We analyze a superconducting charge qubit that is dispersively coupled to an electric resonator. The system is connected to a transmission line that allows a reflection measurement. In this paper we derive the equations of motion of the system by using the quantum network theory. We assume that the measurement signal is so strong that the resonator behaves classically. The time evolution of the qubit is calculated with the Bloch equations. We have simulated the system in the adiabatic eigenbasis of the qubit to bring out the effects of the changing band curvatures under strong driving. We use circuit theory to calculate the energy flow in different parts of the circuit.
We analyze a superconducting charge qubit that is dispersively coupled to an electric resonator. The system is connected to a transmission line that allows a reflection measurement. In this paper we derive the equations of motion of the system by using the quantum network theory. We assume that the measurement signal is so strong that the resonator behaves classically. The time evolution of the qubit is calculated with the Bloch equations. We have simulated the system in the adiabatic eigenbasis of the qubit to bring out the effects of the changing band curvatures under strong driving. We use circuit theory to calculate the energy flow in different parts of the circuit.
We present a theoretical study of a superconducting charge qubit dispersively coupled to a transmission line resonator. Starting from a master equation description of this coupled system and using a polaron transformation, we obtain an exact effective master equation for the qubit. We then use quantum trajectory theory to investigate the measurement of the qubit by continuous homodyne measurement of the resonator out field. Using the same polaron transformation, a stochastic master equation for the conditional state of the qubit is obtained. From this result, various definitions of the measurement time are studied. Furthermore, we find that in the limit of strong homodyne measurement, typical quantum trajectories for the qubit exhibit a crossover from diffusive to jumplike behavior. Finally, in the presence of Rabi drive on the qubit, the qubit dynamics is shown to exhibit quantum Zeno behavior.
The quantum state of a superconducting qubit nonresonantly coupled to a transmission line resonator can be determined by measuring the quadrature amplitudes of an electromagnetic field transmitted through the resonator. We present experiments in which we analyze in detail the dynamics of the transmitted field as a function of the measurement frequency for both weak continuous and pulsed measurements. We find excellent agreement between our data and calculations based on a set of Bloch-type differential equations for the cavity field derived from the dispersive Jaynes-Cummings Hamiltonian including dissipation. We show that the measured system response can be used to construct a measurement operator from which the qubit population can be inferred accurately. Such a measurement operator can be used in tomographic methods to reconstruct single and multiqubit states in ensemble-averaged measurements.
The speed and fidelity of dispersive readout of superconducting qubits should improve by increasing the amplitude of the measurement drive. Experiments show, however, that beyond some drive amplitude there is always a saturation or drop in fidelity, often associated with a decrease in qubit energy relaxation time T1. A simple Lindblad master equation does not capture the latter effect. More involved approaches based on effective master equations rely on strong assumptions about the spectra of the system and the bath and only partially agree with observations. Here, we perform a first-principles simulation of the full unitary dynamics of dispersive readout by considering the circuit QED Hamiltonian coupled to a microscopic model for the measurement transmission line, allowing for its arbitrary spectrum, including filters. Our access to the dynamics of the bath degrees of freedom allows us to investigate the emission spectrum of the system as a function of drive power. We show how the dependence of qubit T1 on readout drive amplitude is sensitive to the details of the bath spectrum. In particular, we find that T1 drops with increasing drive amplitude when a Purcell notch filter is placed at the qubit frequency, and that the Lindblad master equation shows general qualitative defects compared to the first-principles model.
We analyze the dispersive readout of superconducting charge and flux qubits as a quantum measurement process. The measurement oscillator frequency is considered much lower than the qubit frequency. This regime is interesting because large detuning allows for strong coupling between the measurement oscillator and the signal transmission line, thus allowing for fast readout. Due to the large detuning we may not use the rotating wave approximation in the oscillator-qubit coupling. Instead we start from an approximation where the qubit follows the oscillator adiabatically, and show that non-adiabatic corrections are small. We find analytic expressions for the measurement time, as well as for the back-action, both while measuring and in the off-state. The quantum efficiency is found to be unity within our approximation, both for charge and flux qubit readout.
Superconducting flux qubits have many advantages as a storage of quantum information, such as broad range tunability of frequency, small-size fabricability, and high controllability. In the flux qubit-oscillator, qubits are connected to SQUID resonators for the purpose of performing dispersive non-destructive readouts of qubit signals with high fidelity. In this work, we propose a theoretical model for analyzing quantum characteristics of a flux qubit-oscillator on the basis of quantum solutions obtained using a unitary transformation approach. The energy levels of the combined system (qubit + resonator) are analyzed in detail. Equally spaced each energy level of the resonator splits into two parts depending on qubit states. Besides, coupling of the qubit to the resonator brings about an additional modification in the split energy levels. So long as the coupling strength and the tunnel splitting are not zero but finite values, the energy-level splitting of the resonator does not disappear. We conclude that quantum nondemolition dispersive measurements of the qubit states are possible by inducing bifurcation of the resonator states through the coupling.
The topic of this thesis is superconducting electric circuits. Technical advances have made possible the experimental study of Josephson junction based circuit elements which sustain quantum mechanical properties long enough to be denoted as quantum devices. The quantum state can be controlled with electronic variables and measured using standard electrical setups. The research is motivated by the possibility to examine quantum phenomena in circumstances that can be customized, prospects of new quantum devices, and the development of quantum information processing. This thesis presents theoretical studies on the nonlinear and stochastic driving of a superconducting quantum two-level system (qubit). We first investigate the energy level shifts a single-Cooper-pair transistor under large amplitude driving realized via the inherently nonlinear Josephson energy by using an external magnetic flux. The effective driving field substantially deviates from a circular polarization and linear coupling. The energy level shifts are compared to the cases of a vanishing and a weak driving field, measured as the Stark shift and the generalized Bloch-Siegert shift, respectively. We describe criteria for the natural basis of the analytical and the numerical calculations. In addition to that, we develop a formalism based on the Floquet method for the weak probe measurement of the strongly driven qubit. In the latter part of the thesis research, we study utilization of a stochastic driving field whose time evolution is not regular but follows probabilistic laws. We concentrate on the motional averaging phenomenon and show that it can be measured with an unparalleled accuracy by employing a flux-modulated transmon qubit. As the stochastically modulated qubit is simultaneously measured with a moderate driving field, we develop a theoretical description accounting the possible interference effects between the modulation and the drive. The comparison with experimental results shows good agreement. Motional averaging phenomenon can be applied to estimate the properties of fluctuation processes occurring in qubits, e.g., the quasiparticle tunneling or the photon shot noise. Resting on the motional averaging, we anticipate that the qubit dephasing times can be improved if one can accelerate the dynamics of two-level fluctuators. We apply a semiclassical formalism where the qubit is treated with quantum mechanical concepts whereas the driving fields are classical. In the solution procedure, the numerical results support the main analytical understanding. As the theoretical results are extensively compared to reflection measurements, we construct an explicit connection between the dynamics of the studied quantum devices and the measured reflection coefficient.