Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1805.00376 · Journal of Applied Physics

Deposition and patterning of magnetic atom trap lattices in FePt films with periods down to 200 nm

Arthur La Rooij, Sébastien Couet, Marco C. van der Krogt, A. Vantomme, K. Temst, R. J. C. Spreeuw

Published Jul 23, 2018• 5 citations
arXivHTMLPDF

Abstract

We report on the epitaxial growth and the characterization of thin FePt films and the subsequent patterning of magnetic lattice structures. These structures can be used to trap ultracold atoms for quantum simulation experiments. We use molecular beam epitaxy to deposit monocrystalline FePt films with a thickness of 50 nm. The films are characterized with X-ray scattering and Mössbauer spectroscopy to determine the long range order parameter and the hard magnetic axes. A high monocrystalline fraction was measured as well as a strong remanent magnetization of M = 900 kA/m and coercivity of 0.4 T. Using electron beam lithography and argon ion milling, we create lattice patterns with a period down to 200 nm, and a resolution of 30 nm. The resulting lattices are imaged in a scanning electron microscope in the cross-section created by a focused ion beam. A lattice with continuously varying lattice constant ranging from 5 μm down to 250 nm has been created to show the wide range of length scales that can now be created with this technique.

DOI
10.1063/1.5038165

Related papers

Hard magnetic FePt films for atom chips

Yutao T. Xing, A. Eljaouhari, I. Barb +3 more

In this work FePt hard magnetic films were prepared with a thickness of 250 and 500 nm for making atom chips. We choose FePt because it has high magnetocrystalline anisotropy as well as high saturation magnetization. The FePt films were deposited at room temperature and at 350 °C using Molecular Beam Epitaxy on a Si substrate. After post annealing, the samples have high in-plane and out-of-plane coercivity (Hc = 8.0 kOe and 8.34 kOe, respectively) and remanent magnetization (Mr/Ms = 0.90, 0.93, respectively). Whereas the samples deposited at room temperature have many cracks on the surface, the samples deposited at 350 °C are free of cracks and their surfaces are mirror-like. The magnetized sample keeps the magnetization after baking in vacuum at 170 °C for 24 hours. A calculation shows that such samples can be used to trap cold atoms after lithographic patterning. (© 2004 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)

Physica status solidi. C, Conferences and critical reviews/Physica status solidi. C, Current topics in solid state physics•Dec 1, 2004•5 citations

Sub-micron period lattice structures of magnetic microtraps for ultracold atoms on an atom chip

I. Herrera, Y. Wang, Pierrette Michaux +8 more

Abstract We report on the design, fabrication and characterization of magnetic nanostructures to create a lattice of magnetic traps with sub-micron period for trapping ultracold atoms. These magnetic nanostructures were fabricated by patterning a Co/Pd multilayered magnetic film grown on a silicon substrate using high precision e-beam lithography and reactive ion etching. The Co/Pd film was chosen for its small grain size and high remanent magnetization and coercivity. The fabricated structures are designed to magnetically trap 87 Rb atoms above the surface of the magnetic film with one-dimensional and two-dimensional (triangular and square) lattice geometries and sub-micron period. Such magnetic lattices can be used for quantum tunneling and quantum simulation experiments, including using geometries and periods that may be inaccessible with optical lattices.

arXiv:1410.0528•Journal of Physics D Applied Physics•Feb 24, 2015•22 citations

Magnetic-film atom chip with 10 μm period lattices of microtraps for quantum information science with Rydberg atoms

Vanessa Y. F. Leung, D. R. M. Pijn, H. Schlatter +11 more

We describe the fabrication and construction of a setup for creating lattices of magnetic microtraps for ultracold atoms on an atom chip. The lattice is defined by lithographic patterning of a permanent magnetic film. Patterned magnetic-film atom chips enable a large variety of trapping geometries over a wide range of length scales. We demonstrate an atom chip with a lattice constant of 10 μm, suitable for experiments in quantum information science employing the interaction between atoms in highly excited Rydberg energy levels. The active trapping region contains lattice regions with square and hexagonal symmetry, with the two regions joined at an interface. A structure of macroscopic wires, cutout of a silver foil, was mounted under the atom chip in order to load ultracold (87)Rb atoms into the microtraps. We demonstrate loading of atoms into the square and hexagonal lattice sections simultaneously and show resolved imaging of individual lattice sites. Magnetic-film lattices on atom chips provide a versatile platform for experiments with ultracold atoms, in particular for quantum information science and quantum simulation.

arXiv:1311.4512•Review of Scientific Instruments•May 1, 2014•51 citations

Lattice of microtraps for ultracold atoms based on patterned magnetic films

R. Gerritsma, S. Whitlock, T. Fernholz +5 more

We have realized a two-dimensional permanent magnetic lattice of Ioffe-Pritchard microtraps for ultracold atoms. The lattice is formed by a single $300\text{\ensuremath{-}}\mathrm{nm}$ magnetized layer of FePt, patterned using optical lithography. Our magnetic lattice consists of more than 15 000 tightly confining microtraps with a density of $1250\phantom{\rule{0.3em}{0ex}}\text{traps}∕{\mathrm{mm}}^{2}$. Simple analytical approximations for the magnetic fields produced by the lattice are used to derive relevant trap parameters. We load ultracold atoms into at least 30 lattice sites at a distance of approximately $10\phantom{\rule{0.3em}{0ex}}\ensuremath{\mu}\mathrm{m}$ from the film surface. The present result is an important first step toward quantum information processing with neutral atoms in magnetic lattice potentials.

arXiv:0706.1170•Physical Review A•Sep 19, 2007•59 citations

Designs of magnetic atom-trap lattices for quantum simulation experiments

Arthur La Rooij, H. B. van Linden van den Heuvell, R. J. C. Spreeuw

We have designed and realized magnetic trapping geometries for ultracold atoms based on permanent magnetic films. Magnetic chip based experiments give a high level of control over trap barriers and geometric boundaries in a compact experimental setup. These structures can be used to study quantum spin physics in a wide range of energies and length scales. By introducing defects into a triangular lattice, kagome and hexagonal lattice structures can be created. Rectangular lattices and (quasi-)one-dimensional structures such as ladders and diamond chain trapping potentials have also been created. Quantum spin models can be studied in all these geometries with Rydberg atoms, which allow for controlled interactions over several micrometers. We also present some nonperiodic geometries where the length scales of the traps are varied over a wide range. These tapered structures offer another way to transport large numbers of atoms adiabatically into subwavelength traps and back.

arXiv:1808.04131•Physical Review A•Feb 4, 2019•8 citations

Atom lithography of iron

te E Edwin Sligte

Atom lithography is a technique in which a light field is used to pattern an atomic beam. This patterned flux is then deposited onto a substrate, resulting in a nanostructured thin film. The smallest structures that have been made thus far using this technique are around 30 nm wide. This thesis investigates the technique, expanding its possibilities. The work-horse for the development of atom lithography has been Cr, as this transition metal atom has a closed transition in a wavelength range that is accessible to dye lasers. We extend the technique to Fe, the first ferromagnetic element to be used for atom lithography. The setup that was used to do this experiment is described, along with its critical design parameters. We present nanostructures that are typically 50 nm wide, and up to 4 nm high. The spacing between the nanolines is 186.05 nm. The nanostructure profile is compared to that of a simulated deposition process, and found to match. To the authors’ knowledge, this is the first demonstration of direct write atom lithography without laser cooling. A preliminary incursion into the magnetic properties of the nanostructures deposited is presented. In addition to giving an overview of the general ferromagnetic properties that might be expected, a deeper investigation of the magnetic anisotropy of the nanostructures deposited in this experiment is given. Novel resonant light masks are used in an experiment performed at the University of Konstanz (Germany). These light masks, using exactly instead of nearly resonant light, reveal some intriguing quantum mechanical effects. The most important of these features is the possibility to place structures closer together – at quarter wavelength spacings rather than half-wavelength intervals. Finally, the influence of surface diffusion on the structures obtained in an atom lithography experiment is investigated using kinetic Monte Carlo simulations. Several diffusion limiting effects are investigated; the influence of small amounts of residual reactive background gas is found to describe the experimental observations.

•Jan 1, 2005•1 citation
We report on the epitaxial growth and the characterization of thin FePt films and the subsequent patterning of magnetic lattice structures. These structures can be used to trap ultracold atoms for quantum simulation experiments. We use molecular beam epitaxy to deposit monocrystalline FePt films with a thickness of 50 nm. The films are characterized with X-ray scattering and Mössbauer spectroscopy to determine the long range order parameter and the hard magnetic axes. A high monocrystalline fraction was measured as well as a strong remanent magnetization of M = 900 kA/m and coercivity of 0.4 T. Using electron beam lithography and argon ion milling, we create lattice patterns with a period down to 200 nm, and a resolution of 30 nm. The resulting lattices are imaged in a scanning electron microscope in the cross-section created by a focused ion beam. A lattice with continuously varying lattice constant ranging from 5 μm down to 250 nm has been created to show the wide range of length scales that can now be created with this technique.
In this work FePt hard magnetic films were prepared with a thickness of 250 and 500 nm for making atom chips. We choose FePt because it has high magnetocrystalline anisotropy as well as high saturation magnetization. The FePt films were deposited at room temperature and at 350 °C using Molecular Beam Epitaxy on a Si substrate. After post annealing, the samples have high in-plane and out-of-plane coercivity (Hc = 8.0 kOe and 8.34 kOe, respectively) and remanent magnetization (Mr/Ms = 0.90, 0.93, respectively). Whereas the samples deposited at room temperature have many cracks on the surface, the samples deposited at 350 °C are free of cracks and their surfaces are mirror-like. The magnetized sample keeps the magnetization after baking in vacuum at 170 °C for 24 hours. A calculation shows that such samples can be used to trap cold atoms after lithographic patterning. (© 2004 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)
Abstract We report on the design, fabrication and characterization of magnetic nanostructures to create a lattice of magnetic traps with sub-micron period for trapping ultracold atoms. These magnetic nanostructures were fabricated by patterning a Co/Pd multilayered magnetic film grown on a silicon substrate using high precision e-beam lithography and reactive ion etching. The Co/Pd film was chosen for its small grain size and high remanent magnetization and coercivity. The fabricated structures are designed to magnetically trap 87 Rb atoms above the surface of the magnetic film with one-dimensional and two-dimensional (triangular and square) lattice geometries and sub-micron period. Such magnetic lattices can be used for quantum tunneling and quantum simulation experiments, including using geometries and periods that may be inaccessible with optical lattices.
We describe the fabrication and construction of a setup for creating lattices of magnetic microtraps for ultracold atoms on an atom chip. The lattice is defined by lithographic patterning of a permanent magnetic film. Patterned magnetic-film atom chips enable a large variety of trapping geometries over a wide range of length scales. We demonstrate an atom chip with a lattice constant of 10 μm, suitable for experiments in quantum information science employing the interaction between atoms in highly excited Rydberg energy levels. The active trapping region contains lattice regions with square and hexagonal symmetry, with the two regions joined at an interface. A structure of macroscopic wires, cutout of a silver foil, was mounted under the atom chip in order to load ultracold (87)Rb atoms into the microtraps. We demonstrate loading of atoms into the square and hexagonal lattice sections simultaneously and show resolved imaging of individual lattice sites. Magnetic-film lattices on atom chips provide a versatile platform for experiments with ultracold atoms, in particular for quantum information science and quantum simulation.
We have realized a two-dimensional permanent magnetic lattice of Ioffe-Pritchard microtraps for ultracold atoms. The lattice is formed by a single $300\text{\ensuremath{-}}\mathrm{nm}$ magnetized layer of FePt, patterned using optical lithography. Our magnetic lattice consists of more than 15 000 tightly confining microtraps with a density of 1250traps∕mm21250\phantom{\rule{0.3em}{0ex}}\text{traps}∕{\mathrm{mm}}^{2}1250traps∕mm2. Simple analytical approximations for the magnetic fields produced by the lattice are used to derive relevant trap parameters. We load ultracold atoms into at least 30 lattice sites at a distance of approximately $10\phantom{\rule{0.3em}{0ex}}\ensuremath{\mu}\mathrm{m}$ from the film surface. The present result is an important first step toward quantum information processing with neutral atoms in magnetic lattice potentials.
We have designed and realized magnetic trapping geometries for ultracold atoms based on permanent magnetic films. Magnetic chip based experiments give a high level of control over trap barriers and geometric boundaries in a compact experimental setup. These structures can be used to study quantum spin physics in a wide range of energies and length scales. By introducing defects into a triangular lattice, kagome and hexagonal lattice structures can be created. Rectangular lattices and (quasi-)one-dimensional structures such as ladders and diamond chain trapping potentials have also been created. Quantum spin models can be studied in all these geometries with Rydberg atoms, which allow for controlled interactions over several micrometers. We also present some nonperiodic geometries where the length scales of the traps are varied over a wide range. These tapered structures offer another way to transport large numbers of atoms adiabatically into subwavelength traps and back.
Atom lithography is a technique in which a light field is used to pattern an atomic beam. This patterned flux is then deposited onto a substrate, resulting in a nanostructured thin film. The smallest structures that have been made thus far using this technique are around 30 nm wide. This thesis investigates the technique, expanding its possibilities. The work-horse for the development of atom lithography has been Cr, as this transition metal atom has a closed transition in a wavelength range that is accessible to dye lasers. We extend the technique to Fe, the first ferromagnetic element to be used for atom lithography. The setup that was used to do this experiment is described, along with its critical design parameters. We present nanostructures that are typically 50 nm wide, and up to 4 nm high. The spacing between the nanolines is 186.05 nm. The nanostructure profile is compared to that of a simulated deposition process, and found to match. To the authors’ knowledge, this is the first demonstration of direct write atom lithography without laser cooling. A preliminary incursion into the magnetic properties of the nanostructures deposited is presented. In addition to giving an overview of the general ferromagnetic properties that might be expected, a deeper investigation of the magnetic anisotropy of the nanostructures deposited in this experiment is given. Novel resonant light masks are used in an experiment performed at the University of Konstanz (Germany). These light masks, using exactly instead of nearly resonant light, reveal some intriguing quantum mechanical effects. The most important of these features is the possibility to place structures closer together – at quarter wavelength spacings rather than half-wavelength intervals. Finally, the influence of surface diffusion on the structures obtained in an atom lithography experiment is investigated using kinetic Monte Carlo simulations. Several diffusion limiting effects are investigated; the influence of small amounts of residual reactive background gas is found to describe the experimental observations.