Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Physica status solidi. C, Conferences and critical reviews/Physica status solidi. C, Current topics in solid state physics

Hard magnetic FePt films for atom chips

Yutao T. Xing, A. Eljaouhari, I. Barb, R. Gerritsma, R. J. C. Spreeuw, J. B. Goedkoop

Published Dec 1, 2004• 5 citations
Publisher

Abstract

In this work FePt hard magnetic films were prepared with a thickness of 250 and 500 nm for making atom chips. We choose FePt because it has high magnetocrystalline anisotropy as well as high saturation magnetization. The FePt films were deposited at room temperature and at 350 °C using Molecular Beam Epitaxy on a Si substrate. After post annealing, the samples have high in-plane and out-of-plane coercivity (Hc = 8.0 kOe and 8.34 kOe, respectively) and remanent magnetization (Mr/Ms = 0.90, 0.93, respectively). Whereas the samples deposited at room temperature have many cracks on the surface, the samples deposited at 350 °C are free of cracks and their surfaces are mirror-like. The magnetized sample keeps the magnetization after baking in vacuum at 170 °C for 24 hours. A calculation shows that such samples can be used to trap cold atoms after lithographic patterning. (© 2004 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)

DOI
10.1002/pssc.200405538

Related papers

Deposition and patterning of magnetic atom trap lattices in FePt films with periods down to 200 nm

Arthur La Rooij, Sébastien Couet, Marco C. van der Krogt +3 more

We report on the epitaxial growth and the characterization of thin FePt films and the subsequent patterning of magnetic lattice structures. These structures can be used to trap ultracold atoms for quantum simulation experiments. We use molecular beam epitaxy to deposit monocrystalline FePt films with a thickness of 50 nm. The films are characterized with X-ray scattering and Mössbauer spectroscopy to determine the long range order parameter and the hard magnetic axes. A high monocrystalline fraction was measured as well as a strong remanent magnetization of M = 900 kA/m and coercivity of 0.4 T. Using electron beam lithography and argon ion milling, we create lattice patterns with a period down to 200 nm, and a resolution of 30 nm. The resulting lattices are imaged in a scanning electron microscope in the cross-section created by a focused ion beam. A lattice with continuously varying lattice constant ranging from 5 μm down to 250 nm has been created to show the wide range of length scales that can now be created with this technique.

arXiv:1805.00376•Journal of Applied Physics•Jul 23, 2018•5 citations

Sub-micron period lattice structures of magnetic microtraps for ultracold atoms on an atom chip

I. Herrera, Y. Wang, Pierrette Michaux +8 more

Abstract We report on the design, fabrication and characterization of magnetic nanostructures to create a lattice of magnetic traps with sub-micron period for trapping ultracold atoms. These magnetic nanostructures were fabricated by patterning a Co/Pd multilayered magnetic film grown on a silicon substrate using high precision e-beam lithography and reactive ion etching. The Co/Pd film was chosen for its small grain size and high remanent magnetization and coercivity. The fabricated structures are designed to magnetically trap 87 Rb atoms above the surface of the magnetic film with one-dimensional and two-dimensional (triangular and square) lattice geometries and sub-micron period. Such magnetic lattices can be used for quantum tunneling and quantum simulation experiments, including using geometries and periods that may be inaccessible with optical lattices.

arXiv:1410.0528•Journal of Physics D Applied Physics•Feb 24, 2015•22 citations

Atom chips: Fabrication and thermal properties

S. Groth, P. Krüger, S. Wildermuth +5 more

Neutral atoms can be trapped and manipulated with surface mounted microscopic current carrying and charged structures. We present a lithographic fabrication process for such atom chips based on evaporated metal films. The size limit of this process is below 1 μm. At room temperature, thin wires can carry current densities of more than 107A∕cm2 and voltages of more than 500 V. Extensive test measurements for different substrates and metal thicknesses (up to 5 μm) are compared to models for the heating characteristics of the microscopic wires. Among the materials tested, we find that Si is the best suited substrate for atom chips.

arXiv:cond-mat/0404141•Applied Physics Letters•Oct 4, 2004•107 citations

Magnetic atom optics: mirrors, guides, traps, and chips for atoms

Edward A. Hinds, Ifan G. Hughes

For the last decade it has been possible to cool atoms to microkelvin temperatures (~1 cm s -1 ) using a variety of optical techniques. Light beams provide the very strong frictional forces required to slow atoms from room temperature (~500 m s -1 ). However, once the atoms are cold, the relatively weak conservative forces of static electric and magnetic fields play an important role. In our group we have been studying the interaction of cold rubidium atoms with periodically magnetized data storage media. Here we review the underlying principles of the forces acting on atoms above a suitably magnetized substrate or near current-carrying wires. We also summarize the status of experiments. These structures can be used as smooth or corrugated reflectors for controlling the trajectories of cold atoms. Alternatively, they may be used to confine atoms to a plane, a line, or a dot and in some cases to reach the quantum limit of confinement. Atoms levitated above a magnetized surface can be guided electrostatically by wires deposited on the surface. The flow and interaction of atoms in such a structure may form the basis of a new technology, `integrated atom optics' which might ultimately be capable of realizing a quantum computer.

Journal of Physics D Applied Physics•Sep 1, 1999•244 citations

Perpendicularly magnetized, grooved GdTbFeCo microstructures for atom optics

James Wang, S. Whitlock, F. Scharnberg +4 more

Periodically grooved, micron-scale structures incorporating perpendicularly magnetized Gd10Tb6Fe80Co4 magneto-optical films have been fabricated and characterized. Such structures produce a magnetic field having flat equipotentials and whose magnitude decays exponentially with distance above the surface, making them attractive for manipulating ultracold atoms in atom optics. The GdTbFeCo films have been deposited on a Cr underlayer on a silicon (100) wafer and on a grooved silicon microstructure using DC magnetron sputtering. The films are found to have excellent magnetic properties for magnetic atom optics applications, including high remanent magnetization, high coercivity and excellent homogeneity.

Journal of Physics D Applied Physics•Nov 7, 2005•25 citations

An atom chip for the manipulation of ultracold atoms

Owen Cherry, J. D. Carter, J. D. D. Martin

We have fabricated an atom chip that magnetically traps laser cooled 87Rb by generating high magnetic-field gradients using micrometre scale current-carrying wires. The wires are fabricated on a Si wafer (with a 40 nm SiO2 layer) using 1.2 μm thick Au and a 20 nm thick adhesion layer, and are patterned with lift-off photolithography. We characterize the number and temperature of the cold atoms trapped by the chip.

Canadian Journal of Physics•Jun 1, 2009•7 citations
In this work FePt hard magnetic films were prepared with a thickness of 250 and 500 nm for making atom chips. We choose FePt because it has high magnetocrystalline anisotropy as well as high saturation magnetization. The FePt films were deposited at room temperature and at 350 °C using Molecular Beam Epitaxy on a Si substrate. After post annealing, the samples have high in-plane and out-of-plane coercivity (Hc = 8.0 kOe and 8.34 kOe, respectively) and remanent magnetization (Mr/Ms = 0.90, 0.93, respectively). Whereas the samples deposited at room temperature have many cracks on the surface, the samples deposited at 350 °C are free of cracks and their surfaces are mirror-like. The magnetized sample keeps the magnetization after baking in vacuum at 170 °C for 24 hours. A calculation shows that such samples can be used to trap cold atoms after lithographic patterning. (© 2004 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)
We report on the epitaxial growth and the characterization of thin FePt films and the subsequent patterning of magnetic lattice structures. These structures can be used to trap ultracold atoms for quantum simulation experiments. We use molecular beam epitaxy to deposit monocrystalline FePt films with a thickness of 50 nm. The films are characterized with X-ray scattering and Mössbauer spectroscopy to determine the long range order parameter and the hard magnetic axes. A high monocrystalline fraction was measured as well as a strong remanent magnetization of M = 900 kA/m and coercivity of 0.4 T. Using electron beam lithography and argon ion milling, we create lattice patterns with a period down to 200 nm, and a resolution of 30 nm. The resulting lattices are imaged in a scanning electron microscope in the cross-section created by a focused ion beam. A lattice with continuously varying lattice constant ranging from 5 μm down to 250 nm has been created to show the wide range of length scales that can now be created with this technique.
Abstract We report on the design, fabrication and characterization of magnetic nanostructures to create a lattice of magnetic traps with sub-micron period for trapping ultracold atoms. These magnetic nanostructures were fabricated by patterning a Co/Pd multilayered magnetic film grown on a silicon substrate using high precision e-beam lithography and reactive ion etching. The Co/Pd film was chosen for its small grain size and high remanent magnetization and coercivity. The fabricated structures are designed to magnetically trap 87 Rb atoms above the surface of the magnetic film with one-dimensional and two-dimensional (triangular and square) lattice geometries and sub-micron period. Such magnetic lattices can be used for quantum tunneling and quantum simulation experiments, including using geometries and periods that may be inaccessible with optical lattices.
Neutral atoms can be trapped and manipulated with surface mounted microscopic current carrying and charged structures. We present a lithographic fabrication process for such atom chips based on evaporated metal films. The size limit of this process is below 1 μm. At room temperature, thin wires can carry current densities of more than 107A∕cm2 and voltages of more than 500 V. Extensive test measurements for different substrates and metal thicknesses (up to 5 μm) are compared to models for the heating characteristics of the microscopic wires. Among the materials tested, we find that Si is the best suited substrate for atom chips.
For the last decade it has been possible to cool atoms to microkelvin temperatures (~1 cm s -1 ) using a variety of optical techniques. Light beams provide the very strong frictional forces required to slow atoms from room temperature (~500 m s -1 ). However, once the atoms are cold, the relatively weak conservative forces of static electric and magnetic fields play an important role. In our group we have been studying the interaction of cold rubidium atoms with periodically magnetized data storage media. Here we review the underlying principles of the forces acting on atoms above a suitably magnetized substrate or near current-carrying wires. We also summarize the status of experiments. These structures can be used as smooth or corrugated reflectors for controlling the trajectories of cold atoms. Alternatively, they may be used to confine atoms to a plane, a line, or a dot and in some cases to reach the quantum limit of confinement. Atoms levitated above a magnetized surface can be guided electrostatically by wires deposited on the surface. The flow and interaction of atoms in such a structure may form the basis of a new technology, `integrated atom optics' which might ultimately be capable of realizing a quantum computer.
Periodically grooved, micron-scale structures incorporating perpendicularly magnetized Gd10Tb6Fe80Co4 magneto-optical films have been fabricated and characterized. Such structures produce a magnetic field having flat equipotentials and whose magnitude decays exponentially with distance above the surface, making them attractive for manipulating ultracold atoms in atom optics. The GdTbFeCo films have been deposited on a Cr underlayer on a silicon (100) wafer and on a grooved silicon microstructure using DC magnetron sputtering. The films are found to have excellent magnetic properties for magnetic atom optics applications, including high remanent magnetization, high coercivity and excellent homogeneity.