accessed during the storage and retrieval process. This frame rate is the highest demonstrated frame rate for any optical technique. This breakthrough was achieved through the invention of a memory architecture that allows multiple holographic frames to be stored without any mechanical beam scanning. In this new architecture multiplexing of 500 holograms was achieved by stepping the laser frequency over a range covered by high speed acousto-optic modulators (AOM).
One of the unique and perhaps the most attractive features of an optical memory is its ability to store and retrieve information in a bit-parallel format.1-3 Recently, we have proposed a new scheme for parallel data storage in TDOM.4,5 This scheme was proven to be practical and can be implemented with existing technologies. In a proof-of-principle experiment, four wavelength-multiplexed single-page volume spectral holograms, generated with black-and-white transparencies, were successfully stored in a single spatial location at a speed of approximately 23 μs/frame. The experimental results project system's input/output bandwidth to exceed 40 Gbps, two orders of magnitude faster than a semiconductor cache memory.
The objective of this research was to quantitatively evaluate the concept of time-domain optical memory (TDOM) using the hole-burning mechanism. The TDOM concept offers both high speed and high memory density. The advantage of TDOM over traditional semiconductor memory is its inherent parallelism, which allows data to be stored and retrieved from the memory at much higher speed. The practical success of the proposed memory, therefore, depends critically on-among other issues-the storage, retrieval, and processing of images. In addition, new data storage techniques are needed to implement a practical memory. The last three years of this research program have focused on (1) development of new phase modulation techniques to enhance the storage, retrieval, and integrity of the stored information; (2) experimental studies of image storage and phase conjugate retrieval; (3) Image processing; and (4) practical holographic storage of images by using the hybrid time-frequency approach. Specifically, SRI demonstrated data encryption by phase modulating the read and write pulses. Image correlation and convolution was demonstrated and its implication for pattern recognition examined. Finally, this laboratory demonstrated high-fidelity random access and retrieval using holographic storage in Pr3+: YA103 with a single-frequency ring laser. These experiments have clearly demonstrated the practical viability ofmore » TDOM with existing technology. In the next stage of the research, the performance Issues such as bit-error-rates, signal-to-noise ratios, and laser stability need to be addressed. Stimulated photon echoes, Optical memory, Image processing, Pattern recognition, Phase conjugation.« less
We describe a new approach to develop a high-speed, high-density random access cache memory. This new technique is based on a novel approach using, in essence, a hybrid of the time domain stimulated echo (SE) concept and the frequency domain scheme. It has been demonstrated that the rare-earth doped crystals, can at low temperatures store large amounts of information for up to 24 hours using SE. The basic approach we have developed is the partitioning of the absorption frequency domain into smaller bins, so that each frequency bin stores a smaller portion of information independently. The bins are distinguishable by their different absorption frequencies and they are accessed by changing the laser frequency (color). However, information is still stored and retrieved using the time-domain pulse sequency used in SE. Specifically, with the laser frequency set at the particular absorption of a frequency bin, the laser is externally modulated by an acousto-optic modulator to produce amplitude modulated pulses representing the digital data, the write pulse, and the read pulse, during the write and retrieve operation, respectively. The advantages of this approach are that memory can be stored in space, time, and frequency domain, allowing us to tailor a flexible memory architecture to match those of the computational processor.
An optical storage technique based on time-domain holography for the rapid recording and readout of page-formatted digital data is demonstrated. Storage of 356 kilobits of data was achieved at a single spatial location in a rare-earth–doped crystal. The digital data were recorded and accurately retrieved at a peak rate of 300 megabits per second without the use of error-correcting codes. The system's raw bit error rate is about 10 − 7 . This low bit error rate was achieved by a detection scheme for extraction of binary data. These results have implications for dynamic optical memory.
Unique spectroscopic properties of isolated rare earth ions in solids offer optical linewidths rivaling those of trapped single atoms and enable a variety of recent applications. We design rare-earth-doped crystals, ceramics, and fibers with persistent or transient "spectral hole" recording properties for applications including high-bandwidth optical signal processing where light and our solids replace the high-bandwidth portion of the electronics; quantum cryptography and information science including the goal of storage and recall of single photons; and medical imaging technology for the 700-900 nm therapeutic window. Ease of optically manipulating rare-earth ions in solids enables capturing complex spectral information in 105 to 108 frequency bins. Combining spatial holography and spectral hole burning provides a capability for processing high-bandwidth RF and optical signals with sub-MHz spectral resolution and bandwidths of tens to hundreds of GHz for applications including range-Doppler radar and high bandwidth RF spectral analysis. Simply stated, one can think of these crystals as holographic recording media capable of distinguishing up to 108 different colors. Ultra-narrow spectral holes also serve as a vibration-insensitive sub-kHz frequency reference for laser frequency stabilization to a part in 1013 over tens of milliseconds. The unusual properties and applications of spectral hole burning of rare earth ions in optical materials are reviewed. Experimental results on the promising Tm3+:LiNbO3 material system are presented and discussed for medical imaging applications. Finally, a new application of these materials as dynamic optical filters for laser noise suppression is discussed along with experimental demonstrations and theoretical modeling of the process.
One of the most attractive features of an optical memory is its ability to write and read data in a bit-parallel format, giving rise to theoretically very high (in excess of 1 Gbps) data transfer rates. However, such a potential has not been demonstrated experimentally because of various inherent technical difficulties associated with existing optical storage techniques. In a photorefractive or a persistent spectral hole-burning (PSHB) memory, for example, the time required to record one page varies from a fraction of a second to several seconds.1-3 For a page containing 1000 × 1000 bits of data, it translates to a bandwidth of approximately 1 Mbps, substantially slower than any existing semiconductor memories.