Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Physics Procedia

Parasitic Losses in Nb Superconducting Resonators

J. M. Hornibrook, E.E. Mitchell, Chris Lewis, D. J. Reilly

Published Jan 1, 2012• 4 citations
Publisher

Abstract

Microwave losses in niobium (Nb) superconducting resonators are investigated at milli-Kelvin temperatures and with low drive power. In addition to the well-known suppression in Q-factor that arises from coupling between the resonator and two-level defects in the dielectric substrate, we report strong dependence of the measured Q-factor and resonance line-shape on the electromagnetic environment. Methods to suppress parasitic coupling between the resonator and its environment are discussed.

DOI
10.1016/j.phpro.2012.06.069

Related papers

Superconducting Resonators with Parasitic Electromagnetic Environments

J. M. Hornibrook, E.E. Mitchell, D. J. Reilly

Parasitic electromagnetic fields are shown to strongly suppress the quality (Q)-factor of superconducting coplanar waveguide resonators via non-local dissipation in the macroscopic environment. Numerical simulation and low temperature measurements demonstrate how this parasitic loss can be reduced, establishing a Lorentzian lineshape in the resonator frequency response and yielding a loaded Q-factor of 2.4 x 10^5 for niobium devices on sapphire substrates. In addition, we report the dependence of the Q and resonance frequency shift Delta f_0 with input power and temperature in the limit where loss from two-level systems in the dielectric dominate.

arXiv:1203.4442•Mar 20, 2012•7 citations

Suppressing Dissipative Paths in Superconducting Coplanar Waveguide Resonators

J. M. Hornibrook, E.E. Mitchell, D. J. Reilly

The electromagnetic environment can have a significant effect on the resonant line-shape and loadedQ-factor of superconducting coplanar waveguides in the low temperature (<; 100 mK) and low microwave power regime. Here, electromagnetic simulations are used to visualize the electric field strength throughout the resonator environment, highlighting situations in which parasitic modes lead to increased dissipation. Methods used to suppress parasitic coupling include increasing the density of wire bonds and vias, reducing the width of the transmission line (whilst maintaining the characteristic impedance at 50 Ω) and establishing strong grounding to the sample enclosure. The effect of reducing the parasitic coupling on the microwave transmission spectrum is reported.

IEEE Transactions on Applied Superconductivity•Apr 5, 2013•7 citations

The effect of niobium thin film structure on losses in superconducting circuits

Maxwell Drimmer, Sjoerd Telkamp, Felix L Fischer +7 more

Abstract The performance of superconducting microwave circuits is strongly influenced by the material properties of the superconducting film and substrate. While progress has been made in understanding the importance of surface preparation and the effect of surface oxides, the complex effect of superconductor film structure on microwave losses is not yet fully understood. In this study, we investigate the microwave properties of niobium resonators with different crystalline properties and related surface topographies. We analyze a series of magnetron sputtered films in which the Nb crystal orientation and surface topography are changed by varying the substrate temperatures between room temperature and 975 K. The lowest-loss resonators that we measure have quality factors of over 10 6 at single-photon powers, among the best ever recorded using the Nb on sapphire platform. We observe the highest quality factors in films grown at an intermediate temperature regime of the growth series (550 K) where the films display both preferential ordering of the crystal domains and low surface roughness. Furthermore, we analyze the temperature-dependent behavior of our resonators to learn about how the quasiparticle density in the Nb film is affected by the niobium crystal structure and the presence of grain boundaries. Our results stress the connection between the crystal structure of superconducting films and the loss mechanisms suffered by the resonators and indicate that even a moderate change in temperature during thin film deposition can significantly affect the resulting quality factors.

arXiv:2403.12164•Materials for Quantum Technology•Oct 14, 2025•22 citations

Loss mechanisms in superconducting thin film microwave resonators

Jan Goetz, Frank Deppe, Max Haeberlein +10 more

We present a systematic analysis of the internal losses of superconducting coplanar waveguide microwave resonators based on niobium thin films on silicon substrates. In particular, we investigate losses introduced by Nb/Al interfaces in the center conductor, which is important for experiments where Al based Josephson junctions are integrated into Nb based circuits. We find that these interfaces can be a strong source for two-level state (TLS) losses, when the interfaces are not positioned at current nodes of the resonator. In addition to TLS losses, for resonators including Al, quasiparticle losses become relevant above 200 mK. Finally, we investigate how losses generated by eddy currents in conductive material on the backside of the substrate can be minimized by using thick enough substrates or metals with high conductivity on the substrate backside.

arXiv:1510.05957•Journal of Applied Physics•Jan 5, 2016•69 citations

Low-temperature characterization of dielectric loss at microwave frequencies in aluminum oxide

Martin R. Otto

Superconducting quantum devices have gained increasing interest over the past 15 years because of their role as promising candidates for implementing a large-scale quantum computer and as ultra-sensitive detectors. Superconducting resonators are one type of superconducting device which are used in a variety of applications including quantum computing and radioastronomy. They can achieve large quality factors which are important for these applications and a variety of others. Specific examples of these applications include the readout and coupling of superconducting qubits and also microwave kinetic inductance detector arrays for sub-mm wavelength astronomical measurements. High quality factors also enable the study of very subtle features in the electromagnetic response of the resonator. This feature in turn offers provides a method to characterize loss mechanisms which affect the performance of superconducting qubits, by measuring the quality factor of a resonator. Dielectric loss is an example of such a loss mechanism, and is considered to be one of, if not \\it the \\rm major obstacle to overcome in order to construct scalable quantum technologies based on superconducting devices. This type of loss arises from the coupling of the electric field in the device to spurious degrees of freedom which arise naturally the dielectric environment of the device. The fast-growing interest in the physics and applications of superconducting resonators has renewed interest in an improving our fundamental understanding of dielectric loss. This interest involves the study of a much bigger and older question in condensed matter physics; namely, what is the microscopic physics which governs the behaviour and of an amorphous material at low-temperatures? \n \nIn this thesis, we present a systematic study of dielectric loss in amorphous aluminum oxide using superconducting microwave resonators. Measurements of the intrinsic loss tangent over a large temperature range of 40~mK to 1~K are presented and analyzed in detail. Some aspects of the data are well understood in terms of the standard tunnelling two-level system model, while others require a deeper analysis of the electrodynamics of the resonator and insights from more advanced theories. We employ a consistent approach using numerical simulations of the resonator to understand loss mechanisms arising from both an inhomogeneous electric field and multiple dielectric layers. We measure saturation effects which provide insight into coherent properties of two-level system ensembles and the mutual interaction between them. Excellent agreement with the two-level system model is found for intrinsic losses, however the strong dependence on temperature which we observe for saturation effects is not predicted in the standard form of the model. We find that this dependence can be understood in terms of the theory of spectral diffusion which is consistent with a strong mutual interaction between two-level systems contributes to broadening of their spectral linewidths.

•Apr 9, 2015•1 citation

Power-dependence measurement of the quality factor of superconducting microwave resonators at mK temperature

Seon Hoo Kim, Dong-Gwang Ha, Gwan Yeol Park +7 more

We report our setup and measurement results of the quality factor Q of superconducting microwave resonators at mK temperature in a dilution refrigerator. The power dependence of the superconducting resonators' Q was measured down to the single photon level. Measurements were performed on two types of microwave resonators. First, a half-wavelength coplanar waveguide (CPW) resonator made of niobium film on an oxidized high-resistivity silicon substrate was measured. Then a rectangular box resonator made of machined superconducting aluminum alloy was measured. While the CPW chip resonator's Q value showed noticeable decrease at low microwave power, the box resonator's Q showed little power dependence. This setup is intended to perform characterization of various microwave resonators, which will serve as key components in superconducting qubit in circuit QED architecture.

Conference on Precision Electromagnetic Measurements•Aug 1, 2014•2 citations
Microwave losses in niobium (Nb) superconducting resonators are investigated at milli-Kelvin temperatures and with low drive power. In addition to the well-known suppression in Q-factor that arises from coupling between the resonator and two-level defects in the dielectric substrate, we report strong dependence of the measured Q-factor and resonance line-shape on the electromagnetic environment. Methods to suppress parasitic coupling between the resonator and its environment are discussed.
Parasitic electromagnetic fields are shown to strongly suppress the quality (Q)-factor of superconducting coplanar waveguide resonators via non-local dissipation in the macroscopic environment. Numerical simulation and low temperature measurements demonstrate how this parasitic loss can be reduced, establishing a Lorentzian lineshape in the resonator frequency response and yielding a loaded Q-factor of 2.4 x 10^5 for niobium devices on sapphire substrates. In addition, we report the dependence of the Q and resonance frequency shift Delta f_0 with input power and temperature in the limit where loss from two-level systems in the dielectric dominate.
The electromagnetic environment can have a significant effect on the resonant line-shape and loadedQ-factor of superconducting coplanar waveguides in the low temperature (<; 100 mK) and low microwave power regime. Here, electromagnetic simulations are used to visualize the electric field strength throughout the resonator environment, highlighting situations in which parasitic modes lead to increased dissipation. Methods used to suppress parasitic coupling include increasing the density of wire bonds and vias, reducing the width of the transmission line (whilst maintaining the characteristic impedance at 50 Ω) and establishing strong grounding to the sample enclosure. The effect of reducing the parasitic coupling on the microwave transmission spectrum is reported.
Abstract The performance of superconducting microwave circuits is strongly influenced by the material properties of the superconducting film and substrate. While progress has been made in understanding the importance of surface preparation and the effect of surface oxides, the complex effect of superconductor film structure on microwave losses is not yet fully understood. In this study, we investigate the microwave properties of niobium resonators with different crystalline properties and related surface topographies. We analyze a series of magnetron sputtered films in which the Nb crystal orientation and surface topography are changed by varying the substrate temperatures between room temperature and 975 K. The lowest-loss resonators that we measure have quality factors of over 10 6 at single-photon powers, among the best ever recorded using the Nb on sapphire platform. We observe the highest quality factors in films grown at an intermediate temperature regime of the growth series (550 K) where the films display both preferential ordering of the crystal domains and low surface roughness. Furthermore, we analyze the temperature-dependent behavior of our resonators to learn about how the quasiparticle density in the Nb film is affected by the niobium crystal structure and the presence of grain boundaries. Our results stress the connection between the crystal structure of superconducting films and the loss mechanisms suffered by the resonators and indicate that even a moderate change in temperature during thin film deposition can significantly affect the resulting quality factors.
We present a systematic analysis of the internal losses of superconducting coplanar waveguide microwave resonators based on niobium thin films on silicon substrates. In particular, we investigate losses introduced by Nb/Al interfaces in the center conductor, which is important for experiments where Al based Josephson junctions are integrated into Nb based circuits. We find that these interfaces can be a strong source for two-level state (TLS) losses, when the interfaces are not positioned at current nodes of the resonator. In addition to TLS losses, for resonators including Al, quasiparticle losses become relevant above 200 mK. Finally, we investigate how losses generated by eddy currents in conductive material on the backside of the substrate can be minimized by using thick enough substrates or metals with high conductivity on the substrate backside.
Superconducting quantum devices have gained increasing interest over the past 15 years because of their role as promising candidates for implementing a large-scale quantum computer and as ultra-sensitive detectors. Superconducting resonators are one type of superconducting device which are used in a variety of applications including quantum computing and radioastronomy. They can achieve large quality factors which are important for these applications and a variety of others. Specific examples of these applications include the readout and coupling of superconducting qubits and also microwave kinetic inductance detector arrays for sub-mm wavelength astronomical measurements. High quality factors also enable the study of very subtle features in the electromagnetic response of the resonator. This feature in turn offers provides a method to characterize loss mechanisms which affect the performance of superconducting qubits, by measuring the quality factor of a resonator. Dielectric loss is an example of such a loss mechanism, and is considered to be one of, if not \\it the \\rm major obstacle to overcome in order to construct scalable quantum technologies based on superconducting devices. This type of loss arises from the coupling of the electric field in the device to spurious degrees of freedom which arise naturally the dielectric environment of the device. The fast-growing interest in the physics and applications of superconducting resonators has renewed interest in an improving our fundamental understanding of dielectric loss. This interest involves the study of a much bigger and older question in condensed matter physics; namely, what is the microscopic physics which governs the behaviour and of an amorphous material at low-temperatures? \n \nIn this thesis, we present a systematic study of dielectric loss in amorphous aluminum oxide using superconducting microwave resonators. Measurements of the intrinsic loss tangent over a large temperature range of 40~mK to 1~K are presented and analyzed in detail. Some aspects of the data are well understood in terms of the standard tunnelling two-level system model, while others require a deeper analysis of the electrodynamics of the resonator and insights from more advanced theories. We employ a consistent approach using numerical simulations of the resonator to understand loss mechanisms arising from both an inhomogeneous electric field and multiple dielectric layers. We measure saturation effects which provide insight into coherent properties of two-level system ensembles and the mutual interaction between them. Excellent agreement with the two-level system model is found for intrinsic losses, however the strong dependence on temperature which we observe for saturation effects is not predicted in the standard form of the model. We find that this dependence can be understood in terms of the theory of spectral diffusion which is consistent with a strong mutual interaction between two-level systems contributes to broadening of their spectral linewidths.
We report our setup and measurement results of the quality factor Q of superconducting microwave resonators at mK temperature in a dilution refrigerator. The power dependence of the superconducting resonators' Q was measured down to the single photon level. Measurements were performed on two types of microwave resonators. First, a half-wavelength coplanar waveguide (CPW) resonator made of niobium film on an oxidized high-resistivity silicon substrate was measured. Then a rectangular box resonator made of machined superconducting aluminum alloy was measured. While the CPW chip resonator's Q value showed noticeable decrease at low microwave power, the box resonator's Q showed little power dependence. This setup is intended to perform characterization of various microwave resonators, which will serve as key components in superconducting qubit in circuit QED architecture.