Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Japanese Journal of Applied Physics

Fluxon Observation Using a Josephson Sampler

Shigeki Sakai, Hiroshi Akoh, Hisao Hayakawa

Published Aug 1, 1983• 21 citations
Publisher

Abstract

A single fluxon and a bundle of fluxons propagating on a Josephson transmission line are observed by means of the direct coupled Josephson sampler. The half width of the observed pulse is less than 10 ps, and is 6.0 ps under an optimum condition. It is found that the number of fluxons can be controlled by a dc bias current biased at the edge of the transmission line.

DOI
10.1143/jjap.22.l479

Related papers

Direct observation of fluxon reflection in a Josephson transmission line

Hiroshi Akoh, Shigeki Sakai, S. Takada

We have directly observed the reflection of fluxons in a Josephson transmission line (JTL) with an open end using a Josephson sampler. Depending on the bias current at the end of the JTL, a reflected single fluxon, an antifluxon, and multi-antifluxons are observed with the measurements of the propagating time delay for the reflection process. The observed reflection properties, including the interaction between reflected antifluxons, are in fairly good agreement with numerical simulations taking account of the nonlinear shunting loss and the surface loss.

Physical review. B, Condensed matter•Apr 1, 1987•17 citations

Real time fluxon dynamics in josephson transmission line

Hiroshi Akoh, Shigeki Sakai, A. Yagi +1 more

Dynamics of fluxons propagating in a Josephson transmission line (JTL) have been studied in real time using Josephson sampling techniques. A JTL is an NbN-oxide-NbN Josephson junction with dimensions of 2.5 × 150 μm2, while Josephson samplers and pulse generators for generating and driving fluxons are fabricated by a Pb-alloy technology. Among the various behaviors, especially, it is found that a propagating fluxon can be made to pause without reflections at any desired position which is created by placing a resistor on the surface of a portion of a JTL. The surface resistor has a length larger than the Josephson penetration depth. A pausing fluxon can be re-driven by supplying a small current to the portion of the surface resistor after more than 100 μs, The experimental results are compared with computer simulations. Reflections of fluxons observed by samplers have also been discussed.

IEEE Transactions on Magnetics•Mar 1, 1985•32 citations

Fluxon Divider

Shigeki Sakai, Hiroshi Akoh, Hisao Hayakawa

A resistive-coupled fluxon divider consisting of Josephson transmission lines is designed and fabricated. Dynamic behavior of the divider is measured using two Josephson samplers connected to both output transmission lines, and successful operations are observed. It is also clarified that whether or not a fluxon signal can be transmitted to each output transmission line is determined mainly by the value of the bias current applied to each such line. Numerical simulations are made, and the results are in good agreement with the experimental ones.

Japanese Journal of Applied Physics•Sep 1, 1985•4 citations

Fluxon Transfer Device

Shigeki Sakai, Hiroshi Akoh, Hisao Hayakawa

A fluxon transfer device, consisting of a Josephson transmission line partially having a shunt resistor, is fabricated. Experiments are performed using a Josephson sampler. The results show that a fluxon stops at the resistively shunted portion and is moved again by applying a drive current, and that the stopping fluxon does not move for at least ∼100 µs, i.e., the stopping state is stable. The bit transfer time is as fast as ∼25 ps.

Japanese Journal of Applied Physics•Oct 1, 1985•15 citations

Fluxon Feedback Oscillator

Shigeki Sakai, Hiroshi Akoh, Hisao Hayakawa

A fluxon feedback oscillator which is formed by a ring-like Josephson transmission line with a feedback resistor is proposed. A device with a Josephson transmission line made by the NbN/NbN junction is fabricated, and the successful operation of the device is obtained using the Josephson sampler. The oscillation period can be controlled between 35 and 70 ps. The results agree well with simulation results. Possible applications of the fluxon feedback oscillator are also discussed.

Japanese Journal of Applied Physics•Aug 1, 1984•21 citations

Fluxon interaction in an overdamped Josephson transmission line

V. K. Kaplunenko

We have simulated fluxon propagation within a Josephson transmission line that is one of the elements of a rapid single flux quantum (RSFQ) circuit. This line is a parallel connection of damped Josephson junctions coupled by superconducting inductances. Geometries with and without mutual inductances between neighboring cells are considered. If the time interval between two fluxons is less than 0.3 φ0Vc−1 (Vc characteristic voltage) a repulsion between them was observed. The repulsion sets a specific time delay between the fluxons that impose a rigid limitation for high frequency performance of RSFQ logic. The delay depends on the shunting parameter, bias current, and values of interconnecting inductances.

Applied Physics Letters•Jun 12, 1995•47 citations
A single fluxon and a bundle of fluxons propagating on a Josephson transmission line are observed by means of the direct coupled Josephson sampler. The half width of the observed pulse is less than 10 ps, and is 6.0 ps under an optimum condition. It is found that the number of fluxons can be controlled by a dc bias current biased at the edge of the transmission line.
We have directly observed the reflection of fluxons in a Josephson transmission line (JTL) with an open end using a Josephson sampler. Depending on the bias current at the end of the JTL, a reflected single fluxon, an antifluxon, and multi-antifluxons are observed with the measurements of the propagating time delay for the reflection process. The observed reflection properties, including the interaction between reflected antifluxons, are in fairly good agreement with numerical simulations taking account of the nonlinear shunting loss and the surface loss.
Dynamics of fluxons propagating in a Josephson transmission line (JTL) have been studied in real time using Josephson sampling techniques. A JTL is an NbN-oxide-NbN Josephson junction with dimensions of 2.5 × 150 μm2, while Josephson samplers and pulse generators for generating and driving fluxons are fabricated by a Pb-alloy technology. Among the various behaviors, especially, it is found that a propagating fluxon can be made to pause without reflections at any desired position which is created by placing a resistor on the surface of a portion of a JTL. The surface resistor has a length larger than the Josephson penetration depth. A pausing fluxon can be re-driven by supplying a small current to the portion of the surface resistor after more than 100 μs, The experimental results are compared with computer simulations. Reflections of fluxons observed by samplers have also been discussed.
A resistive-coupled fluxon divider consisting of Josephson transmission lines is designed and fabricated. Dynamic behavior of the divider is measured using two Josephson samplers connected to both output transmission lines, and successful operations are observed. It is also clarified that whether or not a fluxon signal can be transmitted to each output transmission line is determined mainly by the value of the bias current applied to each such line. Numerical simulations are made, and the results are in good agreement with the experimental ones.
We have simulated fluxon propagation within a Josephson transmission line that is one of the elements of a rapid single flux quantum (RSFQ) circuit. This line is a parallel connection of damped Josephson junctions coupled by superconducting inductances. Geometries with and without mutual inductances between neighboring cells are considered. If the time interval between two fluxons is less than 0.3 φ0Vc−1 (Vc characteristic voltage) a repulsion between them was observed. The repulsion sets a specific time delay between the fluxons that impose a rigid limitation for high frequency performance of RSFQ logic. The delay depends on the shunting parameter, bias current, and values of interconnecting inductances.