Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Physical review. B, Condensed matter

Direct observation of fluxon reflection in a Josephson transmission line

Hiroshi Akoh, Shigeki Sakai, S. Takada

Published Apr 1, 1987• 17 citations
Publisher

Abstract

We have directly observed the reflection of fluxons in a Josephson transmission line (JTL) with an open end using a Josephson sampler. Depending on the bias current at the end of the JTL, a reflected single fluxon, an antifluxon, and multi-antifluxons are observed with the measurements of the propagating time delay for the reflection process. The observed reflection properties, including the interaction between reflected antifluxons, are in fairly good agreement with numerical simulations taking account of the nonlinear shunting loss and the surface loss.

DOI
10.1103/physrevb.35.5357

Related papers

Real time fluxon dynamics in josephson transmission line

Hiroshi Akoh, Shigeki Sakai, A. Yagi +1 more

Dynamics of fluxons propagating in a Josephson transmission line (JTL) have been studied in real time using Josephson sampling techniques. A JTL is an NbN-oxide-NbN Josephson junction with dimensions of 2.5 × 150 μm2, while Josephson samplers and pulse generators for generating and driving fluxons are fabricated by a Pb-alloy technology. Among the various behaviors, especially, it is found that a propagating fluxon can be made to pause without reflections at any desired position which is created by placing a resistor on the surface of a portion of a JTL. The surface resistor has a length larger than the Josephson penetration depth. A pausing fluxon can be re-driven by supplying a small current to the portion of the surface resistor after more than 100 μs, The experimental results are compared with computer simulations. Reflections of fluxons observed by samplers have also been discussed.

IEEE Transactions on Magnetics•Mar 1, 1985•32 citations

Fluxon Observation Using a Josephson Sampler

Shigeki Sakai, Hiroshi Akoh, Hisao Hayakawa

A single fluxon and a bundle of fluxons propagating on a Josephson transmission line are observed by means of the direct coupled Josephson sampler. The half width of the observed pulse is less than 10 ps, and is 6.0 ps under an optimum condition. It is found that the number of fluxons can be controlled by a dc bias current biased at the edge of the transmission line.

Japanese Journal of Applied Physics•Aug 1, 1983•21 citations

Fluxon interaction in an overdamped Josephson transmission line

V. K. Kaplunenko

We have simulated fluxon propagation within a Josephson transmission line that is one of the elements of a rapid single flux quantum (RSFQ) circuit. This line is a parallel connection of damped Josephson junctions coupled by superconducting inductances. Geometries with and without mutual inductances between neighboring cells are considered. If the time interval between two fluxons is less than 0.3 φ0Vc−1 (Vc characteristic voltage) a repulsion between them was observed. The repulsion sets a specific time delay between the fluxons that impose a rigid limitation for high frequency performance of RSFQ logic. The delay depends on the shunting parameter, bias current, and values of interconnecting inductances.

Applied Physics Letters•Jun 12, 1995•47 citations

Fluxon Divider

Shigeki Sakai, Hiroshi Akoh, Hisao Hayakawa

A resistive-coupled fluxon divider consisting of Josephson transmission lines is designed and fabricated. Dynamic behavior of the divider is measured using two Josephson samplers connected to both output transmission lines, and successful operations are observed. It is also clarified that whether or not a fluxon signal can be transmitted to each output transmission line is determined mainly by the value of the bias current applied to each such line. Numerical simulations are made, and the results are in good agreement with the experimental ones.

Japanese Journal of Applied Physics•Sep 1, 1985•4 citations

Subpicosecond measurements of the response of Josephson transmission lines to large current pulses

M. Currie, Roman Sobolewski, T.Y. Hsiang

Josephson transmission lines (JTLs) are commonly used as signal interconnects in single-flux quantum (SFQ) circuits. They are also used, however, to transform arbitrary waveforms into SFQ pulses. Here we use a low-temperature electro-optic sampling system with subpicosecond resolution to observe the response of a JTL to a picosecond input pulse. Previously, this system has been used to directly observe SFQ pulses on niobium transmission lines. In our experiment, niobium metal semiconductor-metal (MSM) photodiodes were connected to 3, 4, 19, and 20-stage JTLs. The MSM photodiodes provided picosecond pulses to excite the JTL. The JTL bias and input pulse amplitude were varied to observe fluxon interaction and time delay of the JTL stages. Observed JTL behavior is dominated by dipolar oscillations radiated from the first stages of the JTL. By varying the values of line inductance and junction capacitance, thus changing the oscillation periods, these oscillations were traced to the coupling of the junction capacitance and line inductance. This is a new feature of the JTL that has thus far not been observed or incorporated into simulations. Our results could have significant implications on the limit of SFQ circuits.

IEEE Transactions on Applied Superconductivity•Jun 1, 1999•2 citations

Dynamical properties of fluxon propagation in a Josephson transmission line with a trigger turning point

Akira Fujimaki, Koji Nakajima, Yasuji Sawada

Dynamical properties of fluxon propagation in a discrete Josephson transmission line are reported. The circuit consists of three Josephson transmission lines and a trigger turning point. By using the Josephson sampler, we confirmed fan-out operation of the phase-mode logic circuit in which single fluxons were employed as information bits. We measured the fluxon velocity propagating in the Josephson transmission line. The measured velocity of 3.38×107 m/s was larger than that of the continuous Josephson transmission line, and it is a manifestation of a remarkable feature of the discrete Josephson transmission line. The experimental results affirm the high-speed operation of the phase-mode circuits constructed by discrete Josephson transmission lines.

Journal of Applied Physics•Jun 15, 1987•12 citations
We have directly observed the reflection of fluxons in a Josephson transmission line (JTL) with an open end using a Josephson sampler. Depending on the bias current at the end of the JTL, a reflected single fluxon, an antifluxon, and multi-antifluxons are observed with the measurements of the propagating time delay for the reflection process. The observed reflection properties, including the interaction between reflected antifluxons, are in fairly good agreement with numerical simulations taking account of the nonlinear shunting loss and the surface loss.
Dynamics of fluxons propagating in a Josephson transmission line (JTL) have been studied in real time using Josephson sampling techniques. A JTL is an NbN-oxide-NbN Josephson junction with dimensions of 2.5 × 150 μm2, while Josephson samplers and pulse generators for generating and driving fluxons are fabricated by a Pb-alloy technology. Among the various behaviors, especially, it is found that a propagating fluxon can be made to pause without reflections at any desired position which is created by placing a resistor on the surface of a portion of a JTL. The surface resistor has a length larger than the Josephson penetration depth. A pausing fluxon can be re-driven by supplying a small current to the portion of the surface resistor after more than 100 μs, The experimental results are compared with computer simulations. Reflections of fluxons observed by samplers have also been discussed.
We have simulated fluxon propagation within a Josephson transmission line that is one of the elements of a rapid single flux quantum (RSFQ) circuit. This line is a parallel connection of damped Josephson junctions coupled by superconducting inductances. Geometries with and without mutual inductances between neighboring cells are considered. If the time interval between two fluxons is less than 0.3 φ0Vc−1 (Vc characteristic voltage) a repulsion between them was observed. The repulsion sets a specific time delay between the fluxons that impose a rigid limitation for high frequency performance of RSFQ logic. The delay depends on the shunting parameter, bias current, and values of interconnecting inductances.
A resistive-coupled fluxon divider consisting of Josephson transmission lines is designed and fabricated. Dynamic behavior of the divider is measured using two Josephson samplers connected to both output transmission lines, and successful operations are observed. It is also clarified that whether or not a fluxon signal can be transmitted to each output transmission line is determined mainly by the value of the bias current applied to each such line. Numerical simulations are made, and the results are in good agreement with the experimental ones.
Josephson transmission lines (JTLs) are commonly used as signal interconnects in single-flux quantum (SFQ) circuits. They are also used, however, to transform arbitrary waveforms into SFQ pulses. Here we use a low-temperature electro-optic sampling system with subpicosecond resolution to observe the response of a JTL to a picosecond input pulse. Previously, this system has been used to directly observe SFQ pulses on niobium transmission lines. In our experiment, niobium metal semiconductor-metal (MSM) photodiodes were connected to 3, 4, 19, and 20-stage JTLs. The MSM photodiodes provided picosecond pulses to excite the JTL. The JTL bias and input pulse amplitude were varied to observe fluxon interaction and time delay of the JTL stages. Observed JTL behavior is dominated by dipolar oscillations radiated from the first stages of the JTL. By varying the values of line inductance and junction capacitance, thus changing the oscillation periods, these oscillations were traced to the coupling of the junction capacitance and line inductance. This is a new feature of the JTL that has thus far not been observed or incorporated into simulations. Our results could have significant implications on the limit of SFQ circuits.
Dynamical properties of fluxon propagation in a discrete Josephson transmission line are reported. The circuit consists of three Josephson transmission lines and a trigger turning point. By using the Josephson sampler, we confirmed fan-out operation of the phase-mode logic circuit in which single fluxons were employed as information bits. We measured the fluxon velocity propagating in the Josephson transmission line. The measured velocity of 3.38×107 m/s was larger than that of the continuous Josephson transmission line, and it is a manifestation of a remarkable feature of the discrete Josephson transmission line. The experimental results affirm the high-speed operation of the phase-mode circuits constructed by discrete Josephson transmission lines.