Researchers develop a new type of superconducting quantum interference device (SQUID) with significantly enhanced sensitivity and bandwidth, which can function as a general-purpose magnetic sensor.
Spin-exchange relaxation-free (SERF) atomic magnetometers are the promising non-cryogenic sensors to potentially replace the superconducting quantum interference device (SQUID) in the ultra-weak magnetic-field measurements. Although the SERF magnetometers have achieved a sensitivity of sub-femtotesla, the bandwidth is limited at a narrow range. In this work, we developed a closed-loop SERF magnetometer under proportional-integral (PI) control, the bandwidth could be adaptively tuned and extended above 1.2 kHz. A nearly 40-fold enhancement of the typical bandwidth was achieved in comparison with the open-loop system and the sensitivity was maintained at 15 fT/Hz1/2from 30 Hz to 750 Hz. Moreover, the magnetic field dynamic range could also be greatly improved. This proposed atomic magnetometer with higher bandwidth, sensitivity, and dynamic range has a good prospect in developing a compact, portable, and non-cryogenic magnetic field sensor and may find more applications in biomedical, nuclear magnetic resonance, and fundamental physics research.
Quantum sensors and metrology harness quantum phenomena—such as superposition, entanglement, and squeezing—to achieve precision measurements beyond classical limits. This review presents an overview of the fundamental principles underlying quantum sensing, including quantum coherence, entanglement-assisted measurement, and quantum-enhanced interferometry. Various quantum sensor platforms are discussed, including atomic clocks, nitrogen-vacancy (NV) center magnetometers, superconducting quantum interference devices (SQUIDs), optomechanical sensors, and trapped-ion systems. We explore their operational mechanisms, performance metrics, and technological implementations. Comparative analyses highlight sensitivity, spatial resolution, bandwidth, and environmental robustness. Advances in materials, control techniques, and hybrid architectures are examined, and emerging applications in navigation, geophysics, medical imaging, and fundamental physics are reviewed. Finally, future prospects for scalable and robust quantum metrology are discussed.
SQUIDs (superconducting quantum interference devices) have been in use for more than half a century and constitute one of the first macroscopic quantum devices. SQUIDs operating at millikelvin temperatures can act as qubits for quantum computers and the recent reports of more than 50 qubit circuits indicate how far the technology has developed. In this talk, the author will describe two other applications of SQUIDs as quantum detectors, focusing on single spin and single photon energy resolving detection. Most superconducting devices rely on tri-layer Josephson tunnel junctions which are not easily scalable to the nanoscale. We have developed a Josephson junction fabrication method, based on electron beam lithography or focused ion beam milling of a single thin film of superconductor (Nb generally) which can provide sizes down to 50 nm. These devices are particularly relevant for two main applications in quantum technology and metrology. First, by shrinking the size of the SQUID loop and the junctions to around 200 nm, the sensitivity of the SQUID for magnetization measurements is improved to the level where a single electron spin flip may be detected. This is possible at the relatively elevated temperature of 4K.
We are working with Surrey University to implant single magnetic ions within the SQUID loop to provide a platform to test this combination as the basis for a new form of qubit operating at higher temperatures than the conventional Transmon superconducting devices. A second SQUID based detector which we are developing is an inductive transition edge sensor device (ISTED) for energy resolving measurements of single photons. This is based on the development of conventional transition edge sensors where we detect the change of the penetration depth of a small thin film of superconductor when it absorbs a photon. In this way, a major source of noise in conventional TES may be avoided since the absorber remains in the superconducting state at all times. In this way we have demonstrated single photon detection at 633 nm with 0.1eV resolution at operating temperature of 7.5K.